57fde2e07b
sdcardio: implement new library for SD card I/O
...
Testing performed: That a card is successfully mounted on Pygamer with
the built in SD card slot
This module is enabled for most FULL_BUILD boards, but is disabled for
samd21 ("M0"), litex, and pca10100 for various reasons.
2020-06-26 11:50:23 -05:00
1d2cc0b968
I2CPeripheral: Rename class and its module
...
This is an incompatible change.
2020-06-25 11:44:19 -05:00
33496e9c68
Add nice!nano board support
2020-06-05 19:58:54 -05:00
dd5d7c86d2
Fix up end of file and trailing whitespace.
...
This can be enforced by pre-commit, but correct it separately to make it easier to review.
2020-06-03 10:56:35 +01:00
9380c34cf7
Merge remote-tracking branch 'adafruit/master' into wdt-nrf
2020-05-27 10:47:08 -07:00
d06a7c4671
Correct HiiBot BlueFi USB_PID
...
Donated a PID set for HiiBot BlueFi.
2020-05-27 11:47:15 -04:00
d0f1b59be5
nrf: pca10100: disable some unused features to shrink image
...
This removes some features that are largely unused in order to get the
image to fit.
Recommended in
https://github.com/adafruit/circuitpython/pull/2933#issuecomment-632859678
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:50 +08:00
33001f4e19
nrf: simmel: shrink filesystem to fit watchdog timer
...
The watchdog timer has increased the amount of code and text that's
required.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:50 +08:00
0169ea5155
nrf: discard arm exception sections
...
Since these exceptions are unused, don't include them in the output
binary.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:49 +08:00
595f6387c2
watchdog: rename module from `wdt` and move to `microcontroller`
...
This also places it under the `microcontroller` object.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:49 +08:00
fbe1c05832
nrf: simmel: enable wdt support
...
This enables WDT support for Simmel. Other platforms cannot yet use
WDT because it overflows their flash storage.
Enable CIRCUITPY_WDT support for the nrf target.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:48 +08:00
17ef2df2ca
nrf: ld: add ARM.exidx to output image
...
With the WDT changes, building Circuit Python results in the following error:
/opt/gcc-arm-none-eabi-9-2019-q4-major/bin/../lib/gcc/arm-none-eabi/9.2.1/../../../../arm-none-eabi/bin/ld: section .ARM.exidx LMA [00000000000621c8,00000000000621cf] overlaps section .data LMA [00000000000621c8,0000000000062383]
This is because unwinding data is getting generated, but has nowhere to go.
Re-enable this data in the linker script so it is saved.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:48 +08:00
19f0d82048
Merge pull request #2955 from BradChan/master
...
Add hiibot_bluefi board definitions
2020-05-26 15:37:35 -04:00
f002c784c0
nrf: linker: add a new .uninitialized section
...
This section immediately follows the .bss section, and is designed to
contain uninitialized variables that should persist across reboots.
The section is placed directly after .bss, under the theory that the
size of Circuit Python's .bss + .data is bigger than the bootloader's
.bss + .data, so there is less likely to be a conflict.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-18 11:52:17 +08:00
4f7b4241a2
add hiibot_bluefi
2020-05-18 09:42:37 +08:00
ffaeeda749
nrf: simmel: decrease flash filesystem size
...
The flash filesystem must be reduced in order to allow the current
build to fit.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-12 09:31:51 +08:00
f7fcd43516
nrf: simmel: disable SPIM3
...
Disable the SPIM3 controller to avoid needing to dedicate 8 kB to
the SPIM3 block.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-12 09:31:51 +08:00
79c055f958
nrf: simmel: enable aesio
...
This adds AES support to simmel.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-12 09:31:51 +08:00
235098efb8
nrf: simmel: correct CSn pin
...
