3ed5b87b8f
nrf: add support for nrf52833
...
This adds preliminary support for the nRF52833, which is a variant of
the nRF52840 with half the RAM, half the flash, and fewer peripherals.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-21 12:29:56 +08:00
bebf27e733
Merge remote-tracking branch 'adafruit/master' into lower_power
...
This isn't perfect and needs a bit more testing.
2020-04-20 18:25:13 -07:00
5fcc6d6286
RGBMatrix: finish renaming from Protomatter
...
This gets all the purely internal references. Some uses of
protomatter/Protomatter/PROTOMATTER remain, as they are references
to symbols in the Protomatter C library itself.
2020-04-17 18:44:07 -05:00
3d6258f63d
Rename Protomatter -> RGBMatrix
...
This is a quick rename, it changes the user-facing names but not the
internal names of things.
2020-04-17 18:43:57 -05:00
a32337718d
Rename _protomatter -> protomatter
...
I originally believed that there would be a wrapper library around it,
like with _pixelbuf; but this proves not to be the case, as there's
too little for the library to do.
2020-04-17 18:43:57 -05:00
b580b34cbf
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-04-14 17:14:44 -07:00
1d8a073c05
nrf: protomatter port
2020-04-14 18:24:58 -05:00
7e69d30c02
Fix nRF PulseIn
2020-04-03 14:22:56 -07:00
8fe512c7e9
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-03-31 15:13:58 -07:00
8a5d3cd6c4
Add exception on small buffer and fix Connecion WRITE handling
2020-03-25 17:41:47 -07:00
3551b769a2
Fix connection handle tracking in PacketBuffer when a server.
2020-03-25 13:31:18 -07:00
c961ed9025
Added 31250 and 56000 to baudrate_map in UART.c, to parallel definitions in nrfx/mdk/nrf*_bitfields.h files
2020-03-24 13:25:02 -04:00
76ca13b6ed
Fix SAMD51 pulsein
2020-03-13 17:21:15 -07:00
48b5f2a384
Initial work on SAMD
2020-03-13 11:16:41 -07:00
affd3fcc2a
Clear the pending IRQ in the NVIC as well.
2020-03-13 11:16:38 -07:00
00d5f63e7c
Hopefully fix PulseIn
2020-03-13 11:12:31 -07:00
ed5cdd7e09
Hopefully fix flash flush and hopefully audio as well.
2020-03-13 11:12:31 -07:00
418333979a
Fix autoreload, neopixel, monotonic_ns and sleep w/o SD
2020-03-13 11:12:31 -07:00
6f60afe8c5
First try at lowering the power consumption
2020-03-13 11:12:30 -07:00
8435935429
update uses of assert_pin_free; remove redundant checks
2020-02-29 15:37:32 -05:00
b6206406de
new pin validation routines; don't use mp_const_none if NULL will do
2020-02-28 23:43:04 -05:00
28c7a1e9c3
Fix crash after empty REPL session
...
We were trying to reset bluetooth when it was off and then trying
to raise an exception without the heap.
2020-02-24 16:11:17 -08:00
f63b2c0d0c
use realloc instead
2020-02-21 17:36:15 -05:00
9cf46ec947
put neopixel_write buffer in root pointers
2020-02-21 08:44:25 -05:00
23d6a3dc1f
merge from upstream
2020-02-20 22:27:16 -05:00
634d246910
relicense nrf SPI.c to MIT
2020-02-20 16:00:21 -05:00
24405cabaf
Edits as a result of review
2020-02-19 00:07:01 +00:00
490a808bf6
Addition of stubs for rs485/CTS/RTS handling on non-implemented chips
2020-02-18 23:16:40 +00:00
e00b3269fe
use properly-sized SPI transactions
2020-02-12 15:04:19 -05:00
2e029d55fc
nrf: add SPIM3 support
2020-02-11 19:22:14 -05:00
005c4caf8c
fix function defs for compiler
2020-02-07 10:32:37 -05:00
857d8ab40a
improve time.monotonic_ns() accuracy from ms to us
2020-02-07 10:02:50 -05:00
a63f49cb83
Merge pull request #2592 from tannewt/add_extra_ble_error
...
Add another error message to BLE
2020-02-05 23:39:17 -05:00
72a1bdab30
Add another error message for extended advertisements at the same
...
time as scan response. The SD can't do it.
2020-02-05 15:56:17 -08:00
b6da2fa173
nrf: fix i2c frequency setting
2020-02-05 11:25:31 -05:00
be4e681d07
fix UICR check; do not use NULL for no MISO
2020-01-31 18:57:41 -05:00
4abd5f1f7b
increase max connections from 2 to 5
2020-01-31 14:58:23 -05:00
87f73e2729
track vm_used_ble better
2020-01-30 09:52:06 -05:00
68f9aee992
reset NeoPixels on CPB on soft reload
2020-01-23 20:16:31 -05:00
85dc4089b9
address review comments
2020-01-14 17:23:16 -05:00
0367ba7495
fix some typos and leftovers
2020-01-13 18:29:34 -05:00
2a75196aa3
merge from adafruit/circuitpython
2020-01-13 18:15:32 -05:00
4ad004f24e
put bonding to-do flags into Connection objects instead of using a heap-allocated queue
2020-01-13 17:52:32 -05:00
9e7f8743c2
fix CCCD bonding store; avoid excessive bonding writes
2020-01-12 23:32:51 -05:00
346ce3b73b
wip: HID bonding works!
