djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
16,870 Commits 21 Branches 274 Tags 785 MiB
f9d1d9d114
Commit Graph

995 Commits

Author SHA1 Message Date
Sean Cross
ffaeeda749 nrf: simmel: decrease flash filesystem size 
The flash filesystem must be reduced in order to allow the current
build to fit.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-05-12 09:31:51 +08:00
Sean Cross
f7fcd43516 nrf: simmel: disable SPIM3 
Disable the SPIM3 controller to avoid needing to dedicate 8 kB to
the SPIM3 block.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-05-12 09:31:51 +08:00
Sean Cross
370fc7293a nrf: support disabling SPIM3 
SPIM3 is faster than all other SPI blocks, and is capable of generating
a 32 MHz clock.  However, it cannot be used at the same time as the BLE
radio without dedicating an additional 8 kB of RAM to it.

Therefore, some boards may want to disable this.  Support pre-defining
NRFX_SPIM3_ENABLED on the command line to disable it on some bords.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-05-12 09:31:51 +08:00
Sean Cross
79c055f958 nrf: simmel: enable aesio 
This adds AES support to simmel.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-05-12 09:31:51 +08:00
Sean Cross
235098efb8 nrf: simmel: correct CSn pin 
The CSn pin is pin 6 on bank 1, not bank 0.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-05-12 09:31:51 +08:00
Scott Shawcroft
62b835ad76
Merge pull request #2833 from xiongyihui/pitaya-go 
add nRF52840 based Makerdiary Pitaya Go
 2020-05-11 16:34:27 -07:00
Daniel Pollard
bfa5cd9c13 refactor countio based on feedback 2020-05-05 15:23:38 +10:00
Dan Halbert
b7836aeac6 address review comments 2020-05-04 19:51:08 -04:00
Dan Halbert
bae7a5e433 make translate again 2020-05-04 17:26:59 -04:00
Dan Halbert
d6c6f9f4f0 add PacketBuffer .incoming_ and .outgoing_packet_length 2020-05-04 15:59:45 -04:00
Dan Halbert
4d7e341e44
Merge pull request #2844 from xobs/add-nrf-pca10100 
nrf: add pca10100
 2020-05-04 10:51:01 -04:00
Sean Cross
b128399d1e nrf: simmel: enable CIRCUITPY_USB_HID 
Simmel had USB HID disabled in order to save space.  However, the board
configuration did not set USB_DEVICES, causing it to inherit the default
device bouquet of MSC,CDC,MIDI,HID.  This in turn caused HID to be included
in the USB Configuration Descriptor.

For some reason, this was not a problem in an earlier version of tinyusb or
circuitpython.  However, in the most recent version this has rightfully
caused asserts to appear during configuration.

