348392f8cc
Merge pull request #3775 from tannewt/nina_certs
...
Use nina-fw root certs
2020-12-02 16:13:19 -05:00
9b3186b625
Merge pull request #3776 from tannewt/backup_socket_timeout
...
Two minor socket changes
2020-12-02 16:12:29 -05:00
608c98501b
Merge remote-tracking branch 'adafruit/main' into msgpack
2020-12-02 13:10:39 -08:00
31acfedf93
Merge pull request #3780 from tannewt/block_while_erasing
...
Block all tasks (not interrupts) during flash erase
2020-12-02 16:10:25 -05:00
34bbcc4910
exclude nrf/simmel due to lack of flash
2020-12-02 13:05:00 -08:00
d7ba641ff6
Merge pull request #3767 from dhalbert/sleep
...
Initial alarm and sleep PR: time alarms with light and deep sleep; PinAlarms not yet implemented
2020-12-02 12:51:43 -08:00
cb863e4c5c
Added to partial builds where frozen removed
2020-12-01 22:19:48 -06:00
546b15bf1a
add trailing newline
2020-12-01 18:42:07 -08:00
87d4184dd5
exclude spresense
2020-12-01 18:42:06 -08:00
582a47d71a
rename read, write to read_bytes, write_bytes
2020-12-01 18:41:11 -08:00
59c3e25168
disable on boards tight on memory. add stddef.h to imports (not actually needed).
2020-12-01 18:39:24 -08:00
513253bc3f
moved logic to shared-module and added documentation
2020-12-01 18:38:14 -08:00
90c203a3dd
add module msgpack
2020-12-01 18:38:14 -08:00
73e22f9eeb
Block all tasks (not interrupts) during flash erase
...
Otherwise we risk running code from flash while an erase is in
progress, crashing and corrupting the file system.
Related to #3744
2020-12-01 18:15:06 -08:00
fe1c2fa6f0
Removed bus device from simmel build
2020-12-01 19:11:17 -06:00
8b7c23c1ee
address review comments
2020-12-01 20:01:14 -05:00
237385798c
Merge branch 'main' into bus_device
2020-12-01 15:47:16 -06:00
927624468d
Two minor socket changes
...
* Remove BrokenPipeError and prefer to return the number of bytes
received. (May be zero.)
* Add two minute backup timeout to reduce the chance we hang on
recv accidentally.
2020-11-30 18:39:50 -08:00
4ac4faaaf6
Use nina-fw root certs
...
That way we have one set we use for all of Adafruit's connected
devices.
2020-11-30 17:02:26 -08:00
5b3c930e38
Merge pull request #3738 from microDev1/fix-touch
...
ESP32S2: Fix multiple touchpad don't work simultaneously
2020-11-30 16:03:16 -08:00
a975ef4971
Merge pull request #3695 from cwalther/movable
...
Add movable supervisor allocations
2020-11-30 16:00:55 -08:00
98cf7f67d4
Merge pull request #3773 from dhalbert/no-samd21-complex-arithmetic
...
Disable complex arithmetic on SAMD21 builds to make space
2020-11-30 13:47:56 -08:00
dbfabddf58
rename ESP TX and RX pins; remove support
2020-11-30 11:11:04 -05:00
9768951a2a
Disable complex arithmetic on SAMD21 builds to make space
2020-11-29 15:34:38 -05:00
848eb28132
esp-uart-pins
2020-11-28 14:52:56 -05:00
c7404a3ff8
Add movable allocation system.
...
This allows calls to `allocate_memory()` while the VM is running, it will then allocate from the GC heap (unless there is a suitable hole among the supervisor allocations), and when the VM exits and the GC heap is freed, the allocation will be moved to the bottom of the former GC heap and transformed into a proper supervisor allocation. Existing movable allocations will also be moved to defragment the supervisor heap and ensure that the next VM run gets as much memory as possible for the GC heap.
By itself this breaks terminalio because it violates the assumption that supervisor_display_move_memory() still has access to an undisturbed heap to copy the tilegrid from. It will work in many cases, but if you're unlucky you will get garbled terminal contents after exiting from the vm run that created the display. This will be fixed in the following commit, which is separate to simplify review.
2020-11-28 17:50:23 +01:00
28d9e9186e
Disable complex arithmetic on SAMD21 builds to make space
2020-11-28 10:12:46 -05:00
596e0e4bd2
merge from upstream
2020-11-27 16:06:57 -05:00
e308a9ec11
working! PinAlarm not implemented yet.
2020-11-27 16:03:37 -05:00
104a089677
deep sleep working; deep sleep delay when connected
2020-11-26 22:06:37 -05:00
e90cb3ad86
Merge branch 'main' into fix-touch
2020-11-26 11:33:45 +05:30
6af48bb24c
reset touchin on every vm run
2020-11-26 11:22:44 +05:30
7923aa0a62
Merge pull request #3708 from hierophect/esp32s2-udp
...
ESP32-S2: Add UDP with recvfrom_into and sendto
2020-11-25 21:11:20 -06:00
6fd123a5c4
Merge pull request #3758 from tannewt/update_connect_doc
...
Update wifi.Radio.connect doc
2020-11-25 21:09:56 -06:00
abff2615cb
Merge pull request #3754 from hierophect/esp-spi-pinclaim
...