2020-01-10 23:55:45 -05:00
6ea8d8a6c2
Merge pull request #2498 from dhalbert/optional-i2c-pullup-checking
...
Make requiring I2C pullups be optional
2020-01-10 11:42:44 -08:00
8708d3dc45
Merge pull request #2461 from jepler/urandom-hardfaults
...
Urandom hardfaults
2020-01-10 11:37:59 -08:00
9c167af17a
wip; redid flash writing to be compatible with SD
2020-01-09 17:40:02 -05:00
189f2d5f07
Make requiring I2C pullups be optional
2020-01-09 17:31:50 -05:00
1c6efb9e66
os.urandom: remove unneeded sleep
2020-01-08 16:48:17 -06:00
1caf6bd8d3
add missing .h file
2020-01-08 15:23:38 -05:00
e1c1e32ceb
address code review
2020-01-08 15:17:54 -05:00
4e040b0152
add reset of heap to board reset for nrf port
2020-01-08 15:15:27 -05:00
34c9e00f08
try (re)using the buffer in neopixel_write
2020-01-08 15:14:53 -05:00
7a94940c89
Replace magic number and add comment.
2020-01-08 11:01:43 -08:00
b3fb024301
nrf: Call into sd as many times as necessary to fill urandom request
...
Generating 51200 bytes in one go takes 4.966s, so that's a rate of about
10KiB/s.
2020-01-08 10:06:55 -06:00
390337b9a5
wip; compiles
2020-01-05 23:33:42 -05:00
82fb761c0f
Add PacketBuffer and MTU negotiation support.
...
PacketBuffer facilitates packet oriented BLE protocols such as BLE
MIDI and the Apple Media Service.
This also adds PHY, MTU and connection event extension negotiation
to speed up data transfer when possible.
2020-01-03 17:29:54 -08:00
f6ec1ea172
Throw an error when we cannot allocate PWM pixel buffer
2020-01-03 15:15:36 -08:00
6afb8dadbc
Change SPI and I2C in the same way.
2020-01-03 15:14:37 -08:00
242d572470
wip
2020-01-03 10:24:07 -05:00
cfd71d9023
Fix nRF UART reset
...
disable only turns off ENABLE but doesn't set the init tracking that
nrfx uses. uninit hangs if ENABLE is off and is called because it
waits forever for TX to stop.
2019-12-27 20:18:07 -08:00
51af8aadb7
nrf: PWMAudioOut: 62500Hz limitation is not needed
...
.. and it gets in the way of some example programs, due to the way
circuitplayground library generates different frequency sine waves
2019-12-19 10:34:56 -06:00
25df6e613a
Merge pull request #2395 from hathach/nrfx-v2
...
upgrade nrfx API to v2
2019-12-18 16:14:25 +07:00
8137ac4c49
nRF: PWMAudioOut: handle non-looping rawsamples
2019-12-17 08:59:08 -06:00
894cad2e17
upgrade nrfx API to v2
2019-12-17 21:39:52 +07:00
ef2ef7a6b8
merge from master
2019-12-12 15:51:13 -05:00
7889b999cc
Fix flash write error handling; clean up safe mode message printing
2019-12-12 14:41:49 -05:00
ae64a669dd
address review comments
2019-12-11 15:43:06 -05:00
68ae47907c
merge from upstream
2019-12-10 21:04:46 -05:00
13620cc4db
nRF: PWMAudioOut: fix half-speed playback of stereo samples
...
The "spacing" of "buffer structure" is confusing, use the "channel count"
instead.
Testing performed on nrf52840 feather:
Play stereo and mono, 8- and 16-bit, 8kHz RawSamples representing 333.33Hz
square waves.
Use both mono and stereo PWMAudioOut instances.
Scope the RC-filtered signal and use the scope's frequency
measurement function, verify the frequency is 333 or 334Hz in all tested
cases.
In the "stereo output" cases, verify both the L and R channels. Verify
the output amplitude is the same in both channels.
In the "stereo output" cases, run a second test where the L channel's
amplitude is attenuated 50%. Verify the output amplitude is correct
in each channel.
2019-12-09 10:57:55 -06:00
f5e913101c
Merge pull request #2301 from tannewt/support_extended_advertising
...
Add support for extended (>31 byte) BLE advertisements.
2019-12-06 23:51:05 -05:00
da0ea979ff
Check connection validity after service discovery.
...
