Dan Halbert
6bb47038d5
Merge remote-tracking branch 'adafruit/main' into adcdma
2022-09-15 20:42:51 -04:00
Dan Halbert
0ab4f12dc4
fix some submodules commit skew
2022-09-15 20:36:29 -04:00
Dan Halbert
82694b7265
remove extraneous copyrights
2022-09-15 20:31:08 -04:00
Dan Halbert
4df8a51982
Remove unneeded workaround for Feather ESP32-S2 TFT
2022-09-15 20:06:47 -04:00
Dan Halbert
3abfd212ec
nrf: return None when UART.read() reads nothing
2022-09-15 19:40:02 -04:00
Dan Halbert
60f43b1703
allow preserving pin state during deep sleep
2022-09-15 17:35:14 -04:00
Wind-stormger
56c5f1eedf
Add BananaPi BPI-Leaf-S3.
...
Based on esp32s3, all available pins are drawn.
2M PSRAM, 8M FLASH.
A JST SH 4-pin Connector can be used for STEMMA QT / Qwiic.
A MX 1.25mm 2-Pin Connector Lithium battery power supply.
A WS2812 LED.
2022-09-15 14:18:24 +08:00
Dan Halbert
14fc4a0797
Merge pull request #6898 from dhalbert/espressif-pwmout-reset
...
Espressif pwmout reset fixes
2022-09-14 18:47:05 -04:00
Dan Halbert
ae64f9fd78
Merge pull request #6899 from BPI-STEAM/CircuitPython-main-BPI-BIT-S2-PR
...
Add BananaPi BPI-Bit-S2 .
2022-09-13 23:02:46 -04:00
Wind-stormger
6f4cc611ed
Add BananaPi BPI-Bit-S2 .
...
Adds support for the BananaPi BPI-Bit-S2 Boards.
Based on esp32s2 chip.
With 25 ws2812 LEDs, 1 buzzer, 2 photosensitive sensors, 1 thermosensitive sensor,
2 buttons on the front, 1 reset button and 1 boot button on the back.
2022-09-14 10:21:23 +08:00
Dan Halbert
d2f28eb980
Merge pull request #6887 from RetiredWizard/Broadcom-UART
...
Enable CIRCUITPY_CONSOLE_UART by default on Broadcom boards
2022-09-13 14:35:16 -04:00
Dan Halbert
2b25a5d574
update esp32-camera
2022-09-13 13:16:37 -04:00
Dan Halbert
14adfb16dd
avoid pwmout_reset() workaround by reordering in main(); remove unnecessary never-resets
2022-09-12 21:32:21 -04:00
Dan Halbert
d0d10179c2
fix logic in pwmout_reset()
2022-09-12 17:03:45 -04:00
Kong Wai Weng
c157f1cb39
Cast pin_number to int8_t so that it can be used with switch-case.
2022-09-12 18:56:15 +08:00
Kong Wai Weng
0ae015e4d9
Removed whitespaces.
2022-09-12 18:25:27 +08:00
Kong Wai Weng
aaa2be1200
Set the default pin state for GPIOs to pull down.
2022-09-12 18:19:33 +08:00
microDev
36221bd749
update board microdev_micro_c3
2022-09-11 13:31:38 +05:30
RetiredWizard
14b604f48c
Add LED pin definition to Zero 2W board
2022-09-10 23:18:25 -04:00
RetiredWizard
28756936d5
Add HW_LED_STATUS pin to Zero 2W board
2022-09-10 23:17:02 -04:00
RetiredWizard
38a0ca324e
Uses different pins for RX/TX
2022-09-10 21:48:10 -04:00
RetiredWizard
f4eb618598
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:42:41 -04:00
RetiredWizard
1bdf9fca40
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:40:31 -04:00
RetiredWizard
1d03d73c13
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:39:51 -04:00
RetiredWizard
29e0aba72f
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:39:03 -04:00
RetiredWizard
fb4062d23f
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:38:16 -04:00
RetiredWizard
72c479efe6
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:37:31 -04:00
RetiredWizard
a892af8d77
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:36:41 -04:00
RetiredWizard
7708f19ec8
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:36:01 -04:00
RetiredWizard
0913e3a148
Define CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:34:45 -04:00
RetiredWizard
ecb74aa652
Remove CIRCUITPY_CONSOLE_UART_TX/RX
2022-09-10 21:33:29 -04:00
microDev
8cd4b9fc04
fix espressif run modes
2022-09-10 18:08:09 +05:30
Kong Wai Weng
2fbb3090e2
Changed the pins assignment.
