Commit Graph

52 Commits

Author SHA1 Message Date
Dave Hylands 8d62bbd46a Add pyb.hard_reset, and make sys.exit() or raise SystemExit do a soft reset. 2014-10-22 19:14:20 +01:00
Damien George 9b6617ea8b stmhal: Add pyb.stop() and pyb.standby() functions. 2014-10-09 19:02:47 +01:00
Damien George d03c681608 stmhal: Use mp_uint_t where appropriate.
Found these by compiling stmhal with mp_uint_t of type uint32_t instead
of unsigned int.  This actually makes a difference to the code, but just
a curiosity.
2014-10-05 21:51:54 +01:00
Damien George 6dba992182 stmhal: Add config option to disable/enable CAN driver. 2014-10-05 18:05:26 +01:00
Damien George 24119176e7 stmhal: Allow pyb.freq() function to change SYSCLK frequency.
Eg pyb.freq(120000000) sets the CPU to 120MHz.  The frequency can be set
at any point in the code, and can be changed as many times as you like.
Note that any active timers will need to be reconfigured after a freq
change.

Valid range is 24MHz to 168MHz (but not all freqs are supported).  The
code maintains a 48MHz clock for the USB at all times and it's possible
to change the frequency at a USB REPL and keep the REPL alive (well,
most of the time it stays, sometimes it resets the USB for some reason).
Note that USB does not work with pyb.freq of 24MHz.
2014-10-04 01:54:31 +01:00
Damien George 3550de4ebe stmhal: Add basic CAN bus support. 2014-10-02 17:32:02 +01:00
Dave Hylands a21f56b2d5 Added pyb.elapsed_millis and pyb.elapsed_micros
tested using:
stmhal: https://github.com/dhylands/upy-examples/blob/master/elapsed.py
teensy: https://github.com/dhylands/upy-examples/blob/master/teensy/elapsed.py
2014-09-28 11:24:44 -07:00
Damien George 29c92a407c stmhal: Use MP_OBJ_NEW_SMALL_INT directly in pyb.micros/millis.
Also some whitespace cleanup.
2014-08-25 17:38:55 +01:00
Dave Hylands 2bf044442e Add support for pyb.micros() by using the systick timer.
I also removed trailing spaces from modpyb.c which affected a couple
of lines technically not part of this patch.

Tested using: https://github.com/dhylands/upy-examples/blob/master/micros_test.py

which eventually fails due to wraparound issues (I could fix the test to compensate
but didn't bother)
2014-08-25 17:38:55 +01:00
Dave Hylands 9480138f0c Add save/restore_irq
Factored irq functions into a separate file.
2014-08-25 12:22:11 +01:00
Damien George b63be37be1 stmhal: In safe mode, still mount SD card and present as MSD over USB.
It's still "safe" because no scripts are run.  Remove the SD card if you
want to access the internal flash filesystem.  Addresses issue #616.

Also: remove obsolete pyb.source_dir setting, and reset pyb.main and
pyb.usb_mode settings on soft-reset.
2014-08-16 14:23:22 +01:00
Damien George 65dd7bc13d stmhal: Change 0:/ and 1:/ to /flash and /sd; add CWD support.
Some important changes to the way the file system is structured on the
pyboard:

1. 0: and 1: drive names are now replaced with POSIX inspired
directories, namely /flash and /sd.

2. Filesystem now supports the notion of a current working directory.
Supports the standard Python way of manipulating it: os.chdir and
os.getcwd.

3. On boot up, current directory is /flash if no SD inserted, else /sd
if SD inserted.  Then runs boot.py and main.py from the current dir.
This is the same as the old behaviour, but is much more consistent and
flexible (eg you can os.chdir in boot.py to change where main.py is run
from).

4. sys.path (for import) is now set to '' (current dir), plus /flash
and /flash/lib, and then /sd and /sd/lib if SD inserted.  This, along
with CWD, means that import now works properly.  You can import a file
from the current directory.

5. os.listdir is fixed to return just the basename, not the full path.

See issue #537 for background and discussion.
2014-07-31 23:44:04 +01:00
Damien George 3c4db9f91c stmhal: Add USB_VCP class/object, for direct USB VCP control.
Before, pyb.stdin/pyb.stdout allowed some kind of access to the USB VCP
device, but it was basic access.

This patch adds a proper USB_VCP class and object with much more control
over the USB VCP device.  Create an object with pyb.USB_VCP(), then use
this object as if it were a UART object.  It has send, recv, read,
write, and other methods.  send and recv allow a timeout to be specified.