Fixes #2347
2019-12-06 16:03:14 -08:00
40434d6919
wip
2019-12-05 22:45:53 -05:00
17c8356b8c
Add connection interval and debugging
...
This also sets TinyUSB to master and to not include its submodules.
It also fixes an old displayio example comment and retries gattc
reads.
2019-12-04 14:39:02 -08:00
95d9c49e43
Merge remote-tracking branch 'origin/master' into tick-refactor
2019-11-29 11:27:09 -06:00
b32a9192df
make UART.write be blocking on SAMD; add timeout property
2019-11-27 13:05:29 -05:00
3fc58cee38
Merge remote-tracking branch 'adafruit/master' into support_extended_advertising
2019-11-26 13:12:43 -08:00
e5dd78d393
Merge pull request #2324 from jepler/nrf-i2s-channels-widths
...
nrf: assign channel width and count correctly
2019-11-25 16:59:08 -08:00
2653455ded
Merge pull request #2321 from jepler/nrf-i2s-buglets
...
Nrf i2s buglets
2019-11-25 16:11:43 -08:00
1ee35fd6fd
nrf: i2sout: move register settings closer together
...
.. just for consistency's sake
2019-11-25 11:43:51 -06:00
47a6eaa297
nrf: i2sout: Assign SWIDTH
...
The sample width register was never set, so all samples were played
as though they were 16 bit.
After this change, 8-bit samples no longer produce audio on the MAX 98357A
BOB, because only 16-, 24-, and 32-bit samples are supported by the
hardware. This will be addressed by a future change to pad samples to
16 bits; see #2323 and the 98357A datasheet page 6.
2019-11-25 11:43:29 -06:00
8f4bab2d24
i2sout: Correctly retrieve channel_count
...
The meaning of the "single channel" parameter is not well-documented,
but in fact it seems that "true" must be passed or else the returned
channel_count is always 1. This caused stereo samples to be played
incorrectly.
2019-11-25 10:59:59 -06:00
c9946dfd63
nrf: i2sout: Use <, not !=, for loop condition
...
This is good C style, h/t @danh
2019-11-25 09:35:57 -06:00
19d122e546
nrf: i2sout: Fix double-increment when copying samples
...
This caused two problems when playing unsigned samples:
* When an even number of samples were present, it "worked" but only
every other sample was copied into the output, changing the waveform
* When an odd number of samples were present, the copy continued beyond
the end of the buffers and caused a hard fault
2019-11-25 09:07:20 -06:00
77b78d7fb9
Merge remote-tracking branch 'origin/master' into tick-refactor
2019-11-22 14:28:51 -06:00
1c6c9a3e1f
nrf: i2sout: Ensure hardware I2S is stopped at deinit
...
.. otherwise, it may be possible under some scenario, for the background
task to continue and overwrite unrelated memory.
2019-11-22 14:15:07 -06:00
aabb56c840
nrf: i2sout: Only update hold_value when appropriate
...
If we put no samples into the buffer, then there is no last
sample to fill out hold_value with. (and, in fact, the expression such
as *(uint32_t*)(buffer-4) is outside an allocated region)
Detect this condition, and leave the prior value in place.
This improves clicks heard when pausing and resuming a waveform.
2019-11-22 13:54:37 -06:00
743bc829ab
Clean up debug changes
2019-11-21 16:39:57 -08:00
e63796c7bc
Special exception message for when pairing prompt is ignored.
2019-11-21 16:32:42 -08:00
39f4046f70
Fix pairing when peripheral. Central untested.
2019-11-21 16:32:42 -08:00
5e857fdb67
Use BluetoothError in _bleio
...
This better differentiates errors than using OSError everywhere.
2019-11-20 14:02:15 -08:00
11c2c3443f
Add support for extended (>31 byte) BLE advertisements.
2019-11-19 13:55:58 -08:00
7f744a2369
Supervisor: move most of systick to the supervisor
...
This code is shared by most parts, except where not all the #ifdefs
inside the tick function were present in all ports. This mostly would
have broken gamepad tick support on non-samd ports.
The "ms32" and "ms64" variants of the tick functions are introduced
because there is no 64-bit atomic read. Disabling interrupts avoids
a low probability bug where milliseconds could be off by ~49.5 days
once every ~49.5 days (2^32 ms).
Avoiding disabling interrupts when only the low 32 bits are needed is a minor
optimization.
Testing performed: on metro m4 express, USB still works and
time.monotonic_ns() still counts up
2019-11-18 11:01:23 -06:00
81223c76bd
revert error
2019-11-15 13:04:25 -05:00
2c6781f74d
move neopixel_in_use flag to shared-bindings
2019-11-15 12:59:52 -05:00
de5691acf5
Add never_reset and reset to pin common hal, adjust files
2019-11-15 12:47:00 -05:00
8cd2f87e99
Merge pull request #2236 from tannewt/bleio_tweaks
...
