66efed5ba5
fix AuthMode printing regression
2022-12-15 15:49:58 -05:00
297657ea9a
Refactor so that all sites of name lookup failure result in gaierror
2022-12-14 14:45:32 -06:00
243ecc2502
remove debugging prints
2022-12-08 14:18:22 -06:00
1fe05cb8cd
pico w: re-use previous connection if ssid matches
2022-12-08 12:44:34 -06:00
d7874e65c2
Merge pull request #7299 from BooleanMattock/main
...
Fix to Issue #7224 - Servo update slow due to PWM channel duty cycle update busy-wait
2022-12-05 12:54:41 -08:00
afb5301cef
Fix to Issue #7224 - tested
2022-12-02 20:21:40 -05:00
4c064c263e
Merge pull request #7294 from tannewt/analogbufio_rework
...
Rework the analogbufio API.
2022-12-02 14:53:16 -08:00
f7504ff857
Tweaks based on review comments
2022-12-02 10:19:31 -08:00
255e997345
Rework the analogbufio API.
...
* read() is now readinto() and takes the buffer to write into.
* readinto() returns the number of valid samples.
* readinto() can be interrupted by ctrl-c.
* readinto() API doesn't support signed numbers because it never did.
* sample_rate is now required in the constructor because supported
values will vary per-port.
* 16 bit values are full range. 12 bit samples from RP2040 are stretched
in the same way they are for AnalogIn.
Fixes #7226
2022-12-01 17:46:07 -08:00
f8070d2141
Change comment, and logic on dhcpserver
2022-11-30 21:51:50 +02:00
44d5326d4c
fix picow-ap
2022-11-30 19:36:00 +02:00
362018dcca
Merge branch 'main' into picow-ap
2022-11-30 19:11:03 +02:00
c13ca95da1
Add MDNS support to Pico W
...
This adds both cpy-MAC.local and circuitpython.local support.
Fixes #7214
2022-11-28 16:15:28 -08:00
ad2d190507
Merge pull request #7247 from tannewt/picow_web_workflow
...
Enable* web workflow for Pico W
2022-11-28 14:19:42 -08:00
17be447c4b
correct Radio.connect() and .start_ap() signatures; clean up some code
2022-11-22 17:11:03 -05:00
c3a96a63c0
Enable* web workflow for Pico W
...
* Except for circuitpython.local which depends on MDNS and will be
done in a follow up PR.
Progress on #7214
2022-11-21 16:24:05 -08:00
b40facd0b4
Error msg changes
2022-11-22 01:00:34 +02:00
1611cf98da
have clock start high in SPI mode 3
2022-11-18 18:27:38 -05:00
88bd9ef6b8
just change the ap error
2022-11-18 22:51:05 +02:00
b8cd6c093f
picow-ap progress
2022-11-17 21:47:39 +02:00
a234b74e87
Merge branch 'adafruit:main' into picow-ap
2022-11-16 21:32:46 +02:00
ef93eda0a0
Merge pull request #7192 from bill88t/picow-debug
...
Fix pi cow debug compilation
2022-11-15 14:08:44 -06:00
6954e569b7
since it ain't leaving..
2022-11-15 00:05:01 +02:00
6ad61a3fd1
Radio.c work
2022-11-14 19:31:18 +02:00
2e6dd1bf1f
Radio.c no longer needs ping.h
2022-11-14 18:36:42 +02:00
cdab078d9d
shared-bindings: Get rid of CYW43 special cases in shared-bindings
...
.. by moving it into a new weak function that can be replaced
just by the picow build.
2022-11-14 08:44:08 -06:00
8f414eb4ee
Merge pull request #7179 from jepler/picow-voltage-monitor
...
Add ability to read VOLTAGE_MONITOR on Pico W
2022-11-13 22:40:54 -05:00
983502d6e3
ignore pin changes before sleep
2022-11-11 15:31:49 -05:00
e6a4e2982f
Update ports/raspberrypi/common-hal/wifi/Radio.c
...
u32_t -> uint32_t
Co-authored-by: MicroDev <70126934+MicroDev1@users.noreply.github.com>
2022-11-11 14:40:47 +02:00
0bf9df232a
fix debug
2022-11-11 14:17:57 +02:00
851c2cd8cb
picow: Add channel setting when starting AP
2022-11-10 17:23:59 +02:00
25c0a0aca9
Merge branch 'adafruit:main' into picow-ap
2022-11-10 17:04:21 +02:00
7f36a365cf
delay 100us for analog voltage to stabilize
...