ESP32S2: fix pin claiming bugs
2020-11-25 15:11:29 -08:00
ef0830bfe2
merge from upstream + wip
2020-11-25 17:52:06 -05:00
9dbea36eac
changed alarm.time API
2020-11-25 15:09:27 -05:00
a854da35d3
Fix masking issue causing pin claim problems
2020-11-25 12:14:56 -05:00
c9bc877683
Merge remote-tracking branch 'upstream/main' into esp-spi-pinclaim
2020-11-25 10:43:35 -05:00
9a692c3222
Exit faster on recv when TLS connection closed
...
When a TLS connection is closed by the server it usually sends a
notice. We see this incoming byte with lwip_ioctl and try to read
it. The read returns 0 but we keep trying anyway. Now, we quit
trying when we get zero back. If the connection was still alive
it'd either read a byte or delay until a byte could be read.
2020-11-24 18:14:22 -08:00
4ac11c8d31
Update wifi.Radio.connect doc
...
Now it includes bssid info.
2020-11-24 17:54:39 -08:00
e778fc1f87
Merge pull request #3741 from hathach/fix-cdc-connection-race
...
update tinyusb to fix cdc connection race
2020-11-24 19:11:41 -06:00
510f464234
Merge branch 'main' into esp32s2-udp
2020-11-24 18:28:10 -05:00
8364734ba3
Merge pull request #3749 from skerr92/add-cpsapling-spiflash
...
Add cpsapling spiflash
2020-11-24 15:22:21 -08:00
c451b22255
Disable 3-arg pow() function on m0 boards
...
`pow(a, b, c)` can compute `(a ** b) % c` efficiently (in time and memory).
This can be useful for extremely specific applications, like implementing
the RSA cryptosystem. For typical uses of CircuitPython, this is not an
important feature. A survey of the bundle and learn system didn't find
any uses.
Disable it on M0 builds so that we can fit in needed upgrades to the USB
stack.
2020-11-24 16:54:33 -06:00
669f17e5bf
Merge pull request #3678 from microDev1/nvm-s2
...
ESP32S2: Support for NVM
2020-11-24 14:45:35 -08:00
59458a9013
Add pin claiming to SPI construct
2020-11-24 16:46:11 -05:00
d0e75e635a
Merge pull request #3714 from microDev1/ps2io-S2
...
ESP32S2: Support for PS/2-IO
2020-11-24 14:56:09 -05:00
0c5e0954db
Add closed socket identification
2020-11-24 14:51:06 -05:00
1031fe2992
correct submodule
2020-11-24 14:46:43 -05:00
0836abba41
Merge pull request #3720 from tannewt/more_wifi_retry
...
Retry connection when getting NOT_AUTHED
2020-11-24 09:54:54 -06:00
686edcef3f
fixing PID issues with CI Test (whoops)
2020-11-24 07:41:32 -05:00
f8499a468e
Remove filesystem from linker script.
2020-11-23 22:56:38 -08:00
bbe13490b5
Merge branch 'main' into nvm-s2
2020-11-24 12:24:48 +05:30
570353b946
Merge remote-tracking branch 'circuitpython/main' into thunderpack1.2
2020-11-23 22:40:47 -08:00
6ff24410eb
use values pointer directly
2020-11-24 11:44:11 +05:30
9dd1783da5
Merge branch 'main' into ps2io-S2
2020-11-24 11:11:11 +05:30
7a45afc549
working, but need to avoid deep sleeping too fast before USB ready
2020-11-23 22:44:53 -05:00
ebdc48ae22
Merge pull request #3745 from kattni/magtag-pin-update
...
Add pin names from silk
2020-11-23 19:48:12 -05:00
e5cee98977
removing icy tree files/directory
2020-11-23 19:31:06 -05:00
2635132ce5
adding 'haxpress' kind of build for CP Sapling for use with SPI Flash
2020-11-23 19:21:12 -05:00
1c9f33a372
Replace reset with mux change
2020-11-23 19:01:30 -05:00
86694262b8
Merge remote-tracking branch 'upstream/main' into esp32-pin-reset
2020-11-23 18:58:46 -05:00
8ffd973e22
Merge remote-tracking branch 'upstream/main' into esp32s2-udp
2020-11-23 18:40:14 -05:00
a80bf22211
Merge pull request #3727 from BennyE/wifi-full-scan
...
esp32s2: Do a full scan when channel/BSSID are not given
2020-11-23 15:19:57 -08:00
f8dcb25170
Merge pull request #3694 from jepler/update-ulab2
...
ulab: Update to release tag 1.1.0
2020-11-23 15:17:46 -08:00
491e314799
Merge pull request #3718 from jepler/epd-rotation
...
EPaperDisplay: add rotation property
2020-11-23 15:04:26 -08:00
c67f5892ff
Merge pull request #3704 from microDev1/frequencyio-S2
...
ESP32S2: Support for FrequencyIO
2020-11-23 14:59:27 -08:00
7928a0d454
Blank lines to group aliases.
2020-11-23 16:02:45 -05:00
3730862362
Update to match silk rev 1
2020-11-23 15:56:36 -05:00
efda912437
Add pin names from silk
2020-11-23 15:53:28 -05:00
16fe2de703
Merge pull request #3732 from skerr92/add-cpsapling
...
adding CP-Sapling
2020-11-23 10:29:58 -06:00
70e978f48b
stm: disable ulab on two resource-constrained boards
2020-11-23 10:23:53 -06:00
4c5e7520f5
Fix NVM by clearing FLASH_FLAG_PGPERR
2020-11-23 00:25:41 -08:00
3abee9b256
compiles; maybe ready to test, or almost
2020-11-22 21:52:37 -05:00
661c20dd18
Create a new linker script with more space for the firmware.