Addresses issue 774.
2014-07-31 10:30:42 +01:00
Damien George 951ed9d02f stmhal: Fix REPL printing by cooking output sent to stdout_obj.
Recent changes to builtin print meant that print was printing to the
mp_sys_stdout_obj, which was sending data raw to the USB CDC device.
The data should be cooked so that \n turns into \r\n.
2014-07-20 13:57:43 +01:00
Damien George 40f3c02682 Rename machine_(u)int_t to mp_(u)int_t.
See discussion in issue #50.
2014-07-03 13:25:24 +01:00
Emmanuel Blot f6932d6506 Prefix ARRAY_SIZE with micropython prefix MP_ 2014-06-19 18:54:34 +02:00
Damien George 2547928148 stmhal: Add Python function to set UART for REPL.
This adds a hook to get/set pyb_uart_global_debug from Python, using
pyb.repl_uart().  You can set it to an arbitrary UART object, and then
the REPL (in and out) is repeated on this UART object (as well as on USB
CDC).

Ultimately, this will be replaced with a proper Pythonic interface to
set sys.stdin and sys.stdout.
2014-06-15 09:47:27 +01:00
Damien George 34ab8dd6dd stmhal: Update and improve LCD driver.
Still some method names to iron out, and funtionality to add, but this
will do for the first, basic version.
2014-06-15 00:41:47 +01:00
Damien George 57b4dfa9c9 stmhal: Fix pyb.bootloader so it works for gcc-4.9.0.
See PR #618.
2014-06-08 14:01:43 +01:00
Damien George 6d197740cf stmhal: Stop USB before entering DFU by software. 2014-05-21 19:25:34 +01:00
Damien George f905ebb173 stmhal: Make pyb.bootloader take no arguments. 2014-05-19 18:26:51 +01:00
Sven Wegener 9bf4f7e3d3 stmhal: Remap system flash and adjust addresses
Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
2014-05-18 13:15:02 +02:00
Sven Wegener 7ae8e4b679 stmhal: Activate bootloader with pyb.bootloader()
Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
2014-05-18 12:51:21 +02:00
Damien George 8c1c7488b2 Add gc.enable, gc.disable; remove pyb.gc. 2014-05-08 23:04:49 +01:00
Paul Sokolovsky 33b3a6905d stmhal: pyb: Use gc() function as defined by standard module "gc".
TODO: Get rid of this compatibility define and rely on standard module.
2014-05-06 02:28:49 +03:00
Damien George 04b9147e15 Add license header to (almost) all files.
Blanket wide to all .c and .h files.  Some files originating from ST are
difficult to deal with (license wise) so it was left out of those.

Also merged modpyb.h, modos.h, modstm.h and modtime.h in stmhal/.
2014-05-03 23:27:38 +01:00
Damien George bff1ff28ee stmhal: Fix bug where negative delay/udelay lead to huge delays.
A negative ms/us is now treated as a delay of 0 ms/us.  This patch also
improves the calibration of udelay.
2014-05-03 14:11:56 +01:00
Damien George 5874c1c92b stmhal: Remove #include <stdint.h> from mpconfigport.h.
Make include dependencies neater, and adheres to the coding convention
that headers should not include headers.
2014-05-03 13:24:21 +01:00
Damien George 8d09640b22 stmhal: Add documentation in comments, and script to generate HTML.
Decided to write own script to pull documentation from comments in C code.
Style for writing auto generated documentation is: start line with ///
and then use standard markdown to write the comment.  Keywords
recognised by the scraper begin with backslash.  See code for examples.

Running: python gendoc.py modpyb.c accel.c adc.c dac.c extint.c i2c.c
led.c pin.c rng.c servo.c spi.c uart.c usrsw.c, will generate a HTML
structure in gendoc-out/.

gendoc.py is crude but functional.  Needed something quick, and this was
it.
2014-04-29 22:55:34 +01:00
Damien George 6d3c5e4301 Add ARRAY_SIZE macro, and use it where possible. 2014-04-26 10:47:29 +01:00
Damien George 6125ba4a7f stmhal: Make switch a class, to follow suit of all other modules.
Instead of pyb.switch() as a function, it's more consistent (with
respect to all the other modules and peripherals) to have
pyb.Switch() create a switch object.  This then generalises to having
multiple switches.  Call the object to get its state.  Use sw.callback
to set the callback function for when the switch is pressed.
2014-04-21 18:23:50 +01:00
Damien George 7fdfa93700 stmhal: Add Timer class: simple TIM control, incl callback on IRQ.
Simple but functional timer control.  More sophistication will
eventually be added, or for now just use direct register access :)

Also added pyb.freq() function to get MCU clock frequencies.
2014-04-21 16:48:16 +01:00
Damien George 7533700393 stmhal: Rename USART to UART.
It's really a UART because there is no external clock line (and hence no
synchronous ability, at least in the implementation of this module).
USART should be reserved for a module that has "S"ynchronous capabilities.

