circuitpython/ports/nrf/common-hal/busio/SPI.c

/*
 * SPI Master library for nRF5x.
 *
 * Copyright (c) 2019 Dan Halbert for Adafruit Industries
 * Copyright (c) 2018 Artur Pacholec
 * Copyright (c) 2017 hathach
 * Copyright (c) 2016 Sandeep Mistry All right reserved.
 * Copyright (c) 2015 Arduino LLC
 *
 * This library is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2.1 of the License, or (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with this library; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
 */

#include "shared-bindings/busio/SPI.h"
#include "py/mperrno.h"
#include "py/runtime.h"

#include "nrfx_spim.h"
#include "nrf_gpio.h"

STATIC spim_peripheral_t spim_peripherals[] = {
#if NRFX_CHECK(NRFX_SPIM3_ENABLED)
    // SPIM3 exists only on nRF52840 and supports 32MHz max. All other SPIM's are only 8MHz max.
    // Allocate SPIM3 first.
    { .spim = NRFX_SPIM_INSTANCE(3),
      .max_frequency_MHz = 32,
      .max_xfer_size = SPIM3_EASYDMA_MAXCNT_SIZE,
    },
#endif
#if NRFX_CHECK(NRFX_SPIM2_ENABLED)
    // SPIM2 is not shared with a TWIM, so allocate before the shared ones.
    { .spim = NRFX_SPIM_INSTANCE(2),
      .max_frequency_MHz = 8,
      .max_xfer_size = SPIM2_EASYDMA_MAXCNT_SIZE,
    },
#endif
#if NRFX_CHECK(NRFX_SPIM1_ENABLED)
    // SPIM1 and TWIM1 share an address.
    { .spim = NRFX_SPIM_INSTANCE(1),
      .max_frequency_MHz = 8,
      .max_xfer_size = SPIM1_EASYDMA_MAXCNT_SIZE,
    },
#endif
#if NRFX_CHECK(NRFX_SPIM0_ENABLED)
    // SPIM0 and TWIM0 share an address.
    { .spim = NRFX_SPIM_INSTANCE(0),
      .max_frequency_MHz = 8,
      .max_xfer_size = SPIM0_EASYDMA_MAXCNT_SIZE,
    },
#endif
};

STATIC bool never_reset[MP_ARRAY_SIZE(spim_peripherals)];

void spi_reset(void) {
    for (size_t i = 0 ; i < MP_ARRAY_SIZE(spim_peripherals); i++) {
        if (never_reset[i]) {
            continue;
        }
        nrf_spim_disable(spim_peripherals[i].spim.p_reg);
    }
}

void common_hal_busio_spi_never_reset(busio_spi_obj_t *self) {
    for (size_t i = 0 ; i < MP_ARRAY_SIZE(spim_peripherals); i++) {
        if (self->spim_peripheral == &spim_peripherals[i]) {
            never_reset[i] = true;

            never_reset_pin_number(self->clock_pin_number);
            never_reset_pin_number(self->MOSI_pin_number);
            never_reset_pin_number(self->MISO_pin_number);
            break;
        }
    }
}

// Convert frequency to clock-speed-dependent value. Choose the next lower baudrate if in between
// available baudrates.
static nrf_spim_frequency_t baudrate_to_spim_frequency(const uint32_t baudrate) {

    static const struct {
        const uint32_t boundary;
        nrf_spim_frequency_t spim_frequency;
    } baudrate_map[] = {
#ifdef SPIM_FREQUENCY_FREQUENCY_M32
        { 32000000, NRF_SPIM_FREQ_32M },
#endif
#ifdef SPIM_FREQUENCY_FREQUENCY_M16
        { 16000000, NRF_SPIM_FREQ_16M },
#endif
        {  8000000, NRF_SPIM_FREQ_8M },
        {  4000000, NRF_SPIM_FREQ_4M },
        {  2000000, NRF_SPIM_FREQ_2M },
        {  1000000, NRF_SPIM_FREQ_1M },
        {   500000, NRF_SPIM_FREQ_500K },
        {   250000, NRF_SPIM_FREQ_250K },
        {        0, NRF_SPIM_FREQ_125K },
    };

    size_t i = 0;
    uint32_t boundary;
    do {
        boundary = baudrate_map[i].boundary;
        if (baudrate >= boundary) {
            return baudrate_map[i].spim_frequency;
        }
        i++;
    } while (boundary != 0);
    // Should not get here.
    return 0;
}

