Commit Graph

1346 Commits

Author SHA1 Message Date
Damien George d27e58449b stm32/mboot: Remove redundant code in mboot_state_change function.
This code was made redundant in 87fbceef26

Signed-off-by: Damien George <damien@micropython.org>
2022-07-05 23:47:54 +10:00
Jim Mussared 6519b1b95e stm32/Makefile: Fix setting of define that enables WIZNET5K driver.
Commit 9670a156da missed one renaming of
MICROPY_PY_WIZNET5K to MICROPY_PY_NETWORK_WIZNET5K which prevented the
Wiznet interface from being enabled.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-07-02 00:21:36 +10:00
Angus Gratton dd77dbd4f7 stm32/boards: Enable LTO by default on boards with smaller flash size.
Signed-off-by: Angus Gratton <gus@projectgus.com>
2022-06-28 10:32:39 +10:00
Angus Gratton e76d88b531 stm32/Makefile: Enable link-time-optimisation via LTO=1 make option.
When tested, this reduces default MP binary sizes by approx 2-2.5%, and
very marginally increases performance in benchmarks. Build times seem very
similar to non-LTO when using gcc 12.

See #8733 for further discussion.

Signed-off-by: Angus Gratton <gus@projectgus.com>
2022-06-28 10:31:32 +10:00
Angus Gratton 2c015375d1 stm32: Use a separate symbol name for the bootloader state pointer.
Prerequisite for enabling Link Time Optimisation.

The _bl_state address is the same as _estack, but _estack is referred to as
a uint32_t elsewhere in the code. LTO doesn't like it when the same symbol
has two different types.

Signed-off-by: Angus Gratton <gus@projectgus.com>
2022-06-28 10:25:08 +10:00
Koen De Vleeschauwer 432b65f178 stm32/usb: Expose USB HID device instance via usbd_hid_get().
This is needed to implement a HID device in user C modules.
2022-06-24 18:33:26 +10:00
iabdalkader 6c1495b5fe stm32/usbd_cdc_interface: Add support for Arduino 1200bps touch.
If the serial port is closed with baudrate at 1200 then the board will
enter its bootloader.
2022-06-23 14:30:07 +10:00
David Lechner c118b5d0e4 extmod/extmod.mk: Separate out extmod file list from py.mk to extmod.mk.
This separates extmod source files from `py.mk`.  Previously, `py.mk`
assumed that every consumer of the py/ directory also wanted to include
extmod/.  However, this is not the case.  For example, building mpy-cross
uses py/ but doesn't need extmod/.

This commit moves all extmod-specific items from `py.mk` to `extmod.mk` and
explicitly includes `extmod.mk` in ports that use it.

Signed-off-by: David Lechner <david@pybricks.com>
2022-06-21 00:14:34 +10:00
Damien George 1842efbdd9 stm32/Makefile: Set CSUPEROPT to -Os for F0 and G0 MCUs to save space.
Saves 1804 bytes on NUCLEO_F091RC, and 1080 bytes on NUCLEO_G0B1RE.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-20 23:37:38 +10:00
chrismas9 868f23b362 stm32/boards/NUCLEO_F091RC: Enable LFS1 filesystem.
And disable some less common features to make space for it.

Signed-off-by: Chris Mason <c.mason@inchipdesign.com.au>
2022-06-17 21:27:41 +10:00
chrismas9 fdbca3c143 stm32/boards/stm32f091xc.ld: Allocate space for a small filesystem.
Signed-off-by: Chris Mason <c.mason@inchipdesign.com.au>
2022-06-17 21:27:32 +10:00
Damien George d8e7ecd231 stm32/modmachine: Factor out mboot enter code to a function.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-17 13:57:47 +10:00
iabdalkader 0adf0dd3d7 stm32/modmachine: Allow boards to provide custom bootloader code.
And expose the machine_bootloader() C function so it can be used elsewhere.
2022-06-17 13:36:55 +10:00
Damien George 096954337f stm32/mboot: Only include UI code if at least one board LED is defined.
Otherwise the board must provide dummy definitions of MBOOT_LED1.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-16 14:31:09 +10:00
Damien George 3452ee58d3 stm32/boards/LEGO_HUB_NO6: Add comment to readme about powering off.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-09 13:24:08 +10:00
Damien George 45a0c6da5b stm32/mboot: Remove MP_WEAK on led funcs and make some of them static.
Both led_init and led_state are configurable via MBOOT_BOARD_LED_INIT and
MBOOT_BOARD_LED_STATE respectively, so don't need to be MP_WEAK.

