c7efc94a33
watchdog: move timeout exception to shared-bindings
...
Make this exception globally available to all platforms that have
enabled the watchdog timer.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:49 +08:00
15530a69c7
supervisor: tick: check for watchdog exception if enabled
...
Check to see if the current exception is a Watchdog exception, if it's
enabled. This ensures we break out of the current sleep() if a watchdog
timeout hits.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:49 +08:00
8c5df5f732
supervisor: add a new WATCHDOG_RESET safe mode reason
...
This mode will be used if the board is reset due to the watchdog
expiring.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:49 +08:00
ec99dae953
tick: break on watchdog timeout exception
...
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:49 +08:00
d1a7fdd9d4
supervisor: support debugging tinyusb
...
Allow for passing `-DCFG_TUSB_DEBUG=1` or `-DCFG_TUSB_DEBUG=2` on the
command line to enable debugging tinyusb within circuitpython.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-21 21:35:30 +08:00
916ca9f8a6
Merge pull request #2910 from tannewt/esp32s2
...
Add initial ESP32S2 support
2020-05-19 12:53:23 -07:00
34f91f01c6
bleio: adapter: add advertising timeout and status
...
Add a field to allow specifying a timeout when initiating advertising.
As part of this, add a new property to determine if the device is still
advertising.
Additionally, have the `anonymous` property require a timeout, and set
the timeout to the maximum possible value if no timeout is specified.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-19 15:01:19 +08:00
cfe65742a3
_bleio: support anonymous advertising
...
Add a new parameter to the `start_advertising()` function to enable
anonymous advertising. This forces a call to `sd_ble_gap_privacy_set()`
with `privacy_mode` set to `BLE_GAP_PRIVACY_MODE_DEVICE_PRIVACY` and
`private_addr_type` set to
`BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE`.
With this, addresses will cycle at a predefined rate (currently once
every 15 minutes).
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-19 15:01:18 +08:00
2c2b53303d
Merge pull request #2837 from k0d/serial-debug
...
Add support for a debug console, such as ST-Link VCP.
2020-05-18 18:13:31 -07:00
007c92ee6a
Enable showing the console on a debug uart
2020-05-19 02:02:52 +02:00
6aaab005c5
Initial ESP32S2 port.
...
Basic blinky works but doesn't check pins.
2020-05-15 15:36:16 -07:00
964040b770
More erroneous else statements
2020-05-09 12:16:04 -07:00
8b6587a0c6
Unified single_status_byte & no_reset_cmd behavior
2020-05-09 12:09:01 -07:00
9e01bb2136
Removing erroneous else statements
2020-05-09 12:03:26 -07:00
9ef28d8536
Replacing device that was accidentally deleted
2020-05-09 12:00:59 -07:00
c377d4bea7
Merge branch 'master' into non-standard-nvm
2020-05-04 16:08:45 -04:00
28179a3aaf
.../external_flash.c: Don't attempt to issue CMD_READ_STATUS2 for
...
devices with only a single_status_byte.
2020-05-03 18:33:01 -04:00
cc290c50c6
fixing diff error
2020-04-28 18:15:38 -07:00
6c4decd4e2
decoupling chip specific functions from EXTERNAL_FLASH_QSPI_SINGLE
2020-04-28 11:51:07 -07:00
755d404edf
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-04-27 16:45:10 -07:00
86943ca8a1
Merge remote-tracking branch 'adafruit/master'
2020-04-27 13:51:51 -07:00
9e4b94f466
Merge pull request #2805 from tannewt/update_tinyusb
...
Update tinyusb
2020-04-26 20:55:36 -07:00
dcb0e50f04
Fix USB midi and hid disable.
2020-04-21 14:15:44 -07:00
05b5356acc
external_flash: add support for mx25r1635f
...
This flash chip is used in Simmel.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-21 09:56:05 +08:00
bebf27e733
Merge remote-tracking branch 'adafruit/master' into lower_power
...
