4e1f7d43eb
added exception for PULL_UP; corrected open_drain handling
2018-04-27 02:51:07 +00:00
441ce2a78f
reset GPIO16 to input on deinit
2018-04-26 01:35:58 +00:00
bd5a5daaae
updated GPIO16 construct and handling
2018-04-25 03:59:36 +00:00
e70ece4c41
now checks for proper pin in is_pin_free; initialize GPIO16 as input in reset_pins
2018-04-25 03:57:09 +00:00
48f595ee13
convert wrapper class to just a module
2018-04-24 13:28:26 -04:00
9daa1a68d8
HID gamepad support
2018-04-23 23:51:23 -04:00
58ba74194e
Merge pull request #765 from jerryneedell/jerryn_tick
...
modify tick_delay to handle SysTick->VAL rollover
2018-04-20 15:40:00 -04:00
bef05ffbf1
cleanup in tick.c
2018-04-20 15:23:03 -04:00
fe738598da
modify tick.c to simplify - remove interupt disable from common_hal_pulseio_pulsein_resume
2018-04-20 11:59:33 -04:00
16bb40b110
modify tic.c to chec if interrupts are enabled, rename us_between_ticks to us until_next_tick
2018-04-19 22:25:48 -04:00
3399d541c3
Merge remote-tracking branch 'origin/master' into jerryn_tick
2018-04-19 20:54:47 -04:00
898a7d92e3
atmel-samd: Fix M4 RTC and ItsyBitsy M4 definition
2018-04-19 14:42:03 -04:00
a0eb51cc97
updated asf4_config: reverted oscillators to use internal vs external for RTC
2018-04-18 03:35:58 +00:00
e09d95067c
update tick.c (fix LOAD value) update PulseIn.c (do not enable interrupts for trigger_duration > 1000
2018-04-17 21:46:15 -04:00
7f7cbe8efa
Merge pull request #760 from ladyada/master
...
don't use python nrfutil on windows, go with exe we have in repo
2018-04-16 15:27:44 -07:00
81d395d825
Merge pull request #745 from notro/time_rtc
...
RFC: Add rtc module
2018-04-16 15:26:54 -07:00
e55e06d501
modify tick.c to work when interrupts disabled - modify PulseIn.c to cast argument to common_hal_delay_us
2018-04-16 08:11:14 -04:00
8e2080411f
atmel-samd: Add rtc module support
...
Support the rtc module by using hal_calendar.
2018-04-16 13:15:08 +02:00
812fe0c93f
Turn on nvm in 3.0.
...
Its 256b on M0 and 8k on M4 to match flash erase sizes.
Fixes #758
2018-04-13 16:22:28 -07:00
10eabf6bc2
Merge pull request #756 from tannewt/audio3
...
Add audio output support!
2018-04-13 14:59:10 -04:00
926849d7a8
don't use python nrfutil on windows, it doesnt work :/ tested feather52 makefile on windows/mingw
2018-04-13 14:00:20 -04:00
22194d5977
Tweaks based on dhalbert's feedback.
2018-04-13 10:51:01 -07:00
ce6b94f5e2
deal with spaces in directories
2018-04-12 21:43:23 -04:00
8dcfeb6240
Fix Makefile
2018-04-12 18:17:46 -07:00
28642ab10d
Add audio output support!
...
This evolves the API from 2.x (and breaks it). Playback devices are now
separate from the samples themselves. This allows for greater playback
flexibility. Two sample sources are audioio.RawSample and audioio.WaveFile.
They can both be mono or stereo. They can be output to audioio.AudioOut or
audiobusio.I2SOut.
Internally, the dma tracking has changed from a TC counting block transfers
to an interrupt generated by the block event sent to the EVSYS. This reduces
the overhead of each DMA transfer so multiple can occure without using up TCs.
Fixes #652 . Fixes #522 . Huge progress on #263
2018-04-12 16:35:13 -07:00
2a26dac2bc
Add initial ItsyBitsy M4 support
2018-04-12 11:16:52 -07:00
eaa9923a8f
force_create rename got lost due to editing error
2018-04-10 12:24:27 -04:00
04b2c8be5a
remove unnecessary includes in esp8266 common-hal storage code
2018-04-10 12:13:21 -04:00
5f98953ed8
esp8266 and nrf: raise NotImplementedError
2018-04-10 12:08:41 -04:00
1e9a27177c
esp8266: Disable "strict aliasing" in compiler like in atmel-samd
...