Furthermore, led_state and led0_state are private to ui.c so can be made
static.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-09 13:24:08 +10:00
Damien George bd5152c928 stm32/mboot: Add board-configurable SysTick hook.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-09 13:24:08 +10:00
Clayton Mills 767f2ce9a7 stm32/usbd_conf: Remove disable of SYSCFG clock.
System config block contains hardware unrelated to USB.  So calling
`__SYSCFG_CLK_DISABLE()` during `HAL_PCD_MspDeInit()` has an adverse effect
on other system functionality.

Removing call to `__SYSCFG_CLK_DISABLE()` to rectify this issue.

This call was there since the beginning of the USB CDC code, added in
b30c02afa0.
2022-06-07 18:09:58 +10:00
Clayton Mills 0d8d911950 stm32/powerctrl: Disable sys tick interrupt in stop mode on some STM32s.
According to ST Errata ES0206 Rev 18, Section 2.2.1, on STM32F427x,
STM32F437x, STM32F429x and STM32F439x.

If the system tick interrupt is enabled during stop mode while certain
bits are set in the DBGMCU_CR, then the system will immediately wake
from stop mode.

Suggested workaround is to disable system tick timer interrupt when
entering stop mode.

According to ST Errate ES0394 Rev 11, Section 2.2.17, on STM32WB55Cx and
STM32WB35Cx.

If the system tick interrupt is enabled during stop 0, stop 1 or stop 2
while certain bits are set in DBGMCU_CR, then system will immediately
wake from stop mode but the system remains in low power state. The CPU
therefore fetches incorrect data from inactive Flash, which can cause a
hard fault.

Suggested workaround is to disable system tick timer interrupt when
entering stop mode.
2022-06-07 18:08:02 +10:00
Damien George 14105ff5b1 stm32/machine_i2c: Enable timingr constructor keyword on H7 MCUs.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-07 17:05:05 +10:00
Damien George a0dae1dda2 stm32/flash: Remove FLASH_OPTR_DBANK condition in L4, H7 get_bank func.
This was added by mistake in 8f68e26f79 when
adding support for G4 MCUs, which does not using this get_bank() function.

FLASH_OPTR_DBANK is only defined on G4 and L4 MCUs, so on H7 this
FLASH_BANK_2 code was being wrongly excluded.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-07 16:55:18 +10:00
Damien George 9670a156da all: Rename MICROPY_PY_WIZNET5K to MICROPY_PY_NETWORK_WIZNET5K.
To match MICROPY_PY_NETWORK_CYW43 and MICROPY_PY_NETWORK_NINAW10.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-07 16:55:18 +10:00
Andrew Leech 8fb01be6cf stm32/rfcore: Remove extra layer of buffering on BLE IPCC.
Whole packets are now pushed up to the higher layer of the BLE stack,
instead of buffering the packets so individual bytes can be requested.
2022-06-03 11:58:43 +10:00
Damien George efe23aca71 all: Remove third argument to MP_REGISTER_MODULE.
It's no longer needed because this macro is now processed after
preprocessing the source code via cpp (in the qstr extraction stage), which
means unused MP_REGISTER_MODULE's are filtered out by the preprocessor.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 16:31:37 +10:00
Damien George 340872cfdd stm32/boards/LEGO_HUB_NO6: Add helper scripts to update app firmware.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 15:22:16 +10:00
Damien George 87ca431f3f stm32/boards/LEGO_HUB_NO6: Implement robust filesystem-load updates.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 14:30:51 +10:00
Damien George d84ebc31f7 stm32/boards/LEGO_HUB_NO6: Use multi-colour LED for mboot status.
This gives more information to the user when doing updates from SPI flash.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 14:30:51 +10:00
Damien George fae9205594 stm32/boards/LEGO_HUB_NO6: Add support for mboot to access SPI flash.
The following changes are made:
- Use software SPI for external SPI flash access when building mboot.
- Enable the mboot filesystem-loading feature, with FAT FS support.
- Increase the frequency of the CPU when in mboot to 96MHz, to increase the
  speed of SPI flash accesses and programming.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 14:30:51 +10:00
Damien George 36211baf0e stm32/boards/LEGO_HUB_NO6: Make all SPI flash transfers use 32-bit addr.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 14:30:51 +10:00
Damien George 87fbceef26 stm32/mboot: Pass initial_r0 to early-init and get-reset-mode funcs.
This allows a board to modify initial_r0 if needed.