2022-09-09 16:50:14 +08:00
Lee Atkinson
f279a2dbb2
Merge branch 'adafruit:main' into adcdma
2022-09-08 11:46:01 -04:00
Dan Halbert
dd37c81136
Merge pull request #6847 from dhalbert/status-bar-control
...
Allow enabling and disabling of status bar
2022-09-08 10:48:36 -04:00
Dan Halbert
58b00467c4
Merge pull request #6878 from dhalbert/weak-board-defs
...
Use MP_WEAK for default board.c routines
2022-09-08 10:47:08 -04:00
Dan Halbert
4cb69a51d5
Use MP_WEAK for default board.c routines
2022-09-08 07:36:50 -04:00
latkinso42
c1f57c6ceb
Pushing for resolution
2022-09-07 18:53:35 -04:00
Dan Halbert
328138225b
Merge pull request #6868 from PontusO/main
...
Added challenger_rp2040_wifi_ble board
2022-09-07 18:36:52 -04:00
Seon Rozenblum
6c4f352533
Fixed incorrect IO naming for ProS3 and FeatherS3
2022-09-07 19:51:45 +10:00
latkinso42
25078a24a3
Attempt to fix Build-Docs and Pre-Commit
2022-09-06 18:58:57 -04:00
Pontus Oldberg
c043c437f7
Merge branch 'main' of https://github.com/PontusO/circuitpython
2022-09-06 09:37:25 +02:00
Pontus Oldberg
9a937e6ea3
Added challenger_rp2040_wifi_ble board.
2022-09-06 09:37:21 +02:00
latkinso42
5498b3ac91
fix to analogbufio BufferedIn.h
2022-09-05 14:22:08 -04:00
Scott Shawcroft
a09836eb4a
Merge pull request #6681 from PontusO/main
...
Adds support for the Challenger RP2040 SubGHz board
2022-09-05 10:01:51 -07:00
latkinso42
a1856ea3e9
Renaming module from adcbuffer to analogbufio
2022-09-05 12:11:49 -04:00
latkinso42
478b40ecf9
Merge branch 'adcdma' of https://github.com/latkinso42/circuitpython into adcdma
...
Syncing with remote
2022-09-04 16:07:37 -04:00
Lee Atkinson
3cd8259a78
Merge branch 'adafruit:main' into adcdma
2022-09-04 15:59:20 -04:00
latkinso42
d7a1db5b87
Changes per review
2022-09-04 15:57:59 -04:00
Dan Halbert
14498f793d
Merge pull request #6859 from wemos/s3_cpython
...
Add LOLIN S3 ESP32-S3 board.
2022-09-04 13:10:52 -04:00
bill88t
ca7fb6dede
removal of sda-scl and add "GP" to 40,41
2022-09-04 18:05:50 +03:00
bill88t
e1891038c8
Forgor the one IO pin and sda-scl
2022-09-04 16:59:56 +03:00
Dan Halbert
449b43e5a6
Merge pull request #6863 from jepler/rp2pio-erroneous-mask
...
rp2pio: fix occasional bug when not using OUT pins
2022-09-04 09:15:35 -04:00
Jeff Epler
a3e17189a4
rp2pio: fix occasional bug when not using OUT pins
...
a NULL first pin object is used to indicate that there are zero
of some kind of pin associated with the StateMachine. However,
mask_and_rotate wasn't checking for zero. It actually read data from
near address 0x0 and (in my case) got a nonzero mask, which then
caused a program with GPIO11 and GPIO12 as input with pull-up and no
out pins to erroneously encounter the error "pull masks conflict with
direction masks"
2022-09-03 20:39:42 -05:00
wemos
3a18d285a2
Add LOLIN S3 ESP32-S3 board.
