6c61a53e0f
io naming for gpio (credit to @kattni)
2020-11-02 18:38:23 -05:00
23afe08b6f
Add GPIO reset to end of neopixel-write
2020-11-02 17:15:19 -05:00
1f7a3f0dfa
Rev C Feather M4 CAN pin changes
2020-11-02 15:28:30 -05:00
041c2a9f61
.../boards/bdmicro_vina_d51: PAD updates for better resource flexibility.
2020-11-02 08:35:25 -05:00
4e52757f26
Update pins.c
...
Added LED, BOOST_EN and VEXT_SELECT pins.
2020-11-01 22:22:55 +01:00
72b829dff0
add binascii to most builds
2020-11-01 14:52:03 -05:00
4438050f79
Add pcnt handler
2020-11-01 18:00:07 +05:30
1762a36438
restore analogio to feather_m0_rfm9x/rfm69 builds
2020-11-01 05:46:13 -05:00
144eb131ae
Merge pull request #3627 from adafruit/6.0.x
...
Merge 6.0.x bugfixes to main
2020-10-31 12:28:20 -04:00
9a8484b853
Update mpconfigboard.h
...
Removed ignore PA30 PA31 in order to allow using them as pinout
2020-10-31 11:06:56 +01:00
a7616808e9
Updated pinout
2020-10-31 10:12:49 +01:00
09ae9aefa8
Merge pull request #3610 from Edrig/main
...
Add new board to nrf port: holyiot_nrf52840
2020-10-30 12:03:34 -07:00
7fd73c7d39
Initial UDP work. Need to test
2020-10-28 18:08:31 -07:00
59b9ca409c
matrixportal ESP TX and RX pins were swapped
2020-10-28 20:33:10 -04:00
25bad660c6
add light sensor, move batt monitor
2020-10-28 19:23:18 -04:00
7cbc50962b
Merge pull request #3611 from tannewt/esp32s2_eink_portal
...
Add Adafruit ESP EInk Portal and grayscale EInk support
2020-10-28 14:45:29 -07:00
5ab2f16f64
Change Board Name to ADM_B_NRF52840_1
...
edit : .github/workflows/build.yml
rename : ports/nrf/boards/holyiot_nrf52840/board.c -> ports/nrf/boards/ADM_B_NRF52840_1/board.c
rename : ports/nrf/boards/holyiot_nrf52840/mpconfigboard.h -> ports/nrf/boards/ADM_B_NRF52840_1/mpconfigboard.h
rename : ports/nrf/boards/holyiot_nrf52840/mpconfigboard.mk -> ports/nrf/boards/ADM_B_NRF52840_1/mpconfigboard.mk
rename : ports/nrf/boards/holyiot_nrf52840/pins.c -> ports/nrf/boards/ADM_B_NRF52840_1/pins.c
2020-10-28 22:08:10 +01:00
5e3bfa1956
countio implementation for esp32s2
2020-10-28 20:08:25 +05:30
9a4efed8cb
Start tweaking the workflow to sleep
2020-10-27 17:55:03 -07:00
b44011d196
fix railing Whitespace pin.c
2020-10-28 01:43:42 +01:00
b5c95e3b1a
Merge branch 'main' of https://github.com/Edrig/circuitpython into main
...
modifié : boards/holyiot_nrf52840/pins.c
2020-10-28 00:40:46 +01:00
9b911b2211
modifié : pins.c
2020-10-28 00:38:07 +01:00
27827a4fef
Fix EOF error
...
modifié : mpconfigboard.mk
modifié : pins.c
2020-10-28 00:34:07 +01:00
930cf14dce
Add check for invalid io, function to disable all alarms
2020-10-27 16:17:26 -07:00
e35938971a
Add description of alarm modules
2020-10-27 16:16:55 -07:00
59df1a11ad
Add alarm_touch module
2020-10-27 16:16:52 -07:00
da449723df
Fix build error
2020-10-27 16:16:15 -07:00
4d8ffdca8d
restructure alarm modules
2020-10-27 16:15:09 -07:00
e5ff55b15c
Renamed alarm modules
2020-10-27 16:13:25 -07:00
21ba61afbb
Add function to disable alarm
2020-10-27 16:13:25 -07:00
05a3f203db
Add function to get time elapsed during sleep
2020-10-27 16:13:25 -07:00
e310b871c8
Get io wake working
2020-10-27 16:13:25 -07:00
90b9ec6f2c
Initial Sleep Support
2020-10-27 16:13:22 -07:00
d0426b3438
Update pins.c
...
fix mistake
2020-10-27 23:54:46 +01:00
557a58b244
Merge pull request #3591 from microDev1/TouchIO-S2
...