2020-11-22 18:25:37 -08:00
25591a3f8a
Merge branch 'esp32s2-common-hal-mcu-delay-us' into sleep
2020-11-22 21:01:49 -05:00
a0f1ec3c4a
wip
2020-11-22 19:10:09 -05:00
f62ea25331
ESP32S2: common_hal_mcu_delay_us() now calls mp_hal_delay_us()
2020-11-22 19:08:27 -05:00
f3b5ca5f01
replace goto with conditional break
2020-11-22 19:20:21 +05:30
048ca2a570
get multiple touchpad working
2020-11-22 18:54:18 +05:30
fe6e50b770
Update USB_PID
2020-11-22 01:49:23 -08:00
56634eb00e
Rename thunderpack to v11
2020-11-22 01:31:41 -08:00
381889f6bc
Cleanup
2020-11-22 01:19:28 -08:00
0b858440b0
Fix formatting.
2020-11-22 01:15:05 -08:00
63b0bf9075
Merge remote-tracking branch 'origin/main' into thunderpack1.2
2020-11-22 01:07:03 -08:00
75559f35cc
wip: ResetReason to microcontroller.cpu
2020-11-21 23:29:52 -05:00
e4c66990e2
compiles
2020-11-20 23:33:39 -05:00
1c92b1bf61
forgot to run pre-commit local
2020-11-20 15:35:52 -05:00
c4f4cdd8c1
readding cp_sapling directory
2020-11-20 15:31:49 -05:00
29e91424d4
removing cp sapling temporarily to read
2020-11-20 15:29:35 -05:00
b69bbfa3d6
fixed issues with trailing whitespace check
2020-11-20 15:17:44 -05:00
0a06530d52
adding CP-Sapling
2020-11-20 15:06:57 -05:00
2773f534c9
Update ports/esp32s2/common-hal/wifi/Radio.c
...
adding suggested changes
2020-11-20 09:40:32 +01:00
6760cdf678
Let connect() choose strongest AP if channel and BSSID are not given
2020-11-20 00:11:17 +01:00
39e1f52e28
wip; not compiling yet
2020-11-19 17:47:12 -05:00
17a8bafe05
Choose best AP in range if no channel/bssid given
2020-11-19 23:39:48 +01:00
2f14609044
Merge pull request #3716 from jepler/keep-event-loop
...
esp32s2: don't delete the event loop
2020-11-19 14:28:31 -08:00
aaca3eccf1
samd: PDMIn: Reduce code unrolling on samd21 only
...
Instead of unrolling the code 16 times, unroll it 4 times and loop
over it 4 times. This gives the same 16 iterations, but at an expense
of less flash space.
2020-11-19 16:19:37 -06:00
c06fc8e02d
Introduce, use mp_raise_arg1
...
This raises an exception with a given object value. Saves a bit of
code size.
2020-11-19 16:15:06 -06:00
0556f9f851
Revert "samd21: Enable terse error reporting on resource constrained chip family"
...
This reverts commit 9a642fc049
2020-11-19 15:12:56 -06:00
cd436bad1a
Merge remote-tracking branch 'adafruit/main' into sleep
2020-11-19 15:43:49 -05:00
649c930536
wip
2020-11-19 15:43:39 -05:00
a25b27520d
update nvm implementation
2020-11-20 00:22:00 +05:30
bc9036f353
use pointer to get nvs handle
2020-11-20 00:15:30 +05:30
dd108b755d
esp32s2: initialize event loop ane netif only once
...
deinitting these seems to cause problems.
2020-11-19 11:36:02 -06:00
76d4824728
spresense: Return fixed stack
2020-11-19 15:04:52 +01:00
040eaa0443
re-organize and clean-up
2020-11-19 15:30:15 +05:30
b56645808c
fix crash on user code exit
2020-11-19 11:44:22 +05:30
5bb3c321e9
merge from main
2020-11-19 00:29:14 -05:00
682054a216
WIP: redo API; not compiled yet
2020-11-19 00:23:27 -05:00
9a642fc049
samd21: Enable terse error reporting on resource constrained chip family
...
This reclaims over 1kB of flash space by simplifying certain exception
messages. e.g., it will no longer display the requested/actual length
when a fixed list/tuple of N items is needed:
if (MICROPY_ERROR_REPORTING == MICROPY_ERROR_REPORTING_TERSE) {
mp_raise_ValueError(translate("tuple/list has wrong length"));
} else {
mp_raise_ValueError_varg(translate("requested length %d but object has length %d"),
(int)len, (int)seq_len);
Other chip families including samd51 keep their current error reporting
capabilities.
2020-11-18 20:37:36 -06:00
081aec4429
Retry connection when getting NOT_AUTHED
...
I saw it once with a correct password. Retrying may still fail
but at least it'll try first.
2020-11-18 16:39:34 -08:00
83d790ad8f
esp32s2: don't delete the event loop
...
.. it seems to make the esp-idf grumpy.
2020-11-18 17:45:42 -06:00
0d3e81f969
update interrupt handling
2020-11-18 22:22:42 +05:30
bab41afce7
ps2io implementation for esp32s2
2020-11-18 12:34:56 +05:30
c457d373e1
update init_timer & frequency calculation
2020-11-18 12:24:48 +05:30
ff987e7496
add timer peripheral
2020-11-18 12:16:14 +05:30
9206925bf8
esp32s2: port_get_raw_ticks: Use a more efficient, monotonic routine
...
