Commit Graph

1092 Commits

Author SHA1 Message Date
Damien George c3199f5649 extmod/modurandom: Support an argument of bits=0 to getrandbits.
This was changed in CPython 3.9; see https://bugs.python.org/issue40282.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-30 17:05:56 +10:00
Macarthur Inbody 34d4dab683 extmod/modurandom: Add error message when getrandbits has bad value.
The random module's getrandbits() method didn't give a proper error message
when calling it with a value that was outside of the range of 1-32, which
can lead to confusion using this function (which under CPython can accept
numbers larger than 32).  Now instead of simply giving a ValueError it
gives an error message that states that the number of bits is constrained.

Also, since the random module's functions getrandbits() and randint()
differ from CPython, tests have been added to describe these differences.
For getrandbits the relevant documentation is shown and added to the docs.
The same is given for randint method so that the information is more easily
found.

Finally, since the int object lacks the bit_length() method there is a test
for that method also to include within the docs, showing the difference to
CPython.
2021-05-30 16:41:30 +10:00
Damien George 6a127810c0 extmod/moduhashlib: Put hash obj in final state after digest is called.
If digest is called then the hash object is put in a "final" state and
calling update() or digest() again will raise a ValueError (instead of
silently producing the wrong result).

See issue #4119.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-26 21:44:46 +10:00
Damien George 47583d8cbd extmod/moductypes: Fix size and offset calculation for ARRAY of FLOAT32.
uctypes.FLOAT32 has a special value representation and
uctypes_struct_scalar_size() should be used instead of GET_SCALAR_SIZE().

Signed-off-by: Damien George <damien@micropython.org>
2021-05-06 13:11:33 +10:00
Damien George 350a66a863 extmod/moductypes: Replace numbers with macro constants.
Signed-off-by: Damien George <damien@micropython.org>
2021-05-06 12:40:53 +10:00
Damien George 02dc1644b6 extmod/moductypes: Remove double blank lines and debugging printf's.
Signed-off-by: Damien George <damien@micropython.org>
2021-05-06 12:32:09 +10:00
Damien George 4791d290c6 extmod: Remove old comments used for auto-doc generation.
They are no longer used, and the text in the docs is more up to date.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-06 12:27:31 +10:00
Damien George e9e9c76ddf all: Rename mp_keyboard_interrupt to mp_sched_keyboard_interrupt.
To match mp_sched_exception() and mp_sched_schedule().

Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 15:13:43 +10:00
Damien George 342d55529d extmod/uasyncio: Use .errno instead of .args[0] for OSError exceptions.
Signed-off-by: Damien George <damien@micropython.org>
2021-04-23 22:03:46 +10:00
Damien George 212fe7f33e extmod/extmod.cmake: Add support to build btree module with CMake.
Signed-off-by: Damien George <damien@micropython.org>
2021-04-09 13:33:26 +10:00
Jeff Epler 172fb5230a extmod/re1.5: Check and report byte overflow errors in _compilecode.
The generated regex code is limited in the range of jumps and counts, and
this commit checks all cases which can overflow given the right kind of
input regex, and returns an error in such a case.

This change assumes that the results that overflow an int8_t do not
overflow a platform int.

Closes: #7078

Signed-off-by: Jeff Epler <jepler@gmail.com>
2021-04-06 13:36:42 +10:00
Damien George 2b888aa2f3 extmod/modbluetooth: Free temp arrays in gatts register services.
This helps to reduce memory fragmentation, by freeing the heap data as soon
as it is not needed.  It also helps the compiler keeps a reference to the
beginning of both arrays, which need to be traceable by the GC (otherwise
some compilers may optimise this reference to something else).

Signed-off-by: Damien George <damien@micropython.org>
2021-03-16 13:55:45 +11:00
Damien George eccd73a403 extmod/extmod.cmake: Add modonewire.c to MICROPY_SOURCE_EXTMOD list.
Signed-off-by: Damien George <damien@micropython.org>
2021-03-14 15:51:28 +11:00
Jim Mussared a76604afba extmod/modbluetooth: Separate enabling of "client" from "central".
Previously, the MICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE macro
controlled enabling both the central mode and the GATT client
functionality (because usually the two go together).

This commits adds a new MICROPY_PY_BLUETOOTH_ENABLE_GATT_CLIENT
macro that separately enables the GATT client functionality.
This defaults to MICROPY_PY_BLUETOOTH_ENABLE_CENTRAL_MODE.

This also fixes a bug in the NimBLE bindings where a notification
or indication would not be received by a peripheral (acting as client)
as gap_event_cb wasn't handling it. Now both central_gap_event_cb
and peripheral_gap_event_cb share the same common handler for these
events.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-02-19 17:53:43 +11:00
Damien George cf6a015880 extmod/btstack: Use MICROPY_HW_BLE_UART_BAUDRATE for first UART init.
Otherwise the UART may be left in a state at baudrate=0.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-17 16:06:56 +11:00
Thorsten von Eicken 2c1299b007 extmod/modussl: Fix ussl read/recv/send/write errors when non-blocking.
Also fix related problems with socket on esp32, improve docs for
wrap_socket, and add more tests.
2021-02-17 11:50:54 +11:00
Jim Mussared 4005138882 extmod/modbluetooth: Allow NimBLE to use Zephyr static address.
Zephyr controllers can be queried for a static address (computed from the
device ID).  BlueKitchen already supports this, but make them both use the
same macro to enable the feature.
2021-02-17 11:25:02 +11:00
Jim Mussared 236274f08f extmod/nimble/hal/hal_uart: Fix HCI_TRACE format specifiers.
Makes this work consistently on unix and stm32 ports.
2021-02-17 11:24:48 +11:00
Jim Mussared 5e96e89999 extmod/uasyncio: Add ThreadSafeFlag.
This is a MicroPython-extension that allows for code running in IRQ
(hard or soft) or scheduler context to sequence asyncio code.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-02-16 16:35:37 +11:00
Jim Mussared fce0bd1a2a extmod/moduselect: Fix unsigned/signed comparison for timeout!=-1.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-02-16 14:59:19 +11:00
Jim Mussared a1a2815799 extmod/nimble: Ensure handle is set on read error.
On error, the handle is only available on err->att_handle rather than
in attr->handle used in the non-error case.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-02-16 14:57:10 +11:00
Damien George 66098c0985 py,extmod: Add core cmake rule files.
These allow a port to use cmake natively instead of make.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-15 12:48:18 +11:00
Jim Mussared 7ed99544e4 extmod/uasyncio: Add asyncio.current_task().
Matches CPython behavior.

Fixes #6686
2021-02-13 15:11:17 +11:00
Damien George 50615fef89 extmod/btstack: Enable SYNC_EVENTS, PAIRING_BONDING by default.
Synchronous events work on stm32 and unix ports.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-12 12:08:09 +11:00
Damien George 24a8a408a9 extmod/btstack: Add stub functions for passkey, l2cap bindings.
Signed-off-by: Damien George <damien@micropython.org>
2021-02-12 12:07:51 +11:00
Damien George 7535f67dfb extmod/btstack: Add HCI trace debugging option in btstack_hci_uart.
Signed-off-by: Damien George <damien@micropython.org>
2021-02-12 12:07:29 +11:00
Damien George 26b4ef4c46 extmod/vfs_posix_file: Allow closing an already closed file.
Signed-off-by: Damien George <damien@micropython.org>
2021-02-11 22:54:41 +11:00
Jim Mussared 47d02b3104 extmod/nimble: Improve the flow control for l2cap recv path.
If the _IRQ_L2CAP_RECV handler does the actual consumption of the incoming
data (i.e. via l2cap_recvinto), rather than setting a flag for
non-scheduler-context to handle it later, then two things can happen:

- It can starve the VM (i.e. the scheduled task never terminates).  This is
  because calling l2cap_recvinto will empty the rx buffer, which will grant
  more credits to the channel (an HCI command), meaning more data can
  arrive.  This means that the loop in hal_uart.c that keeps reading HCI
  data from the uart and executing NimBLE events as they are created will
  not terminate, preventing other VM code from running.

- There's no flow control (i.e. data will arrive too quickly).  The channel
  shouldn't be given credits until after we return from scheduler context.

It's preferable that no work is done in scheduler/IRQ context.  But to
prevent this being a problem this commit changes l2cap_recvinto so that if
it is called in IRQ context, and the Python handler empties the rx buffer,
then don't grant credits until the Python handler is complete.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-01-30 13:22:40 +11:00
Damien George ec0503bd0c extmod/modonewire: Use pin_od_high/pin_od_low instead of pin_write.
The pin is configured in open-drain mode so these od_high/od_low methods
should be used.

Signed-off-by: Damien George <damien@micropython.org>
2021-01-29 23:57:10 +11:00
Damien George 15ac5a3df9 extmod/modframebuf: Change int to unsigned int in format methods args.
These args are already bounds checked and clipped, and using unsigned ints
can be more efficient.  It also eliminates possible issues and compiler
warnings with shifting of signed integers.

Signed-off-by: Damien George <damien@micropython.org>
2021-01-29 23:57:10 +11:00
Damien George 71ea438561 extmod/vfs: Check block 0 and 1 when auto-detecting littlefs.
The superblock for littlefs is in block 0 and 1, but block 0 may be erased
or partially written, so block 1 must be checked if block 0 does not have a
valid littlefs superblock in it.

Prior to this commit, the mount of a block device which auto-detected the
filysystem type would fail for littlefs if block 0 did not contain a valid
superblock.  That is now fixed.

Signed-off-by: Damien George <damien@micropython.org>
2021-01-29 15:02:55 +11:00
Jim Mussared aa136b4d78 extmod/modbluetooth: Add ble.hci_cmd(ogf, ocf, req, resp) function.
This allows sending arbitrary HCI commands and getting the response.  The
return value of the function is the status of the command.

This is intended for debugging and not to be a part of the public API, and
must be enabled via mpconfigboard.h.  It's currently only implemented for
NimBLE bindings.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-01-22 18:15:12 +11:00
Jim Mussared f7aafc0628 extmod/nimble: Don't assert on save-IRK failure. 2020-12-23 10:08:00 +11:00
Jim Mussared f42a190247 extmod/nimble: Reset NimBLE BSS in mp_bluetooth_init.
Without this fix, each time service registration happened it would do an
increasingly large malloc() for service state.

