Glenn Ruben Bakke d9813910da nrf5/modules/machine/timer: If timer is used in combination with SOFT_PWM (implicitly use of ticker.c) guard the Timer1 instance from being instantiated trough python timer module. Also disable implementation of the HAL IRQ handler which is for now explicitly implemented in ticker.c for Timer1.

2017-05-25 00:25:14 +02:00

..

hal_adc.c

nrf5/hal: Aligning assignment in hal_adc.c

2017-01-23 00:10:04 +01:00

hal_adc.h

nrf5/adc: Updating adc module and hal with a new interface. No need for keeping peripheral base address in structure when there is only one peripheral (nrf51).

2017-01-12 17:20:08 +01:00

hal_adce.c

nrf5/hal: Removing stdio.h include in adce.c which were used for debugging.

2017-01-15 17:55:35 +01:00

hal_gpio.c

nrf5/hal/gpio: Adding initial gpiote implementation to handle IRQ on polarity change on a gpio.

2017-04-11 13:57:44 +02:00

hal_gpio.h

nrf5/hal/gpio: Add function to clear output register using a pin mask.

2017-05-08 21:20:08 +02:00

hal_irq.h

nrf5/hal/irq: Adding wrappers for handling nvic calls when Bluetooth LE stack is enabled.

2017-05-25 00:25:14 +02:00

hal_pwm.c

nrf5/hal/pwm: Updating PWM implementation to support manually set duty cycle period. Pulse width has precidence over duty cycle percentage. Also adding support for the two configurable modes, high to low, and low to high, duty cycles.

2017-04-18 20:56:19 +02:00

hal_pwm.h

nrf5/hal/pwm: Adding more configuration options to the PWM peripheral wrapper. Possibility to set pulse with manually, and also mode. The mode indicates whether duty cycle is low and then goes high, or if it is high and then go low. Added new type to describe the two modes.

2017-04-18 20:53:55 +02:00

hal_qspie.c

nrf5/hal: Fixing compile issues in quad SPI driver.

2017-01-23 00:33:27 +01:00

hal_qspie.h

nrf5/hal: Updating hal QSPI header with define guard to filter out usage of undefined structures and names when compiling against non-52840 targets.

2017-01-26 22:10:36 +01:00

hal_rtc.c

nrf5/hal: hal_rtc update. Adding current counter value to period value before setting it in the compare register.

2017-03-06 20:52:09 +01:00

hal_rtc.h

nrf5/hal: Updating hal RTC implementation.

2017-03-06 00:53:21 +01:00

hal_spi.c

nrf5/hal: Line wrapping params in hal_spi.c to make it easier to read.

2017-02-02 23:47:30 +01:00

hal_spi.h

nrf5/hal: Updating SPI hal with full list of SPI interfaces as lookup tables for all devices. Updating init struct to pass Pin instance pointers instead of uint pin number and ports.

2017-01-26 21:24:31 +01:00

hal_spie.c

nrf5/hal: Updating SPI DMA variant with more frequencies, and allowing rx and tx buffers to be NULL.

2017-01-26 22:01:43 +01:00

hal_temp.c

minor documentation and extra tabs removal fixes

2017-02-28 09:34:13 +03:00

hal_temp.h

did required modification to merge the temperature sensore module

2017-02-26 11:14:17 +03:00

hal_time.c

nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).

2016-12-13 20:27:26 +01:00

hal_time.h

nrf5: Adding sleep_us to modutime.c and exposing mp_hal_delay_us in hal/hal_time.h

2017-01-03 21:15:53 +01:00

hal_timer.c

nrf5/modules/machine/timer: If timer is used in combination with SOFT_PWM (implicitly use of ticker.c) guard the Timer1 instance from being instantiated trough python timer module. Also disable implementation of the HAL IRQ handler which is for now explicitly implemented in ticker.c for Timer1.

2017-05-25 00:25:14 +02:00

hal_timer.h

nrf5/hal/timer: Adding start/stop template functions to hal_timer.h/.c

2017-05-08 22:10:02 +02:00

hal_twi.c

nrf5/hal: Adding untested implementation of twi read. Lacking sensors to test with :)

2017-03-04 21:42:36 +01:00

hal_twi.h

nrf5/hal: Adding untested implementation of twi read. Lacking sensors to test with :)

2017-03-04 21:42:36 +01:00

hal_twie.c

nrf5/hal: Updating TWI DMA implementation. Suspend not working on tx. Rx not implemented yet.

2017-01-31 22:36:47 +01:00

hal_uart.c

nrf5/uart: Refactoring UART module and HAL driver

2017-03-10 22:21:19 +01:00

hal_uart.h

nrf5/uart: Refactoring UART module and HAL driver

2017-03-10 22:21:19 +01:00

hal_uarte.c

nrf5/uart: Refactoring UART module and HAL driver

2017-03-10 22:21:19 +01:00

nrf51_hal.h

nrf5/hal: Making nrf51/2_hal.h go trough nrf.h to find bitfields and other mcu headers instead of explicit include.

2017-01-08 16:20:01 +01:00

nrf52_hal.h

nrf5/hal: Making nrf51/2_hal.h go trough nrf.h to find bitfields and other mcu headers instead of explicit include.

2017-01-08 16:20:01 +01:00