2022-09-03 11:06:51 +08:00
latkinso42
6fe2ea4513
Merging back with updated main files
2022-09-02 15:51:45 -04:00
Pontus Oldberg
59fb3fbbd6
Merge branch 'adafruit:main' into main
2022-09-01 10:35:13 +02:00
Dan Halbert
52080e24eb
status bar control
2022-08-30 15:23:44 -04:00
Dan Halbert
3ba385ff5c
Merge pull request #6794 from jepler/esp32-camera-error-checking
...
Esp32 camera error checking
2022-08-30 11:41:42 -04:00
Dan Halbert
371e544a92
Merge pull request #6823 from pypewpew/ugame10-fix
...
Fix ugame.py for the ugame10 board
2022-08-29 12:34:02 -04:00
Jeff Epler
2c6f57be5e
Update ports/espressif/common-hal/esp32_camera/Camera.c
...
Co-authored-by: Mark <56205165+gamblor21@users.noreply.github.com>
2022-08-28 16:46:50 -05:00
Lee Atkinson
04af01a672
Pin Validation fixed/readmultiple return fixed
2022-08-27 14:47:12 -04:00
Radomir Dopieralski
0a0c03c3d2
Fix ugame.py for the ugame10 board
...
It was still trying to use the gamepad module, and there was a typo
2022-08-26 17:07:44 +02:00
Jeff Epler
ebd58155f2
bump pico-sdk to 1.4.0
2022-08-26 09:54:16 -05:00
Jeff Epler
dc27fb967d
error at runtime if no psram actually reserved
2022-08-26 09:27:50 -05:00
Jeff Epler
9f22e75e5e
error if camera is configured but no psram
2022-08-26 09:27:50 -05:00
Jeff Epler
8ed6a6135a
Disable camera on boards without psram
2022-08-26 09:27:50 -05:00
Dan Halbert
83838fc4fd
Merge pull request #6798 from DavePutz/issue_6735
...
Fix handling of zero-length pulseout pulse
2022-08-25 07:49:28 -04:00
Lee Atkinson
37b6079c05
Merge branch 'adcdma' of https://github.com/latkinso42/circuitpython into adcdma
...
Reconciling remote updates
2022-08-24 21:46:28 -04:00
Lee Atkinson
55c0404d85
Merge branch 'adafruit:main' into adcdma
2022-08-24 21:07:12 -04:00
Lee Atkinson
6fd08483e2
Tidying code for PR/ Minor Issues
2022-08-24 17:41:51 -04:00
DavePutz
c00a630f50
Update PulseOut.c
...
reorder the tests for zero-length
2022-08-23 15:58:27 -05:00
root
3daebb36c3
Fix handling of zero-length pulseout pulse
2022-08-23 15:17:54 -05:00
Jeff Epler
6572f85913
Merge pull request #6779 from dhalbert/matrixportal-more-ram
...
matrixportal: remove ulab to make room to freeze portalbase
2022-08-23 09:41:36 -06:00
Lee Atkinson
e23b621d69
Fixing 8 bit and 12 bit conversion
2022-08-22 18:55:55 -04:00
Lee Atkinson
f5655dd48c
Fixing Build errors/ DMA Xfer Rate
2022-08-21 11:44:40 -04:00
Lee Atkinson
68671399d1
More formating
2022-08-19 10:51:13 -04:00
Lee Atkinson
d3c3c9eac4
Tidy a few things
2022-08-18 19:10:16 -04:00
Lee Atkinson
f91af513b7
Introduced odule adcbuffer / removed analogio/AnalogFastIn
2022-08-18 16:23:17 -04:00
Dan Halbert
0c87d0b40d
matrixportal: remove ulab instead of bleio HCI
2022-08-18 10:23:37 -04:00
Lee Atkinson
34b8fbaf14
Merge branch 'adafruit:main' into adcdma
2022-08-18 09:08:10 -04:00
Dan Halbert
2664d3766d
matrixportal: remove BLEIO HCI to make room to freeze portalbase
2022-08-18 07:43:31 -04:00
arturo182
23f2b62196
Add the Solder Party BBQ20KBD board
2022-08-17 20:44:23 +02:00
Scott Shawcroft
2f0e209eca
Merge pull request #6772 from dhalbert/esp32-touch-fix
...
