Commit Graph

137 Commits

Author SHA1 Message Date
Dan Halbert c0c809ad4b Fix version skew for bast_pro_mini build 2019-04-09 22:52:53 -04:00
Radomir Dopieralski 8323721232 Stop hard-coding SPI frequency in FourWire
Instead remember and use the frequency, polarity and phase that was
set when the bus was first created.
2019-04-06 15:15:29 +02:00
Radomir Dopieralski cc6fb4595e Reuse existing error message in busio.i2c
Remove a period from the error message, so that the same message as in
SPI and other places in I2C can be re-used.
2019-03-25 01:41:52 +01:00
Lionel Debroux b0c2c3c756 A couple build fixes for mp_float_t = double (MICROPY_FLOAT_IMPL_DOUBLE).
Signed-off-by: Lionel Debroux <lionel_debroux@yahoo.fr>
2019-02-17 11:21:48 +01:00
Dan Halbert 28cfd8a513 CharacteristicBuffer: make it be a stream class; add locking 2019-01-19 19:45:35 -05:00
Scott Shawcroft 747f2cfe26
Add subclass support to displayio.
Also, swap make_news to accept a kwarg map and refine param checking.

Fixes #1237
2019-01-14 17:29:19 -08:00
Dan Halbert b6b5ed9c89 Remove nRF52832 support 2018-12-30 22:49:20 -05:00
Dan Halbert 63cd9209f1 allow KeyboardInterrupt on UART read; fix nrf UART pin claiming; rename feather 52840 UART pins 2018-12-04 15:05:39 -05:00
Dan Halbert 80db2cec99 UART changes: timeout in secs, write bytes, etc. 2018-12-03 12:04:32 -05:00
Scott Shawcroft 9d91111b1b
Move atmel-samd to tinyusb and support nRF flash.
This started while adding USB MIDI support (and descriptor support is
in this change.) When seeing that I'd have to implement the MIDI class
logic twice, once for atmel-samd and once for nrf, I decided to refactor
the USB stack so its shared across ports. This has led to a number of
changes that remove items from the ports folder and move them into
supervisor.

Furthermore, we had external SPI flash support for nrf pending so I
factored out the connection between the usb stack and the flash API as
well. This PR also includes the QSPI support for nRF.
2018-11-08 17:25:30 -08:00
Dan Halbert 21d331c8cc round SPI freq down; check max freq 2018-10-02 21:06:40 -04:00
Dan Halbert aa95526428 nrf: remove error check for SPI baudrate too high; round to nearest baudrate 2018-10-01 18:54:13 -04:00
Dan Halbert bc510e714f merge 3.0.2 to master 2018-09-18 15:38:12 -04:00
Dan Halbert 6a046f55c4 UART fixes and enhancements; default board object fix 2018-09-12 17:19:43 -04:00
Jeff Epler e1b4e9b7c7 UART: Always allocate UART objects in the long-lived pool
Particularly when they have buffers that are written via IRQ or DMA,
UART objects do not relocate gracefully.  If such an object is
relocated to the long-lived pool after its original creation, the
IRQ or DMA will write to an unexpected location within the Python
heap, leading to a variety of symptoms.  The most frequent symptom
is inability to read from the UART.

Consider the particular case of atmel-samd: usart_uart_obj_t
contains a usart_async_descriptor contains a _usart_async_device.
In _sercom_init_irq_param the address of this contained
_usart_async_device is assigned to a global array
sercom_to_sercom_dev which is later used from the interrupt context
_sercom_usart_interrupt_handler to store the received data in the
right ring buffer.

When the UART object is relocated to the long-lived heap, there's no
mechanism to re-point these internal pointers, so instead take the
cowardly way and allocate the UART object as long-lived.

Happily, almost all UART objects are likely to be long-lived, so
this is unlikely to have a negative effect on memory usage or heap
fragmentation.

Closes: #1056
2018-08-08 19:21:57 -05:00
Scott Shawcroft 933add6cd8
Support internationalisation. 2018-08-07 14:58:57 -07:00
Jerry Needell d6c26942a5 add timeout keyword to I2C - for bitbangio - ignored for busio 2018-05-13 21:54:44 -04:00
Scott Shawcroft bf05183158 Merge remote-tracking branch 'adafruit/2.x' into merge_2x 2018-02-27 15:24:16 -08:00
Dan Halbert 9b4477e1dc Implement UART for 3.0 + related fixes.
1. UART: ported to ASF4. Allow rx-only and tx-only. Add .baudrate r/w property.