Re-enable USB_HID for now, as it doesn't add too much in terms of space.
We may disable it again later on if we become pressed for space.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-05-04 15:37:53 +08:00
Sean Cross
cb4fc894d7 nrf: add pca10100 
This is the nRF52833-DK board.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-05-04 15:07:49 +08:00
Yihui Xiong
7dd3ddc06b use Nordic's VID which seems to be allowed 
https://devzone.nordicsemi.com/f/nordic-q-a/50638/usb-pid-for-nrf52840
 2020-05-01 06:10:43 +00:00
Scott Shawcroft
1ca90572f1
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-04-30 13:25:31 -07:00
Scott Shawcroft
74a2d0944a
Merge pull request #2834 from Teknikio/fix/bluebird_pinout 
Update teknikio bluebird pin assignments
 2020-04-30 11:50:02 -07:00
JoeBakalor
36a71560c2 update teknikio bluebird pin assignments 2020-04-30 09:58:27 -04:00
Yihui Xiong
4393a88fb6 add nRF52840 based Makerdiary Pitaya Go 2020-04-30 07:38:20 +00:00
Dan Halbert
241d7e2ae6 change many ifndefs to ?= 2020-04-29 23:31:34 -04:00
Dan Halbert
f3078511a6 further cleanup and bug fixing 2020-04-29 23:18:08 -04:00
Sean Cross
6aac9233db nrf: bluetooth: add s147 v7.0.1 softdevice hexfile 
This was not added as part of the initial v7.0.1 patchset because
.hex files are in this project's .gitignore, and so git ignored it.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-30 10:43:46 +08:00
Dan Halbert
180f5c6a94 Merge remote-tracking branch 'adafruit/master' into ringbuf-fixes 2020-04-29 22:11:22 -04:00
Dan Halbert
3d62f87e29 back to '.packet_size' for compatiblity 2020-04-29 22:10:56 -04:00
Dan Halbert
84cee1ab8d rename and improve PacketBuffer packet length property 2020-04-29 17:49:31 -04:00
Scott Shawcroft
a30ff70b4e
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-04-29 10:51:21 -07:00
Sean Cross
1d0781bf12 nrf: add simmel board 
This adds support for Simmel, an nRF52833-based bluetooth tracking
board designed to aid in pandemic tracing.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-29 11:40:00 +08:00
TG-Techie
b9e494b85a add submodule to TG-Watch02A 2020-04-28 00:03:02 -04:00
TG-Techie
76b466a38a add submodule to TG-Watch02A 2020-04-27 22:49:30 -04:00
Scott Shawcroft
755d404edf
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-04-27 16:45:10 -07:00
Scott Shawcroft
9e4b94f466
Merge pull request #2805 from tannewt/update_tinyusb 
Update tinyusb
 2020-04-26 20:55:36 -07:00
Scott Shawcroft
5c7f6e6211
Remove empty #if and add missing includes. 2020-04-24 11:48:55 -07:00
Dan Halbert
982a755eae
Merge pull request #2801 from simmel-project/nrf-s140-7.0.1 
Add NRF S140 7.0.1
 2020-04-23 21:59:51 -04:00
Sean Cross
689dd61379 nrf: nrf52833: use s140 v7.0.1 
Previously, we were using v6.1.1 which worked, but was unsupported.
v7.0.1 is the first version of s140 that supports the nRF52833.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-22 13:34:11 +08:00
Sean Cross
09bef7b0e1 nrf: bluetooth: add s140 v7.0.1 
This is the first version with official support for nRF52833.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-22 13:33:39 +08:00
Dan Halbert
2f86e31501 fix calculation of nrf firmware size 2020-04-22 00:52:54 -04:00
Dan Halbert
fbc8719fad ringbuf tested 2020-04-21 22:40:12 -04:00
Dan Halbert
77cd93ac2d merge from adafruit 2020-04-21 17:47:51 -04:00
Dan Halbert
38ec3bc574 further ringbuf cleanup 2020-04-21 17:38:20 -04:00
Sean Cross
c04e6d6f52 nrf: bleio: parameterize softradio configuration 
Allow for setting various softradio memory settings as part of a
board in order to support lower-memory configurations.  If a
parameter is unspecified then the previously-defined value is used.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-21 12:29:59 +08:00
Sean Cross
3537ad4059 nrf: mpconfigport: support configuration of various sizes 
Conditionally set variables such as the softdevice RAM size, bootloader
size, and the spi m3 buffer size.  This allows ports to adjust these
values to suit their needs.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-21 12:29:58 +08:00
Sean Cross
33720af0c6 nrf: mpconfigport: subtract config size from firmware size 
The BLE Config area needs to be subtracted from the size of the firmware.
THis is because the firmware is counted by walking backwards from the end
of memory, and the BLE config area is placed lower in memory than the
firmware.  Subtracting the BLE config size ensures the internal flash
filesystem doesn't try to use the firmware as storage.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-21 12:29:57 +08:00
Sean Cross
3ed5b87b8f nrf: add support for nrf52833 
This adds preliminary support for the nRF52833, which is a variant of
the nRF52840 with half the RAM, half the flash, and fewer peripherals.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-21 12:29:56 +08:00
Sean Cross
4ad1cbeea3 nrf: make rgbmatrix and framebufferio optional 
Ports can set CIRCUITPY_RGBMATRIX and CIRCUITPY_FRAMEBUFFERIO to 0
in their .mk file in order to prevent these from being built.  This
is necessary for resource-constrained devices.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-21 10:44:21 +08:00
Sean Cross
066f486b28 nrf: supervisor: support building without BUSIO 
Only initialize i2c, spi, and uart if building with BUSIO.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-21 10:44:20 +08:00
Sean Cross
ac9d336f40 nrf: make neopixel support optional 
Add a conditional around the call to neopixel_write(), allowing us
to build for nrf without neopixel support.