Refine _bleio
2019-11-04 22:27:54 -05:00
e3638ffaad
Merge pull request #2262 from jepler/cpb-speaker-disable
...
cpb: Disable the onboard speaker until request
2019-11-03 18:34:29 -05:00
85a648224f
Check for no pullups on I2C on nrf; give arduino nano 33 ble two I2C devices
2019-11-02 22:47:03 -04:00
fe47eba97f
nRF: Handle SPEAKER_ENABLE_PIN
...
.. the existing code, which was never activated by the preprocessor,
wasn't quite right.
2019-11-01 16:23:35 -05:00
47e50e5659
Merge remote-tracking branch 'adafruit/master' into bleio_tweaks
2019-11-01 13:20:58 -07:00
cdeb0857a9
Initial Itsy nRF52840 defn
2019-10-25 11:15:34 -04:00
91c9d519ae
Refine comments and switch prefix_len to size_t
2019-10-22 23:09:56 -07:00
ae30a1e5aa
Refine _bleio
...
This PR refines the _bleio API. It was originally motivated by
the addition of a new CircuitPython service that enables reading
and modifying files on the device. Moving the BLE lifecycle outside
of the VM motivated a number of changes to remove heap allocations
in some APIs.
It also motivated unifying connection initiation to the Adapter class
rather than the Central and Peripheral classes which have been removed.
Adapter now handles the GAP portion of BLE including advertising, which
has moved but is largely unchanged, and scanning, which has been enhanced
to return an iterator of filtered results.
Once a connection is created (either by us (aka Central) or a remote
device (aka Peripheral)) it is represented by a new Connection class.
This class knows the current connection state and can discover and
instantiate remote Services along with their Characteristics and
Descriptors.
Relates to #586
2019-10-21 18:57:03 -07:00
7b79ac3739
Parameterize linker script
2019-10-20 23:50:12 -04:00
eca73436c9
Merge remote-tracking branch 'adafruit/master' into cpu-voltage
2019-10-15 09:03:24 -04:00
fdd7ebef2d
change calibration from analogin_reset() to analogin_init()
2019-10-14 23:38:41 -04:00
c1ab2486f9
return chip vcc value
2019-10-12 15:42:15 -04:00
fae6e29546
nrf: PWMAudioOut: deactivate PWM when deinitting self
...
.. otherwise, when an AudioPWMOut object was deinitted without being
explicitly stop()ped, it would use up a slot in active_audio[]; the
5th iteration would create a non-working audio object which would just
buzz instead of playing the right thing.
Closes : #2203
2019-10-12 14:01:35 +09:00
ef459326cb
nrf: PWMAudioOut: coding style
2019-10-12 13:57:31 +09:00
b5a9ed3688
Merge pull request #2161 from jepler/nrf-analog-reference
...
nRF: Change analog reference voltage
2019-09-17 09:41:52 -07:00
d39c85e3f5
nRF: Change analog reference to VCC(/4)
...
@ladyada says:
"having this be adjustable (reference) would be ideal cause you can get
absolute voltages but for now, VCC/4 + 4x matches every other chip :)"
... and indeed doing it this way happens to give a much more steady
reading when using a VCC-referenced resistance, and so many of the simple
things you'd wire up are actually VCC-referenced anyway.
2019-09-16 21:43:07 -05:00
c56186da8c
nRF: Change analog reference voltage
...
Datasheet reading explains one reason why readings might have been 10% low.
2019-09-16 18:35:48 -05:00
df48312ce7
nRF: PWMOut: At deinit, make pin available again
...
Closes : #2146
2019-09-11 20:09:38 -05:00
7b9dfc9952
nrf: i2s: tune audio buffering
...
.. based on some tasks I found that caused stuttering:
# Test SD and printing
while True: os.listdir('.')
# Test bulk I/O
while True: len(open('somefile.wav', 'rb').read())
Each of these tasks *WAS* worse and I am improving them in a separate
PR by adding RUN_BACKGROUND_TASKS to them.
2019-09-09 20:13:12 -05:00
c66f5a8536
nrf: i2s: rewrite without 'goto'
2019-09-09 19:26:18 -05:00
fe9605a6a3
nrf: i2s: Comment this slightly tricksy code
2019-09-09 19:25:52 -05:00
ccf08aa3df
nrf: I2SOut: deal more gracefully with errors from the sample
2019-09-08 21:59:07 -05:00
f38ee42874
nrf: Add i2s audio output
...
Testing performed: I used a Particle Xenon with a HDA1334 I2S DAC.
I played a variety of mono 16-bit samples at 11025 and 22050Hz nominal
bit rates. With this setup, all the 11025Hz samples sound good.
I tested play, pause, and loop functionality.
During some runs with 22050Hz samples, there were glitches. However,
these may have only occurred during runs where I had set breakpoints
and watchpoints in gdb.
I also tested with a MAX98357A I2S amplifier. On this device, everything
sounded "scratchy". I was powering it from 5V and the 5V rail seemed
steady, so I don't have an explanation for this. However, I haven't
tried it with a SAMD board.