void common_hal_busio_spi_construct(busio_spi_obj_t *self, const mcu_pin_obj_t * clock, const mcu_pin_obj_t * mosi, const mcu_pin_obj_t * miso) {
    // Find a free instance.
    self->spim_peripheral = NULL;
    for (size_t i = 0 ; i < MP_ARRAY_SIZE(spim_peripherals); i++) {
        if ((spim_peripherals[i].spim.p_reg->ENABLE & SPIM_ENABLE_ENABLE_Msk) == 0) {
            self->spim_peripheral = &spim_peripherals[i];
            break;
        }
    }

    if (self->spim_peripheral == NULL) {
        mp_raise_ValueError(translate("All SPI peripherals are in use"));
    }

    nrfx_spim_config_t config = NRFX_SPIM_DEFAULT_CONFIG;
    config.frequency = NRF_SPIM_FREQ_8M;

    config.sck_pin = clock->number;
    self->clock_pin_number = clock->number;
    claim_pin(clock);

    if (mosi != (mcu_pin_obj_t*)&mp_const_none_obj) {
        config.mosi_pin = mosi->number;
        self->MOSI_pin_number = mosi->number;
        claim_pin(mosi);
    } else {
        self->MOSI_pin_number = NO_PIN;
    }

    if (miso != (mcu_pin_obj_t*)&mp_const_none_obj) {
        config.miso_pin = miso->number;
        self->MISO_pin_number = mosi->number;
        claim_pin(miso);
    } else {
        self->MISO_pin_number = NO_PIN;
    }

    nrfx_err_t err = nrfx_spim_init(&self->spim_peripheral->spim, &config, NULL, NULL);

    // A soft reset doesn't uninit the driver so we might end up with a invalid state
    if (err == NRFX_ERROR_INVALID_STATE) {
        nrfx_spim_uninit(&self->spim_peripheral->spim);
        err = nrfx_spim_init(&self->spim_peripheral->spim, &config, NULL, NULL);
    }

    if (err != NRFX_SUCCESS) {
        common_hal_busio_spi_deinit(self);
        mp_raise_OSError(MP_EIO);
    }
}

bool common_hal_busio_spi_deinited(busio_spi_obj_t *self) {
    return self->clock_pin_number == NO_PIN;
}

void common_hal_busio_spi_deinit(busio_spi_obj_t *self) {
    if (common_hal_busio_spi_deinited(self))
        return;

    nrfx_spim_uninit(&self->spim_peripheral->spim);

    reset_pin_number(self->clock_pin_number);
    reset_pin_number(self->MOSI_pin_number);
    reset_pin_number(self->MISO_pin_number);
}

bool common_hal_busio_spi_configure(busio_spi_obj_t *self, uint32_t baudrate, uint8_t polarity, uint8_t phase, uint8_t bits) {
    // nrf52 does not support 16 bit
    if (bits != 8) {
      return false;
    }

    // Set desired frequency, rounding down, and don't go above available frequency for this SPIM.
    nrf_spim_frequency_set(self->spim_peripheral->spim.p_reg,
                           baudrate_to_spim_frequency(MIN(baudrate,
                                                          self->spim_peripheral->max_frequency_MHz * 1000000)));

    nrf_spim_mode_t mode = NRF_SPIM_MODE_0;
    if (polarity) {
        mode = (phase) ? NRF_SPIM_MODE_3 : NRF_SPIM_MODE_2;
    } else {
        mode = (phase) ? NRF_SPIM_MODE_1 : NRF_SPIM_MODE_0;
    }

    nrf_spim_configure(self->spim_peripheral->spim.p_reg, mode, NRF_SPIM_BIT_ORDER_MSB_FIRST);

    return true;
}

bool common_hal_busio_spi_try_lock(busio_spi_obj_t *self) {
    bool grabbed_lock = false;
    // NRFX_CRITICAL_SECTION_ENTER();
    if (!self->has_lock) {
        grabbed_lock = true;
        self->has_lock = true;
    }
    // NRFX_CRITICAL_SECTION_EXIT();
    return grabbed_lock;
}

bool common_hal_busio_spi_has_lock(busio_spi_obj_t *self) {
    return self->has_lock;
}

void common_hal_busio_spi_unlock(busio_spi_obj_t *self) {
    self->has_lock = false;
}

bool common_hal_busio_spi_write(busio_spi_obj_t *self, const uint8_t *data, size_t len) {
    if (len == 0)
        return true;