See https://github.com/apache/mynewt-nimble/issues/896.
2020-12-23 10:07:49 +11:00
Oliver Joos a13d1b50c9 extmod/vfs: Raise OSError(ENODEV) if mounting bdev without a filesystem.
This commit prevents uos.mount() from raising an AttributeError.
vfs_autodetect() is supposed to return an object that has a "mount" method,
so if no filesystem is found it should raise an OSError(ENODEV) and not
return the bdev itself which has no "mount" method.
2020-12-17 22:44:03 +11:00
Damien George 1719459c28 extmod/modubinascii: Update code, docs for hexlify now CPython has sep.
Since CPython 3.8 the optional "sep" argument to hexlify is officially
supported, so update comments in the code and the docs to reflect this.

Signed-off-by: Damien George <damien@micropython.org>
2020-12-14 14:35:29 +11:00
Jim Mussared d79b9c6c7c extmod/nimble: Generate and persist a unique IRK.
This provides a workaround for
https://github.com/apache/mynewt-nimble/issues/887.

Without this, all devices would share a fixed default IRK.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-12-02 14:44:39 +11:00
Jim Mussared e4f27cbee7 extmod/modbluetooth: Add support for passkey authentication.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-12-02 14:43:32 +11:00
Jim Mussared 4bcbbfdb6c extmod/modbluetooth: Simplify synchronous invoke_irq_handler signature.
Rather than dealing with the different int types, just pass them all as a
single array of mp_int_t with n_unsigned (before addr) and n_signed (after
addr).

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-12-02 14:43:01 +11:00
Jim Mussared c4d08aa4e3 extmod/modbluetooth: Add support for bonding (key persistence).
This adds `_IRQ_GET_SECRET` and `_IRQ_SET_SECRET` events to allow the BT
stack to request the Python code retrive/store/delete secret key data.  The
actual keys and values are opaque to Python and stack-specific.

Only NimBLE is implemented (pending moving btstack to sync events).  The
secret store is designed to be compatible with BlueKitchen's TLV store API.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-12-02 14:41:41 +11:00
Jim Mussared 801e8ffacf extmod/modbluetooth: Add gap_pair(conn_handle) func to intiate pairing.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-12-02 14:41:26 +11:00
Jim Mussared a1fcf30121 extmod/modbluetooth: Allow configuration of pairing/bonding parameters.
This allows setting the security and MITM-protection requirements.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-12-02 14:40:49 +11:00
Andrew Leech 05fef8c6a4 extmod/modbluetooth: Add _IRQ_ENCRYPTION_UPDATE event.
This allows the application to be notified if any of encrypted,
authenticated and bonded state change, as well as the encryption key size.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-12-02 14:40:15 +11:00
Jim Mussared ac89267fef extmod/modbluetooth: Add compile-config flag to enable pairing/bonding.
Enable it on STM32/Unix NimBLE only (pairing/bonding requires synchronous
events and full bindings).

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-12-02 14:39:41 +11:00
Jim Mussared 60830bcba4 extmod/modbluetooth: Allow user-specified reason in read request IRQ.
Instead of returning None/bool from the IRQ, return None/int (where a zero
value means success).  This mirrors how the L2CAP_ACCEPT return value
works.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-12-02 14:37:55 +11:00
Andrew Leech 1697ff335d extmod/modbluetooth: Allow setting char/desc enc/auth options.
This widens the characteristic/descriptor flags to 16-bit, to allow setting
encryption/authentication requirements.

Sets the required flags for NimBLE and btstack implementations.

The BLE.FLAG_* constants will eventually be deprecated in favour of copy
and paste Python constants (like the IRQs).

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-12-02 14:36:50 +11:00
Andrew Leech c70665fb0b extmod/modbluetooth: Add _IRQ_CONNECTION_UPDATE event.
This allows the application to be notified of changes to the connection
interval, connection latency and supervision timeout.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-12-02 14:35:39 +11:00
Jim Mussared f2a9a0ac41 extmod/nimble: Fail read if the characteristic is too big.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-12-02 14:35:17 +11:00
Damien George b505971069 extmod/uasyncio: Fix cancellation handling of wait_for.
This commit switches the roles of the helper task from a cancellation task
to a runner task, to get the correct semantics for cancellation of
wait_for.

Some uasyncio tests are now disabled for the native emitter due to issues
with native code generation of generators and yield-from.

Fixes #5797.

Signed-off-by: Damien George <damien@micropython.org>
2020-12-02 12:31:37 +11:00
Damien George 309dfe39e0 extmod/uasyncio: Add Task.done() method.
This is added because task.coro==None is no longer the way to detect if a
task is finished.  Providing a (CPython compatible) function for this
allows the implementation to be abstracted away.

Signed-off-by: Damien George <damien@micropython.org>
2020-12-02 12:07:06 +11:00
Damien George ca40eb0fda extmod/uasyncio: Delay calling Loop.call_exception_handler by 1 loop.
When a tasks raises an exception which is uncaught, and no other task
await's on that task, then an error message is printed (or a user function
called) via a call to Loop.call_exception_handler.  In CPython this call is
made when the Task object is freed (eg via reference counting) because it's
at that point that it is known that the exception that was raised will
never be handled.

MicroPython does not have reference counting and the current behaviour is
to deal with uncaught exceptions as early as possible, ie as soon as they
terminate the task.  But this can be undesirable because in certain cases
a task can start and raise an exception immediately (before any await is
executed in that task's coro) and before any other task gets a chance to
await on it to catch the exception.

This commit changes the behaviour so that tasks which end due to an
uncaught exception are scheduled one more time for execution, and if they
are not await'ed on by the next scheduling loop, then the exception handler
is called (eg the exception is printed out).

Signed-off-by: Damien George <damien@micropython.org>
2020-12-02 12:07:06 +11:00
Jim Mussared 5a7027915c extmod/nimble/modbluetooth_nimble: Fix build when l2cap unavailable.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-11-24 11:57:29 +11:00
Jim Mussared 0e8af2b370 extmod/modbluetooth: Add API for L2CAP channels.
Also known as L2CAP "connection oriented channels". This provides a
socket-like data transfer mechanism for BLE.

Currently only implemented for NimBLE on STM32 / Unix.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-11-24 01:07:17 +11:00
Damien George 64180f0742 extmod/machine_i2c: Add init protocol method for generic I2C bindings.
Hardware I2C implementations must provide a .init() protocol method if they
want to support reconfiguration.  Otherwise the default is that i2c.init()
raises an OSError (currently the case for all ports).

mp_machine_soft_i2c_locals_dict is renamed to mp_machine_i2c_locals_dict to
match the generic SPI bindings.

Fixes issue #6623 (where calling .init() on a HW I2C would crash).

Signed-off-by: Damien George <damien@micropython.org>
2020-11-23 19:45:04 +11:00
Jim Mussared 61d1e4b01b extmod/nimble: Make stm32 and unix NimBLE ports use synchronous events.
This changes stm32 from using PENDSV to run NimBLE to use the MicroPython
scheduler instead.  This allows Python BLE callbacks to be invoked directly
(and therefore synchronously) rather than via the ringbuffer.

The NimBLE UART HCI and event processing now happens in a scheduled task
every 128ms.  When RX IRQ idle events arrive, it will also schedule this
task to improve latency.

There is a similar change for the unix port where the background thread now
queues the scheduled task.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-11-13 17:19:05 +11:00
Jim Mussared 81e92d3d6e extmod/modbluetooth: Re-instate optional no-ringbuf modbluetooth.
This requires that the event handlers are called from non-interrupt context
(i.e. the MicroPython scheduler).

This will allow the BLE stack (e.g. NimBLE) to run from the scheduler
rather than an IRQ like PENDSV, and therefore be able to invoke Python
callbacks directly/synchronously.  This allows writing Python BLE handlers
for events that require immediate response such as _IRQ_READ_REQUEST (which
was previous a hard IRQ) and future events relating to pairing/bonding.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-11-13 17:19:05 +11:00
Jim Mussared 6d9fdff8d0 extmod/nimble: Poll startup directly rather than using NimBLE sem.
Using a semaphore (the previous approach) will only run the UART, whereas
for startup we need to also run the event queue.

This change makes it run the full scheduler hook.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-11-13 17:19:05 +11:00
Jim Mussared c398e46b29 extmod/modbluetooth: Combine gattc-data-available callbacks into one.
Instead of having the stack indicate a "start", "data"..., "end", pass
through the data in one callback as an array of chunks of data.

This is because the upcoming non-ringbuffer modbluetooth implementation
cannot buffer the data in the ringbuffer and requires instead a single
callback with all the data, to pass to the Python callback.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-11-13 17:19:05 +11:00
Jim Mussared 3d890e7ab4 extmod/modbluetooth: Make UUID type accessible outside modbluetooth.c.
Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-11-13 17:19:05 +11:00
Arrowana 922f81dfd1 extmod/machine_mem: Only allow integers in machine.memX subscript.
Prior to this change machine.mem32['foo'] (or using any other non-integer
subscript) could result in a fault due to 'foo' being interpreted as an
integer.  And when writing code it's hard to tell if the fault is due to a
bad subscript type, or an integer subscript that specifies an invalid
memory address.

The type of the object used in the subscript is now tested to be an
integer by using mp_obj_get_int_truncated instead of
mp_obj_int_get_truncated.  The performance hit of this change is minimal,
and machine.memX objects are more for convenience than performance (there
are many other ways to read/write memory in a faster way),

Fixes issue #6588.
2020-11-13 11:13:37 +11:00
Damien George bdfb584b29 extmod/moductypes: Fix storing to (U)INT64 arrays on 32-bit archs.
Fixes issue #6583.