Signed-off-by: Sean Cross <sean@xobs.io>
 2020-04-21 09:56:27 +08:00
Scott Shawcroft
bebf27e733
Merge remote-tracking branch 'adafruit/master' into lower_power 
This isn't perfect and needs a bit more testing.
 2020-04-20 18:25:13 -07:00
Jeff Epler
5fcc6d6286 RGBMatrix: finish renaming from Protomatter 
This gets all the purely internal references.  Some uses of
protomatter/Protomatter/PROTOMATTER remain, as they are references
to symbols in the Protomatter C library itself.
 2020-04-17 18:44:07 -05:00
Jeff Epler
3d6258f63d Rename Protomatter -> RGBMatrix 
This is a quick rename, it changes the user-facing names but not the
internal names of things.
 2020-04-17 18:43:57 -05:00
Jeff Epler
a32337718d Rename _protomatter -> protomatter 
I originally believed that there would be a wrapper library around it,
like with _pixelbuf; but this proves not to be the case, as there's
too little for the library to do.
 2020-04-17 18:43:57 -05:00
Scott Shawcroft
7e3d4c61b5
Update TinyUSB and add interrupt hooks. 2020-04-17 14:16:49 -07:00
Scott Shawcroft
b580b34cbf
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-04-14 17:14:44 -07:00
Jeff Epler
1d8a073c05 nrf: protomatter port 2020-04-14 18:24:58 -05:00
Jeff Epler
09dc46a984 Add Protomatter and FramebufferDisplay 2020-04-14 18:24:54 -05:00
Scott Shawcroft
7e69d30c02
Fix nRF PulseIn 2020-04-03 14:22:56 -07:00
Scott Shawcroft
8fe512c7e9
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-03-31 15:13:58 -07:00
Scott Shawcroft
cbe9512691
Merge pull request #2741 from tannewt/fix_packetbuffer_server 
Fix PacketBuffer server support
 2020-03-31 13:39:34 -07:00
Jeff Epler
54e8c63b4f
Merge pull request #2730 from tannewt/fix_fourwire_phase_polarity 
Add polarity and phase to FourWire.
 2020-03-28 07:28:37 -05:00
Scott Shawcroft
798118b74f
Update board.c's to remove remaining tick.h 2020-03-27 14:52:35 -07:00
Scott Shawcroft
b043384949
Update built in display init 2020-03-27 14:35:29 -07:00
siddacious
9e0c00dfd4 adding a backlight polarity flag to Display 2020-03-25 22:51:20 -07:00
siddacious
7bba79363a allowing backlight change 2020-03-25 22:41:23 -07:00
Scott Shawcroft
8a5d3cd6c4
Add exception on small buffer and fix Connecion WRITE handling 2020-03-25 17:41:47 -07:00
Scott Shawcroft
3551b769a2
Fix connection handle tracking in PacketBuffer when a server. 2020-03-25 13:31:18 -07:00
William Moser
c961ed9025 Added 31250 and 56000 to baudrate_map in UART.c, to parallel definitions in nrfx/mdk/nrf*_bitfields.h files 2020-03-24 13:25:02 -04:00
Jeff Epler
d6342af980 ulab: rename enable macro so it appears in the support matrix 2020-03-17 09:33:03 -05:00
Scott Shawcroft
76ca13b6ed
Fix SAMD51 pulsein 2020-03-13 17:21:15 -07:00
Scott Shawcroft
48b5f2a384
Initial work on SAMD 2020-03-13 11:16:41 -07:00
Scott Shawcroft
affd3fcc2a
Clear the pending IRQ in the NVIC as well. 2020-03-13 11:16:38 -07:00
Scott Shawcroft
00d5f63e7c
Hopefully fix PulseIn 2020-03-13 11:12:31 -07:00
Scott Shawcroft
ed5cdd7e09
Hopefully fix flash flush and hopefully audio as well. 2020-03-13 11:12:31 -07:00
Scott Shawcroft
418333979a
Fix autoreload, neopixel, monotonic_ns and sleep w/o SD 2020-03-13 11:12:31 -07:00
Scott Shawcroft
6f60afe8c5
First try at lowering the power consumption 2020-03-13 11:12:30 -07:00
Scott Shawcroft
85f44e20cb
Merge pull request #2695 from TG-Techie/master 
Add new TG-Watch02A to the nrf boards directory
 2020-03-13 10:46:48 -07:00
TG-Techie
197dc344af fix requested changes 2020-03-12 02:31:13 -04:00
TG-Techie
b967a2071f changed TG-Watch02A HW_BOARD_NAME 2020-03-10 23:07:25 -04:00
TG-Techie
50b451ae0c add TG-Watch02A board def 2020-03-10 22:40:55 -04:00
TG-Techie
fec84054d9 ah 2020-03-06 15:03:37 -05:00
TG-Techie
7198056bc3
Merge pull request #2 from adafruit/5.0.x 
5.0.x
 2020-03-06 13:57:31 -05:00
Dan Halbert
210c3274e5 Merge remote-tracking branch 'adafruit/master' into assert_pin-and-mp_const_none-cleanup 2020-03-05 17:47:01 -05:00
Jeff Epler
da31acfcc4 Merge remote-tracking branch 'origin/master' into ulab 2020-03-03 20:13:53 -06:00
Dan Halbert
8435935429 update uses of assert_pin_free; remove redundant checks 2020-02-29 15:37:32 -05:00
Dan Halbert
b6206406de new pin validation routines; don't use mp_const_none if NULL will do 2020-02-28 23:43:04 -05:00
Jeff Epler
eef742bf45 oofatfs: Remove _FS_DISK_READ_ALIGNED 
This workaround is no longer needed, so it can be removed.