2019-09-08 16:46:35 -05:00
7a64af9280
rename bleio module to _bleio
2019-08-29 18:44:27 -04:00
b11b7916fd
address minor issues: typos, make translate, and sphinx
2019-08-29 17:58:21 -04:00
f17059b10b
another API rework: less abstraction leakage
2019-08-28 23:15:22 -04:00
19c59b41ed
bleio: API change to create and connect related objects simulatenously: no orphan bleio objects
2019-08-28 16:15:09 -04:00
a72bcab0fd
Merge remote-tracking branch 'adafruit/master' into bleio-api-revamp
2019-08-28 16:09:18 -04:00
0364f1dc85
remove some debugging prints
2019-08-26 08:17:59 -04:00
76446f634b
BLE HID WIP: works everywhere except iOS; fixed a bunch of bugs; pretend bonding
2019-08-25 21:38:13 -04:00
7324b70a7c
Rework based on Dan's review
2019-08-23 15:27:21 -07:00
2497cbe186
Fix nrf builds
2019-08-22 14:23:33 -07:00
d37dd4d758
Updated ParallelBus implementation in nrf port
2019-08-22 14:08:33 -07:00
7cc15e56c8
make translate
2019-08-22 15:20:23 -04:00
0b7291d767
fix default crystal value; fix include order
2019-08-22 09:01:05 -04:00
d94023e9b3
Fix CPBlue LFCLKSRC; CPB has no status neopixel
2019-08-22 01:04:00 -04:00
e00696de7f
merge from upstream and make translate
2019-08-20 13:06:23 -04:00
e3dc5e3a66
Merge remote-tracking branch 'adafruit/master' into run-background-tasks
...
Restore dependencies indicated by indentation in circuitpy_mpconfig.h.
2019-08-19 12:41:20 -04:00
26a05d01dc
Merge remote-tracking branch 'origin/master' into nrf-pdm-audioin
2019-08-18 21:30:14 -05:00
912fd7759d
nrf: PDMIn: Implement
...
So far, this supports only 16kHz and 16-bit samples with a fixed gain.
This is enough to support the basic functionality of e.g., sensing
ambient audio levels.
2019-08-18 15:58:04 -05:00
79f8a85786
nrf: stub out audiobusio.PDMIn, audiobusio.I2SOut
2019-08-18 15:55:57 -05:00
e2a4c76a37
make nrf touchio be generic: now available for SAMD51 too
2019-08-18 08:44:10 -04:00
630c92392a
address review comments; avoid calling common_hal_bleio_device... routines from shared-bindings
2019-08-16 15:18:53 -04:00
11dd3a260e
nrf: Use RUN_BACKGROUND_TASKS
2019-08-11 08:53:02 -05:00
1570ef2dd4
specifying attribute length; fix up value setting
2019-08-07 23:49:09 -04:00
d047b73a9c
fix newly-introduced bugs; UART client/server working again
2019-08-07 11:10:21 -04:00
d74c8b9425
WIP: more Descriptor work; refactor gattc/gatts read/write
2019-08-06 22:55:25 -04:00
243334da75
Merge remote-tracking branch 'adafruit/master' into ble-pairing
2019-08-05 23:06:24 -04:00
b675a27e16
Merge pull request #2000 from jepler/nrf-pwm-audio
...
Implement PWM audio out for the nrf port
2019-08-05 17:26:27 -07:00
b67d04a5b1
Merge remote-tracking branch 'adafruit/master' into ble-pairing
2019-08-05 16:35:44 -04:00
77bc1ba03e
nrf: PWMAudioOut: Remove the need to wait in "pause"
...
The original formulation was because I saw the need to avoid a transition
from playing to stopped exactly when a resume was taking place. However,
@tannewt was concerned about this pause causing trouble, because it could
be relatively lengthy (several ms even in a typical case).
After reflection, I've convinced myself that updating the registers
in this order in resume avoids a window where a "stopped" event can
be missed as long as the shortcut is updated first.
Testing re-performed: pause/resume testing of looped RawSample and
WaveFile audio sources.
2019-08-03 08:19:25 -05:00
7ce3776b80
WIP: rework of Characteristic properties; enhance Descriptor; not tested
2019-08-02 17:57:31 -04:00
34e2bab96a
nrf: Implement RUNMODE_BOOTLOADER and RUNMODE_SAFE_MODE
2019-08-01 18:53:07 -05:00
76f65ac694
Implement play/pause
...
.. and also incidentally fix a problem where a RawSample could only
be looped 131070 times.
2019-07-31 20:02:56 -05:00
91d791afd0
cleanup adapter.address; add uniquish suffix to BLE device name
2019-07-31 00:30:24 -04:00
83129b8c63
BLE: peripheral client pairing (not yet bonding); fix time doc formatting
2019-07-30 14:26:26 -04:00
b72352949b
PWM audio: Rename AudioOut -> PWMAudioOut, _audioio_ -> _audiopwmio_
2019-07-29 18:39:00 -04:00
28ca05ccdc
allow discovery from central or peripheral
2019-07-27 13:22:15 -04:00
a183425e00
ports/nrf: Implement audioio.AudioOut using PWM
...