Fix ESP32 touch; rework common code a bit
2022-08-17 10:24:22 -07:00
Dan Halbert
2bc8d73776
Fix ESP32 touch; rework common code a bit
2022-08-16 20:04:27 -04:00
Scott Shawcroft
4b1d1fd72d
Merge pull request #6768 from mayrhomar/main
...
Add Waveshare ESP32-S2-Pico-LCD
2022-08-16 09:50:46 -07:00
Scott Shawcroft
3fbddfde59
Merge pull request #6758 from gamblor21/rp2040_i2ctarget
...
Rp2040 i2ctarget support
2022-08-15 13:57:49 -07:00
Martin
528da05f54
Add Waveshare ESP32-S2-Pico-LCD
2022-08-15 16:46:14 +02:00
Lee Atkinson
4542c801b0
Tidying up loose endson draft PR
2022-08-14 13:03:33 -04:00
lady ada
2f2ccdddbf
pycam rev b pins
2022-08-13 23:41:35 -04:00
gamblor21
7584363f66
Forgot an include
2022-08-13 17:41:45 -05:00
gamblor21
1ae2a2154e
Initial i2ctaret commit
2022-08-13 17:00:43 -05:00
MicroDev
fa3e265bfb
Merge pull request #6753 from tannewt/esp_led_reset
...
Audit all boards with LED pins defined
2022-08-13 15:25:02 +05:30
Lee Atkinson
8cd12b2478
Copyright Change
2022-08-12 16:01:58 -04:00
Lee Atkinson
81c7ba899d
Copyright Update/Acknowledgements
2022-08-12 13:57:45 -04:00
Lee Atkinson
6d8e8c71fc
Merge branch 'adcdma' of https://github.com/latkinso42/circuitpython into adcdma
...
Fixing code behind commits
2022-08-11 17:58:46 -04:00
Lee Atkinson
ce24469848
Merge branch 'adafruit:main' into adcdma
2022-08-11 17:57:01 -04:00
Lee Atkinson
c3c1e307c4
Sample Rate Enhancements
2022-08-11 17:50:30 -04:00
Scott Shawcroft
df1435ae94
Audit all boards with LED pins defined
...
Add them as MICROPY_HW_LED_STATUS so that we can share reset code
for them. They aren't actually used for the status if another RGB
option is available. (But maybe they should be.)
Fixes #6717
2022-08-11 14:41:20 -07:00
Scott Shawcroft
5823bcc744
Merge branch 'main' into c3_short_send
2022-08-11 12:45:02 -07:00
Scott Shawcroft
f1053fb963
Introduce port_yield()
...
This allows the web workflow send code to yield briefly when
waiting for more room to send in a socket. Waiting for an "interrupt"
could wait forever because the select task only waits for read and
error. Adding wait on write is tricky because much of the time we
don't care if the sockets are ready to write. Using yield avoids
this trickiness.
2022-08-11 11:25:34 -07:00
Lee Atkinson
5fb5fd0558
Merge branch 'adafruit:main' into adcdma
2022-08-10 18:33:52 -04:00
Scott Shawcroft
f9d724c09e
Fix retries after successful connection.
...
We may have set retries to 0 to enforce a timeout but the connect
succeeded. When it succeeds, we want to allow retries later in
case we lose signal briefly. (The callback will do this too but
the connect function will override it after.)
Also, remove extra code from websocket that is leftover from
debugging.
2022-08-10 15:24:08 -07:00
Jeff Epler
c2a45c1f27
Merge pull request #6739 from jepler/qrio-esp32camera
...
Enable qrio to work with rgb565 data, including byte-swapped data
2022-08-10 13:54:40 -05:00
Scott Shawcroft
7a5d2e81fc
Merge pull request #6734 from dhalbert/remove-autobrightness
...