Closes: #2332
 2020-02-28 10:04:28 -06:00
Jeff Epler
1e6c08fc30 nrf: sqpi_flash: Handle unaligned reads 2020-02-28 10:03:37 -06:00
TG-Techie
527eb2444c added TG-Watch02A pins 2020-02-28 04:11:54 -05:00
TG-Techie
6d4ffc69fd add TG-Watch02A 2020-02-28 02:52:46 -05:00
Jeff Epler
fa3b9eba92 ulab: Incorporate it 2020-02-27 11:03:03 -06:00
ladyada
86e9fd170a move red LED to D13 and make D3 lsm6ds IRQ 2020-02-25 18:00:23 -05:00
Scott Shawcroft
28c7a1e9c3
Fix crash after empty REPL session 
We were trying to reset bluetooth when it was off and then trying
to raise an exception without the heap.
 2020-02-24 16:11:17 -08:00
Dan Halbert
f63b2c0d0c use realloc instead 2020-02-21 17:36:15 -05:00
Dan Halbert
9cf46ec947 put neopixel_write buffer in root pointers 2020-02-21 08:44:25 -05:00
Dan Halbert
23d6a3dc1f merge from upstream 2020-02-20 22:27:16 -05:00
Dan Halbert
634d246910 relicense nrf SPI.c to MIT 2020-02-20 16:00:21 -05:00
Dave Marples
24405cabaf Edits as a result of review 2020-02-19 00:07:01 +00:00
Dave Marples
490a808bf6 Addition of stubs for rs485/CTS/RTS handling on non-implemented chips 2020-02-18 23:16:40 +00:00
Dan Halbert
dc97b0d844 correct chec^Cfor flash erase boundaries 2020-02-13 17:41:05 -05:00
Scott Shawcroft
e97b0cfc61
Merge pull request #2581 from jamesbowman/master 
First draft of eveL, the low-level module of the Gameduino bindings
 2020-02-13 11:21:32 -08:00
Dan Halbert
e00b3269fe use properly-sized SPI transactions 2020-02-12 15:04:19 -05:00
Dan Halbert
2e029d55fc nrf: add SPIM3 support 2020-02-11 19:22:14 -05:00
Drew Fustini
3bf4b42e2e change OH20 badge pin defs to use SWn for buttons 
Rather than use A, B, C and D