ESP32S2: Support for native TouchIO
2020-10-27 14:11:39 -07:00
73162bda85
Merge pull request #3584 from jepler/can-esp32s2
...
esp32s2: implement canio
2020-10-27 14:01:07 -07:00
54c0e98a37
Fix openbook build
2020-10-27 13:58:23 -07:00
80029f6929
rotaryio implementation for esp32s2
2020-10-28 00:12:13 +05:30
5110fec312
Merge pull request #3608 from adafruit/6.0.x
...
Update main with latest 6.0.x
2020-10-27 11:47:44 -05:00
3a501a0495
esp32s2: canio: respond to review comments
...
* explain the introduction of the temporary variable in get_t_config
* get rid of unneeded __attribute__
* get rid of unneeded members of canio_can_obj_t
* get rid of unneeded header inclusion
2020-10-26 19:18:37 -05:00
2ba6659967
esp32s2: Makefile: restore --no-stub
2020-10-26 19:07:37 -05:00
95cb5961d2
Fix ESP32-S2 SPI when DMA is sometimes used
2020-10-26 16:59:59 -07:00
fc591c8d84
Add EInk Portal
2020-10-26 16:59:59 -07:00
5deb045a81
Ready to PR
...
* ../../.github/workflows/build.yml
+ boards/holyiot_nrf52840/board.c
+ boards/holyiot_nrf52840/mpconfigboard.h
+ boards/holyiot_nrf52840/mpconfigboard.mk
+ boards/holyiot_nrf52840/pins.c
2020-10-26 23:32:57 +01:00
caca0609bd
Merge pull request #3607 from hierophect/esp32-readme-clarity
...
ESP32-S2: Fix readme link, improve instruction clarity
2020-10-26 12:43:51 -05:00
32f2a8d54c
Fix readme link
2020-10-26 11:03:54 -04:00
396d92f867
esp32s2: Add canio
...
This works in loopback mode, though the hardware filtering only permits a
single address or mask filter.
2020-10-26 09:54:58 -05:00
ef97ed6ab6
Update touchio implementation
2020-10-23 13:17:49 +05:30
c8808f41a5
Merge pull request #3580 from astrobokonon/esp32s2-FixSTAMODE
...
ESP32S2: Reset sta_mode and ap_mode flags
2020-10-22 13:48:45 -07:00
f431f859e7
Initial support for native touchio
2020-10-22 21:32:44 +05:30
fa4c4c2c10
Merge pull request #3587 from adafruit/6.0.x
...
Merge in two fixes from 6.0.x
2020-10-21 20:12:20 -05:00
ff69ab603d
fix CPB SPI pin definitions
2020-10-21 17:07:30 -04:00
50e90088a2
Merge pull request #3586 from Targett363/esp32s2_module_clip
...
Esp32s2 module clip
2020-10-21 12:58:23 -07:00
e202da4dad
Change comment wording
2020-10-20 15:14:35 -07:00
c58b0adf64
Reset sta_mode and ap_mode flags
2020-10-20 14:49:57 -07:00
1a677406bf
Merge pull request #3529 from jensechu/color-converter-transparency
...
displayio: Pass transparent_color to ColorConverter
2020-10-20 10:41:57 -07:00
8beb36c240
Use one lto partition
...
This leads to smaller code size at the expense of slower linking.
We can turn partitioning back on with GCC10 because it produces smaller code.
2020-10-20 09:24:03 -07:00
1eab0692b5
Fix missing `nproc` on macOS.
...
396979a
2020-10-20 16:39:32 +02:00
a2fce305d6
Replacing placeholder PIDs with correct PIDs
2020-10-20 10:42:14 +01:00
eb139c9bab
Correct pins to not reset.
...
They must have the PORT_ prefix otherwise they mask the wrong pins.
Fixes #3552
2020-10-19 17:41:16 -07:00
d606a3e968
Merge pull request #3484 from astrobokonon/esp32s2-morenet
...
Esp32s2: Expose more network parameters
2020-10-19 15:07:20 -07:00
d98b312886
Merge pull request #3541 from jepler/lto-parallel
...
atmel-samd: parallelize lto linking
2020-10-19 15:05:45 -07:00
d6805c0dd4
SDA and SCL were flipped
2020-10-18 17:15:59 -07:00
cc411f47eb
samd: Update peripherals submodule
...
(https://github.com/adafruit/samd-peripherals/pull/37 )
2020-10-17 20:08:32 -05:00
fb768dfc14
samd: AnalogOut: Better handle boards which IGNOREd analog pins
2020-10-17 20:08:32 -05:00
194d99f588
sparkfun_lumidrive: Can't IGNORE pins that are default bus pins
...
The SDA, SCL, and MISO pins were ignored. This error was not diagnosed
before now.
2020-10-17 20:08:32 -05:00
eb0b023dee
samd: extend IGNORE_PIN_foo to all sam e5x/e5x pins
2020-10-17 20:08:32 -05:00
4b9fc5de53
samd: update peripherals submodule
...
this is possible now that the undefined reference to pin_PA30 has been
resolved.
