Commit Graph

138 Commits

Author SHA1 Message Date
sergiuszm ea426dd9ef stmhal: Add support for STM32 Nucleo64 L476RG. 2016-12-22 17:45:50 +11:00
Damien George e202b6f586 stmhal/sdcard: Use mp_hal_pin_config function instead of HAL_GPIO_Init.
There is a minor functional change with this patch, that the GPIO are now
configured in fast mode, whereas they were in high speed mode before.  But
the SDIO should still work because SD CK frequency is at most 25MHz.
2016-12-22 14:55:26 +11:00
Damien George 0f408bc1ff stmhal: Move PY_SYS_PLATFORM config from board to general config file.
It can be overridden by a board if needed.
2016-12-13 16:26:45 +11:00
Rami Ali 8001918a89 stmhal: Add STM32F769DISC board files.
With minor changes to adc.c and storage.c to support the F769.
2016-12-13 16:26:13 +11:00
Rami Ali e9fbc555fc stmhal: Add NUCLEO_F767ZI board, with openocd config for stm32f7. 2016-12-13 16:25:31 +11:00
Rami Ali db5a4e8f3c stmhal/boards/STM32F7DISC: Define LSE_STARTUP_TIMEOUT.
So it compiles with the latest F7 hal.
2016-12-07 17:31:21 +11:00
Rami Ali 27a503f632 stmhal: Refactor UART configuration to use pin objects.
This follows the pattern of other peripherals (I2C, SPI) to specify the
pins using pin objects instead of a pair of GPIO port and pin number.  It
makes it easier to customise the UART pins for a particular board.
2016-12-05 14:26:41 +11:00
Nicholas Graumann 0d75b0d962 stmhal: Add address parameters to openocd config files.
Also make l4 config the default for STM32L476DISC board.
2016-11-28 15:27:36 +11:00
Nicholas Graumann 50a2966913 stmhal: Add OpenOCD configuration for STM32L4. 2016-11-28 15:27:36 +11:00
Krzysztof Blazewicz 7928b3e347 stmhal/boards: configure all F4 boards to work with new HAL
changes include:
* use single GPIO.BSRR instead of BSRRH and BSRRL
* change HSE_STARTUP_TIMEOUT to 100 ms
* define LSE_STARTUP_TIMEOUT to 5 s
2016-11-16 12:43:27 +01:00
Damien George 7bb0f7b0f6 drivers: Add "from micropython import const" when const is used.
Following best-practice use of the const feature, to make it compatible
with Python.
2016-11-03 12:41:11 +11:00
Damien George b4cc68e4a4 stmhal/led: Refactor LED to use mp_hal_pin_output() init function.
As part of this patch the MICROPY_HW_LED_OTYPE setting is removed because
it is now unused (all boards anyway had this as OUTPUT_PP).
2016-10-18 14:43:05 +11:00
Dave Hylands c08f50bcf7 stmhal: Disable network and usocket for ESPRUINO_PICO 2016-10-06 11:47:45 +11:00
Dave Hylands 7a9c183c20 stmhal: Fix ESPRUINO_PICO by adding ld scripts with correct flash size. 2016-10-05 11:42:50 +11:00
Dave Hylands 1f433c719b stmhal: Fix linker map for STM32L476 chips.
In particular, this makes the L4 .isr_vector section 16K in size so it's
the same as the F4/F7 MCUs.  The patch also moves the L4 filesystem to
the end of flash, which allows for 512K filesystem on the 1Mb devices
like the STM32L476DISC.
2016-10-04 14:31:19 +11:00
Nicholas Graumann 7165fbd8f4 stmhal: Add virtual com port support for STM32L476DISC. 2016-09-27 22:08:55 -05:00
Krzysztof Blazewicz 9310dad15d stmhal: Put common definitions from linker files to common.ld. 2016-09-22 12:03:12 +10:00
Damien George 4874bde104 stmhal/boards: For OLIMEX_E407, enable UART1 and fix I2C1 mapping.
UART1 can be used even if the switch is enabled.  The schematics for this
board make I2C1 available on PB8/PB9, even though it can also be mapped
to PB6/PB7.

See #2396 and #2427.
2016-09-19 13:00:15 +10:00
Damien George 0fd3d8d19f stmhal/boards: Add pllvalues.py script to compute PLL values for sysclk.
The algorithm here should mirror that in the machine.freq() function.
2016-09-14 13:00:27 +10:00
Dave Hylands fedab995ee stmhal: Set STM32F7DISC CPU Frequency to 216 MHz
This set the CPU frequency to 216 MHz (the max) and
leaves the USB Frequency at 48 MHz.