Use the buttons according to silkscreen references:
SW1
SW2
SW3
SW4
 2020-02-10 00:49:13 +01:00
Drew Fustini
0a54f88751 add pin defs for buttons on the OHS2020 badge 2020-02-10 00:32:16 +01:00
Dan Halbert
005c4caf8c fix function defs for compiler 2020-02-07 10:32:37 -05:00
Dan Halbert
857d8ab40a improve time.monotonic_ns() accuracy from ms to us 2020-02-07 10:02:50 -05:00
Dan Halbert
a63f49cb83
Merge pull request #2592 from tannewt/add_extra_ble_error 
Add another error message to BLE
 2020-02-05 23:39:17 -05:00
James Bowman
acef93a253 Rename eveL to _eve, EVEL to _EVE 2020-02-05 18:17:58 -08:00
Scott Shawcroft
72a1bdab30
Add another error message for extended advertisements at the same 
time as scan response. The SD can't do it.
 2020-02-05 15:56:17 -08:00
Dan Halbert
b6da2fa173 nrf: fix i2c frequency setting 2020-02-05 11:25:31 -05:00
James Bowman
7fd30e7d20 First draft of eveL, the low-level module of the Gameduino (and BridgeTek EVE) bindings. 
[adafruit/circuitpython#2578]
 2020-02-03 16:46:14 -08:00
Lady Ada
5a29b222eb add bluefruit sense - tested 2020-02-03 13:52:30 -05:00
Michael Welling
64cafe82bc Adjust OHS2020 madctl for default rotation 
Make to go faster I guess.

Signed-off-by: Michael Welling <mwelling@ieee.org>
 2020-02-02 22:14:10 -08:00
Michael Welling
6804b2a7fd Add I2C pin definitions for interoperability with Adafruit libraries 
Signed-off-by: Michael Welling <mwelling@ieee.org>
 2020-02-02 22:13:39 -08:00
Michael Welling
33dcdd7c03 Updates to enable working SPI TFT 
The backlight enable is active low on our board so the driver doesn't like it.
Toggling to GPIO manually for now.

As fixed the improper SPI bus pins definitions and it works!

Signed-off-by: Michael Welling <mwelling@ieee.org>
 2020-02-02 22:13:03 -08:00
Michael Welling
d99c2ffe4f QSPI flash fixes 
We had the pin names swapped on the schematic and a different flash was populated.

Signed-off-by: Michael Welling <mwelling@ieee.org>
 2020-02-02 22:11:12 -08:00
Lady Ada
dc964b346c adjust CLUE madctl so rotation 0 is 'right' 2020-01-31 20:17:39 -05:00
Dan Halbert
be4e681d07 fix UICR check; do not use NULL for no MISO 2020-01-31 18:57:41 -05:00
Dan Halbert
4abd5f1f7b increase max connections from 2 to 5 2020-01-31 14:58:23 -05:00
Dan Halbert
b6358182d3 Update CLUE to Rev C 2020-01-30 15:22:26 -05:00
Scott Shawcroft
298bca3fdd
Merge pull request #2562 from dhalbert/ble-fixes 
nrf: track vm_used_ble better
 2020-01-30 10:33:19 -08:00
Dan Halbert
87f73e2729 track vm_used_ble better 2020-01-30 09:52:06 -05:00
hierophect
898f4e1f72
Merge branch 'master' into stm32-meowbit 2020-01-29 16:32:08 -05:00
Lucian Copeland
100409961a Move board_init to main.c 2020-01-29 16:29:43 -05:00
Wojtek Siudzinski
df5e58fc6e Add support for the Particle Ethernet FeatherWing 2020-01-28 10:53:50 +01:00
Scott Shawcroft
b36b2493bc
Merge pull request #2532 from tannewt/teensy4-dev 
Refine iMX RT memory layout and add three boards
 2020-01-27 14:11:08 -08:00
Lady Ada
f2dfcee042 add missing displayref 2020-01-26 20:10:20 -05:00
Dan Halbert
68f9aee992 reset NeoPixels on CPB on soft reload 2020-01-23 20:16:31 -05:00
Scott Shawcroft
1c39606345
Fix other builds missing new heap bounds functions 2020-01-18 18:06:56 -08:00
Michael Welling
cc77e86408 Update the VID and USB company string 
Signed-off-by: Michael Welling <mwelling@ieee.org>
 2020-01-16 15:43:49 -08:00
Michael Welling
cc03d68984 Fix backlight pin registration 
Signed-off-by: Michael Welling <mwelling@ieee.org>
 2020-01-16 14:53:07 -08:00
Michael Welling
86d454adf3 Initial board support for OHS2020 Badge 
Not tested but builds.