2020-10-17 20:08:32 -05:00
aa3c890ead
samd: pin: Fix 'undefined reference to pin_PA30'
...
.. when PA30 is IGNOREd
2020-10-17 20:08:32 -05:00
396979a67e
atmel-samd: parallelize lto linking
...
This decreases the link time, especially on desktop machines with many CPU
cores. However, it does come at a slight cost in binary size, making the flash
section about 200 bytes bigger for circuitplayground_express.
Before, linking build-circuitplayground_express/firmware.elf takes
8.8s elapsed time, leaving 3128 bytes free in flash.
After, linking build-circuitplayground_express/firmware.elf takes 2.8s elapsed
time, leaving 2924 bytes free in flash. (-6 seconds, -204 bytes free)
If necessary, we can make this per-board or even per-translation to squeeze full
builds.
2020-10-17 20:08:32 -05:00
76f1db7a87
Set sta_mode flag for actual use/checking
2020-10-17 00:23:31 -07:00
878f2322e7
Merge pull request #3564 from BHDynamics/dynossat_edu
...
Add DynOSSAT-EDU boards
2020-10-16 11:30:42 -07:00
6e355ec598
Merge pull request #3560 from dhalbert/pervasive-bleio-hci
...
enable CIRCUITPY_BLEIO_HCI on non-nRF boards where it will fit
2020-10-16 10:00:50 -07:00
6631c8d393
Add USB VID&PID
2020-10-16 13:52:46 +02:00
9d840aab0b
Cleaned up and now testing
2020-10-15 23:45:11 -07:00
b336039aab
Disable the long way and return an ap_info object
...
still needs work and cleanup
2020-10-15 23:18:30 -07:00
12ed3fc72f
disable on winterbloom_sol and thunderpack
2020-10-15 18:48:28 -04:00
6b272eeb27
Merge pull request #3555 from UnexpectedCircuitPython/main
...
Added default LWIP hostnames to FeatherS2 boards
2020-10-15 15:12:40 -07:00
31223e4ae5
Merge pull request #3530 from askpatrickw/hostname-example
...
Set default hostname
2020-10-15 15:11:58 -07:00
1d05ad6b22
no _bleio for litex; ESP32S2 defines BIT() already
2020-10-15 16:34:19 -04:00
45a3bd1c04
Added default LWIP hostnames to FeatherS2 boards
2020-10-16 06:47:59 +11:00
f51e75c1d2
cxd56 needed more precise include for __packed; needed SRC_C += on some ports
2020-10-15 15:24:24 -04:00
b67acea587
Merge pull request #3547 from microDev1/wifiHost
...
Add method to set custom hostname
2020-10-15 11:17:07 -07:00
82b49afe43
enable CIRCUITPY_BLEIO_HCI on non-nRF boards where it will fit
2020-10-15 11:27:21 -04:00
97fae54659
Add DynOSSAT-EDU boards
2020-10-15 12:39:14 +02:00
f1e8f2b404
Merge pull request #3554 from gamblor21/move_ordereddict
...
Moved ORDEREDDICT define to central location
2020-10-14 22:39:04 -04:00
0a9bcc538b
Removed ordered dict for all SAMD21
2020-10-14 20:15:21 -05:00
e6d0b207ec
Removed MICROPY_PY_COLLECTIONS_NAMEDTUPLE__ASDICT from unix coverage
2020-10-14 14:06:34 -05:00
cc8f8d8604
Merge pull request #3549 from tannewt/stm_alarm_tweak
...
Fix stm sleep too long
2020-10-14 11:12:26 -07:00
852a91e1b7
boards/bdmicro_vina_d51/pins.c: Fix illegal QSTR name (hyphen).
2020-10-14 08:29:28 -04:00
18fbff4f57
Update wifi hostname method
2020-10-14 11:11:59 +05:30
e9c04bc1f0
Merge pull request #3550 from bd34n/bdmicro_vina_d51
...
Add new board to atmel-samd port: bdmicro_vina_d51
2020-10-13 23:15:25 -04:00
4270061db4
Moved ORDEREDDICT define to central location
2020-10-13 18:52:27 -05:00
56427d9abe
Fix stm sleep too long
2020-10-13 14:02:29 -07:00
2b33968a1e
Add new board to atmel-samd port: bdmicro_vina_d51
2020-10-13 16:46:25 -04:00
3d21eec3cd
Merge pull request #3546 from tannewt/rtc_irq
...
Finer grained, per port tick locking
2020-10-13 13:39:32 -07:00
2bc40bcadf
Remove readreq when changing continuous
2020-10-13 10:15:34 -07:00
33dee4ae07
Merge pull request #3545 from tannewt/stm_rtc
...
Fix STM RTC read so it's atomic.