Signed-off-by: Damien George <damien@micropython.org>
2020-11-11 22:18:24 +11:00
Jim Mussared b7883ce74c extmod/nimble/nimble.mk: Add -Wno-old-style-declaration.
This is needed since -Wextra was added to the build in
bef412789e

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-11-05 10:14:19 +11:00
Jim Mussared 2ae3c890bd extmod/btstack/btstack.mk: Add -Wimplicit-fallthrough=0.
This is needed since -Wextra was added to the build in
bef412789e

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-11-05 10:13:12 +11:00
Damien George 6f34800884 extmod/modurandom: Support urandom.seed() without an argument.
If a port provides MICROPY_PY_URANDOM_SEED_INIT_FUNC as a source of
randomness then this will be used when urandom.seed() is called without
an argument (or with None as the argument) to seed the pRNG.

Other related changes in this commit:
- mod_urandom___init__ is changed to call seed() without arguments, instead
  of explicitly passing in the result of MICROPY_PY_URANDOM_SEED_INIT_FUNC.
- mod_urandom___init__ will only ever seed the pRNG once (before it could
  seed it again if imported by, eg, random and then urandom).
- The Yasmarang state is moved to the BSS for builds where the state is
  guaranteed to be initialised on import of the (u)random module.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-29 14:15:16 +11:00
Damien George 03a1f94ea1 extmod/vfs_lfs: Support mounting LFS filesystems in read-only mode.
Signed-off-by: Damien George <damien@micropython.org>
2020-10-29 11:43:52 +11:00
Emil Renner Berthing ccd92335a1 py, extmod: Introduce and use MP_FALLTHROUGH macro.
Newer GCC versions are able to warn about switch cases that fall
through.  This is usually a sign of a forgotten break statement, but in
the few cases where a fall through is intended we annotate it with this
macro to avoid the warning.
2020-10-22 11:53:16 +02:00
Emil Renner Berthing dde3db21fc extmod: Disable -Wmissing-field-initializers for lfs2. 2020-10-22 11:47:36 +02:00
Emil Renner Berthing 9aa58cf8ba py, extmod: Add explicit initializers for default values.
When compiling with -Wextra which includes -Wmissing-field-initializers
GCC will warn that the defval field of mp_arg_val_t is not initialized.
This is just a warning as it is defined to be zero initialized, but since
it is a union it makes sense to be explicit about which member we're
going to use, so add the explicit initializers and get rid of the
warning.
2020-10-22 11:47:36 +02:00
Damien George d4b61b0017 extmod/utime_mphal: Add generic utime.time_ns() function.
It requires mp_hal_time_ns() to be provided by a port.  This function
allows very accurate absolute timestamps.

Enabled on unix, windows, stm32, esp8266 and esp32.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 14:20:42 +10:00
Damien George 71f3ade770 ports: Support legacy soft I2C/SPI construction via id=-1 arg.
With a warning that this way of constructing software I2C/SPI is
deprecated.  The check and warning will be removed in a future release.

This should help existing code to migrate to the new SoftI2C/SoftSPI types.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George 9e0533b9e1 extmod/machine_spi: Remove "id" arg in SoftSPI constructor.
The SoftSPI constructor is now used soley to create SoftSPI instances, it
can no longer delegate to create a hardware-based SPI instance.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George aaed33896b extmod/machine_i2c: Remove "id" arg in SoftI2C constructor.
The SoftI2C constructor is now used soley to create SoftI2C instances, it
can no longer delegate to create a hardware-based I2C instance.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Damien George c35deb2625 extmod/machine_i2c: Rename type to SoftI2C and add custom print method.
Also rename machine_i2c_type to mp_machine_soft_i2c_type.  These changes
make it clear that it's a soft-I2C implementation, and match SoftSPI.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-01 12:57:10 +10:00
Andrew Leech 319437d4bd extmod/modure: Allow \\ in re.sub replacements. 2020-09-30 23:18:34 +10:00
Damien George 81f2162ca0 extmod/modbluetooth: Change module-owned bytes objects to memoryview.
A read-only memoryview object is a better representation of the data, which
is owned by the ubluetooth module and may change between calls to the
user's irq callback function.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-25 12:23:11 +10:00
Damien George 71adf506ce extmod/vfs: Fix lookup of entry in root dir so it fails correctly.
Prior to this commit, uos.chdir('/') followed by uos.stat('noexist') would
succeed that stat even though the entry did not exist (some other functions
like listdir would have similar issues).  This is because, if the current
directory was the root and the path was relative, mp_vfs_lookup_path would
return success for bad paths.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-23 16:23:35 +10:00
Damien George 8f20cdc353 all: Rename absolute time-based functions to include "epoch".
For time-based functions that work with absolute time there is the need for
an Epoch, to set the zero-point at which the absolute time starts counting.
Such functions include time.time() and filesystem stat return values.  And
different ports may use a different Epoch.

To make it clearer what functions use the Epoch (whatever it may be), and
make the ports more consistent with their use of the Epoch, this commit
renames all Epoch related functions to include the word "epoch" in their
name (and remove references to "2000").

Along with this rename, the following things have changed:

- mp_hal_time_ns() is now specified to return the number of nanoseconds
  since the Epoch, rather than since 1970 (but since this is an internal
  function it doesn't change anything for the user).

- littlefs timestamps on the esp8266 have been fixed (they were previously
  off by 30 years in nanoseconds).

Otherwise, there is no functional change made by this commit.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-18 17:20:34 +10:00
Jim Mussared 857e2c8fd5 extmod/modbluetooth: Implement MTU. 2020-09-18 12:51:21 +10:00
Jim Mussared 5be3bfcb7e extmod/modbluetooth: Print UUIDs correctly.
In particular, the printed string can now be re-evaluated to construct the
same UUID object.
2020-09-15 15:29:13 +10:00
Jim Mussared 6a6a5f9e15 extmod/modbluetooth: Make BLE.irq() method positional only.
Simplifcation now that the trigger arg has been removed.
2020-09-15 15:28:45 +10:00
Jim Mussared 504522bd02 extmod/modbluetooth: Fix handling of optional data/uuid args.
For the following 3 functions, previously the code relied on whether the
arg was passed at all, to make it optional.  Now it allows them to be
explicitly `None` to indicate they are not used:

- gatts_notify(..., [data])
- gattc_discover_services(..., [uuid])
- gattc_discover_characteristics(..., [uuid])

Also ensure that the uuid arguments are actually instances of the uuid
type, and fix handling of the 5th arg in gattc_discover_characteristics().
2020-09-15 15:23:51 +10:00
Damien George 373b400632 extmod/modussl_axtls: Reduce size of code that makes exception.
Change in code size (for ports that use axtls) is:

   unix x64:  -152 -0.030% [incl -160(data)]
unix nanbox:  -112 -0.025% [incl -96(data)]
    esp8266:   -64 -0.009% GENERIC

Signed-off-by: Damien George <damien@micropython.org>
2020-09-11 10:22:19 +10:00
Jim Mussared 126f972c34 extmod/nimble: Add timeout for HCI sync on startup.
This allows `ble.active(1)` to fail correctly if the HCI controller is
unavailable.

It also avoids an infine loop in the NimBLE event handler where NimBLE
doesn't correctly detect that the HCI controller is unavailable and keeps
trying to reset.

Furthermore, it fixes an issue where GATT service registrations were left
allocated, which led to a bad realloc if the stack was activated multiple
times.
2020-09-08 12:53:24 +10:00
Jim Mussared 99a29ec705 extmod/btstack: Detect HCI UART init failure. 2020-09-08 12:53:24 +10:00
Andrew Leech 8b00aeab8f extmod/btstack: Add btstack support for _IRQ_GATTS_READ_REQUEST. 2020-09-08 12:53:24 +10:00
Jim Mussared 52a2ce45de extmod/modbluetooth: Allow using mp_hal_get_mac as a static address.
Generally a controller should either have its own public address hardcoded,
or loaded by the driver (e.g. cywbt43).

However, for a controller that has no public address where you still want a
long-term stable address, this allows you to use a static address generated
by the port.  Typically on STM32 this will be an LAA, but a board might
override this.
2020-09-08 12:53:24 +10:00
Jim Mussared c4af714d58 extmod/modbluetooth: Implement configuration of address modes.
Changes `BLE.config('mac')` to return a tuple (addr_mode, addr).

Adds `BLE.config(addr_mode=...)` to set the addressing mode.
2020-09-08 12:53:24 +10:00
Jim Mussared 1b1b22905e unix: Implement BLE H4 HCI UART for btstack/nimble.
This commit adds support for using Bluetooth on the unix port via a H4
serial interface (distinct from a USB dongle), with both BTstack and NimBLE
Bluetooth stacks.

Note that MICROPY_PY_BLUETOOTH is now disabled for the coverage variant.
Prior to this commit Bluetooth was anyway not being built on Travis because
libusb was not detected.  But now that bluetooth works in H4 mode it will
be built, and will lead to a large decrease in coverage because Bluetooth
tests cannot be run on Travis.
2020-09-08 12:53:24 +10:00
Jim Mussared aa18ab7db2 extmod/nimble: Implement NimBLE mutex. 2020-09-08 11:41:31 +10:00
Jim Mussared f3f31ac959 extmod/nimble: Make nimble_malloc work with allocated size. 2020-09-08 11:41:31 +10:00
Jim Mussared 5b08676d6a extmod/nimble: Set struct alignment correctly on 64-bit arch. 2020-09-08 11:41:31 +10:00
Jim Mussared ed14435a8e extmod/modbluetooth: Refactor stack/hci/driver/port bindings.
Previously the interaction between the different layers of the Bluetooth
stack was different on each port and each stack.  This commit defines
common interfaces between them and implements them for cyw43, btstack,
nimble, stm32, unix.
2020-09-08 11:41:31 +10:00
Jim Mussared e46aac24ba extmod/modbluetooth: Rename logging macro to be just DEBUG_printf.
And prefix the debug message with "btstack:" or "nimble:", depending on the
context.  Also use correct format specifier for %zu.
2020-09-08 10:48:23 +10:00
stijn 40ad8f1666 all: Rename "sys" module to "usys".
This is consistent with the other 'micro' modules and allows implementing
additional features in Python via e.g. micropython-lib's sys.

