Adds support for the BananaPi BPI-PicoW-S3 Boards.
Based on esp32s3 chip.
With one WS2812 LED, one monochrome LED, one ceramic antenna.
Support double-reset to tinyUF2.
Tested with badssl.com:
1. Get client certificates from https://badssl.com/download/
2. Convert public portion with `openssl x509 -in badssl.com-client.pem -out CIRCUITPY/cert.pem`
3. Convert private portion with `openssl rsa -in badssl.com-client.pem -out CIRCUITPY/privkey.pem` and the password `badssl.com`
4. Put wifi settings in CIRCUITPY/.env
5. Run the below Python script:
```py
import os
import wifi
import socketpool
import ssl
import adafruit_requests
TEXT_URL = "https://client.badssl.com/"
wifi.radio.connect(os.getenv('WIFI_SSID'), os.getenv('WIFI_PASSWORD'))
pool = socketpool.SocketPool(wifi.radio)
context = ssl.create_default_context()
requests = adafruit_requests.Session(pool, context)
print(f"Fetching from {TEXT_URL} without certificate (should fail)")
response = requests.get(TEXT_URL)
print(f"{response.status_code=}, should be 400 Bad Request")
input("hit enter to continue\r")
print("Loading client certificate")
context.load_cert_chain("/cert.pem", "privkey.pem")
requests = adafruit_requests.Session(pool, context)
print(f"Fetching from {TEXT_URL} with certificate (should succeed)")
response = requests.get(TEXT_URL)
print(f"{response.status_code=}, should be 200 OK")
```
Note: at this time, the ssl module on pico_w never verifies the server
certificate. This means it does not actually provide a higher security
level than regular socket / http protocols.
Originally, black_bindings found each contiguous "//|" block and sent
it to black independently. This was slower than it needed to be.
Instead, swap the comment prefix: when running black, take off
"//|" prefixes and put "##|" prefixes on all un-prefixed lines.
Then, after black is run, do the opposite operation
This more than doubles the overall speed of "pre-commit run --all",
from 3m20s to 55s CPU time on my local machine (32.5s to under 10s
"elapsed" time)
It also causes a small amount of churn in the bindings, because
black now sees enough context to know whether one 'def' follows another
or ends the 'def's in a 'class'. In the latter case, it adds an extra
newline, which becomes a "//|" line.
I'm less sure why a trailing comma was omitted before down in
rp2pio/StateMachine.c but let's roll with it.
My pings go out, and then they come back
```py
import os
import wifi
import ipaddress
wifi.radio.connect(os.getenv('WIFI_SSID'), os.getenv('WIFI_PASSWORD'))
ipv4 = ipaddress.ip_address("8.8.4.4")
print("Ping google.com: %f ms" % (wifi.radio.ping(ipv4)*1000))
```
Based on esp32s3, all available pins are drawn.
2M PSRAM, 8M FLASH.
A JST SH 4-pin Connector can be used for STEMMA QT / Qwiic.
A MX 1.25mm 2-Pin Connector Lithium battery power supply.
A WS2812 LED.
Adds support for the BananaPi BPI-Bit-S2 Boards.
Based on esp32s2 chip.
With 25 ws2812 LEDs, 1 buzzer, 2 photosensitive sensors, 1 thermosensitive sensor,
2 buttons on the front, 1 reset button and 1 boot button on the back.
Add them as MICROPY_HW_LED_STATUS so that we can share reset code
for them. They aren't actually used for the status if another RGB
option is available. (But maybe they should be.)
Fixes#6717
This allows the web workflow send code to yield briefly when
waiting for more room to send in a socket. Waiting for an "interrupt"
could wait forever because the select task only waits for read and
error. Adding wait on write is tricky because much of the time we
don't care if the sockets are ready to write. Using yield avoids
this trickiness.
We may have set retries to 0 to enforce a timeout but the connect
succeeded. When it succeeds, we want to allow retries later in
case we lose signal briefly. (The callback will do this too but
the connect function will override it after.)
Also, remove extra code from websocket that is leftover from
debugging.
