Commit Graph

22 Commits

Author SHA1 Message Date
roland van straten c9eb7eb449 stm32/stm32_it: Guard UART7_IRQHandler with check for UART7 define.
All STM32 with a UART7 also have a UART8 and vice versa, but this change
improves readability and allows for them to be independent in the future.
2019-03-14 14:02:21 +11:00
Francisco J. Manno f938e70c69 stm32: Add compile-time option to use HSI as clock source.
To use HSI instead of HSE define MICROPY_HW_CLK_USE_HSI as 1 in the board
configuration file.  The default is to use HSE.

HSI has been made the default for the NUCLEO_F401RE board to serve as an
example, and because early revisions of this board need a hardware
modification to get HSE working.
2019-03-05 15:49:08 +11:00
Dave Hylands a270cf280b stm32/stm32_it: Fix RTC IRQ handler to handle all EXTI IRQs on F0 MCUs. 2019-02-19 15:17:47 +11:00
Damien George b178958c07 stm32/pendsv: Clean up pendsv IRQ handler and eliminate duplicate code. 2019-02-08 01:20:13 +11:00
Damien George 1bcf4afb10 stm32/systick: Make periodic systick callbacks use a cyclic func table.
Instead of checking each callback (currently storage and dma) explicitly
for each SysTick IRQ, use a simple circular function table indexed by the
lower bits of the millisecond tick counter.  This allows callbacks to be
easily enabled/disabled at runtime, and scales well to a large number of
callbacks.
2019-02-08 01:20:13 +11:00
Damien George 9dfbb6cc16 stm32/rtc: Get rtc.wakeup working on F0 MCUs.
The problem was that the EXTI line for the RTC wakeup event is line 20 on
the F0, so the interrupt was not firing.
2018-07-31 17:24:10 +10:00
Damien George 37a7257aff stm32/timer: Support TIM1 on F0 MCUs. 2018-06-15 10:50:08 +10:00
Damien George ea7e747979 stm32: Add support for STM32F0 MCUs. 2018-05-28 21:49:49 +10:00
Damien George 070937fe93 stm32: Add support for Cortex-M0 CPUs. 2018-05-28 21:46:20 +10:00
Damien George f497723802 stm32: Allow to have no storage support if there are no block devices.
If no block devices are defined by a board then storage support will be
disabled.  This means there is no filesystem provided by either the
internal flash or external SPI flash.  But the VFS system can still be
enabled and filesystems provided on external devices like an SD card.
2018-05-28 21:45:46 +10:00
Damien George aa4a7a8732 stm32/usb: Guard USB device code with #if for whether USB is enabled.
With this change, all the USB source code can now be passed through the
compiler even if the MCU does not have a USB peripheral.
2018-05-28 21:45:46 +10:00
Ryan Shaw b9ff46f1ed stm32: Enable UART7/8 on F4 series that have these peripherals. 2018-05-16 11:55:07 +10:00
Damien George 88c26a48b4 stm32/pyb_i2c: Put pyb.I2C under MICROPY_PY_PYB_LEGACY setting.
When disabled, the pyb.I2C class saves around 8k of code space and 172
bytes of RAM.  The same functionality is now available in machine.I2C
(for F4 and F7 MCUs).

It is still enabled by default.
2018-05-14 13:53:46 +10:00
Damien George cf9fc7346d stm32: Allow a board to configure the HSE in bypass mode.
To use HSE bypass mode the board should define:

    #define MICROPY_HW_CLK_USE_BYPASS (1)

If this is not defined, or is defined to 0, then HSE oscillator mode is
used.
2018-04-11 16:46:47 +10:00
Damien George 68b70fac5c stm32/stm32_it: Add IRQ handler for I2C4. 2018-04-11 16:37:45 +10:00
Damien George a7ebac2eae stm32/can: Allow CAN pins to be configured per board.
This patch allows a given board to configure which pins are used for the
CAN peripherals, in a similar way to all the other bus peripherals (I2C,
UART, SPI).  To enable CAN on a board the mpconfigboard.h file should
define (for example):

    #define MICROPY_HW_CAN1_TX (pin_B9)
    #define MICROPY_HW_CAN1_RX (pin_B8)
    #define MICROPY_HW_CAN2_TX (pin_B13)
    #define MICROPY_HW_CAN2_RX (pin_B12)

And the board config file should no longer define MICROPY_HW_ENABLE_CAN.
2018-04-11 16:35:24 +10:00
Damien George e37b8ba5a5 stm32: Use STM32xx macros instead of MCU_SERIES_xx to select MCU type.
The CMSIS files for the STM32 range provide macros to distinguish between
the different MCU series: STM32F4, STM32F7, STM32H7, STM32L4, etc.  Prefer
to use these instead of custom ones.
2018-03-17 10:42:50 +11:00
Damien George a25e6c6b65 stm32/can: Add CAN.info() method to retrieve error and tx/rx buf info. 2018-03-16 18:28:35 +11:00
iabdalkader fe29419c10 stm32/stm32_it: Add support for H7 MCUs. 2018-03-09 15:12:01 +11:00
Damien George 5c320bd0b0 stm32: Introduce MICROPY_HW_ENABLE_USB and clean up USB config.
This patch allows to completely compile-out support for USB, and no-USB is
now the default.  If a board wants to enable USB it should define:

    #define MICROPY_HW_ENABLE_USB (1)

And then one or more of the following to select the USB PHY:

    #define MICROPY_HW_USB_FS (1)
    #define MICROPY_HW_USB_HS (1)
    #define MICROPY_HW_USB_HS_IN_FS (1)
2018-02-13 18:51:08 +11:00
Damien George a3dc1b1957 all: Remove inclusion of internal py header files.
Header files that are considered internal to the py core and should not
normally be included directly are:
    py/nlr.h - internal nlr configuration and declarations
    py/bc0.h - contains bytecode macro definitions
    py/runtime0.h - contains basic runtime enums

Instead, the top-level header files to include are one of:
    py/obj.h - includes runtime0.h and defines everything to use the
        mp_obj_t type
    py/runtime.h - includes mpstate.h and hence nlr.h, obj.h, runtime0.h,
        and defines everything to use the general runtime support functions

Additional, specific headers (eg py/objlist.h) can be included if needed.
2017-10-04 12:37:50 +11:00
Damien George 01dd7804b8 ports: Make new ports/ sub-directory and move all ports there.
This is to keep the top-level directory clean, to make it clear what is
core and what is a port, and to allow the repository to grow with new ports
in a sustainable way.
2017-09-06 13:40:51 +10:00