Note this is a breaking change (not backwards compatible) for ports which
do not enable weak links, as "import sys" must now be replaced with
"import usys".
2020-09-04 00:10:24 +10:00
Damien George 2a72e90ab8 extmod/vfs: Add option to use 1970 as Epoch.
By setting MICROPY_EPOCH_IS_1970 a port can opt to use 1970/1/1 as the
Epoch for timestamps returned by stat().  And this setting is enabled on
the unix and windows ports because that's what they use.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-01 12:36:28 +10:00
Damien George c70e599659 extmod/vfs: Support larger integer range in VFS stat time fields.
On ports like unix where the Epoch is 1970/1/1 and atime/mtime/ctime are in
seconds since the Epoch, this value will overflow a small-int on 32-bit
systems.  So far this is only an issue on 32-bit unix builds that use the
VFS layer (eg dev and coverage unix variants) but the fix (using
mp_obj_new_int_from_uint instead of MP_OBJ_NEW_SMALL_INT) is there for all
ports so as to not complicate the code, and because they will need the
range one day.

Also apply a similar fix to other fields in VfsPosix.stat because they may
also be large.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-01 12:36:28 +10:00
Damien George d1995e50eb extmod/modlwip: Fix error return for TCP recv when not connected.
This commit fixes the cases when a TCP socket is in STATE_NEW,
STATE_LISTENING or STATE_CONNECTING and recv() is called on it.  It now
raises ENOTCONN instead of a random error code due to it previously
indexing beyond the start of error_lookup_table[].

Signed-off-by: Damien George <damien@micropython.org>
2020-08-30 13:20:51 +10:00
Damien George 06659077a8 all: Update Python code to conform to latest black formatting.
Updating to Black v20.8b1 there are two changes that affect the code in
this repository:

- If there is a trailing comma in a list (eg [], () or function call) then
  that list is now written out with one line per element.  So remove such
  trailing commas where the list should stay on one line.

- Spaces at the start of """ doc strings are removed.

Signed-off-by: Damien George <damien@micropython.org>
2020-08-29 15:18:01 +10:00
Michael Buesch cef678b2db extmod/machine_i2c: Fix buffer overrun if 'addrsize' is bigger than 32.
The memory operation functions read_mem() and write_mem() create a
temporary buffer on the local C stack for the address bytes with the size
of 4 bytes.  This buffer is filled in a loop from the user supplied address
and address length.  If the user supplied 'addrsize' is bigger than 32, the
local buffer is overrun.

Fix this by raising an exception for invalid 'addrsize' values.

Signed-off-by: Michael Buesch <m@bues.ch>
2020-08-27 12:39:11 +10:00
Andrew Leech a80a146858 extmod/bluetooth: Support active scanning in BLE.gap_scan().
This adds an additional optional parameter to gap_scan() to select active
scanning, where scan responses are returned as well as normal scan results.
This parameter is False by default which retains the existing behaviour.
2020-08-26 15:00:11 +10:00
Jim Mussared 0bc2c1c105 extmod/modbluetooth: Fix race between READ_REQUEST and other IRQs.
The READ_REQUEST callback is handled as a hard interrupt (because the BLE
stack needs an immediate response from it so it can continue) and so calls
to Python require extra protection:

- the caller-owned tuple passed into the callback must be separate from the
  tuple used by other callback events (which are soft interrupts);

- the GC and scheduler must be locked during callback execution.
2020-08-26 14:57:36 +10:00
Jim Mussared 3d9a7ed02f extmod/btstack: Implement GAP scan duration_ms parameter.
This commit makes scanning work when duration_ms is set to zero.  Prior to
this it would not work with duration_ms set to zero.
2020-08-26 14:55:52 +10:00
Damien George 2acc087880 extmod/vfs_lfs: Add mtime support to littlefs files.
This commit adds support for modification time of files on littlefs v2
filesystems, using file attributes.  For some background see issue #6114.

Features/properties of this implementation:
- Only supported on littlefs2 (not littlefs1).
- Uses littlefs2's general file attributes to store the timestamp.
- The timestamp is 64-bits and stores nanoseconds since 1970/1/1 (if the
  range to the year 2554 is not enough then additional bits can be added to
  this timestamp by adding another file attribute).
- mtime is enabled by default but can be disabled in the constructor, eg:
  uos.mount(uos.VfsLfs2(bdev, mtime=False), '/flash')
- It's fully backwards compatible, existing littlefs2 filesystems will work
  without reformatting and timestamps will be added transparently to
  existing files (once they are opened for writing).
- Files without timestamps will open correctly, and stat will just return 0
  for their timestamp.
- mtime can be disabled or enabled each mount time and timestamps will only
  be updated if mtime is enabled (otherwise they will be untouched).

Signed-off-by: Damien George <damien@micropython.org>
2020-08-25 17:35:19 +10:00
Damien George 55c76eaac1 extmod/uasyncio: Truncate negative sleeps to 0.
Otherwise a task that continuously awaits on a large negative sleep can
monopolise the scheduler (because its wake time is always less than
everything else in the pairing heap).

Signed-off-by: Damien George <damien@micropython.org>
2020-08-22 12:17:06 +10:00
Damien George 60f5b941e0 extmod/vfs_reader: Fix mp_reader_new_file to open file in "rb" mode.
mp_reader_new_file() is used to read in files for importing, either .py or
.mpy files, for the lexer and persistent code loader respectively.  In both
cases the file should be opened in raw bytes mode: the lexer handles
unicode characters itself, and .mpy files contain 8-bit bytes by nature.

Before this commit importing was working correctly because, although the
file was opened in text mode, all native filesystem implementations (POSIX,
FAT, LFS) would access the file in raw bytes mode via mp_stream_rw()
calling mp_stream_p_t.read().  So it was only an issue for non-native
filesystems, such as those implemented in Python.  For Python-based
filesystem implementations, a call to mp_stream_rw() would go via IOBase
and then to readinto() at the Python level, and readinto() is only defined
on files opened in raw bytes mode.

Signed-off-by: Damien George <damien@micropython.org>
2020-08-12 23:40:50 +10:00
Damien George 441460d81f extmod/uasyncio: Add StreamReader.readexactly(n) method.
It raises on EOFError instead of an IncompleteReadError (which is what
CPython does).  But the latter is derived from EOFError so code compatible
with MicroPython and CPython can be written by catching EOFError (eg see
included test).

Fixes issue #6156.

Signed-off-by: Damien George <damien@micropython.org>
2020-07-25 23:10:05 +10:00
Thorsten von Eicken 5264478007 extmod/modussl_mbedtls: Integrate shorter error strings.
The stm32 and esp32 ports now use shorter error strings for mbedtls errors.
Also, MBEDTLS_ERROR_C is enabled on stm32 by default to get these strings.
2020-07-21 00:31:05 +10:00
Thorsten von Eicken 9aa214077e extmod/modussl: Improve exception error messages.
This commit adds human readable error messages when mbedtls or axtls raise
an exception.  Currently often just an EIO error is raised so the user is
lost and can't tell whether it's a cert error, buffer overrun, connecting
to a non-ssl port, etc.  The axtls and mbedtls error raising in the ussl
module is modified to raise:

    OSError(-err_num, "error string")

For axtls a small error table of strings is added and used for the second
argument of the OSErrer.  For mbedtls the code uses mbedtls' built-in
strerror function, and if there is an out of memory condition it just
produces OSError(-err_num).  Producing the error string for mbedtls is
conditional on them being included in the mbedtls build, via
MBEDTLS_ERROR_C.
2020-07-20 23:41:45 +10:00
Jim Mussared 9d823a5d9a extmod/modbluetooth: Add event for "indicate acknowledgement".
This commit adds the IRQ_GATTS_INDICATE_DONE BLE event which will be raised
with the status of gatts_indicate (unlike notify, indications require
acknowledgement).

An example of its use is added to ble_temperature.py, and to the multitests
in ble_characteristic.py.

Implemented for btstack and nimble bindings, tested in both directions
between unix/btstack and pybd/nimble.
2020-07-20 23:26:41 +10:00
Jim Mussared 3c7ca2004c extmod/modbluetooth: Fix so it builds in peripheral-only mode. 2020-07-20 23:25:56 +10:00
Jim Mussared 43ceadac55 extmod/modbluetooth: Ignore unused self_in in ble_gatts_indicate. 2020-07-20 23:25:22 +10:00
Jim Mussared b7698841b2 docs/library: Add gatts_indicate() doc to ubluetooth.rst.
Also clarify behavior of `gatts_notify` and add some TODOs about adding an
event for indication acknowledgement.
2020-07-18 14:34:44 +10:00
Jim Mussared e152d0c197 extmod/btstack: Schedule notify/indicate/write ops for bg completion.
The goal of this commit is to allow using ble.gatts_notify() at any time,
even if the stack is not ready to send the notification right now.  It also
addresses the same issue for ble.gatts_indicate() and ble.gattc_write()
(without response).  In addition this commit fixes the case where the
buffer passed to write-with-response wasn't copied, meaning it could be
modified by the caller, affecting the in-progress write.

The changes are:

- gatts_notify/indicate will now run in the background if the ACL buffer is
  currently full, meaning that notify/indicate can be called at any time.

- gattc_write(mode=0) (no response) will now allow for one outstanding
  write.

- gattc_write(mode=1) (with response) will now copy the buffer so that it
  can't be modified by the caller while the write is in progress.