2020-10-13 10:10:50 -07:00
ceb531086e
Add method to set custom hostname
2020-10-13 14:22:02 +05:30
379e73af2e
Finer grained, per port tick locking
...
Fixes #3504 hopefully.
2020-10-12 18:43:21 -07:00
a0e5e961c5
Fix STM RTC read so it's atomic.
...
Fixes #3376
2020-10-12 17:43:25 -07:00
9de96786ad
Merge pull request #3538 from jepler/parallel-qstrlast
...
build: parallelize the qstr build steps
2020-10-12 15:52:43 -07:00
bb046f9983
Merge pull request #3540 from WarriorOfWire/async_syntax
...
__await__ magic method and async/await
2020-10-12 15:31:43 -07:00
638c7f7b57
Merge pull request #3514 from hierophect/esp32-analogout
...
ESP32-S2: AnalogOut
2020-10-12 15:08:50 -07:00
8ddbebd2c1
esp32s2: fix build after qstr rule changes
2020-10-12 13:35:15 -05:00
10badd93c3
leftover newlines
2020-10-11 22:52:27 -07:00
94beeabc51
remove unnecessary board configuration and address feedback
2020-10-11 22:42:59 -07:00
3c46e3a6aa
Turn off async for circuitplayground express
...
Firmware too large
2020-10-11 08:16:36 -07:00
60deb321d1
adding USB PID VID
2020-10-10 23:55:05 +01:00
f5f1e29dc0
disable async/await on a several small ucontrollers
2020-10-10 15:43:12 -07:00
5721cf0710
tidying up board names
2020-10-10 22:42:24 +01:00
ead0d51fd7
Commenting out Neopixel in pins.c
2020-10-10 22:22:01 +01:00
74954286f0
Putting the Saola Wrover files back and adding my Wrover board files this time
2020-10-10 21:44:14 +01:00
f38e868e90
Actually adding Wrover board files this time
2020-10-10 21:28:26 +01:00
b9e308c248
Adding Wroom and Wrover board files
2020-10-10 21:11:06 +01:00
70a94c8d2d
fix for https://github.com/adafruit/circuitpython/issues/3534
2020-10-10 12:27:35 -04:00
c7d87cea62
Merge pull request #3532 from tannewt/samd21_autoreload
...
Fix autoreload on SAMD21
2020-10-09 14:49:48 -07:00
b435ef0272
Merge remote-tracking branch 'upstream/main' into esp32-analogout
2020-10-09 17:19:46 -04:00
375676ff58
Merge pull request #3501 from hierophect/esp32-analogin
...
ESP32S2: Add AnalogIn
2020-10-09 14:10:24 -07:00
699f19f44a
Merge pull request #3522 from tannewt/imx_metro
...
Unify iMX RT flash config and add Metro M7 1011
2020-10-09 13:48:58 -07:00
3ccf644dd0
Fix autoreload on SAMD21
...
The issue was that a time.sleep() would set the RTC wake up
further into the future even if we wanted to tick every ms. Ticking
every ms is used to time the autoreload delay and without it,
autoreload doesn't work.
Fixes #3528
2020-10-09 12:53:00 -07:00
ccbc15046a
Fix submodule issue
2020-10-09 13:29:35 -04:00
506936ea2e
Merge pull request #3525 from UnexpectedCircuitPython/UM_S2_Boards
...
Fixed the FeatherS2 prerelease hardware name
2020-10-09 10:20:13 -07:00
2b2003f3e7
Set default hostname
2020-10-08 22:46:10 -07:00
b578afa02f
Merge pull request #3523 from tannewt/ble_connectionerror
...
Replace _bleio.ConnectionError with the native version
2020-10-08 13:00:06 -07:00
99f27bea61
Merge branch 'main' of https://github.com/adafruit/circuitpython into esp32s2-morenet
2020-10-08 12:43:52 -07:00
5af1e054a7
Fix strange merge submodule edit
2020-10-08 14:57:41 -04:00
b5f8321d37
Merge branch 'esp32-analogin' into esp32-analogout
2020-10-08 12:42:00 -04:00
97d217a764
Merge remote-tracking branch 'upstream/main' into esp32-analogin
2020-10-08 12:34:58 -04:00
4bec77652b
Merge pull request #3519 from hathach/fix-idf-latest
...
fix espressif latest idf
2020-10-08 12:22:24 -04:00
e1fc85c56b
fix usb issue with latest idf
2020-10-08 13:30:32 +07:00
d93a1961c4
Fixed the FeatherS2 prerelease hardware name
2020-10-08 14:03:16 +11:00
9fcf96cb64
Replace _bleio.ConnectionError with the native version
...
Replace uses of _bleio.ConnectionError with regular ConnectionError
Fixes #3008
2020-10-07 17:11:32 -07:00
ef42d6bb6c
Update USB PID
2020-10-07 16:12:07 -07:00
09bc415751
Unify iMX flash config and add Metro M7 1011
...