This implements AudioOut, with known caveats:
* pause/resume are not yet implemented (this is just a bug)
* at best, the sample fidelity is 8 bits (this is a hardware limitation)
Testing performed:
My test system is a Particle Xenon with a PAM8302 op-amp
https://www.adafruit.com/product/2130 and 8-ohm speaker. There's no
analog filtering between the Xenon's PWM pin and the "A+" input of
the amplifier; the "A-" pin is disconnected. It is powered from
VUSB.
I used pin D4, which is *NOT* listed as a low-speed-only pin, but
the code does NOT switch the pin to high drive. This is related to
an open issue for general inability to set drive level for pins
being used by a "special function" on nrf:
https://github.com/adafruit/circuitpython/issues/1270
Nothing about the code I've written should limit the usable pins.
All samples I played were 16-bit, generally monophonic at 11025Hz
and 22050Hz from the Debian LibreOffice package.
2019-07-26 07:57:11 -05:00
2bc704fe07
ports/nrf: factor out routines for allocating, freeing pwm channels
2019-07-26 07:52:37 -05:00
8ec2d6ce49
Merge pull request #2007 from hierophect/F4xx-port-setup
...
Add STM32 Discovery F412ZG and F411RE support
2019-07-24 18:49:48 -07:00
58630a844a
Add feature conditionals and clean up
2019-07-22 12:58:28 -04:00
6797ec6ed3
Add support for grayscale displays that are < 8 bit depth.
...
This also improves Palette so it stores the original RGB888 colors.
Lastly, it adds I2CDisplay as a display bus to talk over I2C. Particularly
useful for the SSD1306.
Fixes #1828 . Fixes #1956
2019-07-19 16:06:11 -07:00
43e8a4110f
Add missing files for DigitalIO
2019-07-17 14:18:01 -04:00
364ee62d10
Address review comments.
2019-07-16 19:53:36 -04:00
1cf8a3e8d8
Merge remote-tracking branch 'adafruit/master' into ble-scanner
2019-07-11 18:42:16 -04:00
6fad383367
Merge pull request #1925 from C47D/rgb_status
...
Initial support for RGB led as Status indicator, fixes #1382
2019-07-09 10:31:34 -07:00
6a001786a9
merge from master
2019-07-09 08:58:49 -04:00
118b26b335
UARTClient now works both directions
2019-07-09 00:21:46 -04:00
09ddff8df1
WIP: Need descriptors for Central CCCD discovery; not done yet
2019-07-07 00:07:47 -04:00
5610e05b8c
Fix up nrf so that it is initialized properly. Also, do not reset
...
it's pins.
2019-07-06 12:48:16 -07:00
6e5d70fa19
changed type of receiver_buffer_size to uint16_t
2019-07-03 12:02:01 -07:00
bf8a35b2f8
WIP: CharacteristicBuffer for Central; not working: need to set remote Characteristic Service
2019-07-02 22:34:54 -04:00
6ea01ea9b0
Central is connecting; characteristics can be read and written
2019-06-29 00:20:06 -04:00
140904ec84
getting Scanner to work
2019-06-22 22:10:15 -04:00
4881e1ff55
WIP: Central compiles; now will test
2019-06-21 18:04:04 -04:00
23bd861c9a
nrf: fix neopixel_write pwm buf size calc
2019-06-20 18:02:14 -04:00
24ac1fdcab
WIP: backup only; not compiled
2019-06-19 21:54:28 -04:00
a1b5d800f3
Update copyrights; get ready for Central
2019-06-19 10:42:36 -04:00
35b9191857
Don't operate directly on bleio objects in shared-bindings: use common_hal
...
routines instead. Changes made but not yet tested.
2019-06-18 23:46:20 -04:00
bed6d43a76
merge from upstream; WIP redo Address; no more AddressType
2019-06-13 21:55:07 -04:00
1905d90eaa
Make advertising data buffers long-lived
2019-06-05 20:08:53 -04:00
613e12f99f
Replace Broadcaster with enhanced Peripheral
2019-06-03 20:40:05 -04:00
63ac37946d
1. Remove advertising data construction in C: it's all done in Python now
...