All four paths also now track the buffer while the operation is in
progress, which prevents the GC free'ing the buffer while it's still
needed.
2020-07-18 14:23:47 +10:00
Thomas Friebel b6146ca1a1 extmod/nimble: Fix attr NULL ptr dereference in ble_gatt_attr_read_cb.
In case of error, NimBLE calls the read callback with attr = NULL.
2020-07-09 22:41:10 +10:00
Damien George 0c77668d11 extmod/vfs_lfs: Fix littlefs bindings to build in nan-box mode.
Signed-off-by: Damien George <damien@micropython.org>
2020-06-25 16:32:48 +10:00
Damien George 7dd480ad55 extmod/moductypes: Use mp_obj_is_dict_or_ordereddict to simplify code.
Signed-off-by: Damien George <damien@micropython.org>
2020-06-24 12:05:00 +10:00
David Lechner 77ed6f69ac tools/uncrustify: Enable more opts to remove space between func and '('.
With only `sp_func_proto_paren = remove` set there are some cases where
uncrustify misses removing a space between the function name and the
opening '('.  This sets all of the related options to `force` as well.
2020-06-19 22:07:32 +10:00
Damien George 026fda605e tools/codeformat.py: Include extmod/{btstack,nimble} in code formatting.
Signed-off-by: Damien George <damien@micropython.org>
2020-06-18 22:20:20 +10:00
jp-96 3705bc418c extmod/modbluetooth: Register default GATT service and fix esp32 init.
This is for the NimBLE bindings, to make sure the default GATT service
appears and that the esp32 initialises NimBLE correctly (it now matches
stm32).
2020-06-10 22:33:29 +10:00
Damien George a4c96fb3b0 extmod/uasyncio: Add asyncio.wait_for_ms function.
Fixes issue #6107.
2020-06-10 22:29:44 +10:00
stijn 51fd6c9777 extmod/ure: Use single function for match/search/sub.
Saves about 500 bytes on unix x64 and enables CPython-conform
usage of passing a re object to these functions.
2020-06-08 09:16:09 +02:00
Jim Mussared 8b7ae4e099 extmod/modbluetooth: Support bigger characteristic values.
The ring buffer previously used a single unsigned byte field to save the
length, meaning that it would overflow for large characteristic value
responses.

With this commit it now use a 16-bit length instead and has code to
explicitly truncate at UINT16_MAX (although this should be impossible to
achieve in practice).
2020-06-05 14:11:46 +10:00
Jim Mussared 1cad63c0bc extmod/modbluetooth: Ensure status=0 always on success.
This commit makes sure that all discovery complete and read/write status
events set the status to zero on success.

The status value will be implementation-dependent on non-success cases.
2020-06-05 14:11:04 +10:00
Jim Mussared c07ea3e4c2 extmod/modbluetooth: Implement read done event.
On btstack there's no status associated with the read result, it comes
through as a separate event.  This allows you to detect read failures or
timeouts.
2020-06-05 14:08:15 +10:00
Jim Mussared 919d640aec extmod/modbluetooth: Allow discovery of svc/char by uuid.
In most situations this is a more efficient way of going straight to the
service and characteristic you need.
2020-06-05 14:08:07 +10:00
Jim Mussared 6a3c89d584 extmod/modbluetooth: Add discover complete events for svc/char/desc.
Without this it's difficult to implement a state machine correctly if the
desired services are not found.
2020-06-05 14:07:52 +10:00
Jim Mussared e6881f0829 extmod/modbluetooth: Make modbluetooth event not a bitfield.
There doesn't appear to be any use for only triggering on specific events,
so it's just easier to number them sequentially.  This makes them smaller
values so they take up only 1 byte in the ringbuf, only 1 byte for the
opcode in the bytecode, and makes room for more events.

Also add a couple of new event types that need to be implemented (to avoid
re-numbering later).

And rename _COMPLETE and _STATUS to _DONE for consistency.

In the future the "trigger" keyword argument can be reinstated by requiring
the user to compute the bitmask, eg:

    ble.irq(handler, 1 << _IRQ_SCAN_RESULT | 1 << _IRQ_SCAN_DONE)
2020-06-05 14:04:20 +10:00
Damien George 22806ed5df extmod/vfs: Retain previous working directory if chdir fails.
Fixes issue #6069.
2020-05-29 23:05:01 +10:00
Damien George 7dffbfd22a extmod/vfs_lfsx: Fix import_stat so it takes into account current dir.
CPython semantics require searching the current directory if the import is
not absolute (when "" is in sys.path).

Fixes issue #6037.
2020-05-15 11:31:32 +10:00
Thomas Friebel 18fb5b4432 extmod/nimble: Make error code mapping default to MP_EIO.
Before this change, any NimBLE error that does not appear in the
ble_hs_err_to_errno_table maps to return code 0, meaning success.  If we
miss adding an error code to the table we end up returning success in case
of failure.

Instead, handle the zero case explicitly and default to MP_EIO.  This
allows removing the now-redundant MP_EIO entries from the mapping.
2020-05-11 22:31:30 +10:00
Damien George 3b6c9119eb extmod/modbluetooth: Add support for changing the GAP device name.
This commit allows the user to set/get the GAP device name used by service
0x1800, characteristic 0x2a00.  The usage is:

    BLE.config(gap_name="myname")
    print(BLE.config("gap_name"))

As part of this change the compile-time setting
MICROPY_PY_BLUETOOTH_DEFAULT_NAME is renamed to
MICROPY_PY_BLUETOOTH_DEFAULT_GAP_NAME to emphasise its link to GAP and this
new "gap_name" config value.  And the default value of this for the NimBLE
bindings is changed from "PYBD" to "MPY NIMBLE" to be more generic.
2020-05-11 21:30:41 +10:00
robert 0f83ef395c extmod/vfs_lfsx: Fix rename to respect cur dir for new path.
If the new name start with '/', cur_dir is not prepened any more, so that
the current working directory is respected.  And extend the test cases for
rename to cover this functionality.
2020-05-08 21:54:04 +10:00
robert d3ea28d04a extmod/vfs_lfsx: Normalize path name in chdir.
This change scans for '.', '..' and multiple '/' and normalizes the new
path name.  If the resulting path does not exist, an error is raised.
Non-existing interim path elements are ignored if they are removed during
normalization.
2020-05-08 21:52:15 +10:00
robert a5ea4b9f3f extmod/vfs_lfsx: Fix path handling in uos.stat() to consider cur dir.
This fixes the bug, that stat(filename) would not consider the current
working directory.  So if e.g. the cwd is "lib", then stat("main.py") would
return the info for "/main.py" instead of "/lib/main.py".
2020-05-08 21:37:51 +10:00
Damien George 73c58150f5 extmod/modbtree: Retain reference to underlying stream so it's not GC'd.
For ports that have a system malloc which is not garbage collected (eg
unix, esp32), the stream object for the DB must be retained separately to
prevent it from being reclaimed by the MicroPython GC (because the
berkeley-db library uses malloc to allocate the DB structure which stores
the only reference to the stream).

Although in some cases the user code will explicitly retain a reference to
the underlying stream because it needs to call close() on it, this is not
always the case, eg in cases where the DB is intended to live forever.

Fixes issue #5940.
2020-05-02 16:08:04 +10:00
Jim Mussared 2e3c42775a unix: Add btstack to the unix submodules list.
But only when bluetooth is enabled, i.e. if building the dev or coverage
variants, and we have libusb available.

Update travis to match, i.e. specify the variant when doing
`make submodules`.
2020-04-29 16:54:12 +10:00
Jim Mussared ebfd9ff2e6 extmod/modbluetooth: Fix sign compare and unused variable warnings. 2020-04-29 16:54:12 +10:00
Jim Mussared 7563d58210 unix: Add support for modbluetooth and BLE using btstack.
This commit adds full support to the unix port for Bluetooth using the
common extmod/modbluetooth Python bindings.  This uses the libusb HCI
transport, which supports many common USB BT adaptors.
2020-04-29 16:45:46 +10:00
Jim Mussared c987adb9e9 extmod/btstack: Implement more robust init/deinit sequencing. 2020-04-29 16:45:46 +10:00
Jim Mussared 8119ec0765 extmod/modbluetooth: Don't hold atomic section during mp_sched_schedule.
Because, for example, on unix the atomic section isn't re-entrant, and
mp_sched_schedule() will try to re-acquire the atomic section.
2020-04-29 16:45:40 +10:00
Jim Mussared 0da47ecc93 stm32/Makefile: Rename SRC_LIB to LIB_SRC_C to match other ports. 2020-04-29 16:38:18 +10:00
Damien George e08ca78f40 py/stream: Remove mp_stream_errno and use system errno instead.
This change is made for two reasons:

1. A 3rd-party library (eg berkeley-db-1.xx, axtls) may use the system
   provided errno for certain errors, and yet MicroPython stream objects
   that it calls will be using the internal mp_stream_errno.  So if the
   library returns an error it is not known whether the corresponding errno
   code is stored in the system errno or mp_stream_errno.  Using the system
   errno in all cases (eg in the mp_stream_posix_XXX wrappers) fixes this
   ambiguity.

2. For systems that have threading the system-provided errno should always
   be used because the errno value is thread-local.

For systems that do not have an errno, the new lib/embed/__errno.c file is
provided.
2020-04-27 23:58:46 +10:00
Jim Mussared 347c8917dc extmod/nimble: Update to work with NimBLE 1.3. 2020-04-27 22:51:10 +10:00
stijn 84fa3312cf all: Format code to add space after C++-style comment start.
Note: the uncrustify configuration is explicitly set to 'add' instead of
'force' in order not to alter the comments which use extra spaces after //
as a means of indenting text for clarity.
2020-04-23 11:24:25 +10:00
stijn 70affd9ba2 all: Fix implicit floating point to integer conversions.
These are found when building with -Wfloat-conversion.
2020-04-18 22:42:24 +10:00
stijn bcf01d1686 all: Fix implicit conversion from double to float.
These are found when building with -Wfloat-conversion.
2020-04-18 22:42:24 +10:00
stijn 0ba68f8a1d all: Fix implicit floating point promotion.
Initially some of these were found building the unix coverage variant on
MacOS because that build uses clang and has -Wdouble-promotion enabled, and
clang performs more vigorous promotion checks than gcc.  Additionally the
codebase has been compiled with clang and msvc (the latter with warning
level 3), and with MICROPY_FLOAT_IMPL_FLOAT to find the rest of the
conversions.

