djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
29,323 Commits 21 Branches 274 Tags 785 MiB
403a5b2681
Commit Graph

203 Commits

Author SHA1 Message Date
Scott Shawcroft
931757f4a9
Improve web workflow responsiveness 
1. Run the socket select task at the same priority as CP. This is
  needed because it queues up the background work. Without it, CP
  needed to sleep to let the lower priority task go.
2. Close the active socket on disconnect. This prevents looping
  over a disconnected but not closed socket.

Fixes #6610. Fixes #6613
 2022-07-26 15:29:49 -07:00
Scott Shawcroft
6d6234443d
Merge remote-tracking branch 'adafruit/main' into web_workflow_port 2022-07-25 15:57:58 -07:00
Aria Burrell
868a03ff57 Fixed empty characteristic issue with bleio+nimble. 
- Based on espressif/nimble's blecent example code. Confirms that the characteristic is not empty before trying to catalogue its descriptors.
- Running ble_gattc_disc_all_dscs on empty (no length) characteristics fails with the (not-very-informative) BLE_HS_EINVAL error if this check is not performed.
 2022-07-17 04:50:50 -06:00
Scott Shawcroft
78b4159448
Allow for dynamic reconfigure including port 2022-07-15 16:33:12 -07:00
Jeff Epler
4e6fa55cba
Merge pull request #6591 from tannewt/web_workflow_ticks 
Add socket select task to wake CP
 2022-07-15 18:30:43 -05:00
Scott Shawcroft
6e7fdcc24b
Add wait for MDNS hostname to be set 2022-07-15 13:48:19 -07:00
Scott Shawcroft
145cce93da
Merge pull request #6596 from Neradoc/ble-name-in-dotenv 
Setup default BLE name in dotenv
 2022-07-14 15:46:28 -07:00
Jeff Epler
dcc27a8c88
Need to ensure wifi radio is set enabled again on esp32 
.. otherwise, nothing set it enabled on the second soft reboot.
 2022-07-14 15:09:26 -05:00
Jeff Epler
72f5537027
esp32: don't fully reset the wifi device 
.. this makes reconnecting without a full reset not work.

Because this works on other generations of the esp32 (c2, c3, etc),
apply this behavior only to esp32.

After this change, it's possible to connect multiple times to wifi in
different runs of code.py or the repl after soft rebooting.
 2022-07-14 15:01:15 -05:00
Neradoc
5ca6d8953d use available constants instead of testing errors for length 2022-07-14 11:55:53 +02:00
Neradoc
50a9beda04 Retrieve the BLE name from dotenv if available 
Format:
CIRCUITPY_BLE_NAME = My BLE Board

- the length is limited to 31 characters
- for the NRF version it repeatedly truncates the name if it's too long
- the ESP version defaults to "nimble" if the name is too long
 2022-07-14 11:55:53 +02:00
Scott Shawcroft
e9dd254127
Add socket select task to wake CP 
This fixes the web workflow on boards without a display.

Fixes #6552
 2022-07-13 17:35:35 -07:00
Scott Shawcroft
ac460dd1e1
Merge branch 'main' into esp32 2022-07-13 15:30:53 -07:00
Jeff Epler
5c6ee20ca5
on esp32 need to initialize nvs before starting wifi 
Also, change error handling so that the esp-idf error number
is shown in the traceback in the case of an error.