This caused a fatal compiler diagnostic after #750 . This compiler
flag is already specified in the atmel-samd builds, so it makes
sense to do it here for the same reasons.
2018-04-09 22:23:39 -04:00
eb7d0e317a
Create genhdr/ directory in time
2018-04-09 22:23:39 -04:00
aa8c262d14
add storage.erase_filesystem() to erase and reformat CIRCUITPY
2018-04-09 12:52:42 -04:00
4e053cea0d
Merge pull request #628 from sommersoft/super_status
...
Added Function To Check the Serial Connection From CircuitPython Layer
2018-04-08 22:06:09 -07:00
1e87a785b9
Move CDC Comm back to Interface 0 for compat with Win7 drivers.
2018-04-08 15:59:19 -04:00
726d5e52a3
Merge branch 'master' into 3.0_hid
2018-04-08 09:52:29 -04:00
a159b85340
Reorder composite device interfaces; fix report length bug
2018-04-08 09:33:02 -04:00
9672f3891e
Merge pull request #742 from jepler/esp8266-sdk-fixes
...
Adapt to incompatible changes in the ESP8266 SDK
2018-04-07 10:01:33 -07:00
d69ef6bfd3
esp8266/etshal: delete incorrect function prototypes
...
these are function prototypes not used in circuitpython. The
declarations began to conflict with ones in the upstream SDK
at some point, so delete them.
2018-04-06 20:37:48 -05:00
4982a3ad32
esp8266/esp8266_common.ld: Put .text of more libs into .irom0.text .
...
Recent vendor SDKs ship libs with code in .text section, which previously
was going into .irom0.text. Adjust the linker script to route these
sections back to iROM (follows upstream change).
2018-04-06 20:37:41 -05:00
fe6f5aaa70
atmel-samd: reset: reset() was always entering bootloader mode
...
.. set the dbl_tap word to a different special value unless
RUNMODE_BOOTLOADER was selected
2018-04-05 08:16:53 -05:00
5eb9f9d060
atmel-samd: Fix rebooting to bootloader
...
Commit efbf08266badafruit/circuitpython@efbf08266b . However, I only tested on
trinket_m0.
Closes : #739
2018-04-03 21:40:10 -05:00
beb6ad2e40
Add USB HID support, including Consumer Control
2018-04-02 21:37:44 -04:00
435e894fa0
Merge branch 'master' into 3.0_hid
2018-04-02 19:19:43 -04:00
d005b12326
WIP: seems to be done
2018-04-02 19:08:18 -04:00
c592b0e0f8
ports/windows: Remove appveyor.yml
...
.. this allows developers who want to work with both micropython and
circuitpython to enable appveyor on their fork, but not get errors
when pushing circuitpython changes.
In the appveyor configuration for your fork, simply enable the
checkbox "Skip branches without appveyor.yml".
2018-04-02 07:59:12 -05:00
d65ea992bf
Merge pull request #729 from jepler/tests-parallel-circuitpython
...
Optionally parallelize the testsuite
2018-03-31 09:55:21 -07:00
f8e0baa0b7
appveyor: parallelize tests
2018-03-31 10:43:57 -05:00
b59964f707
ports/unix/Makefile: parallelize tests
2018-03-31 10:42:33 -05:00
c00b25ec45
WIP: HID works with MSC interfaces removed
2018-03-30 23:31:28 -04:00
df91878d2e
WIP: works with just keyboard but not complex report descriptor
2018-03-30 23:24:00 -04:00
8af98d0dc9
ambiguized directory paths
2018-03-30 22:44:16 +00:00
a5b60647be
improved arrangement
2018-03-30 22:26:21 +00:00
7c0be04696
verbiage cleanup
2018-03-30 22:21:35 +00:00
c70acab8b3
updated README; added git submodule info
2018-03-30 22:16:36 +00:00
6ee573c7c9
Merge branch 'master' into super_status
2018-03-30 14:27:39 -05:00
676ed4e199
Merge pull request #724 from tannewt/fix_freetouch_submodule
...