These settings were copied from one of the HAL examples.
2016-09-04 18:14:41 +10:00
Matt Brejza 5af6184e72 stmhal: Make ADC channel 16 available on L4 MCUs. 2016-08-25 13:49:51 +10:00
Damien George dfb8144037 stmhal/boards: Update STM32L476 pin defs to include ADC channels.
This patch introduces proper ADC Pin definitions in stm32l476_af.csv.
Originally provided by @tobbad.
2016-08-11 13:01:57 +10:00
David Siorpaes b67eb20ed0 stmhal: Fix I2C mappings for STM32F429DISC board. 2016-08-04 22:51:53 +10:00
Stefan Hölzl c8332a5463 stmhal: Add board definition files for Olimex STM32-E407. 2016-06-06 10:21:02 +01:00
Damien George 1dc2862a83 stmhal/led: Allow LEDs to be in PWM mode with TIM1 and channels 1-4.
This allows PYBv3 to use PWM for LED(1) and LED(2).
2016-05-13 11:01:21 +01:00
Tobias Badertscher b924f649cd stmhal: Fix clock configuration for STM32L476-discovery; also add I2C2. 2016-05-10 09:20:30 +01:00
Damien George 08d3d5d9ab stmhal: For LIMIFROG board, add early-init function to get to DFU mode. 2016-05-05 17:00:30 +01:00
Tobias Badertscher 770f169e63 stmhal: Add board files for LIMIFROG board. 2016-05-05 17:00:16 +01:00
Tobias Badertscher 0b6e28c999 stmhal: L4: Add board definition files for STM32L476DISC. 2016-04-16 22:11:02 +01:00
Dave Hylands 99fc0d120a stmhal: NUCELO_F401RE cleanup
Added definitions for SPI1, SPI2, and SPI3
Removed USB stuff (that could be removed)
Updated BOARD name defintion
2016-03-13 12:36:39 +00:00
Dave Hylands 00f921ce02 stmhal: Rename STM32F401NUCLEO to NUCLEO_F401RE
This makes the board match the name printed on the board (and
agree with the documentation)
2016-03-13 12:36:39 +00:00
Dave Hylands 031fadd10e stmhal: Add board definition files for NUCLEO_F411RE 2016-03-12 16:16:15 -08:00
Christopher Arndt 9b5e05a7c7 stmhal: Add makefile target and configuration to deploy via OpenOCD. 2016-03-09 23:00:17 +00:00
Ryan Shaw ad725a6661 stmhal: Add support for generic STM32F439 board (non DISCO). 2016-03-09 22:46:41 +00:00
Dave Hylands 484a471f9b stmhal: Fix some typos in stm32f411 files, regarding FS layout and CSV. 2016-03-07 12:42:30 +00:00
Dave Hylands 367c084c4b stmhal: Fix typo in stm32f401.ld file, regarding flash size. 2016-03-07 12:38:57 +00:00
Pavol Rusnak ce3beb1672 stmhal: Unify comments in stm32f4xx_hal_conf.h across all boards.
To make it easier to spot differences.
2016-03-07 11:28:36 +00:00
Dave Hylands ec37239e53 stmhal: Improvements to the STM32F4DISC UART config settings. 2016-02-15 10:11:29 +00:00
Dave Hylands 4b2938a4b0 stmhal: Some NETDUINO_PLUS_2 cleanup
- Put the I2C bus on the corect pins
- Add the appropriate board_init to power the shield
2016-02-15 10:07:27 +00:00
Dave Hylands 32b7e93535 stmhal: NUCLEO 401 - Add definitions for I2C2 and I2C3 2016-02-10 21:26:14 -08:00
Dave Hylands f791e14750 stmhal: CERB40 - Add pins defines for I2C3 2016-02-10 21:25:30 -08:00
Dave Hylands 38ac23c942 stmhal: NUCLEO 401 - Add a bunch of missing pins and reorder the pins
This groups the pins for a port together and puts them in numerical
order. It also adds ARDUINO pin names.
2016-02-10 21:23:45 -08:00
Dave Hylands a888d5ab91 stmhal: Improve NUCLEO-F401RE build, with UART2 as REPL.
This enables MICROPY_HW_HAS_FLASH which got missed.

The HW has UART2 on the 401 connected to the STLINK procesor
which exposes it as USB serial. This connects that up so that
you can get a REPL using the USB serial.
2016-02-10 16:50:05 +00:00
Paul Sokolovsky 97a0846af9 stmhal/diskio: Introduce MICROPY_HW_HAS_FLASH setting.
To allow to reuse stmhal/diskio for ports which don't have flash but have
other storage devices.
2016-02-06 15:07:01 +02:00
Damien George a8a4b01af6 stmhal: Add PWM capability for LED(3) and LED(4) on pyboards.
USB CDC no longer needs TIM3 (which was originally used for LED(4) PWM)
and so TIM3 has been freed for general purpose use by the user.  Hence
LED(4) lost its PWM capabilities.

This patch reinstates the PWM capabilities using a semi-generic piece
of code which allows to configure a timer and PWM channel to use for any
LED.  But the PWM capability is only configured if the LED is set to an
intensity between 1 and 254 (ie only when needed).  In that case the
relevant timer is configured for PWM.  It's up to the user to make sure
the timers are not used if PWM is active.

This patch also makes sure that PWM LEDs are turned off using standard
GPIO when calling led.off() or led.intensity(0), instead of just setting
the PWM counter to zero.
2016-01-29 22:44:43 +00:00
Damien George ea89b80ff4 stmhal: Make TIM3 available for use by the user.
TIM3 is no longer used by USB CDC for triggering outgoing data, so we
can now make it available to the user.

PWM fading on LED(4) is now gone, but will be reinstated in a new way.
2016-01-29 22:31:56 +00:00
Carmine Noviello 3d42aa07dd stmhal: Add support for the STM32F401NUCLEO board.
Includes full version of pins.csv file with correct mapping of the Nucleo
STM32F401RE chip (LQFP64 package).
2016-01-27 12:30:36 +00:00
Fabian d0f31ccf33 stmhal: Change PLL configuration for STM32F7DISC.
Changes USB clock from 50MHz to 48MHz which improves USB communication.
2015-12-18 22:16:49 +00:00
Tobias Badertscher c5d8ffef58 stmhal: Extend SPI support to fully support all SPI devices on STM32F429.
This includes SPI4, SPI5 and SPI6.
2015-12-16 00:38:36 +00:00
Damien George f7c4f9a640 stmhal: For SPI config, use HW_SPIx_SCK instead of HW_ENABLE_SPIx.
Previously, SPI was configured by a board defining MICROPY_HW_ENABLE_SPIx
to 0 or 1.  Now, the board should define MICROPY_HW_SPIx_SCK, MISO, MOSI
and NSS.  This makes it the same as how I2C is configured.
2015-12-12 15:02:02 +00:00