While trying to debug #3572 , I noticed that I would frequently break in
the midst of gettimeofday and that the routine get_adjusted_boot_time
had to take and release locks. Furthermore, we don't want "adjusted"
boot time, which could go forwards or backwards depending on the
adjustment (such as setting the clock used by gettimeofday() to the network
time)
2020-11-17 17:45:41 -06:00
1bc770c3dc
esp32s2: PulseIn: Fix supervisor tick enabling
...
Before, there were two problems:
* Even if a pulsein was never constructed, supervisor_disable_tick
would occur during restart. This could cancel out a supervisor_enable_tick
from someplace else, with unexpected results.
* If two or more pulseins were constructed, each one would enable ticks,
but only the last one deinited (or the reset routine) would disable,
leaving ticks running indefinitely.
In my testing, it seemed that this led to the board sometimes stopping when
it should have auto-reloaded.
2020-11-17 17:45:41 -06:00
e2b5ae2d77
Merge pull request #3689 from jepler/issue-3688
...
esp32s2: wifi: fix several debug-build errors
2020-11-17 13:26:43 -08:00
0bbdf05936
Implement recvfrom_into and sendto for UDP
2020-11-17 16:11:04 -05:00
5f0a372a22
Merge tag '6.0.0' into thunderpack1.2
2020-11-17 00:02:24 -08:00
119e9d3820
Add Thunderpack 1.2
2020-11-16 23:50:00 -08:00
33ca357094
fix VID and PID
2020-11-16 22:10:37 -06:00
089fa82067
Fix pre-commit
2020-11-16 21:21:24 -06:00
66fb095069
Merge pull request #3667 from microDev1/watchdog-s2
...
ESP32S2: Support for WatchDog
2020-11-16 15:01:54 -08:00
f4fd236605
Merge pull request #3698 from BennyE/disablesoftap
...
esp32s2: Set station mode early to avoid SoftAP on startup
2020-11-16 14:51:57 -08:00
f8eed1f74c
Merge pull request #3691 from jepler/issue-3424
...
esp32s2: Update esp-idf submodule to include fix for #3424
2020-11-16 14:21:13 -08:00
0686cde226
update internal nvm size
2020-11-17 01:19:12 +05:30
18e463cca5
add pcnt overflow handler & clean-up
2020-11-16 23:32:22 +05:30
ffff02c053
Merge remote-tracking branch 'adafruit/main' into sleep
2020-11-16 12:06:11 -05:00
bb77f1d130
wip: initial code changes, starting from @tannewt's sleepio branch
2020-11-16 11:56:20 -05:00
f2824f6a68
update frequency measurement
2020-11-16 12:55:55 +05:30
2bec02738f
move interrupt handler to iram
2020-11-16 11:44:11 +05:30
d4ab00f734
Set station mode early to avoid SoftAP on startup
2020-11-16 00:31:06 +01:00
c4917cdabd
frequencyio implementation for esp32s2
2020-11-16 00:11:00 +05:30
231e3d362d
esp32s2: Update esp-idf submodule to include fix for #3424
...
This re-points the submodule to my personal fork of esp-idf.
Users may need to `git submodule sync` in their existing trees when
this change occurs.
Adds just the following commit in esp-idf:
> esp_crt_bundle: Allow verify_callback to correct BADCERT_BAD_MD
2020-11-14 10:16:39 -06:00
146adca060
Add watchdog mode raise
2020-11-14 11:41:14 +05:30
bda3267432
Save flash space
...
* No weak link for modules. It only impacts _os and _time and is
already disabled for non-full builds.
* Turn off PA00 and PA01 because they are the crystal on the Metro
M0 Express.
* Change ejected default to false to move it to BSS. It is set on
USB connection anyway.
* Set sinc_filter to const. Doesn't help flash but keeps it out of
RAM.
2020-11-13 18:57:52 -08:00
68eb809fbf
Update parallel bus signatures
2020-11-13 18:57:52 -08:00
8d4296f964
Add board.DISPLAY to MagTag. Fix luma computation
...
* Initialize the EPaper display on the MagTag at start.
* Tweak the display send to take a const buffer.
* Correct Luma math
* Multiply the blue component, not add.
* Add all of the components together before dividing. This
reduces the impact of truncated division.
2020-11-13 18:57:52 -08:00
0f7081781e
esp32s2: wifi: fix several debug-build errors
...
Closes #3688
With this change, I don't get the ESP_ERROR_CHECK failed repeatedly
running code that imports wifi. (I'm not getting a successful connection
but that's probably my own fault, such as a secrets problem)
2020-11-12 20:40:45 -06:00
c9952798fb
Merge pull request #3683 from BHDynamics/dynossat_edu
...