Remove freetouch files that were accidentally checked in and
2018-03-28 14:24:32 -07:00
7b2215a27c
Merge pull request #723 from jepler/high-quality-float-hash
...
Enable high-quality float hash
2018-03-28 14:16:32 -07:00
19b0b414e6
Remove freetouch files that were accidentally checked in and
...
readd the submodule.
2018-03-28 14:04:53 -07:00
abec199c19
Enable high-quality float hash
...
This appears to have a relatively small impact on flash usage but
fixes some pathological slow behavior putting floats in dicts or sets.
Closes : #704
2018-03-27 21:56:30 -05:00
fe7f405fc7
Add VfsFat.label property
...
These allow accessing the filesystem label. For instance,
in boot.py, you can set the label on the built-in storage with:
storage.remount('/', False)
storage.getmount('/').label = "NEWLABEL"
storage.remount('/', True)
Users with multiple CIRCUITPY boards may find it desirable to
choose a different label for each board they own.
2018-03-27 21:28:18 -05:00
4c2f729a7a
Merge pull request #713 from jepler/lto-type-diagnostic-bis
...
Allow building on gcc 5.4, while preserving ability to build with 7.2
2018-03-27 09:28:41 -04:00
77938db8c8
Merge pull request #719 from tannewt/fix_i2c_hang
...
Fix I2C init hang when the SCL pin is pulled low.
2018-03-26 20:08:14 -04:00
4190aa2eed
Merge pull request #715 from jepler/array-operation-restrictions-bis
...
Remove 'O', 'P' support in arrays
2018-03-26 20:01:34 -04:00
cebcec5e63
Check for floating pins by pulling them low briefly before testing their values.
2018-03-26 16:32:16 -07:00
355bf8b553
Conditionally compile out nonstandard array/struct typecodes
...
.. defaulting to off for circuitpython-supported boards, on for others.
.. fixing up the tests that fail when it is turned off, so that they skip
instead of failing
2018-03-26 18:13:49 -05:00
25ba8ee489
Add an s because grammar.
2018-03-26 15:21:08 -07:00
37538fc0e7
Fix I2C init hang when the SCL pin is pulled low.
...
We added a check to make sure the pins are in a high state before
initing the bus. This leads to a friendly error message when someone
forgets to add the pull up resistors to their circuit.
2018-03-26 15:13:52 -07:00
ea39f4378e
Merge pull request #698 from sommersoft/repl_fix
...
Fix 128 Character Max Paste Into REPL
2018-03-26 13:02:43 -07:00
9bd55cf4c7
minor cleanup
2018-03-26 08:14:37 -05:00
23009fdd63
future-proof for buffer size changes
2018-03-26 06:25:04 +00:00
8b6aeb9e19
Merge pull request #702 from jepler/issue689bis
...
correct typo in filename
2018-03-25 23:58:00 -04:00
d57397f9c8
Remove an unneeded -Wno-error=lto-type-mismtach
2018-03-25 22:04:15 -05:00
c0029e1d97
Don't lose half of the processor's serial number
...
Before this change, `microcontroller.cpu.uid` returned values
where the top 4 bits of each byte were zero, because of
an incorrect bitmask used in this function.
2018-03-25 13:01:04 -05:00
31f5b6a238
WIP: simple working HID
2018-03-24 18:29:12 -04:00
d80e54458d
correct typo in filename
2018-03-24 10:44:24 -05:00
6205ed9a0c
updated cdc_enabled; now more dynamic status return
2018-03-24 03:42:58 +00:00
ef16109c5d
updated with requested changes
2018-03-24 00:55:48 +00:00
f237657e5e
extended buffer check to usb_cdc_background
2018-03-23 18:41:27 +00:00
63d826a52a
Update USB PID
2018-03-23 09:34:02 -07:00
ccbe557e30
removed leftover debugging bits
2018-03-23 15:45:30 +00:00
d434635822
add buffer check before triggering new usb read
2018-03-23 15:07:02 +00:00
fd7dcff4e9
Add Feather M4 Express support.
...
* Also fixed detection of SPI flash chip to correct look in the 2+
spots.
* Added support for using QSPI in dual read mode.
2018-03-23 00:00:13 -07:00
06b4c83f59
Add reminder to remove Saleae when going fast.