This unifies the flash config to the settings used by the Boot ROM.
This makes the config unique per board which allows for changing
quad enable and status bit differences per flash device. It also
allows for timing differences due to the board layout.
This change also tweaks linker layout to leave more ram space for
the CircuitPython heap.
2020-10-07 15:23:47 -07:00
085d2a2274
Update submodule to merge commit
2020-10-07 14:09:26 -05:00
b7ed18d622
change idf to espressif
...
fix hal includes
2020-10-08 00:52:00 +07:00
9ac0aae5a9
Merge remote-tracking branch 'upstream/main' into esp32-analogout
2020-10-07 12:21:04 -04:00
7386a948bd
Merge remote-tracking branch 'upstream/main' into esp32-analogin
2020-10-07 12:20:30 -04:00
16ed875f4e
canio: remove unused fields
...
these relate to properties that were removed as well
2020-10-06 20:14:50 -05:00
81d7ef0256
stm: canio: remove stray optimization flag for debugging
2020-10-06 20:13:23 -05:00
eed3387f4e
stm32: canio: Fix message cancellation
...
.. it's necessary to wait for a cancellation request to actually free
the respective Tx mailbox
2020-10-06 20:12:10 -05:00
abe0405d6e
stm32: canio: Fix canio.CAN.restart()
2020-10-06 20:12:06 -05:00
e5a0af9216
stm32: canio: When Tx mailboxes are full, cancel an old message
...
.. also add the 8ms wait for transmission that the atmel sam port
has
2020-10-06 20:11:58 -05:00
a7dccb39a4
stm32: canio: remove unused functions
2020-10-06 20:11:51 -05:00
23bd2496de
stm32: canio: remove some unneeded declarations
2020-10-06 20:11:43 -05:00
7df01d3fbd
stm32: canio: enable on all stm32f405 boards
2020-10-06 20:11:39 -05:00
01e9e355ce
canio: implement for stm32f405
...
The has successfully run my loopback self-test program for CAN,
which tests transmission, reception, and filtering. The 1M baud rate setting
was also verified on saleae to be accurate.
2020-10-06 20:11:35 -05:00
8c428a3bdd
Merge pull request #3492 from hierophect/esp32-update-idf
...
ESP32S2: move to official IDF submodule
2020-10-06 16:53:32 -07:00
d5c8e55769
Add AnalogIO
2020-10-06 15:13:50 -04:00
68cb384f8f
Remove logging from shared-bindings, fix translations, revert config target macro
2020-10-06 13:29:12 -04:00
f90eb23db1
Merge branch 'esp32-update-idf' into esp32-analogin
2020-10-06 12:52:40 -04:00
0d7552b67e
Update ESP-IDF to newer fixed fork
2020-10-06 12:48:28 -04:00
5c00ba8592
Removed hardware APA settings from mpconfigboard.h because they make the APA flicker on boot. I need to look into why, but I don't think they are being used for anything right now anyway.
2020-10-06 07:40:20 +11:00
e93a274f2f
Merge branch 'main' into esp32-analogin
2020-10-05 13:02:42 -04:00
0467a82880
Fix/remove various style issues
2020-10-05 13:00:42 -04:00
a8dfae58d9
Add ADC calibration module support
2020-10-01 17:17:39 -04:00
d62ac24493
Merge pull request #3469 from jepler/noreturn
...
Add some NORETURN attributes
2020-10-01 11:18:36 -07:00
2ad54f8413
Merge pull request #3463 from UnexpectedCircuitPython/UM_S2_Boards
...
Updated UM FeatherS2 boards
2020-10-01 10:56:55 -07:00
9a3bd82f40
Update TinyUSB include compatibility
2020-10-01 13:19:54 -04:00
0bbd067a17
Revert ADC calibration removal, complete merge
2020-10-01 13:06:48 -04:00
c624c1e838
Merge branch 'esp32-update-idf' into esp32-analogin
2020-09-30 16:51:19 -04:00
e01e8dd6b9
Revert HAL refactor changes to avoid USB breaking changes past esp-idf dde6222cd
2020-09-30 16:36:13 -04:00
a739d314f1
Add Metro ESP32S2
...
Also fix two bugs:
* Crash when resetting board.SPI when it hasn't been inited.
* Reading back the output value is always false. Fixes #3353
2020-09-30 12:57:39 -07:00
7f803c0b51
Merge pull request #3489 from astrobokonon/esp32s2-fixconnection
...
ESP32S2: Enter station mode before connecting
2020-09-30 12:16:15 -07:00
5ac3c36d64
Merge pull request #3450 from mdroberts1243/New_quirk_for_SH1107
...