.. otherwise, depending on the prior state of the pin as a digital
input, the value read could be 20% low.
2022-11-08 10:43:14 -06:00
09f6919c93
Add ability to read VOLTAGE_MONITOR on Pico W
...
Because this must be treated like an in-use pin for all other purposes,
unfortunately a special case must be added in shared-bindings.
Multiple AnalogIn objects for VOLTAGE_MONITOR can be created (because
in use tracking isn't working) but this causes no harm.
Testing performed: Read the monitor, then imported wifi. When the
pin state was insufficiently restored, the second step would fail
with debug messages about do_ioctl timeout.
```
import analogio, board
a = analogio.AnalogIn(board.VOLTAGE_MONITOR)
print(a.value)
import wifi
```
Closes : #7020
2022-11-08 09:37:15 -06:00
452ebe27ae
socketpool: make socket objects selectable
...
.. which will lead to them being usable in async contexts, pending
relevant changes in asyncio
2022-11-05 12:05:19 -05:00
ded134c346
store wake_alarm in a static object
2022-10-29 16:26:36 -04:00
0221cc8df7
Merge remote-tracking branch 'adafruit/main' into alarm-lifetime
2022-10-28 14:11:32 -04:00
4e20049c38
Merge pull request #7122 from jepler/picow-ssl-server
...
pico w: implement sslsocket bind, listen, accept
2022-10-28 09:33:21 -04:00
9307b62ad5
wip
2022-10-27 22:42:04 -04:00
0cf096dda1
pico w: implement sslsocket bind, listen, accept
2022-10-25 14:46:41 -05:00
f997d0053d
Enable, use SOF_REUSEADDR
...
This is the lwip no-os version of SO_REUSEADDR, which is set on all
listening sockets in the espressif port; do so here as well,
it makes running servers easier. The "address in use" error does
not occur.
2022-10-25 10:09:16 -05:00
7a50beb67e
PicoW more ap work
2022-10-22 11:58:44 +03:00
8cc536bb7f
PicoW start_ap()
2022-10-21 13:20:16 +03:00
b33a2b45dc
add coproc alarm
2022-10-20 18:38:20 +05:30
7015b7396e
Merge pull request #7089 from jepler/picow-gpio-number
...
pico w: Disentangle "TOTAL_GPIO_COUNT", it's complicated
2022-10-19 22:42:16 -04:00
576a1ac700
pico w: Disentangle "TOTAL_GPIO_COUNT", it's complicated
...
You might wonder how this fixes a problem with PulseIn, when the
changes aren't to any of those files! PulseIn is implemented in terms of
StateMachine, which had some assumptions about the relation between
the index of a pin object in mcu_pin_global_dict_table and its "pin
number". This was true, until some pins were removed from the
microcontroller module on Pico W.
Closes : #7078
2022-10-19 21:09:50 -05:00
8bef4282c0
pico w: implement static configuration methods in wifi.Radio
2022-10-19 20:54:53 -05:00
08e1cdb282
Merge pull request #7079 from jepler/picow-2xmss
...
Pico W grab bag
2022-10-19 15:03:00 -04:00
6e350a65cf
Merge pull request #7076 from bill88t/early-wifi
...
Implement async wifi connection on picow
2022-10-17 19:54:58 -05:00
3b7feccd9b
picow: Implement stop_station
...
Weirdly we have to stop the AP too (which we never started),
or cyw43_tcpip_link_status still reports that STA is connected.
As long as AP mode isn't implemented, this doesn't matter and
we can just do it.
2022-10-17 19:42:10 -05:00
Dan Halbert
Jeff Epler
Scott Shawcroft
BooleanMattock
Bill Sideris
Dan Halbert
paul-1
microDev