3144654854
SPI for all boards
2018-05-16 15:36:36 -04:00
244866c2c3
spi on much
2018-05-16 15:25:24 -04:00
10888be8e8
fixed pins
2018-05-16 15:07:12 -04:00
8d1d821876
pin issue
2018-05-16 14:58:57 -04:00
fbb57f902d
better error message
2018-05-15 15:37:48 -04:00
ff6e6b5155
best effort
2018-05-15 15:33:27 -04:00
4e65752d6e
feather m0 boards
2018-05-15 15:28:23 -04:00
cdeb7ddff8
fix non- builds
2018-05-15 14:27:05 -04:00
cd1f6627e4
formatting
2018-05-15 14:09:00 -04:00
bd7f603748
zero + feather logger
2018-05-15 14:06:01 -04:00
a10f04ad6e
support for 2
2018-05-15 13:53:53 -04:00
b0bacd9b0b
review code
2018-05-15 13:15:24 -04:00
54293397c5
Merge pull request #837 from godlygeek/human_readable_oserror
...
Human readable OSError messages
2018-05-15 10:12:09 -04:00
0518cc1d94
Include uerrno for boards with external SPI flash
...
Signed-off-by: Matt Wozniski <mwozniski@bloomberg.net>
2018-05-14 15:12:35 -04:00
a0954b9e11
Fix for Issue #770 - Provide a better error message when timers are still available.
2018-05-14 13:52:32 -04:00
1661cbb6e1
Make python detection more robust and allow setting PYTHON2 and PYTHON3 to override python executables during build.
2018-05-14 11:19:19 -04:00
ce5eae1c76
Merge pull request #761 from jepler/nrf-modules
...
nrf: Enable binascii, hashlib modules
2018-05-11 19:40:45 -07:00
471fdae993
nrf: Enable binascii, hashlib modules
...
These modules would be very handy to have in order to implement a
more robust replacement for ampy. It costs around 2KiB of text and
no data or bss.
'binascii' has base64 encoding, which can be used to create a fully
8-bit-clean transport above the slightly cooked serial connection of
these boards.
'hashlib' is a bit less critical, but I have found it handy to
be able to robustly checksum remote files.
I see this as only being useful on ports which don't have USB block
device support, so atmel-samd doesn't need it. These modules are
already on esp8266 so I think nrf52 seems like the only one that
needs it.
2018-05-11 07:41:09 -05:00
51106db93d
Merge pull request #827 from dhalbert/3.0_pb_pins_digitalinout
...
PBxx pins were not setting DRVSTR or reporting PULL properly
2018-05-10 20:42:26 -07:00
240659da0e
PBxx pins were not setting DRVSTR or reporting PULL properly
2018-05-10 23:09:51 -04:00
2acd5d88b6
nrf52: enable framebuf module
...
Closes : #656
2018-05-10 18:37:08 -05:00
50fc90bc5f
Add pause/resume control to AudioOut and I2SOut
...
Fixes #808
2018-05-08 11:53:13 -07:00
d3a5d40374
Merge pull request #785 from notro/rtc_calibration
...
atmel-samd/samd21: Rework clock setup + calibration
2018-05-08 10:55:51 -07:00
e82f37c60e
enable cache in SAMD51
2018-05-07 21:55:37 -04:00
5d5d14709f
Add clock representation with calibration
...
Add a python representation of the clocks with the possibility to change
the calbration of clock sources.
2018-05-07 23:04:02 +02:00
56bf411d21
esp8266/modutime.c: remove symbol conflicts between time and utime modules
...
this renames symbols in modutime.c so that it no longer conflicts with
the time module. This commit does not enable the utime module; it
simply makes it easier for a local developer to do so.
2018-05-07 11:55:20 -04:00
b617271191
Update mpconfigport.h
...
comment out define of CIRCUITPYTHON_BOOT_OUTPUT_FILE for NRF52 -- it does not work properly
2018-05-07 08:59:24 -04:00
2893e795fc
atmel-samd/samd21: Use XOSC32K on boards with a crystal
...
Use XOSC32K on boards that have BOARD_HAS_CRYSTAL defined and set to 1.
2018-05-05 18:45:15 +02:00
4adba51569
atmel-samd/samd21: Rework clock setup
...
Make clock setup explicit instead of using the convoluted asf4 macro setup.
enable_clock_generator():
- Add GCLK_GENCTRL_OE to stick with the current setup.
- Handle divisor larger than 31 for generator 2
- Change the source argument so it can take the GCLK_GENCTRL_SRC_XXXX_Val
macros without casting to uint8_t.
This patch should not introduce any functional changes except keeping
GCLK_GENCTRL_OE enabled when the I2S clock is enabled.