    const uint32_t max_xfer_size = self->spim_peripheral->max_xfer_size;
    const uint32_t parts = len / max_xfer_size;
    const uint32_t remainder = len % max_xfer_size;

    for (uint32_t i = 0; i < parts; ++i) {
        const nrfx_spim_xfer_desc_t xfer = NRFX_SPIM_XFER_TX(data + i * max_xfer_size, max_xfer_size);
        if (nrfx_spim_xfer(&self->spim_peripheral->spim, &xfer, 0) != NRFX_SUCCESS)
            return false;
    }

    if (remainder > 0) {
        const nrfx_spim_xfer_desc_t xfer = NRFX_SPIM_XFER_TX(data + parts * max_xfer_size, remainder);
        if (nrfx_spim_xfer(&self->spim_peripheral->spim, &xfer, 0) != NRFX_SUCCESS)
            return false;
    }

    return true;
}

bool common_hal_busio_spi_read(busio_spi_obj_t *self, uint8_t *data, size_t len, uint8_t write_value) {
    if (len == 0)
        return true;

    const uint32_t max_xfer_size = self->spim_peripheral->max_xfer_size;
    const uint32_t parts = len / max_xfer_size;
    const uint32_t remainder = len % max_xfer_size;

    for (uint32_t i = 0; i < parts; ++i) {
        const nrfx_spim_xfer_desc_t xfer = NRFX_SPIM_XFER_RX(data + i * max_xfer_size, max_xfer_size);
        if (nrfx_spim_xfer(&self->spim_peripheral->spim, &xfer, 0) != NRFX_SUCCESS)
            return false;
    }

    if (remainder > 0) {
        const nrfx_spim_xfer_desc_t xfer = NRFX_SPIM_XFER_RX(data + parts * max_xfer_size, remainder);
        if (nrfx_spim_xfer(&self->spim_peripheral->spim, &xfer, 0) != NRFX_SUCCESS)
            return false;
    }

    return true;
}

bool common_hal_busio_spi_transfer(busio_spi_obj_t *self, uint8_t *data_out, uint8_t *data_in, size_t len) {
    if (len == 0)
        return true;


    const uint32_t max_xfer_size = self->spim_peripheral->max_xfer_size;
    const uint32_t parts = len / max_xfer_size;
    const uint32_t remainder = len % max_xfer_size;

    for (uint32_t i = 0; i < parts; ++i) {
        const nrfx_spim_xfer_desc_t xfer = NRFX_SPIM_SINGLE_XFER(data_out + i * max_xfer_size, max_xfer_size,
            data_in + i * max_xfer_size, max_xfer_size);
        if (nrfx_spim_xfer(&self->spim_peripheral->spim, &xfer, 0) != NRFX_SUCCESS)
            return false;
    }

    if (remainder > 0) {
        const nrfx_spim_xfer_desc_t xfer = NRFX_SPIM_SINGLE_XFER(data_out + parts * max_xfer_size, remainder,
            data_in + parts * max_xfer_size, remainder);
        if (nrfx_spim_xfer(&self->spim_peripheral->spim, &xfer, 0) != NRFX_SUCCESS)
            return false;
    }

    return true;
}

uint32_t common_hal_busio_spi_get_frequency(busio_spi_obj_t* self) {
    switch (self->spim_peripheral->spim.p_reg->FREQUENCY) {
    case NRF_SPIM_FREQ_125K:
        return 125000;
    case NRF_SPIM_FREQ_250K:
        return 250000;
    case NRF_SPIM_FREQ_500K:
        return 500000;
    case NRF_SPIM_FREQ_1M:
        return 1000000;
    case NRF_SPIM_FREQ_2M:
        return 2000000;
    case NRF_SPIM_FREQ_4M:
        return 4000000;
    case NRF_SPIM_FREQ_8M:
        return 8000000;
#ifdef SPIM_FREQUENCY_FREQUENCY_M16
    case NRF_SPIM_FREQ_16M:
        return 16000000;
#endif
#ifdef SPIM_FREQUENCY_FREQUENCY_M32
    case NRF_SPIM_FREQ_32M:
        return 32000000;
#endif
    default:
        return 0;
    }
}

uint8_t common_hal_busio_spi_get_phase(busio_spi_obj_t* self) {
    return 0;
}

uint8_t common_hal_busio_spi_get_polarity(busio_spi_obj_t* self) {
    return 0;
}