Signed-off-by: Michael Welling <mwelling@ieee.org>
 2020-01-16 13:46:56 -08:00
Scott Shawcroft
8b61333937
Merge pull request #2510 from dhalbert/bonding-nvm 
nrf: Add bonding to BLE pairing support
 2020-01-15 16:11:09 -08:00
Benny Meisels
4bf10a75c7 Add board definition files for AramCon Badge 2019 2020-01-16 00:44:18 +02:00
Dan Halbert
85dc4089b9 address review comments 2020-01-14 17:23:16 -05:00
Dan Halbert
0367ba7495 fix some typos and leftovers 2020-01-13 18:29:34 -05:00
Dan Halbert
2a75196aa3 merge from adafruit/circuitpython 2020-01-13 18:15:32 -05:00
Dan Halbert
4ad004f24e put bonding to-do flags into Connection objects instead of using a heap-allocated queue 2020-01-13 17:52:32 -05:00
Dan Halbert
9e7f8743c2 fix CCCD bonding store; avoid excessive bonding writes 2020-01-12 23:32:51 -05:00
Dan Halbert
346ce3b73b wip: HID bonding works! 2020-01-10 23:55:45 -05:00
Scott Shawcroft
6ea8d8a6c2
Merge pull request #2498 from dhalbert/optional-i2c-pullup-checking 
Make requiring I2C pullups be optional
 2020-01-10 11:42:44 -08:00
Scott Shawcroft
8708d3dc45
Merge pull request #2461 from jepler/urandom-hardfaults 
Urandom hardfaults
 2020-01-10 11:37:59 -08:00
Dan Halbert
9c167af17a wip; redid flash writing to be compatible with SD 2020-01-09 17:40:02 -05:00
Dan Halbert
189f2d5f07 Make requiring I2C pullups be optional 2020-01-09 17:31:50 -05:00
Jeff Epler
1c6efb9e66 os.urandom: remove unneeded sleep 2020-01-08 16:48:17 -06:00
Roy Hooper
1caf6bd8d3 add missing .h file 2020-01-08 15:23:38 -05:00
Roy Hooper
e1c1e32ceb address code review 2020-01-08 15:17:54 -05:00
Roy Hooper
4e040b0152 add reset of heap to board reset for nrf port 2020-01-08 15:15:27 -05:00
Roy Hooper
34c9e00f08 try (re)using the buffer in neopixel_write 2020-01-08 15:14:53 -05:00
Scott Shawcroft
7a94940c89
Replace magic number and add comment. 2020-01-08 11:01:43 -08:00
Scott Shawcroft
d4492aaed0
Merge remote-tracking branch 'adafruit/master' into packet_buffer 2020-01-08 10:44:37 -08:00
Jeff Epler
b3fb024301 nrf: Call into sd as many times as necessary to fill urandom request 
Generating 51200 bytes in one go takes 4.966s, so that's a rate of about
10KiB/s.
 2020-01-08 10:06:55 -06:00
Dan Halbert
8d629a957d
Merge pull request #2367 from iot49/mtime 
fix mtime on file creation
 2020-01-07 17:19:40 -05:00