2. Make NeoPixel timing deterministic by turning off caches during NeoPixel writes.
3. Incorporate asf4 updates:
  a. async USART driver
  b. bringing Atmel START configuration closer to what we use
  c. Clock initialization order now specified by CIRCUITPY_GCLK_INIT_1ST and _LAST.
4. supervisor/port.c: Move commented-out clock-test pin setting to correct location.
2018-02-21 17:18:49 -05:00
Dan Halbert cc87363234 documentation: caution on SPI clock speed for SAMD21 2018-01-30 14:31:20 -05:00
Dan Halbert e550b024c5 atmel-samd: Correct computation of SPI baud rate.
all: Add .frequency read-only property for busio.SPI to return actual frequency.

Fix esp8266/posix_helpers.c, which was not up to date for the new
long-lived/short-lived heap allocation scheme.
2018-01-30 12:08:41 -05:00
Dan Halbert 065e82015f merge from 2.2.0 + fix up board defs 2018-01-02 21:25:41 -05:00
Dan Halbert e75fd0e166 add SPI.write_readinto() - bidirectional SPI 2017-12-05 11:17:16 -08:00
Dan Halbert 312444bbd2 non-DMA SPI working; adding this now for testing; will continue with DMA
Also, fixed pin mappings for rev B Metro M4:
swap PA12 and PA13 on SPI 2x3 header
swap A3 and A5

Comment out all frozen modules in CPX again to make room while waiting
for SPI flash.
2017-11-16 19:09:35 -05:00
Dan Halbert 7292984204 Implement busio.I2c.
* Added asf4_conf/samd*/hpl_sercom_config.h
* Adjusted clocks in peripheral_clk_config.h.
* Put some frozen libs back in CPX for testing.
* Implement common-hal I2C
* Add samd*_peripherals.h in parallel with samd*_pins.h for common
  functions and data.
* Store SERCOM index in pins table for convenience.
* Canonicalize some #include guard names in various .h files.

simpler reset of SERCOMs; remove unused routine
2017-11-07 09:59:54 -08:00
Radomir Dopieralski 78f6c2232c Allow empty reads and writes for busio.SPI
This is mostly for convenience, so that user code doesn't
need to add additional checks.

Also, bring the bitbangio into compatibility with busio wrt. empty
buffers.
2017-11-03 17:33:37 +01:00
Dan Halbert f738996164 Allow writing buffer of length zero to I2C device; it can be used to poll for existence. 2017-10-30 18:32:36 -07:00
Scott Shawcroft bd7abcda97 shared-bindings: Check that I2C and SPI reads and writes are given a buffer of at least 1. (#370)
Fixes #358
2017-10-25 17:28:23 -04:00
Dan Halbert c478c10923 Do not allow a *io object to be used after deinit().
Fixes #278, #277, #276, #275.
2017-10-03 12:07:17 -07:00
Scott Shawcroft 6467e3d40b shared-bindings: Prevent check_lock from being optimized away. (#240)
Fixes #229
2017-09-06 17:49:30 -04:00
Scott Shawcroft aa700a8b42 shared-bindings: Clarify that UART.read() is slow. (#209) 2017-08-29 14:06:59 -04:00
Dan Halbert ef61b5ecb5 Initial merge of micropython v1.9.2 into circuitpython 2.0.0 (in development) master.
cpx build compiles and loads and works in repl; test suite not run yet
esp8266 not tested yet
2017-08-25 22:17:07 -04:00
Scott Shawcroft 30ee7019ca Merge tag 'v1.9.1'
Fixes for stmhal USB mass storage, lwIP bindings and VFS regressions

This release provides an important fix for the USB mass storage device in
the stmhal port by implementing the SCSI SYNCHRONIZE_CACHE command, which
is now require by some Operating Systems.  There are also fixes for the
lwIP bindings to improve non-blocking sockets and error codes.  The VFS has
some regressions fixed including the ability to statvfs the root.