Remove support for auto-brightness
2022-08-10 10:22:53 -07:00
Jeff Epler
86f9d98a5d
fix documentation of framebuffer_count
2022-08-10 11:12:54 -05:00
Dan Halbert
af64faae1e
switch back one I2C message
2022-08-10 12:06:43 -04:00
Lee Atkinson
e778112710
Merge branch 'adafruit:main' into adcdma
2022-08-10 10:29:17 -04:00
Lee Atkinson
9e0c580d3d
AnalogFastIn
2022-08-10 09:42:24 -04:00
Dan Halbert
198c8fea11
merge from upstream and fix espressif_esp32s3_eye
2022-08-10 08:43:08 -04:00
Dan Halbert
02cc6c2aee
Merge remote-tracking branch 'adafruit/main' into remove-autobrightness
2022-08-10 08:35:53 -04:00
Scott Shawcroft
138c92f035
Merge pull request #6727 from dhalbert/restore-deleted-modules
...
restore rainbowio and onewireio to a number of boards
2022-08-09 21:44:26 -07:00
Dan Halbert
41bcd7b260
Remove support for auto-brightness
2022-08-09 22:40:21 -04:00
Scott Shawcroft
59b4353282
Merge pull request #6713 from tannewt/exception_filename
...
Add exception filename to title bar
2022-08-09 16:59:12 -07:00
Jeff Epler
5040e1b7a5
Merge pull request #6684 from jepler/espressif-camera-2
...
Rewrite camera support for the Espressif port
2022-08-09 18:50:25 -05:00
Scott Shawcroft
db837e2b48
Merge pull request #6725 from dhalbert/esp-stack-size-16kB
...
increase main task stack size from 8kB to 16kB
2022-08-09 16:40:16 -07:00
Scott Shawcroft
554063a817
Merge branch 'main' into espressif-camera-2
2022-08-09 14:07:14 -07:00
Scott Shawcroft
5084de1b73
Merge pull request #6708 from strid3r21/main
...
Added Smart Bee Design Boards
2022-08-09 14:06:11 -07:00
Dan Halbert
c4db71d12e
Merge pull request #6721 from dhalbert/i2c-target
...
Change I2C terminology from "peripheral" to "target"
2022-08-09 16:12:17 -04:00
Dan Halbert
34b22eac2a
restore rainbowio and onewireio to a number of boards
2022-08-09 16:10:17 -04:00
Dan Halbert
4021b44a39
increase main task stack size from 8kB to 16kB
2022-08-09 15:00:01 -04:00
Scott Shawcroft
df52d995ed
Merge pull request #6714 from dannystaple/patch-2
...
Improve docs for rp2Pio Statemachine frequency
2022-08-09 10:50:27 -07:00
Scott Shawcroft
b3b27a1d80
Remove extra leading spaces
2022-08-09 10:45:47 -07:00
Scott Shawcroft
556d01a685
Remove extra newline at end of file
2022-08-09 10:44:57 -07:00
Scott Shawcroft
ce1273be7a
Pull Feather S2 TFT LED down on reset
2022-08-09 10:42:56 -07:00
Jeff Epler
c74746f052
Cross references in documentation always help
2022-08-09 12:20:02 -05:00
Dan Halbert
84807cd6eb
Change I2C terminology from "peripheral" to "target"
2022-08-09 13:13:19 -04:00
Scott Shawcroft
d95cfc3abc
Merge pull request #6719 from dhalbert/huzzah32-web-workflow
...
enable web workflow on Feather HUZZAH32
2022-08-09 10:08:39 -07:00
Jeff Epler
5a85b8ab95
improve docstrings based on my best sleuthing
2022-08-09 11:42:19 -05:00
Jeff Epler
ec839d6f90
these items should not have been disabled
2022-08-09 11:42:19 -05:00
Jeff Epler
f87e34b9ed
add shutter button
2022-08-09 11:42:19 -05:00
takayoshiotake
5ce3778d75
Add custom board: Octave RP2040
2022-08-09 22:19:38 +09:00
Dan Halbert
10275001ac
enable web workflow on Feather HUZZAH32
2022-08-09 07:26:18 -04:00
paul
15ad24ba62
ran pre-commit.