New quirk for sh1107
2020-09-30 12:03:10 -07:00
a09a158ddc
Fix trailing line
2020-09-30 11:36:51 -07:00
66b8559fd4
Change submodule, rework all includes
2020-09-30 11:26:07 -04:00
c129c8f296
Merge remote-tracking branch 'origin/main' into canbus-api-changes
2020-09-29 20:15:11 -05:00
819b5faa71
Removed ProS2 board files for now
2020-09-30 10:23:54 +10:00
4b1a7d812e
Updated UM boards
2020-09-30 10:16:24 +10:00
a2a0aa058f
Updated UM boards
2020-09-30 10:13:05 +10:00
2f6d7c9002
Make sure you're a STA before connecting
2020-09-29 13:41:56 -07:00
2bb44f6c4d
Merge pull request #3486 from microDev1/fixTranslate
...
Update make translate script
2020-09-29 14:32:49 -05:00
611f81ac1a
canio: actually drop the _error_count properties
...
thanks @tannewt
2020-09-29 14:25:53 -05:00
4c7d9e3aaf
Update make translate script
2020-09-29 11:14:30 +05:30
d4ee440a91
Merge pull request #3475 from tannewt/esp_uf2
...
Reorganize sdkconfigs and release UF2s
2020-09-28 20:39:37 -05:00
2a4a244245
Add ap_ssid and ap_bssid
2020-09-28 17:25:09 -07:00
dd6e7f5a8a
mimxrt10xx: Add required header for NORETURN definition
2020-09-28 18:56:01 -05:00
1dbb59271c
esp32: Use esp_restart from reset_to_bootloader; redeclare it NORETURN
2020-09-28 18:56:01 -05:00
726dcdb60a
Add some NORETURN attributes
...
I have a function where it should be impossible to reach the end, so I put in a safe-mode reset at the bottom:
```
int find_unused_slot(void) {
// precondition: you already verified that a slot was available
for (int i=0; i<NUM_SLOTS; i++) {
if( slot_free(i)) {
return i;
}
}
safe_mode_reset(MICROPY_FATAL_ERROR);
}
```
However, the compiler still gave a diagnostic, because safe_mode_reset was not declared NORETURN.
So I started by teaching the compiler that reset_into_safe_mode never returned. This leads at least one level deeper due to reset_cpu needing to be a NORETURN function. Each port is a little different in this area. I also marked reset_to_bootloader as NORETURN.
Additional notes:
* stm32's reset_to_bootloader was not implemented, but now does a bare reset. Most stm32s are not fitted with uf2 bootloaders anyway.
* ditto cxd56
* esp32s2 did not implement reset_cpu at all. I used esp_restart(). (not tested)
* litex did not implement reset_cpu at all. I used reboot_ctrl_write. But notably this is what reset_to_bootloader already did, so one or the other must be incorrect (not tested). reboot_ctrl_write cannot be declared NORETURN, as it returns unless the special value 0xac is written), so a new unreachable forever-loop is added.
* cxd56's reset is via a boardctl() call which can't generically be declared NORETURN, so a new unreacahble "for(;;)" forever-loop is added.
* In several places, NVIC_SystemReset is redeclared with NORETURN applied. This is accepted just fine by gcc. I chose this as preferable to editing the multiple copies of CMSIS headers where it is normally declared.
* the stub safe_mode reset simply aborts. This is used in mpy-cross.
2020-09-28 18:55:56 -05:00
7b7ef8edde
Merge branch 'main' of https://github.com/adafruit/circuitpython into esp32s2-morenet
2020-09-28 16:50:02 -07:00
66d55738c1
Enable DNS info
2020-09-28 16:49:20 -07:00
b1e1237887
Merge branch 'main' into New_quirk_for_SH1107
2020-09-28 19:40:47 -04:00
f4e36fc7f6
CAN: Use mp_obj_t insteaed of canio_message_obj_t, get rid of rtr field
2020-09-28 17:22:00 -05:00
3e97e9c4be
canio: Listener: shuffle function declarations around
2020-09-28 17:22:00 -05:00
48bda589b8
Listerner: read -> receive, drop readinto
...
This prepares for creating a separate RemoteTransmissionRequest class
2020-09-28 17:22:00 -05:00
79ca430ddf
Match: address -> id
2020-09-28 17:22:00 -05:00
abdbbf9e24
One grep
2020-09-28 15:10:12 -07:00
128b4a013b
Add non-calibrated ADC
2020-09-28 12:11:08 -04:00
96323ac3ac
Default power on Wio Terminal's 40 Pin
2020-09-27 10:21:25 +08:00
b9968ea801
Merge branch 'main' of https://github.com/adafruit/circuitpython into esp32s2-morenet
2020-09-26 13:37:14 -07:00
791d20f16c
give qtpy haxpress its own USB PID
2020-09-26 11:45:53 -05:00
9944935fde
qtpy haxpress: enable RTC
2020-09-26 11:33:10 -05:00
22a7696fac
Changes take 2: missed ugame10 board
2020-09-25 22:17:59 -04:00
b921543571
Requested changes take 1
2020-09-25 21:27:29 -04:00
eadb4de144
qtpy_m0_haxpress: add
2020-09-24 16:58:24 -05:00
dd86cb00ad
Merge pull request #3448 from hierophect/esp32-sd-fix
...