The CSn pin is pin 6 on bank 1, not bank 0.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-12 09:31:51 +08:00
62b835ad76
Merge pull request #2833 from xiongyihui/pitaya-go
...
add nRF52840 based Makerdiary Pitaya Go
2020-05-11 16:34:27 -07:00
bae7a5e433
make translate again
2020-05-04 17:26:59 -04:00
4d7e341e44
Merge pull request #2844 from xobs/add-nrf-pca10100
...
nrf: add pca10100
2020-05-04 10:51:01 -04:00
b128399d1e
nrf: simmel: enable CIRCUITPY_USB_HID
...
Simmel had USB HID disabled in order to save space. However, the board
configuration did not set USB_DEVICES, causing it to inherit the default
device bouquet of MSC,CDC,MIDI,HID. This in turn caused HID to be included
in the USB Configuration Descriptor.
For some reason, this was not a problem in an earlier version of tinyusb or
circuitpython. However, in the most recent version this has rightfully
caused asserts to appear during configuration.
Re-enable USB_HID for now, as it doesn't add too much in terms of space.
We may disable it again later on if we become pressed for space.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-04 15:37:53 +08:00
cb4fc894d7
nrf: add pca10100
...
This is the nRF52833-DK board.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-04 15:07:49 +08:00
7dd3ddc06b
use Nordic's VID which seems to be allowed
...
https://devzone.nordicsemi.com/f/nordic-q-a/50638/usb-pid-for-nrf52840
2020-05-01 06:10:43 +00:00
1ca90572f1
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-04-30 13:25:31 -07:00
74a2d0944a
Merge pull request #2834 from Teknikio/fix/bluebird_pinout
...
Update teknikio bluebird pin assignments
2020-04-30 11:50:02 -07:00
36a71560c2
update teknikio bluebird pin assignments
2020-04-30 09:58:27 -04:00
4393a88fb6
add nRF52840 based Makerdiary Pitaya Go
2020-04-30 07:38:20 +00:00
180f5c6a94
Merge remote-tracking branch 'adafruit/master' into ringbuf-fixes
2020-04-29 22:11:22 -04:00
a30ff70b4e
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-04-29 10:51:21 -07:00
1d0781bf12
nrf: add simmel board
...
This adds support for Simmel, an nRF52833-based bluetooth tracking
board designed to aid in pandemic tracing.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-29 11:40:00 +08:00
b9e494b85a
add submodule to TG-Watch02A
2020-04-28 00:03:02 -04:00
76b466a38a
add submodule to TG-Watch02A
2020-04-27 22:49:30 -04:00
755d404edf
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-04-27 16:45:10 -07:00
77cd93ac2d
merge from adafruit
2020-04-21 17:47:51 -04:00
38ec3bc574
further ringbuf cleanup
2020-04-21 17:38:20 -04:00
3ed5b87b8f
nrf: add support for nrf52833
...
This adds preliminary support for the nRF52833, which is a variant of
the nRF52840 with half the RAM, half the flash, and fewer peripherals.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-21 12:29:56 +08:00
b580b34cbf
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-04-14 17:14:44 -07:00
09dc46a984
Add Protomatter and FramebufferDisplay
2020-04-14 18:24:54 -05:00
8fe512c7e9
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-03-31 15:13:58 -07:00
54e8c63b4f
Merge pull request #2730 from tannewt/fix_fourwire_phase_polarity
...
Add polarity and phase to FourWire.
2020-03-28 07:28:37 -05:00
798118b74f
Update board.c's to remove remaining tick.h
2020-03-27 14:52:35 -07:00
b043384949
Update built in display init
2020-03-27 14:35:29 -07:00
9e0c00dfd4
adding a backlight polarity flag to Display
2020-03-25 22:51:20 -07:00
7bba79363a
allowing backlight change
2020-03-25 22:41:23 -07:00
85f44e20cb
Merge pull request #2695 from TG-Techie/master
...