2022-08-09 04:32:21 -04:00
Danny Staple
3c1c477c5b
Improve docs for rp2Pio Statemachine frequency
...
This frequency can be set to 0 for the system (133mhz) clock speed.
2022-08-08 22:14:55 +01:00
lady ada
2cd9222e5e
add includes
2022-08-07 14:32:29 -04:00
lady ada
029b6b6fbe
add default display
2022-08-07 14:12:40 -04:00
paul
a6eadd6259
Added Bee Motion S3 board
2022-08-07 11:59:43 -04:00
paul
f39058edc4
Added Bee S3 board
2022-08-06 22:22:20 -04:00
Lee Atkinson
f69939c49c
First Commit for AnalogFastIn
2022-08-06 16:22:50 -04:00
Lee Atkinson
56c44f6265
Merge remote-tracking branch 'origin/main'
2022-08-06 15:53:54 -04:00
Lee Atkinson
552f6af4a1
clean up
2022-08-06 15:50:22 -04:00
Jeff Epler
1a11ff864a
Merge remote-tracking branch 'origin/main' into espressif-camera-2
2022-08-05 21:08:12 -05:00
Jeff Epler
1da8065d6b
Merge remote-tracking branch 'origin/main' into espressif-camera-2
2022-08-05 16:38:51 -05:00
Scott Shawcroft
207311b02a
Merge branch 'main' into title_execution_status
2022-08-05 13:42:58 -07:00
Dan Halbert
8c10e09ba0
Merge pull request #6667 from jepler/esp-reserve-heap-for-idf
...
Add ability to reserve psram
2022-08-05 15:06:44 -04:00
Jeff Epler
3f49d77036
Improve esp32-s3-eye board definition
2022-08-05 13:10:21 -05:00
Scott Shawcroft
e7d72b1ebe
Use libgcc from Arch on SAMD21 (it's smaller.)
...
Fixes #4705
2022-08-04 16:33:41 -07:00
Scott Shawcroft
83cbbc9946
Add BLE status to title bar
2022-08-04 16:33:10 -07:00
Scott Shawcroft
125b276af0
Get CIRCUITPY FATFS directly.
...
Otherwise, you may actually get a non-root filesystem.
Fixes #6575
2022-08-04 16:06:27 -07:00
Jeff Epler
861fa9625d
Add the ESP32-EYE aka ESP-EYE
2022-08-04 15:12:12 -05:00
Jeff Epler
98202c8568
Allow changing camera settings that require reinit
...
These can only be changed in a group, though any items to keep
unchanged can be unspecified or specified as None.
2022-08-04 15:12:11 -05:00
Jeff Epler
428fbcd343
remove debug message during build
2022-08-04 15:12:10 -05:00
Jeff Epler
0e26a937cc
Disable camera everywhere it doesn't fit
2022-08-04 15:12:08 -05:00
Jeff Epler
230532f0eb
one last doc build fix
2022-08-04 15:12:07 -05:00
Jeff Epler
a9d53ad2a6
Fix "check-stubs" problems
2022-08-04 15:12:06 -05:00
Jeff Epler
7cb40c9054
further doc build fixes
2022-08-04 15:12:05 -05:00
Jeff Epler
81fb9a5f20
specify return type for docs
2022-08-04 15:12:04 -05:00
Jeff Epler
8bdbe0355a
Add more getters
2022-08-04 15:12:02 -05:00
Jeff Epler
badcae5ace
Fix docstring errors
2022-08-04 15:12:01 -05:00
Jeff Epler
aead0dfe45
Return a Bitmap from take() when appropriate
2022-08-04 15:12:00 -05:00
Jeff Epler
54fe753602
Enable gifio and qrio when appropriate
2022-08-04 15:11:59 -05:00
Jeff Epler
258f72640a
Implement a pile of getters & setters
2022-08-04 15:11:57 -05:00
Jeff Epler
69949ecb43
update PID for this board
2022-08-04 15:11:56 -05:00
Jeff Epler
d1b89fca91
Reset camera when interpreter is reset
2022-08-04 15:11:55 -05:00
Jeff Epler
f54c7adddc
Must treat NO_PIN cast to uint8_t the same as NO_PIN
...