All changes are listed below.

py core:
- modbuiltins: add core-provided version of input() function
- objstr: catch case of negative "maxsplit" arg to str.rsplit()
- persistentcode: allow to compile with complex numbers disabled
- objstr: allow to compile with obj-repr D, and unicode disabled
- modsys: allow to compile with obj-repr D and PY_ATTRTUPLE disabled
- provide mp_decode_uint_skip() to help reduce stack usage
- makeqstrdefs.py: make script run correctly with Python 2.6
- objstringio: if created from immutable object, follow copy on write policy

extmod:
- modlwip: connect: for non-blocking mode, return EINPROGRESS
- modlwip: fix error codes for duplicate calls to connect()
- modlwip: accept: fix error code for non-blocking mode
- vfs: allow to statvfs the root directory
- vfs: allow "buffering" and "encoding" args to VFS's open()
- modframebuf: fix signed/unsigned comparison pendantic warning

lib:
- libm: use isfinite instead of finitef, for C99 compatibility
- utils/interrupt_char: remove support for KBD_EXCEPTION disabled

tests:
- basics/string_rsplit: add tests for negative "maxsplit" argument
- float: convert "sys.exit()" to "raise SystemExit"
- float/builtin_float_minmax: PEP8 fixes
- basics: convert "sys.exit()" to "raise SystemExit"
- convert remaining "sys.exit()" to "raise SystemExit"

unix port:
- convert to use core-provided version of built-in import()
- Makefile: replace references to make with $(MAKE)

windows port:
- convert to use core-provided version of built-in import()

qemu-arm port:
- Makefile: adjust object-file lists to get correct dependencies
- enable micropython.mem_*() functions to allow more tests

stmhal port:
- boards: enable DAC for NUCLEO_F767ZI board
- add support for NUCLEO_F446RE board
- pass USB handler as parameter to allow more than one USB handler
- usb: use local USB handler variable in Start-of-Frame handler
- usb: make state for USB device private to top-level USB driver
- usbdev: for MSC implement SCSI SYNCHRONIZE_CACHE command
- convert from using stmhal's input() to core provided version

cc3200 port:
- convert from using stmhal's input() to core provided version

teensy port:
- convert from using stmhal's input() to core provided version

esp8266 port:
- Makefile: replace references to make with $(MAKE)
- Makefile: add clean-modules target
- convert from using stmhal's input() to core provided version

zephyr port:
- modusocket: getaddrinfo: Fix mp_obj_len() usage
- define MICROPY_PY_SYS_PLATFORM (to "zephyr")
- machine_pin: use native Zephyr types for Zephyr API calls

docs:
- machine.Pin: remove out_value() method
- machine.Pin: add on() and off() methods
- esp8266: consistently replace Pin.high/low methods with .on/off
- esp8266/quickref: polish Pin.on()/off() examples
- network: move confusingly-named cc3200 Server class to its reference
- uos: deconditionalize, remove minor port-specific details
- uos: move cc3200 port legacy VFS mounting functions to its ref doc
- machine: sort machine classes in logical order, not alphabetically
- network: first step to describe standard network class interface

examples:
- embedding: use core-provided KeyboardInterrupt object
2017-06-20 10:56:05 -07:00
Scott Shawcroft 714521a4c7 shared-bindings: Update docs to remove with statements from examples but add more detail to the design guide about their use. 2017-06-07 14:39:12 -07:00
Scott Shawcroft 939c0045db Switch to a shared piece of code to compute start and length of a
buffer from start, end and length. The old code miscomputed length
leading to writing and reading from memory past the end of the buffer.
Consolidating the code should make it easier to get right everywhere.
2017-04-20 11:24:05 -07:00
Scott Shawcroft 4a4f29b8f9 atmel-samd: Rework status LED implementation
* Track status pin use by user code separately so it can take over the pins and then give them back.
* Switch to hardware SPI for APA102 on Gemma and Trinket.
* Merge microcontroller/types.h into microcontroller/Pin.h to better match approach going forwards.
2017-04-12 15:24:50 -07:00
Scott Shawcroft f28f8ba568 Split up nativeio.
This was done to allow greatly granularity when deciding what functionality
is built into each board's build. For example, this way pulseio can be
omitted to allow for something else such as touchio.
2017-04-10 13:32:19 -07:00