Also, UART is shorter and easier to type :)
2014-04-21 12:03:09 +01:00
Damien George d689430e79 stmhal: Add SPI class.
Also some updates to compile with latest changes to core py.
2014-04-20 00:16:30 +01:00
Damien George 6e44381cce stmhal: Improve RTC class; make fatfs use RTC for time stamping files. 2014-04-19 02:17:30 +01:00
Damien George ed5117f6a8 stmhal: Add pyb.unique_id, to get unique id of MCU. 2014-04-19 01:28:18 +01:00
Damien George 44ee42de50 stmhal: Rename pyb.Led to pyb.LED to conform to naming rules.
It's Light Emitting Diode, so should be LED.
2014-04-19 00:54:33 +01:00
Damien George 8cf08a58a1 stmhal: Remove pyb.input (use sys.stdio.read(1) instead). 2014-04-19 00:50:50 +01:00
Damien George a8f5d15fc6 stmhal: Update help and comments re gpio changing to Pin. 2014-04-18 22:48:59 +01:00
Damien George c66d86c5ce stmhal: Big cleanup; merge gpio into Pin; make names consistent.
This is an attempt to clean up the Micro Python API on the pyboard.
Gpio functionality is now in the Pin object, which seems more natural.
Constants for MODE and PULL are now in pyb.Pin.  Names of some
classes have been adjusted to conform to CamelCase.  Other
miscellaneous changes and clean up here and there.
2014-04-18 22:38:09 +01:00
Damien George f6be480bda stmhal: Add pyb.have_cdc function to check if USB CDC device is enabled. 2014-04-16 15:52:50 +01:00
Damien George 6dba016a56 stmhal: Add pyb.wfi() function (calls __WFI). 2014-04-14 01:45:24 +01:00
Damien George 0aab675108 stmhal: Little hack to dump GC allocation table using pyb.info().
Pass a single parameter (doesn't matter what): pyb.info(1), will dump
the GC alloc table.
2014-04-13 11:10:58 +01:00
Damien George 8b0535e23f py: Change module globals from mp_map_t* to mp_obj_dict_t*.
Towards addressing issue #424.

Had a small increase to ROM usage (order 60 bytes).
2014-04-05 21:53:54 +01:00
Damien George df6567e634 Merge map.h into obj.h.
Pretty much everyone needs to include map.h, since it's such an integral
part of the Micro Python object implementation.  Thus, the definitions
are now in obj.h instead.  map.h is removed.
2014-03-30 13:54:02 +01:00
Damien George 038df43183 stmhal: Implement selector for USB device mode; improve boot up.
Can now choose at boot up whether the USB device is CDC+MSC or CDC+HID.
Choice is made by an option in boot.py, with default being CDC+MSC.
HID+MSC is not currently supported, but should be easy to implement.

Boot up now has ability to change the reset mode: hold down USR switch
while booting and LEDs will count from 1 to 7 to indicate the boot mode.
Release USR when correct mode is selected.  Current modes are 1 (normal
boot), 2 (safe mode), 3 (reset FS mode).
2014-03-30 00:00:15 +00:00
Damien George 64563e39b3 stmhal: Add CDC+HID USB device.
The HID device must appear before the CDC in order for both to work at
the same time.

Whilst the code is working, it's not currently used.
2014-03-29 21:57:30 +00:00
Damien George c9fd6645b0 stmhal: Factor out stdio and readline to separate files.
Adds readline_init() to clear readline history on soft reset.  Addresses
issue #387.
2014-03-29 14:20:05 +00:00
Damien George 38f0c607b0 stmhal: Change Usart creation function to class make_new. 2014-03-25 23:40:54 +00:00
Damien George 3021632501 stmhal: Shuffle around some init functions in main(). 2014-03-25 23:33:47 +00:00