Otherwise, deinitializing a camera with e.g., the powerdown
pin unspecified results in an assertion failure in a debug build.
2022-08-04 15:11:54 -05:00
Jeff Epler
1d1e139379
fix taking multiple pictures
2022-08-04 15:11:53 -05:00
Jeff Epler
b903a020fd
Enable display on esp32-s3-eye
2022-08-04 15:11:52 -05:00
Jeff Epler
8d673bdbf5
reserve 1MB of PSRAM for camera framebuffer on esp32s3-eye
...
.. this setting can be overridden with a bigger or smaller value in
CIRCUITPY/.env but 1/8 of PSRAM seems like a good initial value. It's
enough to store a single 800x600 or 640x480 RGB565 frame, or multiple
smaller frames such as 320x240.
2022-08-04 15:11:51 -05:00
Jeff Epler
5db6db0128
add esp32-camera
...
This uses the esp32-camera code instead of our own homebrewed camera code.
In theory it supports esp32, esp32-s2 and esp32-s3, as long as they have
PSRAM.
This is very basic and doesn't support changing any camera parameters,
including switching resolution or pixelformat.
This is tested on the Kaluga (ESP32-S2) and ESP32-S3-Eye boards.
First, reserve some PSRAM by putting this line in `CIRCUITPY/_env`:
```
CIRCUITPY_RESERVED_PSRAM=524288
```
and hard-reset the board for it to take effect.
Now, the following script will take a very low-resolution jpeg file and print
it in the REPL in escape coded form:
```python
import board
import esp32_camera
c = esp32_camera.Camera(
data_pins=board.CAMERA_DATA,
external_clock_pin=board.CAMERA_XCLK,
pixel_clock_pin=board.CAMERA_PCLK,
vsync_pin=board.CAMERA_VSYNC,
href_pin=board.CAMERA_HREF,
pixel_format=esp32_camera.PixelFormat.JPEG,
i2c=board.I2C(),
external_clock_frequency=20_000_000)
m = c.take()
if m is not None:
print(bytes(m))
```
Then on desktop open a python repl and run something like
```python
>>> with open("my.jpg", "wb") as f: f.write(<BIG PASTE FROM REPL>)
```
and open my.jpg in a viewer.
2022-08-04 15:11:50 -05:00
Jeff Epler
8e08cc38f8
Add default I2C bus to Kaluga
2022-08-04 15:11:48 -05:00
Scott Shawcroft
e0cb8ef17e
Merge pull request #6694 from dhalbert/esp32-no-psram
...
ESP32 no psram support; other ESP32 cleanup
2022-08-04 11:49:39 -07:00
Scott Shawcroft
3707b54e3b
Merge pull request #6672 from bill88t/main
...
Add Waveshare ESP32-S2-Pico
2022-08-04 11:09:59 -07:00
Dan Halbert
202fac59f8
ESP32 fixes for no PSRAM; some cleanup
2022-08-04 13:44:52 -04:00
Dan Halbert
d4e8c19b49
merge from main
2022-08-04 12:43:23 -04:00
Jeff Epler
82be75adb5
Add ability to reserve psram
...
.. the primary user of which will be the camera, since the framebuffers
must be allocated via esp-idf allocation function and never from the
gc heap.
A board can have a default value, and the value can also be set in the
/.env file using the key CIRCUITPY_RESERVED_PSRAM with the value being
the reserved size in bytes.
Co-authored-by: Dan Halbert <halbert@adafruit.com>
2022-08-03 16:19:40 -05:00
Pontus Oldberg
c884194c92
Fixed incorrect PID.