Rename pins on dynossat_edu_eps to make them the same as the Arduino core
2020-11-12 12:33:16 -08:00
aa68b17223
Freed some more space
2020-11-12 13:26:26 +01:00
9774736a50
Rename pins to make them the same as the Arduino core
2020-11-12 12:30:34 +01:00
ff41180237
pcnt reset on reload
2020-11-12 16:30:30 +05:30
a47dea4922
Merge pull request #3671 from FoamyGuy/um_feathers2_board_spi_i2c
...
board.SPI() and board.I2C() for UnexpectedMaker Feather S2
2020-11-11 17:22:23 -08:00
35ef6c687f
nvm implementation for esp32s2
2020-11-11 23:11:12 +05:30
23ed3ef971
Removing frozen libs
2020-11-11 11:36:04 -06:00
f61c4e62c1
Removing from smaller builds
2020-11-11 10:24:33 -06:00
118ca7cff4
adding default uart pins
2020-11-11 06:56:57 -06:00
f9842566d8
Add default pin definitions
2020-11-11 10:22:48 +05:30
8373146c56
newline end of file
2020-11-10 15:29:17 -06:00
ddb3590944
Merge pull request #3647 from DavePutz/issue3579
...
Issue3579 - Check for CTRL-C During sleep on esp32s2
2020-11-10 13:09:57 -08:00
1192eebcdf
adding spi and i2c to board for um feather s2
2020-11-10 14:12:44 -06:00
21ca1b8c2b
Merge remote-tracking branch 'upstream/main' into esp32s2-udp
2020-11-10 14:59:32 -05:00
d16d27a449
Merge remote-tracking branch 'tannewt/esp32s2_udp' into esp32s2-udp
2020-11-10 14:51:36 -05:00
75a977febd
Merge pull request #3668 from jepler/esp32s2-stack-size
...
esp32s2: Correct port_stack_get_top()
2020-11-10 10:56:12 -08:00
10e8b8cf45
move port specific check
2020-11-11 00:24:01 +05:30
fe7ed99939
Split out extern declare to ports/esp32s2/supervisor/esp_port.h
2020-11-10 12:45:39 -06:00
44425b8d94
Requested review changes made
2020-11-10 11:32:59 -06:00
2d8ebfcf63
esp32s2: Correct port_stack_get_top()
...
Closes #3649
2020-11-10 10:42:53 -06:00
6c59836c5d
watchdog implementation for esp32s2
2020-11-10 16:32:46 +05:30
61bf0e99c6
Merge pull request #3653 from tannewt/magtag
...
Rebrand EInk Portal to MagTag
2020-11-09 16:00:09 -08:00
d1f15d314b
Rename to include display details
2020-11-09 15:03:22 -08:00
7ba2c5772c
Update license
2020-11-08 11:18:05 +05:30
55e0e2c4ba
Update rotaryio implementation
2020-11-08 11:12:32 +05:30
6a6e998ea5
Added BastBLE
2020-11-07 19:21:36 -06:00
479567059e
Merge branch 'main' into rotaryio-S2
2020-11-08 00:00:01 +05:30
b2e83952c0
Rebrand EInk Portal to MagTag
2020-11-06 15:27:16 -08:00
01c7a06dcc
Merge pull request #3615 from microDev1/CountIO-S2
...
ESP32S2: Support for CountIO
2020-11-06 12:29:13 -08:00
d948e6570f
Changes to handle Ctrl-C during sleep
2020-11-05 21:27:21 -06:00
36a8828fa3
Merge pull request #3632 from dhalbert/add-binascii
...
add binascii to most builds
2020-11-05 16:16:41 -05:00
ac8a0faa0d
update peripherals_pcnt_init()
2020-11-06 01:42:20 +05:30
81bb92bdd2
Merge pull request #3639 from tannewt/fix_recv
...
Rework socketpool.Socket.recv to return sooner
2020-11-05 14:11:13 -05:00
8fc1be5ef2
Merge pull request #3645 from BradChan/main
...
Modify the pins of the hiibot_bluefi.
2020-11-05 11:02:40 -08:00
c2aa54ae66
Check for Ctrl-C during sleeps
2020-11-05 11:10:40 -06:00
d8ef9a127b
rename pcnt_handler to pcnt
2020-11-05 10:10:39 +05:30
92cd599ea3
Modify the pins of the hiibot_bluefi.
2020-11-05 09:14:53 +08:00
e02539bdf5
Merge pull request #3633 from ITACAInnovation/patch-2
...
Update pins.c
2020-11-04 10:30:09 -08:00
fe6bfde590
move pcnt handler
2020-11-04 21:20:24 +05:30
472a5a99ec
Add API reset to reset_pin_number
2020-11-03 16:31:53 -05:00
5a079256d5
Merge pull request #3642 from ehagerty/patch-1
...
Update README.md
2020-11-03 13:02:58 -08:00
ca935c0daf
Update pins.c
...
Changed builtin to standard
2020-11-03 21:22:19 +01:00
441c2c41fb
Merge pull request #3641 from adafruit/6.0.x
...
Merge 6.0.x bugfixes to main
2020-11-03 09:46:44 -08:00
4055c5ac61
Update README.md
2020-11-03 17:14:58 +00:00
4938054c05
Merge pull request #3638 from ladyada/main
...
io naming for gpio (credit to @kattni)
2020-11-03 09:17:33 -05:00
0d0436bf69
Merge pull request #3637 from hierophect/esp32s2-neopixel-parallel
...
ESP32S2: Fix parallel strip issue with Neopixels
2020-11-02 23:39:37 -05:00
c4521287e3
add rx/tx default uart names
2020-11-02 23:22:53 -05:00
7441344c6f
Add new config options to default
2020-11-02 17:22:24 -08:00
18838e390a
reduce connection footprint and fix recv
2020-11-02 16:44:55 -08:00
6c61a53e0f
io naming for gpio (credit to @kattni)
2020-11-02 18:38:23 -05:00
23afe08b6f
Add GPIO reset to end of neopixel-write
2020-11-02 17:15:19 -05:00
1f7a3f0dfa
Rev C Feather M4 CAN pin changes
2020-11-02 15:28:30 -05:00
041c2a9f61
.../boards/bdmicro_vina_d51: PAD updates for better resource flexibility.