Also make default board behaviour functions always available, named as
mboot_get_reset_mode_default and mboot_state_change_default.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 14:30:51 +10:00
Damien George e64947dc90 stm32/mboot: Make 0x70ad0000 values named constants with macros.
Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 14:30:51 +10:00
Damien George 9246099935 stm32/mboot: Add update_app_elements to return mboot fsload elements.
In case the elements should not be passed directly to machine.bootloader.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 14:30:51 +10:00
Damien George 1296a01f4c stm32/mboot: Move remaining led_state_all call into mboot_state_change.
This was missed in b2deea6762

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 14:30:51 +10:00
Damien George 54f1694ab6 drivers/bus: Rename MP_SPI_ADDR_IS_32B to MICROPY_HW_SPI_ADDR_IS_32BIT.
And allow it to be configured externally, if needed.

Signed-off-by: Damien George <damien@micropython.org>
2022-06-02 14:30:51 +10:00
Damien George 6e71cde6aa ports: Use default VFS config for import_stat and builtin_open.
For ports with MICROPY_VFS and MICROPY_PY_IO enabled their configuration
can now be simplified to use the defaults for mp_import_stat and
mp_builtin_open.

This commit makes no functional change, except for the following minor
points:
- the built-in "open" is removed from the minimal port (it previously did
  nothing)
- the duplicate built-in "input" is removed from the esp32 port
- qemu-arm now delegates to VFS import/open

Signed-off-by: Damien George <damien@micropython.org>
2022-05-25 13:04:45 +10:00
Damien George 26b1d31eda Revert "stm32/rfcore: Intercept addr-resolution HCI cmd to work arou..."
This reverts commit 2668337f36.

The issue with potential breaking of the BLE RX path in the radio is fixed
since WS v1.12.0.

Signed-off-by: Damien George <damien@micropython.org>
2022-05-25 11:02:35 +10:00
Jim Mussared 0a92469c10 stm32: Make port-specific modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:56:30 +10:00
Jim Mussared bb794f05b7 extmod: Make port-included extmod modules use MP_REGISTER_MODULES.
_onewire, socket, and network were previously added by the port rather
than objmodule.c.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:49:12 +10:00
Jim Mussared 4eab44a1ec extmod: Make extmod modules use MP_REGISTER_MODULE.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-18 20:49:12 +10:00
Damien George 5b700b0af9 all: Reformat remaining C code that doesn't have a space after a comma.
Signed-off-by: Damien George <damien@micropython.org>
2022-05-05 13:30:40 +10:00
Damien George b0a1b60a9b extmod: Move font_petme128_8x8.h from ports/stm32 to extmod.
And add spaces after commas so it is consistently formatted.

Signed-off-by: Damien George <damien@micropython.org>
2022-05-05 13:30:40 +10:00
Damien George 39c96b543f stm32/mbedtls: Use core-provided tracked alloc instead of custom funcs.
Signed-off-by: Damien George <damien@micropython.org>
2022-05-05 10:31:50 +10:00
Jim Mussared 0e7bfc88c6 all: Use mp_obj_malloc everywhere it's applicable.
This replaces occurences of

    foo_t *foo = m_new_obj(foo_t);
    foo->base.type = &foo_type;

with

    foo_t *foo = mp_obj_malloc(foo_t, &foo_type);

Excludes any places where base is a sub-field or when new0/memset is used.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2022-05-03 22:28:14 +10:00
Asensio Lorenzo Sempere 9d08eb0247 stm32/boards/NUCLEO_G0B1RE: Add NUCLEO_G0B1RE board definition.
This commit adds a board definition for NUCLEO_G0B1RE. This board has the
REPL on UART2 which is connected to the on-board ST-link USB-UART.

Signed-off-by: Asensio Lorenzo Sempere <asensio.aerospace@gmail.com>
2022-04-28 11:56:15 +10:00
Asensio Lorenzo Sempere 010012c7c3 stm32: Add support for G0 MCUs.
This commit adds support for the STM32G0 series of MCUs.

Signed-off-by: Asensio Lorenzo Sempere <asensio.aerospace@gmail.com>
2022-04-28 11:56:15 +10:00
Asensio Lorenzo Sempere 3587d8e808 stm32/storage: Add support for internal storage on Cortex-M0 MCUs.
This implements self-triggering of the Flash NVIC interrupt on Cortex-M0
devices, which allows enabling internal storage on those MCUs.