2022-08-03 08:45:39 +02:00
bill88t
68bb6b9988
ran precommit
2022-08-03 09:14:26 +03:00
Bill Sideris
efa3e40f90
Add the one obtained from esp
2022-08-03 08:48:28 +03:00
Dan Halbert
d3d5e36548
update adafruit/esp-idf for ESP32_ECO3_CACHE_LOCK_FIX fix
2022-08-02 22:37:06 -04:00
Dan Halbert
b027d111a9
remove custom console UART from sdkconfig-esp32.defaults
2022-08-02 22:00:59 -04:00
Dan Halbert
534a482d94
initial HUZZAH32 bring-up, with hacked pins
2022-08-02 21:47:46 -04:00
Dan Halbert
767234e79c
Merge pull request #6688 from tannewt/fix_esp32c3_paste
...
Fix C3 when pasting 128+ characters
2022-08-02 21:35:02 -04:00
Dan Halbert
524cc5e274
Merge pull request #6685 from tannewt/esp32_ww
...
Enable Web Workflow on Feather ESP32 V2
2022-08-02 21:30:23 -04:00
Scott Shawcroft
9de8ae70b6
Fix C3 when pasting 128+ characters
...
The ringbuf used to fill up and the recv interrupt would block CP.
Now it'll disable the interrupt until we have enough room in the
ringbuf.
Fixes #6678
2022-08-02 15:25:19 -07:00
Scott Shawcroft
1c69fe1727
Fix S2/S3 USB
...
The new Kconfig that fixed C3 added a dependency on USB_OTG_SUPPORTED
that is only calculated if we include the usb module in cmake.
Fixes #6679
2022-08-02 14:11:09 -07:00
Scott Shawcroft
74e841d835
Read fuses to know what flash and ram pins to never reset
2022-08-02 12:01:42 -07:00
Pontus Oldberg
dfcbc79cdf
Merge branch 'adafruit:main' into main
2022-08-02 14:07:09 +02:00
Bill Sideris
60429f51c7
Add official vid/pid
2022-08-02 09:43:17 +03:00
Scott Shawcroft
f0c6a8c49a
Odroid pin defs
2022-08-01 15:52:08 -07:00
Scott Shawcroft
9661d3256c
Add more ESP32 boards and enable web workflow
2022-08-01 15:52:08 -07:00
Dan Halbert
9baa2724a7
code formatting suggestion
2022-08-01 00:27:25 -04:00
Pontus Oldberg
03181fe362
Adds support for the Challenger RP2040 SubGHz board.
2022-07-31 10:36:04 +02:00
bill88t
c71cc4e0dd
Add Waveshare ESP32-S2-Pico
2022-07-30 15:35:48 +03:00
Dan Halbert
1348cb435b
Fix SAMD I2C frequency check
2022-07-29 19:07:33 -04:00
Scott Shawcroft
312e298890
Fix other ESP builds and arduino_nano_33_iot
2022-07-29 11:02:35 -07:00
Scott Shawcroft
d6344812e8
Lots of web workflow, C3 and title bar fixes
...
* Fixes #6221 - C3 hang on `import wifi`. Enabling the WiFi PHY was
disabling USB. Now boards that use it set CONFIG_ESP_PHY_ENABLE_USB
explicitly.
* Fixes #6655 - Allows pasting into the web serial page. Fixes reading
more than 0xf bytes at a time.
* Fixes #6653 - Fixes web socket encoding of payloads >125 bytes. Can
happen when printing a long string.
* Fixes C3 responsiveness when waiting for key to enter REPL. (It
now correctly stops sleeping.)
* Disables title bar updates when in raw REPL. Related to #6548 .
* Adds version to title bar.
2022-07-28 16:06:56 -07:00
Dan Halbert
3817d007aa
clean up esp32 sdkconfigs
2022-07-28 17:52:27 -04:00
Scott Shawcroft
c4c15206e7
Merge pull request #6608 from tannewt/web_workflow_port
...
Allow for dynamic reconfigure including port
2022-07-28 12:59:31 -07:00
Dan Halbert
282f8c49a6
Merge pull request #6660 from tannewt/fix_c3_serial_tx
...
Improve USB to Serial/JTAG TX
2022-07-28 14:42:56 -04:00