2018-05-05 18:01:13 +02:00
d32349cee8
Merge pull request #804 from dhalbert/boot_out_fixes
...
3.0: Handle bad power on reset.
2018-05-04 10:06:35 -07:00
32363b801b
3.0: add CircuitPlayground and HID to CPX frozen modules
2018-05-04 08:44:33 -04:00
f21c2494cb
atmel-samd/samd21: Enable OSC32K
...
Enable OSC32K which is used by the RTC.
For some reason the RTC worked without enabling it.
2018-05-04 13:34:30 +02:00
4a2a553647
atmel-samd/clocks: Split out samd21_clocks.c and samd51_clocks.c
...
Enhance readability by separating the samd21 and samd51 clock code.
This patch should not introduce any functional changes.
2018-05-04 13:32:56 +02:00
f486ead84a
Handle bad power on reset.
2018-05-03 23:43:02 -04:00
a8bd37f14d
Merge pull request #799 from larsks/feature/circuitpython/station-ssid
...
esp8266/modnetwork: Allow to get ESSID of AP that STA is connected to.
2018-05-03 10:12:50 -07:00
1e0353e2db
esp8266/modnetwork: Allow to get ESSID of AP that STA is connected to.
...
This patch enables iface.config('essid') to work for both AP and STA
interfaces.
(cherry picked from commit d8fdb77ac9
2018-05-03 11:49:37 -04:00
ad1b16a3ec
ports/esp8266: try both binascii and ubinascii in inisetup.py
...
in recent circuitpython builds, `ubinascii` is available as
`binascii`. This modifies `modules/inisetup.py` to use the same
import semantics as `modules/websocket_helper.py`: first try importing
`ubinascii`, and if that fails, fall back to importing `binascii`.
Closes adafruit/circuitpython#795
2018-05-03 09:23:54 -04:00
9d484c4935
Merge pull request #789 from tannewt/pdmin3
...
Re-enable PDMIn without ASF
2018-05-02 19:59:20 -04:00
04f75b8903
Reduce the buffer size back to what 2.x has. Increase was leftover
...
from debugging.
2018-05-02 15:21:43 -07:00
22b7cd3d51
Fix 8 bit recordings on CPX.
...
The DMA trigger source was incorrect when using serializer 1 on
the SAMD21.
Playback register was incorrect for 8 bit as well. Now fixed.
2018-05-02 15:15:25 -07:00
449385b250
Merge pull request #790 from dhalbert/cpu_temp
...
Implement microcontroller.cpu.temperature.
2018-05-02 12:23:03 -07:00
33b9c39f58
peripherals.c should include peripherals.h
2018-05-02 13:50:34 -04:00
3e35cbcd5b
allow esptool.py invocation to be set via make vars
...
This commit replaces the literal calls to `esptool.py` with the
`$(ESPTOOL)` Makefile variable. This allows one to set the esptool
invocation on the Make command line:
make ESPTOOL="python2 $(which esptool.py)"
(or via the environment, an include file, etc)
Closes #793
2018-05-02 09:47:01 -04:00
e565282da9
fix minor comment typos
2018-05-01 22:04:11 -04:00
3a2b4af830
Implement microcontroller.cpu.temperature on '21 and '51.
2018-05-01 21:35:55 -04:00
681399f8db
atmel-samd: RTC: Improve precision when setting datetime
...
The prescaler is not reset when setting the counter so we can be off by
as much as 1023/1024 seconds. Fix this by resetting the RTC module.
2018-05-01 21:35:24 -04:00
cfea51ec68
Re-enable PDMIn without ASF and using the helpers added with
...
I2SOut.
The API is almost the same except the frequency attribute has been
renamed to sample_rate so that its less likely to be confused with
frequencies within the audio itself.
Fixes #263 .
2018-05-01 14:35:43 -07:00
dd0f8689a1
Merge pull request #786 from notro/rtc_set_datetime_precision
...
atmel-samd: RTC: Improve precision when setting datetime
2018-04-29 20:30:37 -07:00
62d7a800d7
atmel-samd: RTC: Improve precision when setting datetime
...
The prescaler is not reset when setting the counter so we can be off by
as much as 1023/1024 seconds. Fix this by resetting the RTC module.
2018-04-29 20:43:07 +02:00
396e4ffc34
implemented 'claim_pin' methodology; updated 'open_drain' handling
2018-04-28 17:27:23 +00:00
Matt Land
Dan Halbert
Matt Wozniski
Roy Hooper
Scott Shawcroft
Jeff Epler
Jeff Epler
Scott Shawcroft
Noralf Trønnes
Lars Kellogg-Stedman
jerryneedell
sommersoft