2020-11-02 08:35:25 -05:00
4e52757f26
Update pins.c
...
Added LED, BOOST_EN and VEXT_SELECT pins.
2020-11-01 22:22:55 +01:00
72b829dff0
add binascii to most builds
2020-11-01 14:52:03 -05:00
4438050f79
Add pcnt handler
2020-11-01 18:00:07 +05:30
1762a36438
restore analogio to feather_m0_rfm9x/rfm69 builds
2020-11-01 05:46:13 -05:00
144eb131ae
Merge pull request #3627 from adafruit/6.0.x
...
Merge 6.0.x bugfixes to main
2020-10-31 12:28:20 -04:00
9a8484b853
Update mpconfigboard.h
...
Removed ignore PA30 PA31 in order to allow using them as pinout
2020-10-31 11:06:56 +01:00
a7616808e9
Updated pinout
2020-10-31 10:12:49 +01:00
09ae9aefa8
Merge pull request #3610 from Edrig/main
...
Add new board to nrf port: holyiot_nrf52840
2020-10-30 12:03:34 -07:00
7fd73c7d39
Initial UDP work. Need to test
2020-10-28 18:08:31 -07:00
59b9ca409c
matrixportal ESP TX and RX pins were swapped
2020-10-28 20:33:10 -04:00
25bad660c6
add light sensor, move batt monitor
2020-10-28 19:23:18 -04:00
7cbc50962b
Merge pull request #3611 from tannewt/esp32s2_eink_portal
...
Add Adafruit ESP EInk Portal and grayscale EInk support
2020-10-28 14:45:29 -07:00
5ab2f16f64
Change Board Name to ADM_B_NRF52840_1
...
edit : .github/workflows/build.yml
rename : ports/nrf/boards/holyiot_nrf52840/board.c -> ports/nrf/boards/ADM_B_NRF52840_1/board.c
rename : ports/nrf/boards/holyiot_nrf52840/mpconfigboard.h -> ports/nrf/boards/ADM_B_NRF52840_1/mpconfigboard.h
rename : ports/nrf/boards/holyiot_nrf52840/mpconfigboard.mk -> ports/nrf/boards/ADM_B_NRF52840_1/mpconfigboard.mk
rename : ports/nrf/boards/holyiot_nrf52840/pins.c -> ports/nrf/boards/ADM_B_NRF52840_1/pins.c
2020-10-28 22:08:10 +01:00
5e3bfa1956
countio implementation for esp32s2
2020-10-28 20:08:25 +05:30
9a4efed8cb
Start tweaking the workflow to sleep
2020-10-27 17:55:03 -07:00
b44011d196
fix railing Whitespace pin.c
2020-10-28 01:43:42 +01:00
b5c95e3b1a
Merge branch 'main' of https://github.com/Edrig/circuitpython into main
...
modifié : boards/holyiot_nrf52840/pins.c
2020-10-28 00:40:46 +01:00
9b911b2211
modifié : pins.c
2020-10-28 00:38:07 +01:00
27827a4fef
Fix EOF error
...
modifié : mpconfigboard.mk
modifié : pins.c
2020-10-28 00:34:07 +01:00
930cf14dce
Add check for invalid io, function to disable all alarms
2020-10-27 16:17:26 -07:00
e35938971a
Add description of alarm modules
2020-10-27 16:16:55 -07:00
59df1a11ad
Add alarm_touch module
2020-10-27 16:16:52 -07:00
da449723df
Fix build error
2020-10-27 16:16:15 -07:00
4d8ffdca8d
restructure alarm modules
2020-10-27 16:15:09 -07:00
e5ff55b15c
Renamed alarm modules
2020-10-27 16:13:25 -07:00
21ba61afbb
Add function to disable alarm
2020-10-27 16:13:25 -07:00
05a3f203db
Add function to get time elapsed during sleep
2020-10-27 16:13:25 -07:00
e310b871c8
Get io wake working
2020-10-27 16:13:25 -07:00
90b9ec6f2c
Initial Sleep Support
2020-10-27 16:13:22 -07:00
d0426b3438
Update pins.c
...
fix mistake
2020-10-27 23:54:46 +01:00
557a58b244
Merge pull request #3591 from microDev1/TouchIO-S2
...
ESP32S2: Support for native TouchIO
2020-10-27 14:11:39 -07:00
73162bda85
Merge pull request #3584 from jepler/can-esp32s2
...
esp32s2: implement canio
2020-10-27 14:01:07 -07:00
54c0e98a37
Fix openbook build
2020-10-27 13:58:23 -07:00
80029f6929
rotaryio implementation for esp32s2
2020-10-28 00:12:13 +05:30
5110fec312
Merge pull request #3608 from adafruit/6.0.x
...
Update main with latest 6.0.x
2020-10-27 11:47:44 -05:00
3a501a0495
esp32s2: canio: respond to review comments
...
* explain the introduction of the temporary variable in get_t_config
* get rid of unneeded __attribute__
* get rid of unneeded members of canio_can_obj_t
* get rid of unneeded header inclusion
2020-10-26 19:18:37 -05:00
2ba6659967
esp32s2: Makefile: restore --no-stub
2020-10-26 19:07:37 -05:00
95cb5961d2
Fix ESP32-S2 SPI when DMA is sometimes used
2020-10-26 16:59:59 -07:00
fc591c8d84
Add EInk Portal
2020-10-26 16:59:59 -07:00
5deb045a81
Ready to PR
...