This allows scanning & connecting to work. I didn't try requests yet.
 2022-07-13 11:57:38 -05:00
Scott Shawcroft
23bbb19138
Merge remote-tracking branch 'adafruit/main' into websocket_serial 2022-07-12 13:15:38 -07:00
Tod Kurt
a658007673
Update ports/espressif/common-hal/wifi/Radio.c 
Co-authored-by: Dan Halbert <halbert@halwitz.org>
 2022-07-09 22:17:26 -07:00
Tod Kurt
22e061ba35
Update ports/espressif/common-hal/wifi/Radio.c 
Co-authored-by: Dan Halbert <halbert@halwitz.org>
 2022-07-09 22:17:18 -07:00
Tod Kurt
98692150ac
Update ports/espressif/common-hal/wifi/Radio.c 
Co-authored-by: Dan Halbert <halbert@halwitz.org>
 2022-07-09 22:17:12 -07:00
Tod Kurt
f464ec3047
Update ports/espressif/common-hal/wifi/Radio.c 
Co-authored-by: Dan Halbert <halbert@halwitz.org>
 2022-07-09 22:17:02 -07:00
Dan Halbert
2c7ad7a39f make translate and pre-commit formatting fixes 2022-07-08 16:53:53 -04:00
Dan Halbert
c316b950c7 merge from adafruit/main 2022-07-08 15:42:19 -04:00
Dan Halbert
76e32dcf93 remove need for CIRCUITPY_ESP_PSRAM 2022-07-08 14:54:55 -04:00
Tod Kurt
d3e1d1b104 Fix #6559 2022-07-07 19:42:11 -07:00
Dan Halbert
4e88d795e1 Thonny causing crash emitglue.c:199: 2022-07-06 23:01:19 -04:00
Scott Shawcroft
07b2697ae3
WIP websocket to serial 2022-07-01 16:57:10 -07:00
Dan Halbert
8814ee03f1
Merge pull request #6542 from todbot/wifi-tx-power 
Add wifi.radio.tx_power
 2022-07-01 14:09:08 -04:00
Scott Shawcroft
7589e53fea
WIP websocket accept and hashlib 2022-07-01 10:18:33 -07:00
Dan Halbert
8bb369cac5 refactor debug UART to console UART; get working on ESP32 2022-06-30 23:16:46 -04:00
Tod Kurt
698d563dcf adust wifi.radio.tx_power to be x4 (in db) as mentioned in #6540 2022-06-30 15:33:03 -07:00
Tod Kurt
2a563cc8ba first cut at wifi.radio.tx_power 2022-06-30 15:10:16 -07:00
Dan Halbert
b0efd130c9 ESP32 REPL working through debug UART 2022-06-29 23:19:36 -04:00
Scott Shawcroft
3be3e89d82
Merge branch 'main' into cp_webserver 2022-06-29 14:01:32 -07:00
Scott Shawcroft
8dc8265275
Fix auto-wifi created crash 
The wifi event_handler runs on the other core so we need to be
careful when calling into CP APIs.

Fixes #6503
 2022-06-29 11:53:10 -07:00
Dan Halbert
780c4963cb wip; change never-ever reset pin mechanism 2022-06-28 23:06:49 -04:00
Dan Halbert
ca64950503 wip fixes 2022-06-28 18:32:08 -04:00
Scott Shawcroft
41039445c9
Clean up and add docs 2022-06-27 13:39:09 -07:00
Scott Shawcroft
3cd05291d0
Static files + welcome page 2022-06-27 13:39:09 -07:00
Scott Shawcroft
7543dd9af0
CORS works and autoreload too 2022-06-27 13:39:08 -07:00
Scott Shawcroft
92593aa7a1
Fix bind, remove hard coded ip 2022-06-27 13:34:13 -07:00
Scott Shawcroft
4f0a7aedfd
WIP adding devices.json and auth 2022-06-27 13:34:13 -07:00
Scott Shawcroft
32478345f8
more tweaks 2022-06-27 13:34:13 -07:00
Scott Shawcroft
0882cbf823
web server kinda works 2022-06-27 13:34:13 -07:00
Scott Shawcroft
61d0f7947b
WIP doesn't flush response before closing 2022-06-27 13:34:13 -07:00
Scott Shawcroft
301f3e0456
Start of web server 2022-06-27 13:34:13 -07:00
Dan Halbert
55784c93de wip; compiles 2022-06-26 21:22:22 -04:00
Scott Shawcroft
0c418e98b1
Merge remote-tracking branch 'adafruit/main' into auto_wifi 2022-06-13 15:44:43 -07:00
Scott Shawcroft
dc794f91c0
Speed up auto-wifi with wrong password 
This adds basic timeout support to connect by preventing subsequent
retries if over time. The first connect may still take more than
the timeout.
 2022-06-13 15:38:19 -07:00
Scott Shawcroft
b191075ab8
Better length checks 2022-06-13 09:18:42 -07:00
Scott Shawcroft
39b8c2c94e
Merge pull request #6453 from KurtE/ESP32_UART 
ESP32 USE uart_param_config
 2022-06-13 08:56:32 -07:00
Scott Shawcroft
6446010753
Wi-Fi autoconnect and title bar status 
This adds support for CIRCUITPY_WIFI_SSID and CIRCUITPY_WIFI_PASSWORD
in `/.env`. When both are defined, CircuitPython will attempt to
connect to the network even when user code isn't running. If the
user code attempts to a network with the same SSID, it will return
immediately. Connecting to another SSID will disconnect from the
auto-connected network. If the user code initiates the connection,
then it will be shutdown after user code exits. (Should match <8
behavior.)