2. Add scan response capability to advertising.
2019-06-02 23:21:30 -04:00
12f1d9d30c
fix advertisement length check; add Service.secondary attribute
2019-05-31 18:03:05 -04:00
6cec81bcb5
Need to enable ble before scanning
2019-05-23 22:05:16 -04:00
1639354e5f
Scanner working, but not very first time
2019-05-23 16:07:54 -04:00
15b7946fc4
Off-by-one error for usage of MAX_TX_IN_PROGRESS
2019-04-22 22:07:48 -04:00
9c42a72275
Fix up single-byte access to nvm.ByteArray
2019-04-16 14:53:44 +10:00
83dad37562
Fixups for adafruit/circuitpython#1042
2019-04-16 14:53:44 +10:00
02dd32da60
Make some space for NVM adafruit/circuitpython#1042
2019-04-16 14:53:44 +10:00
66e8ceafad
switch nvm.ByteArray to use new nrf_nvm_safe_flash_page_write
...
adafruit/circuitpython#1610
2019-04-16 14:53:44 +10:00
d0e5af3b09
Working flash pages for nvm.ByteArray adafruit/circuitpython#1042
...
import microcontroller
def dump(n = microcontroller.nvm):
for i in range(0,len(n)):
print ("%02X " % n[i], end="")
if i % 16 == 15: print('')
microcontroller.nvm[0:4096] = bytes([1,2,3,4,5,6,7,8]) * 512
microcontroller.nvm[4096:8192] = bytes([16,17,18,19]) * 1024
microcontroller.nvm[4090:4101] = b'thisisatest'
microcontroller.nvm[100:105] = b'hello'
microcontroller.nvm[8000:8007] = b'goodbye'
dump()
2019-04-16 14:53:44 +10:00
933500c448
nvm.ByteArray reads & writes but no sensible erase yet adafruit/circuitpython#1042
2019-04-16 14:53:44 +10:00
df89156f2f
Start on nRF nvm.ByteArray adafruit/circuitpython#1042 (doesn't do anything yet)
2019-04-16 14:53:44 +10:00
254d0a53ac
Revert "nrf nvm: touchups to nickzoic PR #1768"
2019-04-15 18:50:33 -07:00
864910559b
fix subscripting
2019-04-10 21:41:55 -04:00
18908c21f7
Fixups for adafruit/circuitpython#1042
2019-04-09 12:53:11 +10:00
fdaff00c78
Make some space for NVM adafruit/circuitpython#1042
2019-04-09 10:56:53 +10:00
bc92441803
switch nvm.ByteArray to use new nrf_nvm_safe_flash_page_write
...
adafruit/circuitpython#1610
2019-04-09 10:55:39 +10:00
8e7fee2246
Working flash pages for nvm.ByteArray adafruit/circuitpython#1042
...
import microcontroller
def dump(n = microcontroller.nvm):
for i in range(0,len(n)):
print ("%02X " % n[i], end="")
if i % 16 == 15: print('')
microcontroller.nvm[0:4096] = bytes([1,2,3,4,5,6,7,8]) * 512
microcontroller.nvm[4096:8192] = bytes([16,17,18,19]) * 1024
microcontroller.nvm[4090:4101] = b'thisisatest'
microcontroller.nvm[100:105] = b'hello'
microcontroller.nvm[8000:8007] = b'goodbye'
dump()
2019-04-09 10:55:39 +10:00
492431a694
nvm.ByteArray reads & writes but no sensible erase yet adafruit/circuitpython#1042
2019-04-09 10:54:11 +10:00
f8e5e2da64
Start on nRF nvm.ByteArray adafruit/circuitpython#1042 (doesn't do anything yet)
2019-04-09 10:54:11 +10:00
049b9ca094
Remove terse TODOs
2019-04-08 14:46:45 -07:00
8323721232
Stop hard-coding SPI frequency in FourWire
...
Instead remember and use the frequency, polarity and phase that was
set when the bus was first created.
2019-04-06 15:15:29 +02:00
781d301bb6
Remove unnecessary MP_WEAK declarations
2019-04-02 13:33:22 +11:00
94bda3bde1
Change nRF RTC implementation to use RTC2 #1046
...
(to avoid interference with Bluetooth Softdevice. See
https://github.com/adafruit/circuitpython/pull/1534#issuecomment-478776240
with thanks to @bboser for pointing it out)
2019-04-02 13:28:22 +11:00
6afe23d0b0
There isn't really a good way to calibrate this RTC adafruit/circuitpython#1046
2019-04-02 13:28:03 +11:00
6206fa9a82
adafruit/circuitpython#1046 handle overflows in the RTC counter
2019-04-02 13:27:45 +11:00
f846fa109e
enable NRFX RTC adafruit/circuitpython#1046
2019-04-02 13:27:28 +11:00
f88f9fd748
more fake RTC code ... adafruit/circuitpython#1046
...
(works if MP_WEAK common_hal_rtc_get_time is removed)
2019-04-02 13:27:13 +11:00
4a5c52fbd6
starting on #1046 rtc for nRF
2019-04-02 13:27:00 +11:00
0653bca323
Revert "Circuitpython nickzoic 1046 nrf rtc"
2019-03-29 16:41:29 -04:00
71622a4515
There isn't really a good way to calibrate this RTC adafruit/circuitpython#1046
2019-03-28 09:50:09 +11:00
28254def0b
adafruit/circuitpython#1046 handle overflows in the RTC counter
2019-03-28 09:50:09 +11:00
b09d2c3c62
enable NRFX RTC adafruit/circuitpython#1046
2019-03-28 09:50:09 +11:00
69cf33e6a1
more fake RTC code ... adafruit/circuitpython#1046
...