Fixes are implemented either as explicit casts, or by using the correct
type, or by using one of the utility functions to handle floating point
casting; these have been moved from nativeglue.c to the public API.
2020-04-18 22:36:14 +10:00
stijn b909e8b2dd Revert "all: Fix implicit casts of float/double, and signed comparison."
This reverts commit a2110bd3fc.  There's
nothing inherently wrong with it, but upcoming commits will apply similar
fixes in a slightly different way.
2020-04-18 22:36:06 +10:00
Damien George 5f0661b4fe extmod/uasyncio: Change cannot to can't in error message, and test exp.
Follow up to 8e048d2548 which missed these.
2020-04-14 21:51:25 +10:00
Damien George 8e048d2548 all: Clean up error strings to use lowercase and change cannot to can't.
Now that error string compression is supported it's more important to have
consistent error string formatting (eg all lowercase English words,
consistent contractions).  This commit cleans up some of the strings to
make them more consistent.
2020-04-13 22:19:37 +10:00
Damien George db137e70dc extmod/uasyncio: Add Loop.new_event_loop method.
This commit adds Loop.new_event_loop() which is used to reset the singleton
event loop.  This functionality is put here instead of in Loop.close() to
make it possible to write code that is compatible with CPython.
2020-04-13 22:16:52 +10:00
Damien George c5a21a94f8 extmod/modbluetooth: Provide FLAG_WRITE_NO_RESPONSE for characteristics.
This flag is supported and needs to be set if characteristics are write-
without-response.
2020-04-07 13:46:56 +10:00
Damien George 899e89d4c6 extmod/btstack: Pass through SCAN_RSP events.
The latest version of BTstack has a bug fixed so that it correctly
configures scan parameters if they are set right after activating the
stack.  This means that BLE.gap_scan() will correctly set the scanning to
passive and so SCAN_RSP events are not passed through, so we don't need to
explicitly filter them in our bindings.
2020-04-07 13:46:56 +10:00
Jim Mussared def76fe4d9 all: Use MP_ERROR_TEXT for all error messages. 2020-04-05 15:02:06 +10:00
Jim Mussared 1921224272 extmod/modubinascii: Make code private and module self-contained.
This commit makes all functions and function wrappers in modubinascii.c
STATIC and conditional on the MICROPY_PY_UBINASCII setting, which will
exclude the file from qstr/ compressed-string searching when ubinascii is
not enabled.  The now-unused modubinascii.h header file is also removed.

The cc3200 port is updated accordingly to use this module in its entirety
instead of providing its own top-level definition of ubinascii.

This was originally like this because the cc3200 port has its own ubinascii
module which referenced these methods.  The plan appeared to be that the
API might diverge (e.g. hardware crc), but this should be done similar to
I2C/SPI via a port-specific handler, rather than the port having its own
definition of the module.  Having a centralised module definition also
enforces consistency of the API among ports.
2020-04-05 14:13:53 +10:00
Kevin Köck 15f41c2dbf extmod/uasyncio: Add global exception handling methods.
This commit adds support for global exception handling in uasyncio
according to the CPython error handling:
https://docs.python.org/3/library/asyncio-eventloop.html#error-handling-api

This allows a program to receive exceptions from detached tasks and log
them to an appropriate location, instead of them being printed to the REPL.

The implementation preallocates a context dictionary so in case of an
exception there shouldn't be any RAM allocation.

The approach here is compatible with CPython except that in CPython the
exception handler is called once the task that threw an uncaught exception
is freed, whereas in MicroPython the exception handler is called
immediately when the exception is thrown.
2020-04-04 10:37:00 +11:00
Damien George f97b5395ed extmod/uasyncio: Add StreamReader/StreamWriter as aliases of Stream cls.
To be compatible with CPython.  Fixes issue #5847.
2020-04-02 00:51:00 +11:00
Kevin Köck aca19c25d2 extmod/uasyncio: Add error message to Lock.release's RuntimeError.
Otherwise it can be hard to understand what the error is if a blank
RuntimeError is raised.
2020-04-02 00:40:23 +11:00
Damien George b389bc0afa extmod/uasyncio: Implement Loop.stop() to stop the event loop. 2020-04-02 00:14:18 +11:00
Damien George 711dd392d3 extmod/uasyncio: Don't create a Loop instance in get_event_loop().
The event loop is (for now) just a singleton so make it so that Loop
instances are not needed.
2020-04-01 23:56:31 +11:00
David Lechner a2110bd3fc all: Fix implicit casts of float/double, and signed comparison.
These were found by buiding the unix coverage variant on macOS (so clang
compiler).  Mostly, these are fixing implicit cast of float/double to
mp_float_t which is one of those two and one mp_int_t to size_t fix for
good measure.
2020-03-30 12:04:21 +11:00
Damien George 1a3e386c67 all: Remove spaces inside and around parenthesis.
Using new options enabled in the uncrustify configuration.
2020-03-28 23:36:44 +11:00
David Lechner 9418611c8a unix: Implement PEP 475 to retry syscalls failing with EINTR.
https://www.python.org/dev/peps/pep-0475/

This implements something similar to PEP 475 on the unix port, and for the
VfsPosix class.

There are a few differences from the CPython implementation:
- Since we call mp_handle_pending() between any ENITR's, additional
  functions could be called if MICROPY_ENABLE_SCHEDULER is enabled, not
  just signal handlers.
- CPython only handles signal on the main thread, so other threads will
  raise InterruptedError instead of retrying.  On MicroPython,
  mp_handle_pending() will currently raise exceptions on any thread.

A new macro MP_HAL_RETRY_SYSCALL is introduced to reduce duplicated code
and ensure that all instances behave the same.  This will also allow other
ports that use POSIX-like system calls (and use, eg, VfsPosix) to provide
their own implementation if needed.
2020-03-27 14:40:46 +11:00
Damien George 3b68f36175 extmod/uasyncio: Add manifest.py for freezing uasyncio Py files. 2020-03-26 01:25:45 +11:00
Damien George bc009fdd62 extmod/uasyncio: Add optional implementation of core uasyncio in C.
Implements Task and TaskQueue classes in C, using a pairing-heap data
structure.  Using this reduces RAM use of each Task, and improves overall
performance of the uasyncio scheduler.
2020-03-26 01:25:45 +11:00
Damien George 63b9944382 extmod/uasyncio: Add new implementation of uasyncio module.
This commit adds a completely new implementation of the uasyncio module.
The aim of this version (compared to the original one in micropython-lib)
is to be more compatible with CPython's asyncio module, so that one can
more easily write code that runs under both MicroPython and CPython (and
reuse CPython asyncio libraries, follow CPython asyncio tutorials, etc).
Async code is not easy to write and any knowledge users already have from
CPython asyncio should transfer to uasyncio without effort, and vice versa.

The implementation here attempts to provide good compatibility with
CPython's asyncio while still being "micro" enough to run where MicroPython
runs. This follows the general philosophy of MicroPython itself, to make it
feel like Python.

The main change is to use a Task object for each coroutine.  This allows
more flexibility to queue tasks in various places, eg the main run loop,
tasks waiting on events, locks or other tasks.  It no longer requires
pre-allocating a fixed queue size for the main run loop.

A pairing heap is used to queue Tasks.

It's currently implemented in pure Python, separated into components with
lazy importing for optional components.  In the future parts of this
implementation can be moved to C to improve speed and reduce memory usage.
But the aim is to maintain a pure-Python version as a reference version.
2020-03-26 01:25:45 +11:00
David Lechner 58d9a4815d extmod/vfs_posix_file: Include unistd.h to get STD{IN,OUT,ERR}_FILENO. 2020-03-25 00:59:39 +11:00
Damien George 2cdf1d25f5 unix: Remove custom file implementation to use extmod's VFS POSIX one.
The implementation in extmod/vfs_posix_file.c is now equivalent to that in
ports/unix/file.c, so remove the latter and use the former instead.
2020-03-18 21:01:07 +11:00
Damien George 68b1bc2042 extmod/vfs_posix_file: Lock GIL when writing and allow stdio flush.
Also support MP_STREAM_GET_FILENO ioctl.  The stdio flush change was done
previously for the unix port in 3e0b46b9af.
These changes make this POSIX file implementation equivalent to the unix
file implementation.
2020-03-18 21:01:07 +11:00
Damien George ad9a0ec8ab all: Convert exceptions to use mp_raise_XXX helpers in remaining places. 2020-03-18 17:26:19 +11:00
Damien George 8f0778b209 extmod/modlwip: Properly handle non-blocking and timeout on UDP recv.
Fixes UDP non-blocking recv so it returns EAGAIN instead of ETIMEDOUT.
Timeout waiting for incoming data is also improved by replacing 100ms delay
with poll_sockets(), as is done in other parts of this module.

Fixes issue #5759.
2020-03-18 10:51:32 +11:00
Damien George 00267aae0b extmod/modlwip: Fix polling of UDP socket so it doesn't return HUP.
STATE_NEW will return HUP when polled so put active UDP sockets into a new
state which is different to STATE_NEW.

Fixes issue #5758.
2020-03-18 10:49:27 +11:00
Damien George ed848553b4 extmod/vfs: Factor out vfs mount-and-chdir helper from stm32. 2020-03-11 14:24:26 +11:00
Damien George 7bf62562ce extmod/nimble: When getting BLE MAC try public address if random fails.
This is needed for BLE.config('mac') to work on esp32.
2020-03-11 14:02:13 +11:00
Damien George dd0bc26e65 extmod/modbluetooth: Change scan result's "connectable" to "adv_type".
This commit changes the BLE _IRQ_SCAN_RESULT data from:

    addr_type, addr, connectable, rssi, adv_data

to:

    addr_type, addr, adv_type, rssi, adv_data

This allows _IRQ_SCAN_RESULT to handle all scan result types (not just
connectable and non-connectable passive scans), and to distinguish between
them using adv_type which is an integer taking values 0x00-0x04 per the BT
specification.

This is a breaking change to the API, albeit a very minor one: the existing
connectable value was a boolean and True now becomes 0x00, False becomes
0x02.

Documentation is updated and a test added.