* ../../.github/workflows/build.yml
+ boards/holyiot_nrf52840/board.c
+ boards/holyiot_nrf52840/mpconfigboard.h
+ boards/holyiot_nrf52840/mpconfigboard.mk
+ boards/holyiot_nrf52840/pins.c
2020-10-26 23:32:57 +01:00
caca0609bd
Merge pull request #3607 from hierophect/esp32-readme-clarity
...
ESP32-S2: Fix readme link, improve instruction clarity
2020-10-26 12:43:51 -05:00
32f2a8d54c
Fix readme link
2020-10-26 11:03:54 -04:00
396d92f867
esp32s2: Add canio
...
This works in loopback mode, though the hardware filtering only permits a
single address or mask filter.
2020-10-26 09:54:58 -05:00
ef97ed6ab6
Update touchio implementation
2020-10-23 13:17:49 +05:30
c8808f41a5
Merge pull request #3580 from astrobokonon/esp32s2-FixSTAMODE
...
ESP32S2: Reset sta_mode and ap_mode flags
2020-10-22 13:48:45 -07:00
f431f859e7
Initial support for native touchio
2020-10-22 21:32:44 +05:30
fa4c4c2c10
Merge pull request #3587 from adafruit/6.0.x
...
Merge in two fixes from 6.0.x
2020-10-21 20:12:20 -05:00
ff69ab603d
fix CPB SPI pin definitions
2020-10-21 17:07:30 -04:00
50e90088a2
Merge pull request #3586 from Targett363/esp32s2_module_clip
...
Esp32s2 module clip
2020-10-21 12:58:23 -07:00
e202da4dad
Change comment wording
2020-10-20 15:14:35 -07:00
c58b0adf64
Reset sta_mode and ap_mode flags
2020-10-20 14:49:57 -07:00
1a677406bf
Merge pull request #3529 from jensechu/color-converter-transparency
...
displayio: Pass transparent_color to ColorConverter
2020-10-20 10:41:57 -07:00
8beb36c240
Use one lto partition
...
This leads to smaller code size at the expense of slower linking.
We can turn partitioning back on with GCC10 because it produces smaller code.
2020-10-20 09:24:03 -07:00
1eab0692b5
Fix missing `nproc` on macOS.
...
396979a
2020-10-20 16:39:32 +02:00
a2fce305d6
Replacing placeholder PIDs with correct PIDs
2020-10-20 10:42:14 +01:00
eb139c9bab
Correct pins to not reset.
...
They must have the PORT_ prefix otherwise they mask the wrong pins.
Fixes #3552
2020-10-19 17:41:16 -07:00
d606a3e968
Merge pull request #3484 from astrobokonon/esp32s2-morenet
...
Esp32s2: Expose more network parameters
2020-10-19 15:07:20 -07:00
d98b312886
Merge pull request #3541 from jepler/lto-parallel
...
atmel-samd: parallelize lto linking
2020-10-19 15:05:45 -07:00
d6805c0dd4
SDA and SCL were flipped
2020-10-18 17:15:59 -07:00
cc411f47eb
samd: Update peripherals submodule
...
(https://github.com/adafruit/samd-peripherals/pull/37 )
2020-10-17 20:08:32 -05:00
fb768dfc14
samd: AnalogOut: Better handle boards which IGNOREd analog pins
2020-10-17 20:08:32 -05:00
194d99f588
sparkfun_lumidrive: Can't IGNORE pins that are default bus pins
...
The SDA, SCL, and MISO pins were ignored. This error was not diagnosed
before now.
2020-10-17 20:08:32 -05:00
eb0b023dee
samd: extend IGNORE_PIN_foo to all sam e5x/e5x pins
2020-10-17 20:08:32 -05:00
4b9fc5de53
samd: update peripherals submodule
...
this is possible now that the undefined reference to pin_PA30 has been
resolved.
2020-10-17 20:08:32 -05:00
aa3c890ead
samd: pin: Fix 'undefined reference to pin_PA30'
...
.. when PA30 is IGNOREd
2020-10-17 20:08:32 -05:00
396979a67e
atmel-samd: parallelize lto linking
...
This decreases the link time, especially on desktop machines with many CPU
cores. However, it does come at a slight cost in binary size, making the flash
section about 200 bytes bigger for circuitplayground_express.
Before, linking build-circuitplayground_express/firmware.elf takes
8.8s elapsed time, leaving 3128 bytes free in flash.
After, linking build-circuitplayground_express/firmware.elf takes 2.8s elapsed
time, leaving 2924 bytes free in flash. (-6 seconds, -204 bytes free)
If necessary, we can make this per-board or even per-translation to squeeze full
builds.
2020-10-17 20:08:32 -05:00
76f1db7a87
Set sta_mode flag for actual use/checking
2020-10-17 00:23:31 -07:00
878f2322e7
Merge pull request #3564 from BHDynamics/dynossat_edu
...