Add new TG-Watch02A to the nrf boards directory
2020-03-13 10:46:48 -07:00
197dc344af
fix requested changes
2020-03-12 02:31:13 -04:00
b967a2071f
changed TG-Watch02A HW_BOARD_NAME
2020-03-10 23:07:25 -04:00
50b451ae0c
add TG-Watch02A board def
2020-03-10 22:40:55 -04:00
fec84054d9
ah
2020-03-06 15:03:37 -05:00
7198056bc3
Merge pull request #2 from adafruit/5.0.x
...
5.0.x
2020-03-06 13:57:31 -05:00
b6206406de
new pin validation routines; don't use mp_const_none if NULL will do
2020-02-28 23:43:04 -05:00
527eb2444c
added TG-Watch02A pins
2020-02-28 04:11:54 -05:00
6d4ffc69fd
add TG-Watch02A
2020-02-28 02:52:46 -05:00
86e9fd170a
move red LED to D13 and make D3 lsm6ds IRQ
2020-02-25 18:00:23 -05:00
e97b0cfc61
Merge pull request #2581 from jamesbowman/master
...
First draft of eveL, the low-level module of the Gameduino bindings
2020-02-13 11:21:32 -08:00
e00b3269fe
use properly-sized SPI transactions
2020-02-12 15:04:19 -05:00
2e029d55fc
nrf: add SPIM3 support
2020-02-11 19:22:14 -05:00
3bf4b42e2e
change OH20 badge pin defs to use SWn for buttons
...
Rather than use A, B, C and D
Use the buttons according to silkscreen references:
SW1
SW2
SW3
SW4
2020-02-10 00:49:13 +01:00
0a54f88751
add pin defs for buttons on the OHS2020 badge
2020-02-10 00:32:16 +01:00
acef93a253
Rename eveL to _eve, EVEL to _EVE
2020-02-05 18:17:58 -08:00
7fd30e7d20
First draft of eveL, the low-level module of the Gameduino (and BridgeTek EVE) bindings.
...
[adafruit/circuitpython#2578 ]
2020-02-03 16:46:14 -08:00
5a29b222eb
add bluefruit sense - tested
2020-02-03 13:52:30 -05:00
64cafe82bc
Adjust OHS2020 madctl for default rotation
...
Make to go faster I guess.
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-02-02 22:14:10 -08:00
6804b2a7fd
Add I2C pin definitions for interoperability with Adafruit libraries
...
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-02-02 22:13:39 -08:00
33dcdd7c03
Updates to enable working SPI TFT
...
The backlight enable is active low on our board so the driver doesn't like it.
Toggling to GPIO manually for now.
As fixed the improper SPI bus pins definitions and it works!
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-02-02 22:13:03 -08:00
d99c2ffe4f
QSPI flash fixes
...
We had the pin names swapped on the schematic and a different flash was populated.
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-02-02 22:11:12 -08:00
dc964b346c
adjust CLUE madctl so rotation 0 is 'right'
2020-01-31 20:17:39 -05:00
be4e681d07
fix UICR check; do not use NULL for no MISO
2020-01-31 18:57:41 -05:00
4abd5f1f7b
increase max connections from 2 to 5
2020-01-31 14:58:23 -05:00
b6358182d3
Update CLUE to Rev C
2020-01-30 15:22:26 -05:00
df5e58fc6e
Add support for the Particle Ethernet FeatherWing
2020-01-28 10:53:50 +01:00
f2dfcee042
add missing displayref
2020-01-26 20:10:20 -05:00
68f9aee992
reset NeoPixels on CPB on soft reload
2020-01-23 20:16:31 -05:00
cc77e86408
Update the VID and USB company string
...
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-01-16 15:43:49 -08:00
cc03d68984
Fix backlight pin registration
...
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-01-16 14:53:07 -08:00
86d454adf3
Initial board support for OHS2020 Badge
...
Not tested but builds.