Fixes #5738.
2020-03-11 14:00:44 +11:00
Thomas Friebel 41a9f1dec8 extmod/modbluetooth: Unify error handling in remaining places.
Most error handling is done via `bluetooth_handle_errno()` already.
Replace the remaining few manual checks with calls to that function.
2020-03-11 13:01:35 +11:00
Jim Mussared 1937fb22ab extmod/nimble: Clarify active state and check for active in all methods.
This commit ensures that the BLE stack is active before allowing operations
that may otherwise crash if it's not active.  It also clarifies the state
better (adding the "stopping" state) and renames mp_bluetooth_is_enabled to
the more self-explanatory mp_bluetooth_is_active.
2020-03-11 13:01:35 +11:00
Damien George e965363b6b stm32: Refactor Bluetooth HCI RX to be independent of transport layer.
Now all HCI specific code (eg UART vs WB55 internal messaging) is confined
to modbluetooth_hci.c.
2020-03-10 01:53:42 +11:00
Damien George d7259f6b1c extmod/btstack: Implement notifications/indications for GATT clients.
Work done in collaboration with Jim Mussared aka @jimmo.
2020-03-10 01:53:42 +11:00
Damien George 018ce122ca extmod/btstack: Implement scan and gatt client, connect and disconnect.
Work done in collaboration with Jim Mussared aka @jimmo.
2020-03-10 01:53:42 +11:00
Damien George 372e5a280e extmod/btstack: Implement gatts_db for btstack.
Work done in collaboration with Jim Mussared aka @jimmo.
2020-03-10 01:53:42 +11:00
Damien George 86c26db3ff extmod/btstack: Implement service registration.
Work done in collaboration with Jim Mussared aka @jimmo.
2020-03-10 01:53:42 +11:00
Damien George 0674917bc5 extmod/btstack: Implement advertising.
Work done in collaboration with Jim Mussared aka @jimmo.
2020-03-10 01:53:42 +11:00
Damien George fbefcef1df extmod/btstack: Add empty modbluetooth implementation.
Work done in collaboration with Jim Mussared aka @jimmo.
2020-03-10 01:53:42 +11:00
Damien George 0ac06a510a extmod/modbluetooth: Extract out gatts_db functionality from nimble.
For use by other stacks, if they need it.

Work done in collaboration with Jim Mussared aka @jimmo.
2020-03-10 01:53:42 +11:00
Damien George 894c550c86 stm32: Refactor bluetooth stack/hci/driver bindings.
This makes a cleaner separation between the: driver, HCI UART and BT stack.
Also updated the naming to be more consistent (mp_bluetooth_hci_*).

Work done in collaboration with Jim Mussared aka @jimmo.
2020-03-10 01:53:42 +11:00
Damien George c44d52f33e extmod/modbluetooth_nimble: Move nimble specific code, factor nimble.mk.
Move extmod/modbluetooth_nimble.* to extmod/nimble.  And move common
Makefile lines to extmod/nimble/nimble.mk (which was previously only used
by stm32).  This allows (upcoming) btstack to follow a similar structure.

Work done in collaboration with Jim Mussared aka @jimmo.
2020-03-06 12:35:20 +11:00
Damien George 69661f3343 all: Reformat C and Python source code with tools/codeformat.py.
This is run with uncrustify 0.70.1, and black 19.10b0.
2020-02-28 10:33:03 +11:00
Jim Mussared f8449dd092 extmod/modframebuf: Allow blit source to be a subclass of FrameBuffer. 2020-02-21 13:32:48 +11:00
Jim Mussared cddb90e8b0 extmod/modbluetooth_nimble: Fix wrong offset used for descriptor flags. 2020-02-18 16:37:38 +11:00
Jim Mussared 66ac2e1fc0 extmod/modbluetooth.h: Fix typo in comment about registering services. 2020-02-18 16:36:37 +11:00
Thomas Friebel f4726735cf extmod/modbluetooth: Implement config getter for BLE rxbuf size.
Knowing the buffer size can be important, to ensure that valid data will be
received.
2020-02-18 13:37:50 +11:00
Damien George ce39c958ef py: Factor out definition of mp_float_union_t to one location. 2020-02-18 13:04:36 +11:00
Damien George ad7213d3c3 py: Add mp_raise_msg_varg helper and use it where appropriate.
This commit adds mp_raise_msg_varg(type, fmt, ...) as a helper for
nlr_raise(mp_obj_new_exception_msg_varg(type, fmt, ...)).  It makes the
C-level API for raising exceptions more consistent, and reduces code size
on most ports:

   bare-arm:   +28 +0.042%
minimal x86:  +100 +0.067%
   unix x64:   -56 -0.011%
unix nanbox:  -300 -0.068%
      stm32:  -204 -0.054% PYBV10
     cc3200:    +0 +0.000%
    esp8266:   -64 -0.010% GENERIC
      esp32:  -104 -0.007% GENERIC
        nrf:  -136 -0.094% pca10040
       samd:    +0 +0.000% ADAFRUIT_ITSYBITSY_M4_EXPRESS
2020-02-13 11:52:40 +11:00
Damien George 97eca38c4f py: Add mp_raise_type helper macro and use it where appropriate.
This provides a more consistent C-level API to raise exceptions, ie moving
away from nlr_raise towards mp_raise_XXX.  It also reduces code size by a
small amount on some ports.
2020-02-13 11:03:37 +11:00
David Lechner 35f66d38b8 extmod/vfs_posix: Release GIL during system calls.
This releases the GIL during syscalls that could block.
2020-01-26 23:26:14 +11:00
Damien George bfbd94401d py: Make mp_obj_get_type() return a const ptr to mp_obj_type_t.
Most types are in rodata/ROM, and mp_obj_base_t.type is a constant pointer,
so enforce this const-ness throughout the code base.  If a type ever needs
to be modified (eg a user type) then a simple cast can be used.
2020-01-09 11:25:26 +11:00
Yonatan Goldschmidt aca8873bb8 extmod/modbluetooth: Fix func prototype, empty args should be (void).
This fixes a -Wstrict-prototypes error.
2019-12-27 23:57:46 +11:00
Damien George 6f872f81d6 extmod: Fix modbluetooth and modwebrepl to build in nanbox mode. 2019-12-27 22:54:53 +11:00
Damien George d97b40bdaa py: Introduce MP_ROM_FALSE/MP_ROM_TRUE for ROM to refer to bool objects.
This helps to prevent mistakes, and allows easily changing the ROM value of
False/True if needed.
2019-12-27 22:54:20 +11:00
Damien George 09376f0e47 py: Introduce MP_ROM_NONE macro for ROM to refer to None object.
This helps to prevent mistakes, and allows easily changing the ROM value of
None if needed.
2019-12-27 22:51:17 +11:00
Damien George ed2be79b49 extmod/uzlib: Explicitly cast ptr-diff-expr to unsigned.
The struct member "dest" should never be less than "destStart", so their
difference is never negative.  Cast as such to make the comparison
explicitly unsigned, ensuring the compiler produces the correct comparison
instruction, and avoiding any compiler warnings.
2019-12-23 00:07:03 +11:00
Jim Mussared 7ce1e0b1dc extmod/webrepl: Move webrepl scripts to common place and use manifest.
Move webrepl support code from ports/esp8266/modules into extmod/webrepl
(to be alongside extmod/modwebrepl.c), and use frozen manifests to include
it in the build on esp8266 and esp32.

A small modification is made to webrepl.py to make it work on non-ESP
ports, i.e. don't call dupterm_notify if not available.
2019-12-20 12:59:13 +11:00
Damien George ba84453f77 examples/natmod: Add urandom native module example. 2019-12-13 13:33:40 +11:00
Damien George bbeaafd9aa extmod: Add dynamic-runtime guards to btree/framebuf/uheapq/ure/uzlib.
So they can be built as dynamic native modules, as well as existing static
native modules.
2019-12-12 20:15:28 +11:00
Damien George e5acd06ad5 extmod/modbtree: Use mp_printf instead of printf. 2019-12-12 20:15:28 +11:00
Damien George 84958a8fe1 extmod/modbluetooth: Allow setting ringbuf size via BLE.config(rxbuf=).
The size of the event ringbuf was previously fixed to compile-time config
value, but it's necessary to sometimes increase this for applications that
have large characteristic buffers to read, or many events at once.

With this commit the size can be set via BLE.config(rxbuf=512), for
example.  This also resizes the internal event data buffer which sets the
maximum size of incoming data passed to the event handler.
2019-12-05 11:30:35 +11:00
Damien George 7aeafe2ae9 extmod/modbluetooth: Add optional 4th arg to gattc_write for write mode.
This allows the user to explicitly select the behaviour of the write to the
remote peripheral.  This is needed for peripherals that have
characteristics with WRITE_NO_RESPONSE set (instead of normal WRITE).  The
function's signature is now:

    BLE.gattc_write(conn_handle, value_handle, data, mode=0)

mode=0 means write without response, while mode=1 means write with
response.  The latter was the original behaviour so this commit is a change
in behaviour of this method, and one should specify 1 as the 4th argument
to get back the old behaviour.

In the future there could be more modes supported, such as long writes.
2019-12-04 23:23:07 +11:00
Damien George 40cc7ec677 stm32/mpconfigport.h: Use IRQ_PRI_PENDSV to protect bluetooth ringbuf.
The default protection for the BLE ringbuf is to use
MICROPY_BEGIN_ATOMIC_SECTION, which disables all interrupts. On stm32 it
only needs to disable the lowest priority IRQ, pendsv, because that's the
IRQ level at which the BLE stack is driven.
2019-12-04 13:39:22 +11:00
Damien George 8ce69288e9 extmod/modbluetooth: Remove limit on data coming from gattc data input.
This removes the limit on data coming in from a BLE.gattc_read() request,
or a notify with payload (coming in to a central).  In both cases the data
coming in to the BLE callback is now limited only by the available data in
the ringbuf, whereas before it was capped at (default hard coded) 20 bytes.
2019-12-02 23:27:25 +11:00
Damien George d6e051082a extmod/modbluetooth: Simplify how BLE IRQ callback is scheduled.
Instead of enqueue_irq() inspecting the ringbuf to decide whether to
schedule the IRQ callback (if ringbuf is empty), maintain a flag that knows
if the callback is on the schedule queue or not.  This saves about 150
bytes of code (for stm32 builds), and simplifies all uses of enqueue_irq()
and schedule_ringbuf().
2019-12-02 23:25:36 +11:00
Damien George 6b3404f25e extmod/vfs_lfs: Fix bug when passing no args to constructor and mkfs. 2019-11-26 00:08:57 +11:00
Damien George 5634a31a98 extmod/vfs_lfs: Pass flag along to ioctl when init'ing bdev for lfs.
To hint to the block device that the extended block protocol will be used.
2019-11-26 00:07:42 +11:00
Jim Mussared e873d352ad extmod/modbluetooth: Simplify management of pre-allocated event data.
The address, adv payload and uuid fields of the event are pre-allocated by
modbluetooth, and reused in the IRQ handler.  Simplify this and move all
storage into the `mp_obj_bluetooth_ble_t` instance.