Signed-off-by: Asensio Lorenzo Sempere <asensio.aerospace@gmail.com>
2022-04-28 11:56:15 +10:00
iabdalkader 96ad86ed2b stm32/boards/ARDUINO_PORTENTA_H7: Add support for Arduino Portenta H7. 2022-04-28 10:42:47 +10:00
iabdalkader 1f33ec140a stm32/ulpi: Include missing py/mperrno.h header. 2022-04-28 10:34:56 +10:00
iabdalkader 014912daae stm32/ulpi: Add USB3320 ULPI low-power functions.
This driver allows switching USB3320 ULPI to low-power mode.  It is ported/
adapted from ST code, stm32f7xx_lp_modes.c, which is BSD-3 licensed code.
2022-04-26 23:11:50 +10:00
iabdalkader 32914c53ef stm32/qspi: Workaround for SR set immediately after setting AR.
See issue #5441.  This issue is now reproducible on the Arduino Portenta
H747, QSPI flash PN MX25L12833F.
2022-04-26 22:33:05 +10:00
iabdalkader 5974ac256b stm32/qspi: Wait for a free FIFO location before writing to DR.
Must always check the FIFO before writing to DR.  Without this, this
function hangs on the H747.
2022-04-26 22:32:48 +10:00
iabdalkader b28839420d stm32/qspi: Support common flash sizes in MPU configuration.
Add MPU configuration for common flash sizes up to 256MiB.
2022-04-26 22:32:29 +10:00
Damien George 5c32111fa0 ports: Reformat more C and Python source code.
These files that are reformatted only now fall under the list of files to
apply uncrustify/black formatting to.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-20 16:17:35 +10:00
Damien George 707aaa350a stm32/boards/LEGO_HUB_NO6: Exclude BTstack code from formatting.
Signed-off-by: Damien George <damien@micropython.org>
2022-04-20 15:54:26 +10:00
iabdalkader 03c61916bc stm32/boards/ADAFRUIT_F405_EXPRESS: Use external SPI flash for storage.
Fixes issue #8553.
2022-04-20 15:37:14 +10:00
iabdalkader 71afed1a70 stm32/mphalport: Fix I/O glitches when switching GPIO mode to alt-func.
To avoid any I/O glitches in mp_hal_pin_config, make sure a valid alternate
function is set in AFR first before switching the pin mode.  When switching
from AF to INPUT or OUTPUT, the AF in AFR will remain valid up until the
pin mode is switched.
2022-04-20 15:31:14 +10:00
Chris Wilson b50fe9a6da stm32/boards/SPARKFUN_MICROMOD_STM32: Fix incorrect UART and I2C config.
Based on testing with real hardware.
2022-04-19 10:42:37 +10:00
Damien George 8045ac07f5 stm32/mpbthciport: Switch scheduling callback to use node scheduler.
Signed-off-by: Damien George <damien@micropython.org>
2022-04-14 12:33:31 +10:00
Dave Hylands 9d7c168bf5 stm32/boards/PYBD_SFx: Allow FROZEN_MANIFEST to be overridden.
Because mpconfigboard.mk used = rather then ?= it doesn't allow
FROZEN_MANIFEST to be overridden using a GNUmakefile or the manifest.
2022-04-11 16:19:45 +10:00
iabdalkader a82fad7d8e stm32/system_stm32: Improve H7 PLL and OSC configuration.
- Allow boards to configure CSI, HSI48 and PLL2.
- Allow peripheral clock source configuration.
- Set H7 SYSCLKSource.
2022-04-11 16:12:53 +10:00
iabdalkader 36cac5e154 stm32/system_stm32: Allow boards to configure PLL VCI, VCO and FRACN.
This removes hard-coded PLL1/3 VCI, VCO and FRACN.
2022-04-11 16:12:53 +10:00
iabdalkader a3e5a68c46 stm32/system_stm32: Set voltage scaling level 0 for H7 Rev-V devices.
This enables voltage scaling level 0 for H7 Rev-V devices, which allows the
CPU to run at the maximum supported operating frequency (480MHz).
2022-04-11 16:12:53 +10:00
iabdalkader bdbc9b395f stm32/system_stm32: Add H7 switched-mode-power-supply support.
- Add board-level configuration option to set the SMPS supply mode.
- Wait for valid voltage levels after configuring the SMPS mode.
- Wait for external supply ready flag if SMPS supplies external circuitry.
2022-04-11 16:12:53 +10:00
iabdalkader 7b3adb5ce5 stm32/Makefile: Add H747 to Makefile's MCU flags. 2022-04-11 16:12:50 +10:00
iabdalkader 2a19c3cfe1 stm32/sdram: Add function to enable SDRAM power-down mode.
Add power-down mode for maximum power saving while in standby mode, to be
used by a board if needed.  Also fix a typo in a comment.
2022-04-11 16:00:40 +10:00
Damien George cb0372b5bf stm32/mboot: Add macros for use in led_state_all().
Signed-off-by: Damien George <damien@micropython.org>
2022-04-11 15:52:41 +10:00
Damien George b2deea6762 stm32/mboot: Consolidate all UI and add general state change hooks.
All user interface (LED, button) code has been moved to ui.c, and the
interface to this code with the rest of the system now goes through calls
to mboot_state_change().  This state-change function can be overridden by a
board to fully customise the user interface behaviour.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-11 15:52:41 +10:00
Damien George 66b5c4c770 stm32/machine_bitstream: Include all clobbered regs in Cortex-M0 impl.
These additional registers are used by the assembly code.