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-01-16 13:46:56 -08:00
4bf10a75c7
Add board definition files for AramCon Badge 2019
2020-01-16 00:44:18 +02:00
82fb761c0f
Add PacketBuffer and MTU negotiation support.
...
PacketBuffer facilitates packet oriented BLE protocols such as BLE
MIDI and the Apple Media Service.
This also adds PHY, MTU and connection event extension negotiation
to speed up data transfer when possible.
2020-01-03 17:29:54 -08:00
f0d34da556
add display support; rotation 270
2019-12-30 17:39:39 -05:00
3f9ebd2fed
initial CLUE board defn
2019-12-30 17:10:42 -05:00
2abccc1745
update vid and pid for teknikio_bluebird
2019-12-16 08:58:56 -05:00
32744a04e1
update bluebird make file
2019-12-13 09:08:21 -05:00
3992a870e5
Merge branch 'master' into teknikio/bluebird
2019-12-13 08:55:15 -05:00
4bee6536c9
updates to bluebird
2019-12-13 08:52:03 -05:00
b484c89b73
Merge pull request #4 from adafruit/master
...
Pull master
2019-12-13 08:51:06 -05:00
e11fabd5e0
moved nrf internal filesystem to just below bootloader
2019-12-12 14:57:23 -05:00
dde7c5e145
Merge branch 'master' of https://github.com/Teknikio/circuitpython
2019-12-12 08:59:37 -05:00
bf4138b0e4
Merge pull request #3 from adafruit/master
...
Pull master
2019-12-12 08:59:22 -05:00
0da5dceccf
update bluebird makefile
2019-12-11 15:25:16 -05:00
a273a7c55e
add remaining peripheral pin maps and digital/analog pin definitions
2019-12-11 15:23:16 -05:00
006d85d5c2
add make file and board configuration, add accelerometer pin mappings
2019-12-11 14:49:59 -05:00
d9ca4c9a60
fix build failures
2019-12-10 22:39:44 -05:00
c6221c5956
Remove no-longer-used nrf and atmel-samd .ld files
2019-12-10 21:22:17 -05:00
68ae47907c
merge from upstream
2019-12-10 21:04:46 -05:00
013c840862
working on all ports
2019-12-10 20:27:30 -05:00
60f399395a
Add POWER_SWITCH pin to CPB
2019-12-09 18:30:24 -05:00
40434d6919
wip
2019-12-05 22:45:53 -05:00
ba83a4a2ac
Merge pull request #1 from adafruit/master
...
Update base
2019-11-05 11:06:18 -05:00
8ab3ef44dd
add bluebird template files
2019-11-05 10:52:25 -05:00
8cd2f87e99
Merge pull request #2236 from tannewt/bleio_tweaks
...
Refine _bleio
2019-11-04 22:27:54 -05:00
e3638ffaad
Merge pull request #2262 from jepler/cpb-speaker-disable
...
cpb: Disable the onboard speaker until request
2019-11-03 18:34:29 -05:00
85a648224f
Check for no pullups on I2C on nrf; give arduino nano 33 ble two I2C devices
2019-11-02 22:47:03 -04:00
2bdccf03a7
cpb: define the SPEAKER_ENABLE_PIN
...
This allows the board to disable the onboard speaker until explicitly
enabled in user code.
Testing performed on a CPB:
* Touching the AUDIO pin with a fingertip no longer generates noise/buzz
* Generating a waveform with `simpleio.tone` produces no sound by default
* When the board.SPEAKER_ENABLE is configured as a digital output and
set True, `simpleio.tone` does produce sound
Note that while guides should include information about SPEAKER_ENABLE, it's
possible that some users who omitted it could view this as a breaking change.
They can fix it by simply adding code similar to
speaker_enable = digitalio.DigitalInOut(board.SPEAKER_ENABLE)
speaker_enable.direction = digitalio.Direction.OUTPUT
speaker_enable.value = True
before using the internal speaker.