This now allows users to hold on to a reference to these instances without
crashes, although they may be overwritten by future events.  If they want
to hold onto the values longer term they need to copy them.
2019-11-25 17:32:10 +11:00
Jim Mussared 438c0dc2a4 extmod/modbluetooh_nimble: Fix UUID conversion for 16 and 32 bit values. 2019-11-25 17:31:59 +11:00
Jim Mussared 2ae755d9e1 extmod/modbluetooth_nimble: Make gap_scan_stop no-op if no scan ongoing.
No need for this to throw an exception if the intent (don't be scanning) is
clear, and avoids a race with the scan duration timeout.
2019-11-25 17:27:40 +11:00
Jim Mussared d19c6d0519 extmod/modbluetooth: Create UUID from bytes and allow comparison ops.
This allows construction of UUID objects from advertising data payloads and
matching against known UUIDs.
2019-11-25 17:20:51 +11:00
Jim Mussared 334ba01c90 extmod/modbluetooth: Prioritise non-scan-result events.
Remove existing scan result events from the ringbuf if the ringbuf is full
and we're trying to enqueue any other event.  This is needed so that events
such as SCAN_COMPLETE are always put on the ringbuf.
2019-11-21 12:04:57 +11:00
Damien George 799b6d1e0c extmod: Consolidate FAT FS config to MICROPY_VFS_FAT across all ports.
This commit removes the Makefile-level MICROPY_FATFS config and moves the
MICROPY_VFS_FAT config to the Makefile level to replace it.  It also moves
the include of the oofatfs source files in the build from each port to a
central place in extmod/extmod.mk.

For a port to enabled VFS FAT support it should now set MICROPY_VFS_FAT=1
at the level of the Makefile.  This will include the relevant oofatfs files
in the build and set MICROPY_VFS_FAT=1 at the C (preprocessor) level.
2019-11-11 11:37:38 +11:00
Damien George 9b27069e2f extmod/vfs: Add autodetect of littlefs filesystem when mounting. 2019-11-06 12:15:34 +11:00
Damien George c13f9f209d all: Convert nlr_raise(mp_obj_new_exception_msg(x)) to mp_raise_msg(x).
This helper function was added a while ago and these are the remaining
cases to convert, to save a bit of code size.
2019-11-05 11:35:45 +11:00
Damien George 2ee9e1a4ed extmod/modbtree: Make FILEVTABLE const to put it in ROM. 2019-11-01 17:25:40 +11:00
Damien George 40ea1915fc extmod/nimble: Factor out stm32-specific HCI UART RX/TX code. 2019-11-01 12:41:37 +11:00
Damien George 78145b98ef extmod/nimble: Remove unneeded nimble_sprintf wrapper function. 2019-11-01 12:15:07 +11:00
Damien George 9dd9f9ff06 extmod/modussl_mbedtls: Check for invalid key/cert data. 2019-10-31 16:22:42 +11:00
Damien George 07ea81fbc5 extmod/modussl_mbedtls: Fix getpeercert to return None if no cert avail. 2019-10-31 13:42:24 +11:00
Damien George 26d8fd2c0a extmod/modlwip: Unconditionally return POLLHUP/POLLERR when polling.
POSIX poll should always return POLLERR and POLLHUP in revents, regardless
of whether they were requested in the input events flags.

See issues #4290 and #5172.
2019-10-31 13:37:51 +11:00
Damien George feaa251674 extmod/modlwip: Make socket poll return POLLNVAL in case of bad file. 2019-10-31 12:54:37 +11:00
Damien George 71401d5065 extmod/modlwip: Unconditionally return POLLHUP when polling new socket.
POSIX poll should always return POLLERR and POLLHUP in revents, regardless
of whether they were requested in the input events flags.

See issues #4290 and #5172.
2019-10-31 12:54:37 +11:00
Damien George 660a61a388 extmod/vfs_lfs: Allow compiling in VfsLfs1 and VfsLfs2 separately.
These classes are enabled via the config options MICROPY_VFS_LFS1 and
MICROPY_VFS_LFS2, which are disabled by default.
2019-10-30 12:08:58 +11:00
Jim Mussared d16a27da51 extmod/modbluetooth: Add gatts_set_buffer.
- Adds an explicit way to set the size of a value's internal buffer,
  replacing `ble.gatts_write(handle, bytes(size))` (although that
  still works).
- Add an "append" mode for values, which means that remote writes
  will append to the buffer.
2019-10-29 23:09:02 +11:00
Damien George 4cf054a130 extmod/vfs: Add MP_BLOCKDEV_IOCTL_BLOCK_ERASE constant. 2019-10-29 14:17:29 +11:00
Damien George cfe1c5abf8 extmod/vfs: Rename BP_IOCTL_xxx constants to MP_BLOCKDEV_IOCTL_xxx.
Also rename SEC_COUNT to BLOCK_COUNT and SEC_SIZE to BLOCK_SIZE.
2019-10-29 14:17:29 +11:00
Damien George a099505420 extmod: Add VFS littlefs bindings.
Both LFS1 and LFS2 are supported at the same time.
2019-10-29 14:17:29 +11:00
Damien George 98beea9ced extmod/vfs_blockdev: Add extended read/write methods.
This commit adds helper functions to call readblocks/writeblocks with a
fourth argument, the byte offset within a block.

Although the mp_vfs_blockdev_t struct has grown here by 2 machine words, in
all current uses of this struct within this repository it still fits within
the same number of GC blocks.
2019-10-29 12:55:34 +11:00
Damien George e1c7b1cb43 extmod/vfs_blockdev: Factor out block device interface code. 2019-10-29 12:55:17 +11:00
Damien George 9aabb6c01b extmod: Factor out block-device struct to make independent of fatfs. 2019-10-29 12:12:37 +11:00
Jim Mussared b02d7e612d extmod/modbluetooth: Rename module to "ubluetooth".
For consistency with "umachine". Now that weak links are enabled
by default for built-in modules, this should be a no-op, but allows
extension of the bluetooth module by user code.

Also move registration of ubluetooth to objmodule rather than
port-specific.
2019-10-22 21:58:05 +11:00
Jim Mussared 2c1f269918 extmod/modbluetooth_nimble: Use `data_alloc` length to truncate writes.
This allows the maximum size of a characteristic/descriptor to be
increased by locally writing to it first.
2019-10-22 14:30:23 +11:00
Jim Mussared f34e16dbc6 extmod/modbluetooth: Persist reference to NimBLE service instances.
NimBLE doesn't actually copy this data, it requires it to stay live.
Only dereference when we register a new set of services.

Fixes #5226

This will allow incrementally adding services in the future, so
rename `reset` to `append` to make it clearer.
2019-10-22 14:30:23 +11:00
Jim Mussared 56fc3edf98 extmod/modbluetooth: Make UUID support the buffer protocol.
Internally change the representation of UUIDs to LE uint8* to simplify this.

This allows UUIDs to be easily used in BLE payloads (such as advertising).

Ref: #5186
2019-10-22 13:54:05 +11:00
Jim Mussared ebf8332104 extmod/re1.5: Support escaping within RE classes.
Fixes issues #3178 and #5220.

Tests are added, including all the cases mentioned in both bugs.
2019-10-18 12:20:32 +11:00
Damien George 8f7f671236 extmod/modbluetooth: In gap_advertise only accept None to stop adv.
To match the docs, and interval=0 may be used in the future to indicate
something else.
2019-10-15 17:29:27 +11:00
Jim Mussared 36502bdfdc extmod/modbluetooth: Make gap_disconnect not raise when disconnected.
Previously it raised OSError(MP_ENOTCONN) if the conn_handle was already
disconnected.  Now it returns True/False.
2019-10-15 17:22:53 +11:00
Jim Mussared 423e67d0a0 extmod/modbluetooth: Improve ringbuf handling.
No need to share the irq_data buffer with addresses.  Split them into two
separate buffers and manage their max length independently.
2019-10-15 17:22:07 +11:00
Jim Mussared cb73103f57 extmod/modbluetooth: Fix order of params to IRQ_GATTS_WRITE event. 2019-10-15 17:22:01 +11:00
Jim Mussared ba16a22991 extmod/modbluetooth: Clear gap_advertise payload when data is empty.
Also fix default adv interval to 500ms.
2019-10-15 17:21:17 +11:00
Jim Mussared 418f12c5f5 extmod/modbluetooth: Increase maximum connections from 1 to 4.
This avoids a confusing ENOMEM raised from gap_advertise if there is
currently an active connection.  This refers to the static connection
buffer pre-allocated by Nimble (nothing to do with MicroPython heap
memory).
2019-10-15 17:20:25 +11:00
Jim Mussared 76f474129e extmod/modbluetooth: Use us instead of ms for advertising interval.
This is to more accurately match the BLE spec, where intervals are
configured in units of channel hop time (625us). When it was
specified in ms, not all "valid" intervals were able to be
specified.

Now that we're also allowing configuration of scan interval, this
commit updates advertising to match.
2019-10-11 13:51:07 +11:00
Jim Mussared b65cc387cd extmod/modbluetooth: Allow config of scan interval/window.
This adds two additional optional kwargs to `gap_scan()`:
  - `interval_us`: How long between scans.
  - `window_us`: How long to scan for during a scan.

The default with NimBLE is a 11.25ms window with a 1.28s interval.

Changing these parameters is important for detecting low-frequency
advertisements (e.g. beacons).

Note: these params are in microseconds, not milliseconds in order
to allow the 625us granularity offered by the spec.
2019-10-11 13:51:07 +11:00