This isn't perfect and needs a bit more testing.
2020-04-20 18:25:13 -07:00
5fcc6d6286
RGBMatrix: finish renaming from Protomatter
...
This gets all the purely internal references. Some uses of
protomatter/Protomatter/PROTOMATTER remain, as they are references
to symbols in the Protomatter C library itself.
2020-04-17 18:44:07 -05:00
7e3d4c61b5
Update TinyUSB and add interrupt hooks.
2020-04-17 14:16:49 -07:00
b580b34cbf
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-04-14 17:14:44 -07:00
d8362ef654
displayio: swap colors in palettes too
...
.. change the in-rom palette to be in RGB565 order
2020-04-14 18:25:00 -05:00
1f3821220e
fix build for non-displayio & non-protomatter targets
2020-04-14 18:24:58 -05:00
3a94412cd3
protomatter: more memory allocation fixes
...
- bump supervisor alloc count by 4 (we actually use 5)
- move reconstruct to after gc heap is reset
- destroy protomatter object entirely if not used by a FramebufferDisplay
- ensure previous supervisor allocations are released
- zero out pointers so GC can collect them
2020-04-14 18:24:58 -05:00
094fe05bdd
allow retrieving info about a supervisor allocation
2020-04-14 18:24:54 -05:00
826837186c
adds standard (non-queued) SPI support to QSPI for external flash
2020-04-07 18:17:25 -07:00
c0ba2a839f
Updates based on feedback from jepler
2020-04-06 16:03:31 -07:00
e99cf6e441
Rework sleep timing
...
It didn't account for background task time and could end up
sleeping for way longer than it should because the RTC compare time
had already passed.
2020-04-03 18:07:56 -07:00
c248730bd1
Clean up
2020-04-02 17:36:09 -07:00
8fe512c7e9
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-03-31 15:13:58 -07:00
b1d83c3f5e
supervisor/shared/external_flash/devices.h: Add MX25L51245G support.
...
Add external flash support for Macronix MX25L51245G 64MiB SPI flash.
2020-03-25 17:16:09 -04:00
2623022c84
Initial work for STM32. Need to fix us delay and PulseIn still.
2020-03-20 12:58:34 -07:00
612ba2f45d
Fix DotStar status LED init.
2020-03-17 12:11:11 -07:00
4297ae2d0b
Fix DotStar status LED init.
2020-03-17 12:10:12 -07:00
7100d5e485
Fix autoreload and ticks in general
2020-03-13 16:13:24 -07:00
ed5cdd7e09
Hopefully fix flash flush and hopefully audio as well.
2020-03-13 11:12:31 -07:00
418333979a
Fix autoreload, neopixel, monotonic_ns and sleep w/o SD
2020-03-13 11:12:31 -07:00
6f60afe8c5
First try at lowering the power consumption
2020-03-13 11:12:30 -07:00
415cb351c7
Merge pull request #2655 from jepler/thing51
...
samd51 thing plus: new port
2020-02-25 14:13:47 -06:00
f20255813f
samd51 thing plus: new port
...
testing performed:
* successfully store and retrieve a 500kB file on the flash
* square wave output on each pin appears on o'scope
* board.SPI(), board.SERIAL(), board.I2C() all construct
2020-02-25 11:52:23 -06:00
876c646d09
Fix Mac crash when waking up with an ejected CIRCUITPY
...
We now correctly set the reason for the unit not being ready and
always start the unit.
Fixes #2567
2020-02-24 15:40:52 -08:00
e8f7141564
Disable BLE file service for now
...
Fixes #2633
2020-02-20 12:15:56 -08:00
cde9b63eab
Merge pull request #2615 from mubes/label-drive
...
Allow drive name to be set per target
2020-02-12 10:43:04 -08:00
Sean Cross
Scott Shawcroft
Mark Olsson
Scott Shawcroft
Max Holliday
Dan Halbert
Brian Dean
Jeff Epler
Jeff Epler
Jeff Epler