Thanks to Jim Mussared for the fix.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-07 21:17:51 +10:00
Damien George 43d50f006d stm32/mpconfigport.h: Let MICROPY_PY_IO_FILEIO take its default value.
This is enabled at MICROPY_CONFIG_ROM_LEVEL_EXTRA_FEATURES, which is the
default for stm32.  Not setting the value in mpconfigboard.h allows boards
to optionally configure it.

Signed-off-by: Damien George <damien@micropython.org>
2022-04-07 13:25:48 +10:00
Andrew Leech 8db93dc016 stm32/Makefile: Allow overriding COPT in Makefile.
It can now be set in mpconfigboard.mk (as well as the make command line).
2022-04-04 23:12:15 +10:00
iabdalkader 5562ed3f43 stm32/pyb_can: Replace CAN.initfilterbanks with CAN.init keyword arg.
The CAN.initfilterbanks() class method is removed, and its functionality is
replaced with the "num_filter_banks" keyword argument to the CAN
constructor and CAN.init().  This configures the filter bank split.

This new approach provides more flexibility configuring the resources used
by a given CAN instance, allowing other MCUs like H7 to fit the API.  It
also brings CAN closer to how other machine peripherals are configured,
where everything is done in the constructor/init method.

This is a breaking change to the CAN API.
2022-04-02 22:42:00 +11:00
iabdalkader a79706fb39 stm32/pyb_can: Define the maximum bit timing parameters.
Define the maximum parameters for CAN/FDCAN nominal bit timing, and for
FDCAN data bit timing, for bit timing calculations.
2022-04-02 22:41:37 +11:00
iabdalkader 95104c9f6e stm32/pyb_can: Return the filter ID and type of received messages.
CAN.recv() now returns a 5-tuple, with the new element in the second
position being a boolean, True if the ID is extended.

This is a breaking change of the API for CAN.recv().
2022-04-02 22:40:09 +11:00
iabdalkader e7264e9532 stm32/pyb_can: Add support for bus with mixed Classic/FD nodes.
A CAN bus can have mixed classic/FD nodes.  Prior to this patch the CAN API
could be configured for either standard or extended ID, but not both/mixed
operation.

This patch allows extended IDs to be filtered and enabled on a per-message
basis, in send(), setfilter() and clearfilter().