This PR also reworks the default displayio terminal. It now supports
a title bar TileGrid in addition to the (newly renamed) scroll area.
The default title bar is the top row of the display and is positioned
to the right of the Blinka logo when it is enabled. The scroll area
is now below the Blinka logo.

The Wi-Fi auto-connect code now uses the title bar to show its
state including the IP address when connected. It does this through
the "standard" OSC control sequence `ESC ] 0 ; <s> ESC \` where <s>
is the title bar string. This is commonly supported by terminals
so it should work over USB and UART as well.

Related to #6174
 2022-06-09 14:55:54 -07:00
Scott Shawcroft
2baf476530
Merge pull request #6463 from adafruit/7.3.x 
Catch main up to 7.3.x
 2022-06-06 11:58:05 -07:00
Scott Shawcroft
be67067809
Merge remote-tracking branch 'adafruit/main' into translate_header 2022-06-03 15:18:18 -07:00
gamblor21
40e890323b Add DNS optional to set IP 2022-06-01 20:13:51 -05:00
KurtE
14ab3c7375 ESP32 USE uart_param_config 
Use this function instead of several individual configuration functions
to configure such things as Baud rate, transfer size, stop bits,
parity...

This function also resets both the RX and TX Hardware Fifo
reset functions are called to setup the hardware.
 2022-06-01 17:09:44 -07:00
gamblor21
4f6d4e2284 Doc fix and add set for DNS 2022-05-31 22:13:18 -05:00
gamblor21
90fe20a153 Adding manual IP address set 2022-05-27 15:33:54 -05:00
Scott Shawcroft
9d10a3da66
Conditionalize LTO 2022-05-27 12:59:54 -07:00
Dan Halbert
b143314b22 Espressif: fix allocation of multiple Incremental Encoders 2022-05-24 22:37:24 -04:00
Dan Halbert
f63b26c534 address jepler's comments and further squeezes 2022-05-20 10:10:55 -04:00
Dan Halbert
a01dec1df9 message consolidation and more use of validators 2022-05-19 15:38:37 -04:00
Scott Shawcroft
3e85cfe26b
Fix ESP and HCI build 2022-05-12 15:23:26 -07:00
Scott Shawcroft
269d51d023
Add two stage reset for BLE 
This lets the BLE stack run through the wait period after a VM run
when it may be waiting for more writes due to an auto-reload.

User BLE functionality will have their events stopped. Scanning and
advertising is also stopped.
 2022-05-12 13:20:44 -07:00
Dan Halbert
0f3eb9f46e espressif: check properly for pull values 2022-05-04 22:51:27 -04:00
Michael Wisslead
e63a327107 Bound PulseIn start indexes to maxlen. 2022-04-28 02:28:34 +00:00
Dan Halbert
4eeaf41edc test and adjust NeoPixel timings on multiple products 2022-04-25 23:12:24 -04:00
Dan Halbert
d5deddcaf5
Merge pull request #6207 from domdfcoding/esp32-rotaryio 
Add espressif rotaryio divisor support.
 2022-04-06 21:35:02 -04:00
Dominic Davis-Foster
f297e872d6
Account for divisor when overriding position. 2022-04-06 18:13:59 +01:00
Dan Halbert
99dc4029dc Espressif: disable pull-up on AnalogIn creation 2022-04-06 11:33:56 -04:00
Dominic Davis-Foster
319ca8560c
Always configure the second PCNT channel. 2022-03-31 20:00:34 +01:00
Dan Halbert
ec5c9507b9
Merge pull request #6187 from prplz/espressif-uart-workflow-fixes 
Espressif: Fix interrupts in UART workflow
 2022-03-30 21:18:02 -04:00
Dominic Davis-Foster
6d025a239e
Add espressif rotaryio divisor support. 2022-03-28 09:04:02 +01:00
Michael Himing
f96cd7361d Fix esp32s2 build 2022-03-27 10:09:23 +11:00
Jeff Epler
35aa32bec0
Merge pull request #6193 from tannewt/fix_empty_mdns 
Fix MDNS crash on S2
 2022-03-26 15:05:17 -05:00
Michael Himing
686012426d Espressif: Fix interrupts in UART workflow 2022-03-25 16:20:04 +11:00
Scott Shawcroft
8642dc4aa7
Fix MDNS crash on S2 
Fixes #6186
 2022-03-23 17:17:48 -07:00
Scott Shawcroft
380a7087d4
Fix 3-wire SPI on ESP 
Simplifying the checks fixed it.