(works if MP_WEAK common_hal_rtc_get_time is removed)
2019-03-28 09:50:09 +11:00
77f307c642
starting on #1046 rtc for nRF
2019-03-28 09:50:09 +11:00
f440e41819
Really fix the error messages in bleio, this time
2019-03-25 14:04:50 +01:00
bb10a8aaa1
Fix error messages in bleio
2019-03-25 09:19:48 +01:00
fe555a4098
Allow NFC pins to be used for other purposes.
2019-03-21 11:22:58 -04:00
99da3b9646
Use critical section, not lock, in CharacteristicBuffer; use a root pointer for ble_drv list
2019-02-21 00:19:31 -05:00
a345ef28f2
finish Makefile refactoring; nrf builds work
2019-02-15 18:55:10 -05:00
ab4194f752
don't allocate DMA buffer as long-lived
2019-02-13 19:49:57 -05:00
e92d90ce9c
Add second UARTE to busio.UART. Init uarts on startup.
2019-02-12 22:34:05 -05:00
37b9cd5974
Merge pull request #1521 from nickzoic/circuitpython-nickzoic-1045-nrf-rotaryio
...
Circuitpython nickzoic 1045 nrf rotaryio
2019-02-07 10:38:20 -08:00
b9db977a2d
Change pin mode to pullup for adafruit/circuitpython#1045
2019-02-07 09:47:56 +11:00
a7c349bc6e
Add quarter-click logic to adafruit/circuitpython#1045
2019-02-05 16:41:33 +11:00
95454ecde0
useful output from rotaryio adafruit/circuitpython#1045
2019-02-05 16:41:33 +11:00
21eb7e8e64
GPIOTE handlers for rotaryio.IncrementalEncoder adafruit/circuitpython#1045
2019-02-05 14:15:13 +11:00
ee21cc163f
Start on rotaryio.IncrementalEncoder adafruit/circuitpython#1045 (does nothing yet!)
2019-02-05 14:15:03 +11:00
ec03887040
Fix hallowing and nrf builds
2019-01-31 11:42:15 -08:00
164e1e2341
re-init usb hardware when enable/disable SD
2019-01-30 14:13:07 +07:00
765d877dfa
Merge pull request #1499 from nickzoic/nickzoic/circuitpython-nrf-touchin-1048
...
Nickzoic/circuitpython nrf touchin 1048
2019-01-28 00:22:34 -08:00
294b026aca
Automatically set a default threshold for touchio.TouchIn channels
2019-01-28 18:22:57 +11:00
539aaf08b5
speed up measurement loop
2019-01-27 21:54:59 +11:00
4a093294ac
hugely simplified version of the touchio.TouchIn.get_raw_reading code ( adafruit/circuitpython#1048 )
2019-01-27 15:08:03 +11:00
7998a7696d
also handle BLE_GATTS_EVT_SYS_ATTR_MISSING: fixes Android:
2019-01-23 22:12:38 -05:00
b1f1bb1389
support BLE_GAP_EVT_DATA_LENGTH_UPDATE_REQUEST, sent by newer devices
2019-01-23 21:07:23 -05:00
e170e03f8c
Merge remote-tracking branch 'adafruit/master' into bleio2
2019-01-21 20:38:26 -05:00
28cfd8a513
CharacteristicBuffer: make it be a stream class; add locking
2019-01-19 19:45:35 -05:00
edc8383e22
Improvements thanks to danh's review
2019-01-18 16:37:06 -08:00
fddc98858a
fix nonetype handling and nrf never reset
2019-01-17 18:51:40 -08:00
6404aaf411
Fix up nrf and using board.SPI in FourWire
2019-01-17 18:19:07 -08:00
760bd8d8a4
share fourwire and make nrf compile
2019-01-17 15:15:59 -08:00
50ee5ef24c
merge translations; add bleio comments; fix minor sphinx issues in midi
2019-01-10 21:12:17 -05:00
f366e3feea
Merge branch 'master' into nrf52_pulsein
2019-01-09 20:39:35 +07:00
cfc4c8cbfa
minor clean up
2019-01-09 15:43:54 +07:00
db82160eef
fix pulsein incorrect compute
2019-01-09 15:15:30 +07:00
13d607698e
m_tx_in_progress might underflow (check on this)
2019-01-08 16:37:14 -05:00
50641c4152
remove debugging printf's
2019-01-08 15:52:21 -05:00
f66f55b4ed
add CharacteristicBuffer; UART seems to work!
2019-01-07 22:46:20 -05:00
215008f78c
clean up neopixel write !!
2019-01-08 00:21:31 +07:00
Sean Cross
Scott Shawcroft
Jeff Epler
William Moser
Dan Halbert
Dave Marples
Dan Halbert
Scott Shawcroft
Roy Hooper
Ha Thach
Hierophect
Benny Meisels
jepler
iot49
Nick Moore
Radomir Dopieralski