ESP32S2 - Fix SPI's SD card issue, add pin protections
2020-09-23 12:30:01 -07:00
bcabf5e019
Merge pull request #3457 from ladyada/qtpy_m0
...
fix pins for rev C
2020-09-23 11:31:28 -07:00
00517b2600
Move missing pin warning to shared-bindings
2020-09-23 11:39:39 -04:00
9db7625717
neopix is default on!
2020-09-23 11:19:01 -04:00
5384479a61
fix pins for rev C
2020-09-22 23:28:23 -04:00
98185e914b
Merge pull request #3425 from jepler/canbus
...
canio: Initial implementation for SAM E5x MCUs
2020-09-22 12:39:52 -07:00
59580d0f2d
canio: Fix implementation bugs in atmel-sam
2020-09-22 09:36:29 -05:00
add230b4da
Update port.c
2020-09-22 11:37:12 +05:30
a77966a736
Try to reuse/share existing objects
2020-09-21 21:36:46 -07:00
2fa269ccbc
Additional error handling
2020-09-21 20:56:03 -07:00
4869dbdc67
canio: rename from _canio
...
This reflects our belief that the API is stable enough to avoid incompatible changes during 6.x.
2020-09-21 16:44:26 -05:00
9e8f1820c8
canio.CAN: switch rx/tx, make both mandatory, move declarations around
2020-09-21 16:44:26 -05:00
4e4853dcb2
common.template.ld: remove unneeded line
2020-09-21 16:44:26 -05:00
df379b84cb
remove unneeded symbols
2020-09-21 16:44:26 -05:00
7fd6cab2ac
canio: Make both tx and rx (but not both) optional
...
.. loopback and silent come from the (optional) constructor parameters
not guessing based on the pin specification
.. docstring & comment improvements
2020-09-21 16:44:26 -05:00
09f8a83a75
samd: template.ld: put canram in its own output section
2020-09-21 16:44:26 -05:00
a76119afcb
add _canio to Feather M4 CAN
2020-09-21 16:44:26 -05:00
67d8f108bb
Add CAN to SAM E51 clock config
2020-09-21 16:44:26 -05:00
44c5b2bbb1
Respond to review comments
...
Thanks @tannewt!
2020-09-21 16:44:26 -05:00
58b920ed97
fix whitespace
2020-09-21 16:44:26 -05:00
27cbb690e5
_canio: Add listener matching
...
Lightly tested:
* no matches (catch-all)
* standard address single address matches (even and odd positions)
* standard address mask matches
* only tested that extended doesn't match non-extended
2020-09-21 16:44:26 -05:00
635fcadb59
_canio.CAN: add error handling & bus state
2020-09-21 16:44:26 -05:00
a2e1867f69
_canio: Minimal implementation for SAM E5x MCUs
...
Tested & working:
* Send standard packets
* Receive standard packets (1 FIFO, no filter)
Interoperation between SAM E54 Xplained running this tree and
MicroPython running on STM32F405 Feather with an external
transceiver was also tested.
Many other aspects of a full implementation are not yet present,
such as error detection and recovery.
2020-09-21 16:44:26 -05:00
183649aad8
samd: move mcu_find_pin_function to header
...
.. it'll be used in can as well as sdio
2020-09-21 16:44:07 -05:00
22d9a94f2b
Use write_value, add missing pin exceptions
2020-09-21 13:47:14 -04:00
c963771b4b
Merge pull request #3445 from microDev1/boardInfo
...
Update microS2 config files
2020-09-21 10:33:38 -07:00
40ec7a66e4
Update microS2 config files
2020-09-21 14:39:31 +05:30
ce266425e1
Merge pull request #3441 from hierophect/stm32-rgbmatrix-crashfix
...
STM32: Add never_reset reservation to RGBMatrix init
2020-09-20 07:51:09 -05:00
bc8863a3c7
Simplify now that I have it working
...
still need to figure out the bound method business
2020-09-19 21:04:07 -07:00
04ffd0dca0
Add gateway, subnet, and rssi info for current connected AP
...
ap_rssi is a bound method, which I'm not keen on, but it works
2020-09-19 13:38:04 -07:00
9cc803eb95
Merge pull request #3432 from bd34n/rename-bdmicro-vina-m0-d21
...
Rename board bdmicro_vina_m0 to bdmicro_vina_d21 and update boardfiles.
2020-09-19 13:41:21 -04:00
b28b31196d
Merge pull request #3438 from nitz/patch-1
...