This is a breaking change to the API: init() no longer accepts the extframe
keyword argument.
2022-04-02 22:37:52 +11:00
iabdalkader 3320ec44ed stm32/pyb_can: Add support for CAN FD extended frame ID. 2022-04-02 22:37:45 +11:00
iabdalkader ff287d085f stm32/pyb_can: Enable CAN FD frame support and BRS.
- Enable CAN FD frame support and BRS.
- Optimize the message RAM usage per FDCAN instance.
- Document the usage and different sections of the Message RAM.
2022-04-02 22:37:27 +11:00
Andrew Leech a41bc5a7ca stm32/modmachine: Add deepsleep support to reset_cause() for WB55. 2022-03-30 15:56:26 +11:00
Meriç SARIIŞIK 6b23f7d301 stm32/sdio: Use runtime calculation for clock divider of sdio on H7.
STM32H7 family has a different calculation compared to the current one for
the SDMMC clock divider configuration.
2022-03-30 15:40:59 +11:00
Damien George 6804a8a891 stm32/machine_i2s: Fix 16-bit stereo i2s_frame_map.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-29 11:44:08 +11:00
Damien George 2a91c8a888 stm32/machine_i2s: Allow I2S.deinit to be called multiple times.
In particular, it is called by the constructor if the instance already
exists.  So if the previous instance was deinit'd then it will be deinit'd
a second time.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-29 11:44:08 +11:00
Damien George c90dfba04c stm32/machine_i2s: Set FullDuplexMode to disabled on F4.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-29 11:44:08 +11:00
iabdalkader fe8b47e29f ports: Allow boards to define additional network interfaces. 2022-03-24 17:23:28 +11:00
Damien George 66fe3d5cb5 stm32: Support building for STM32F745.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-22 16:01:09 +11:00
Andrew Leech bb0ca00b77 stm32/mboot: Verify CRC32 of fsload DFU files before writing. 2022-03-22 15:04:41 +11:00
Andrew Leech bc856a1e29 stm32/mboot: Verify signature of fsload packed DFU files before writing.
When verifying the DFU contents, the signature of signed/encrypted files is
also now checked in this initial, dry-run stage.
2022-03-22 15:04:37 +11:00
Damien George 80055c2cdc stm32/mboot/fwupdate.py: Simplify calculation of CRC32.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-22 14:14:31 +11:00
Damien George bf89e336b9 stm32/boards/PYBD_SF2: Turn on SD card in mboot init if SD enabled.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-22 13:33:43 +11:00
Damien George e316306546 stm32/mboot: Add support for reading from SD card.
Tested on PYBV10 and PYBD_SF6, with MBOOT_FSLOAD enabled and programming
new firmware from a .dfu.gz file stored on the SD card.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-22 13:33:43 +11:00
Damien George 9b07d38c7e stm32/mboot: Add support for 64-bit mboot address space for reads.
If enabled via MBOOT_ADDRESS_SPACE_64BIT (it's disabled by default) then
read addresses will be 64-bit.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-22 13:33:43 +11:00
Damien George a92d45c3df stm32/mboot: Always check the magic number to enter filesystem loading.
Even if MBOOT_FSLOAD is disabled, mboot should still check for 0x70ad0080
so it can immediately return to the application if this feature is not
enabled.  Otherwise mboot will get stuck in DFU mode.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-22 12:49:00 +11:00
Damien George dc91024a73 stm32/mboot: Add pragma for GCC to ignore array bounds warning.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-22 12:44:10 +11:00
Damien George f0be0de341 stm32/dma: Add option to disable auto-DMA-turn-off.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-22 12:43:53 +11:00
Damien George 63c7593df6 stm32/main: Support SD cards without a partition table.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-22 12:41:15 +11:00
Damien George 75d2bfcccf stm32/sdcard: Add sdcard_select_sd/mmc functions.
So that C code can select which of SD or MMC to use.

Signed-off-by: Damien George <damien@micropython.org>
2022-03-22 12:38:45 +11:00
Damien George 7a9cf1f0fb stm32/sdcard: Use mp_hal_pin_input instead of HAL function.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-22 12:15:36 +11:00
Peter Züger 95ee29f4f4 stm32/mbedtls: Add NULL pointer check in m_free_mbedtls.
According to the C standard the free(void *ptr) function: if ptr is a null
pointer, no action occurs.

Signed-off-by: Peter Züger <zueger.peter@icloud.com>
2022-03-17 13:11:22 +11:00
iabdalkader a16dcc8136 stm32/boards: Convert F4xx and F7xx to new flash FS config.
Following on from 35e70c1698.

Fixes issue #8390.
2022-03-17 13:06:45 +11:00
Damien George 11b77263ef stm32/moduos: Convert module to use extmod version.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-09 10:03:23 +11:00
Damien George 94077c6402 samd/moduos: Convert module to use extmod version.
Signed-off-by: Damien George <damien@micropython.org>
2022-03-09 10:03:23 +11:00
Damien George 5995fb5261 stm32/mboot: Allow a board more control over entry initialisation.
If MBOOT_BOARD_ENTRY_INIT is defined by a board then that function must now
make sure system clocks are configured, eg by calling mboot_entry_init().

Signed-off-by: Damien George <damien@micropython.org>
2022-02-18 14:59:35 +11:00