Add DynOSSAT-EDU boards
2020-10-16 11:30:42 -07:00
6e355ec598
Merge pull request #3560 from dhalbert/pervasive-bleio-hci
...
enable CIRCUITPY_BLEIO_HCI on non-nRF boards where it will fit
2020-10-16 10:00:50 -07:00
6631c8d393
Add USB VID&PID
2020-10-16 13:52:46 +02:00
9d840aab0b
Cleaned up and now testing
2020-10-15 23:45:11 -07:00
b336039aab
Disable the long way and return an ap_info object
...
still needs work and cleanup
2020-10-15 23:18:30 -07:00
12ed3fc72f
disable on winterbloom_sol and thunderpack
2020-10-15 18:48:28 -04:00
6b272eeb27
Merge pull request #3555 from UnexpectedCircuitPython/main
...
Added default LWIP hostnames to FeatherS2 boards
2020-10-15 15:12:40 -07:00
31223e4ae5
Merge pull request #3530 from askpatrickw/hostname-example
...
Set default hostname
2020-10-15 15:11:58 -07:00
1d05ad6b22
no _bleio for litex; ESP32S2 defines BIT() already
2020-10-15 16:34:19 -04:00
45a3bd1c04
Added default LWIP hostnames to FeatherS2 boards
2020-10-16 06:47:59 +11:00
f51e75c1d2
cxd56 needed more precise include for __packed; needed SRC_C += on some ports
2020-10-15 15:24:24 -04:00
b67acea587
Merge pull request #3547 from microDev1/wifiHost
...
Add method to set custom hostname
2020-10-15 11:17:07 -07:00
82b49afe43
enable CIRCUITPY_BLEIO_HCI on non-nRF boards where it will fit
2020-10-15 11:27:21 -04:00
97fae54659
Add DynOSSAT-EDU boards
2020-10-15 12:39:14 +02:00
f1e8f2b404
Merge pull request #3554 from gamblor21/move_ordereddict
...
Moved ORDEREDDICT define to central location
2020-10-14 22:39:04 -04:00
0a9bcc538b
Removed ordered dict for all SAMD21
2020-10-14 20:15:21 -05:00
e6d0b207ec
Removed MICROPY_PY_COLLECTIONS_NAMEDTUPLE__ASDICT from unix coverage
2020-10-14 14:06:34 -05:00
cc8f8d8604
Merge pull request #3549 from tannewt/stm_alarm_tweak
...
Fix stm sleep too long
2020-10-14 11:12:26 -07:00
852a91e1b7
boards/bdmicro_vina_d51/pins.c: Fix illegal QSTR name (hyphen).
2020-10-14 08:29:28 -04:00
18fbff4f57
Update wifi hostname method
2020-10-14 11:11:59 +05:30
e9c04bc1f0
Merge pull request #3550 from bd34n/bdmicro_vina_d51
...
Add new board to atmel-samd port: bdmicro_vina_d51
2020-10-13 23:15:25 -04:00
4270061db4
Moved ORDEREDDICT define to central location
2020-10-13 18:52:27 -05:00
56427d9abe
Fix stm sleep too long
2020-10-13 14:02:29 -07:00
2b33968a1e
Add new board to atmel-samd port: bdmicro_vina_d51
2020-10-13 16:46:25 -04:00
3d21eec3cd
Merge pull request #3546 from tannewt/rtc_irq
...
Finer grained, per port tick locking
2020-10-13 13:39:32 -07:00
2bc40bcadf
Remove readreq when changing continuous
2020-10-13 10:15:34 -07:00
33dee4ae07
Merge pull request #3545 from tannewt/stm_rtc
...
Fix STM RTC read so it's atomic.
2020-10-13 10:10:50 -07:00
ceb531086e
Add method to set custom hostname
2020-10-13 14:22:02 +05:30
379e73af2e
Finer grained, per port tick locking
...
Fixes #3504 hopefully.
2020-10-12 18:43:21 -07:00
a0e5e961c5
Fix STM RTC read so it's atomic.
...
Fixes #3376
2020-10-12 17:43:25 -07:00
9de96786ad
Merge pull request #3538 from jepler/parallel-qstrlast
...
build: parallelize the qstr build steps
2020-10-12 15:52:43 -07:00
bb046f9983
Merge pull request #3540 from WarriorOfWire/async_syntax
...
__await__ magic method and async/await
2020-10-12 15:31:43 -07:00
638c7f7b57
Merge pull request #3514 from hierophect/esp32-analogout
...
ESP32-S2: AnalogOut
2020-10-12 15:08:50 -07:00
8ddbebd2c1
esp32s2: fix build after qstr rule changes
2020-10-12 13:35:15 -05:00
10badd93c3
leftover newlines
2020-10-11 22:52:27 -07:00
94beeabc51
remove unnecessary board configuration and address feedback
2020-10-11 22:42:59 -07:00
3c46e3a6aa
Turn off async for circuitplayground express
...
Firmware too large
2020-10-11 08:16:36 -07:00
Dan Halbert
Scott Shawcroft
Bernhard Boser
Scott Shawcroft
gamblor21
Bernhard Boser
Dan Halbert
Mark
Christian Walther
microDev
Jeff Epler
Lucian Copeland
Jeff Epler
Seth Kerr
jgillick
Kattni Rembor
BennyE
Kamil Tomaszewski
sabas1080
BennyE
Enrique Casado
foamyguy
root
cyz
ITACA Innovation S.R.L
Ed Hagerty
Limor "Ladyada" Fried
Brian Dean
Jerry Needell
Gaetan
Noel Gaetan
Ryan T. Hamilton
Targett363
askpatricw
Seon Rozenblum
Kenny
Kenny