[Makerdiary nRF52840 M.2 Devkit] Add SDA & SDL, RX & TX to pins.c
2020-09-18 21:51:22 -04:00
dfd09bba57
Merge pull request #3433 from astrobokonon/esp32s2-bssid
...
ESP32S2: Allow connecting to specific bssid
2020-09-18 21:31:15 -04:00
8cf0171c06
Merge pull request #3431 from hierophect/stm32-spi-writevalue
...
STM32: Change SPI Read to acknowledge write_value
2020-09-18 19:46:21 -04:00
5116375604
Merge pull request #3436 from jepler/fix-spi-sercom4
...
samd: SPI: improve conditional code
2020-09-18 19:14:39 -04:00
23dd7c7c96
Merge pull request #3435 from jepler/fix-sdhc1
...
sdioio: fix code for the case where there is no SDHC1
2020-09-18 17:10:59 -04:00
8d6a28a9ff
Update user button names.
2020-09-18 17:01:44 -04:00
550b42e4d3
Merge pull request #3434 from jepler/same54-disable-cpu-voltage
...
sam e54: disable microcontroller.cpu.voltage
2020-09-18 15:20:43 -04:00
5249a228a0
More pin names cleanup.
2020-09-18 14:27:00 -04:00
3a59d30e1a
Remove timer debug messages
2020-09-18 12:48:15 -04:00
c58bd4c047
Add never_reset reservation to RGBMatrix init
2020-09-18 12:38:15 -04:00
db078922e4
Removed TXD/RXD, fixed whitespace.
2020-09-17 21:32:19 -04:00
be3e478fce
Add SDA & SDL, RX & TX to pins.c
...
Despite the [silk on the dock board](https://wiki.makerdiary.com/nrf52840-m2-devkit/resources/nrf52840_m2_devkit_hw_diagram_v1_0.pdf ), the SDA/SCL pins weren't defined. Though, they were already defined in `mpconfigboard.h`.
Same for RX/TX. It looks like it declared `TXD` and `RXD`, so I didn't want to remove those, but I think it makes sense to have the "standard" pin names, but I moved ithem to illustrate they were all referencing the same pins.
I mimicked the whitespace I saw in the metro_nrf52840_express port.
2020-09-17 20:46:59 -04:00
45eec5b5a5
samd: SPI: improve conditional code
...
I recently misdiagnosed a "maybe-uninitialized" diagnostic as a bug in
asf4. However, the problem was in our SPI code.
A special case for samr21 MCUs was being applied to same54p20a and possibly
other D5x/E5x MCUs, since the check was simply for pin PC19 existing at all.
Change the check to use the macro PIN_PC19F_SERCOM4_PAD0 which is only
defined if special function F of pin PC19 is SERCOM4 PAD0.
Reorganize the code a little bit so that brace-matching in editors is
not confused by the conditionalized code, including an unrelated change
for APA102_SCK's condition.
Revert the change to the Makefile that incorrectly attempted to silence
the diagnostic.
2020-09-17 18:30:22 -05:00
c73182803d
sdioio: fix code for the case where there is no SDHC1
...
.. it doesn't really make a difference (the old code created an empty
else{} statement) but this is more correct.
2020-09-17 18:29:31 -05:00
1b29ceaf1a
sam e54: disable microcontroller.cpu.voltage
...
This hangs, and the usual workarounds didn't work.
2020-09-17 18:27:43 -05:00
17bdc969db
Reorganize sdkconfigs and release UF2s
2020-09-17 16:01:23 -07:00
1805e92038
Add else case for non-bssid usage
2020-09-17 15:04:27 -07:00
7f60ebd6c7
Merge pull request #3426 from tannewt/esp_flash_sizes
...
Add partition layouts for 8 and 16 MB as well.
2020-09-17 13:27:58 -07:00
4b827b25ad
Merge pull request #2966 from sommersoft/ci_check_vid_pid
...
Automate USB VID/PID Uniqueness Check
2020-09-17 11:48:46 -07:00
9cf9441ba6
Merge pull request #3393 from tannewt/fix_spi_psram
...
Add non-DMA SPI support.
2020-09-17 11:11:56 -07:00
78338ac12b
Merge pull request #3417 from hierophect/esp32s2-readme
...
ESP32S2: Add Readme
2020-09-17 10:58:17 -07:00
1e3241ec6d
Merge branch 'main' into esp32s2-bssid
2020-09-16 17:15:01 -07:00
lady ada
Lucian Copeland
Dan Halbert
Brian Dean
ITACA Innovation S.R.L
microDev
Jerry Needell
Dan Halbert
Scott Shawcroft
Scott Shawcroft
Gaetan
Noel Gaetan
Jeff Epler
Jeff Epler
Ryan T. Hamilton
Christian Walther
Targett363
askpatricw
Enrique Casado
Seon Rozenblum
gamblor21
Kenny
Kenny
hathach
mdroberts1243
Anson He
nitz
Ryan T. Hamilton