Fixes #6141
 2022-03-23 14:53:46 -07:00
Scott Shawcroft
6dd9db31b3
Add USB to Serial/JTAG support for REPL 
Adds Adafruit QT Py C3 board that uses it. Also revamps size
check script to work for S3 and C3 as well.

Fixes #6030
 2022-03-21 14:03:57 -07:00
Scott Shawcroft
92d946fcac
Guard against NULL result 2022-03-21 10:15:46 -07:00
Scott Shawcroft
6f0d62d85e
Formatting and shrink build size on C3 2022-03-18 12:05:54 -07:00
Jeff Epler
e9d81c2826
Add mdns module 
This allows for CircuitPython to resolve a .local domain and find
other devices with MDNS services.

First step for #6174
 2022-03-17 18:16:16 -07:00
Scott Shawcroft
96dd11a198
Update ESP-IDF to fix PinAlarm 
Fixes #5973
 2022-03-11 14:40:49 -08:00
Dan Halbert
1c8f671f0a
Merge pull request #6118 from pewpew-game/parallel-reset-optional 
paralleldisplay: reset and read pins should be optional
 2022-03-08 09:34:25 -05:00
Michael Himing
bc1dade304 Espressif: Fix i2c pullup detection 2022-03-08 16:39:24 +11:00
Radomir Dopieralski
b5ad78715c
Update ports/espressif/common-hal/paralleldisplay/ParallelBus.h 
Co-authored-by: Dan Halbert <halbert@halwitz.org>
 2022-03-05 21:48:00 +01:00
Radomir Dopieralski
f477848ac1 paralleldisplay: reset and read pins should be optional 
The ``reset`` and ``read`` pins should be optional, but the espressif
code had several places where it assumed they are not, and a bug that
caused a crash on ``release_displays`` if they were made optional.

The bug was caused by the fields for storing pin numbers being set
to ``NO_PIN``, which has value of -1, while the fields have type
``uint8_t``.  That set the actual value to 255, and a subsequent
comparison to ``NO_PIN`` returned false.
 2022-03-05 18:54:12 +01:00
Scott Shawcroft
c4fb5f7df1
Allow ESP boards to customize how a pin is reset 
This allows board code to override the default pull up reset state.

It is useful for pins that are already externally connected, pulled
or otherwise used by the board.

Fixes #5931
 2022-02-17 16:32:29 -08:00
Dan Halbert
fe6e03f504
Merge pull request #6013 from tannewt/esp_ble_gatt_client 
Add S3 GATT client support
 2022-02-17 16:02:11 -05:00
Scott Shawcroft
65af10cd23
Tweak I2C and TFT power pin defaults 
This should set the power to on by default without preventing the
user code from repeatedly using it.

Fixes #5903
 2022-02-14 16:19:56 -08:00
anecdata
5742a12497 input validation consistent with esp-idf is moved to common-hal 2022-02-13 22:14:45 -06:00
anecdata
b559a0ee2a new kwarg: wifi.radio.start_ap(max_connections=) 2022-02-12 13:34:57 -06:00
Scott Shawcroft
8958e7ef08
Add S3 GATT client support 
This allows you to connect to GATT services on the other device.
It also adds connection initiation (GAP central).

More progress on #5926
 2022-02-10 11:31:57 -08:00
Scott Shawcroft
c9b494b79f
Merge pull request #6006 from DavePutz/issue_5980 
Correct ping timeout for espressif
 2022-02-10 10:18:14 -08:00
root
6563f71545 Correct ping timeout for espressif 2022-02-09 15:58:25 -06:00
Scott Gauche
a8d8651873 Canonical C style for half_duplex = true/false 2022-02-08 23:13:22 -05:00
Scott Gauche
89ad767b8f add half_duplex to spi constructs in other ports but raise not implemented errors 2022-02-08 22:25:23 -05:00
Scott Shawcroft
2964e966b1
Merge pull request #5958 from dhalbert/i2c-common-hal-write-read 
I2c common hal write read
 2022-02-01 11:08:50 -08:00
Dan Halbert
cc410ad6a3 common-hal I2C combined write_read 2022-01-31 22:03:30 -05:00
Scott Shawcroft
db7e72b43d
Fix BLE scanning forever on ESP32-S3 2022-01-31 15:45:43 -08:00
Dan Halbert
83e6e6690a wip; works on espressif 2022-01-29 22:44:27 -05:00
Scott Shawcroft
019aecaa20
Support BLE advertising on ESP 
Services and characteristics still won't work.

Progress on #5926
 2022-01-27 17:40:37 -08:00