2018-03-22 17:44:44 -07:00
3bf4d69f67
Update Metro M4 to rev F and make flash reset on start.
2018-03-22 16:42:47 -07:00
a7e3c74fed
Autocreate files that prevent MacOS indexing of the CIRCUITPYTHON dive
...
.. the price of this appears to be about 112 bytes of flash and 12
bytes of RAM, according to the stats printed during the build.
It also uses up 4 directory entries (out of 128), but does not reduce
the number of blocks usable for storing file contents.
These are the same items noted in the Adafruit README for Trinket M0
as preventing MacOS indexing.
Closes : #689
2018-03-22 08:07:32 -05:00
9ab39eb2d2
Merge pull request #688 from jepler/atsamd-build-reqs
...
Better document build requirements and steps
2018-03-20 10:03:01 -07:00
0f90f35606
Merge pull request #685 from jepler/uart-diagnostic
...
UART: Fix maybe-uninitialized diagnostic
2018-03-20 09:59:31 -07:00
3f82fe8da9
README.rst: document mpy-cross gotcha
...
This was biting me, leading to an odd error later on.
2018-03-20 07:53:30 -05:00
fa491b4c32
README.rst: spell out gcc version requirements
...
.. the text was adapted from ports/stm32 and a conversation with
Dan Halbert.
2018-03-20 07:53:30 -05:00
dddfad6594
UART: Fix maybe-uninitialized diagnostic
...
The following error occurs when building with gcc 5.4.1 (debian stretch):
common-hal/busio/UART.c:104:83: error: 'sercom_index' may be used uninitialized in this function [-Werror=maybe-uninitialized]
sercom_insts[rx->sercom[j].index]->USART.CTRLA.bit.ENABLE == 0) ||
It may be related to the addition of rx-only UARTs; gcc is unable
to infer the intended relationship between have_tx and sercom_index
being set (I am still not entirely confident of it myself)
2018-03-19 20:40:04 -05:00
05e2a7d1ac
Added digital pin assignments
2018-03-15 20:28:09 -04:00
04b4026666
fix dotstar for Gemma_M0 in CP3.0
...
Uncomment lines in mpconfigport.h for gemma_m0 to allow dotstar access. same issue as #514 for trinket_m0
2018-03-14 21:28:56 -04:00
f173d45941
Merge pull request #678 from tannewt/m0_no_timer_fix
...
Correct NO_TIMER index value for SAMD21.
2018-03-14 15:04:39 -04:00
88aa0e2660
Remove SERCOM pointers from pin data structure because index is
...
enough.
This saves 380 bytes on the Arduino Zero build. (More pins ==
more savings.)
2018-03-14 11:14:32 -07:00
7a3f86d184
Check usb_busy up front in usb background function.
...
Waiting to do so risks accidentally queueing another response.
Hopefully fixes #655 but we'll let @jerryneedell confirm.
2018-03-14 10:32:41 -07:00
c37ade9aeb
Correct NO_TIMER index value for SAMD21.
...
We check validity by ensuring it's lower than the total number of
timers. 0 is a terrible number for the NO_TIMER value because its
valid even though it shouldn't be.
Fixes https://github.com/adafruit/Adafruit_CircuitPython_SimpleIO/issues/29
2018-03-13 12:44:00 -07:00
b64d568267
Merge pull request #677 from tannewt/usb_active_read
...
Move usb read finish into interrupt.
2018-03-13 15:16:40 -04:00
8157248189
Move usb read finish into interrupt.
...
Having the `active_read = false` in the background function left
a chance that a new_write occurs before active_read is set to false.
In that case, we'll read the appropriate data rather than write it
and never clear the active write.
Hopefully fixes #655 .
2018-03-13 11:29:29 -07:00
945f2f5aa1
line 172 has a typo correct 2MB to 4MB
2018-03-13 13:42:29 -04:00
81ab2526e4
gamepad: Enable the gamepad module for express boards in 3.x
2018-03-11 13:39:54 +01:00
sommersoft
Dan Halbert
Scott Shawcroft
Jerry Needell
Scott Shawcroft
Noralf Trønnes
ladyada
Jeff Epler
Paul Sokolovsky
sommersoft
Jeff Epler
Kattni
vesperk38
Radomir Dopieralski