Closes : #2258
2019-11-01 16:26:03 -05:00
47e50e5659
Merge remote-tracking branch 'adafruit/master' into bleio_tweaks
2019-11-01 13:20:58 -07:00
e35eb08f1d
nrf: allocate two I2C on CPB
2019-10-28 21:08:53 -04:00
358920db0e
Use MICROPY_PY_SYS_PLATFORM in mpconfigport.h only
2019-10-28 10:40:10 -04:00
1103490223
Merge pull request #2244 from dhalbert/itsybitsy_nrf52840_express
...
Initial Itsy nRF52840 defn
2019-10-27 16:46:28 -05:00
ab6fd34828
add object types to rgb status objects;mark spi rgb objects as never_reset
2019-10-25 22:32:43 -04:00
7d04d9109e
use bitbang SPI for DotStar; still need to fix hw SPI for dotstar
2019-10-25 15:37:27 -04:00
cdeb0857a9
Initial Itsy nRF52840 defn
2019-10-25 11:15:34 -04:00
ae30a1e5aa
Refine _bleio
...
This PR refines the _bleio API. It was originally motivated by
the addition of a new CircuitPython service that enables reading
and modifying files on the device. Moving the BLE lifecycle outside
of the VM motivated a number of changes to remove heap allocations
in some APIs.
It also motivated unifying connection initiation to the Adapter class
rather than the Central and Peripheral classes which have been removed.
Adapter now handles the GAP portion of BLE including advertising, which
has moved but is largely unchanged, and scanning, which has been enhanced
to return an iterator of filtered results.
Once a connection is created (either by us (aka Central) or a remote
device (aka Peripheral)) it is represented by a new Connection class.
This class knows the current connection state and can discover and
instantiate remote Services along with their Characteristics and
Descriptors.
Relates to #586
2019-10-21 18:57:03 -07:00
7b79ac3739
Parameterize linker script
2019-10-20 23:50:12 -04:00
fc19e03128
WIP: bonding
2019-10-06 21:30:26 -04:00
aa1eed3bd3
initial Arduino Nano 33 BLE board definition
2019-09-26 15:28:57 -04:00
3c22c690c8
CPB A1 pin mapping wrong; remove A7
2019-09-06 14:17:11 -04:00
0b7291d767
fix default crystal value; fix include order
2019-08-22 09:01:05 -04:00
acc6df4959
merge similar fix in
2019-08-22 01:29:34 -04:00
d94023e9b3
Fix CPBlue LFCLKSRC; CPB has no status neopixel
2019-08-22 01:04:00 -04:00
85d7398476
Merge pull request #2066 from dhalbert/ble-pairing
...
BLE: more features
2019-08-16 14:50:00 -07:00
5877bd6036
CPblue initial definition
2019-08-13 22:12:36 -04:00
243334da75
Merge remote-tracking branch 'adafruit/master' into ble-pairing
2019-08-05 23:06:24 -04:00
c56566179a
Metro nRF52840 rev A defn; also remove '#define FEATHER52840' from mpconfigboard.h files
2019-08-05 18:10:27 -04:00
28ca05ccdc
allow discovery from central or peripheral
2019-07-27 13:22:15 -04:00
a98bfa628e
Merge pull request #2002 from ntavish/blip_improvements
...
Blip improvements
2019-07-19 10:52:08 -07:00
724ce4acba
enable libraries needed by BlipBoy Shield
2019-07-19 18:48:08 +05:30
6fad383367
Merge pull request #1925 from C47D/rgb_status
...
Initial support for RGB led as Status indicator, fixes #1382
2019-07-09 10:31:34 -07:00
5610e05b8c
Fix up nrf so that it is initialized properly. Also, do not reset
...
it's pins.
2019-07-06 12:48:16 -07:00
4a7122d354
boards: add support for Electronut labs Blip
...
Signed-off-by: Tavish Naruka <tavishnaruka@gmail.com>
2019-06-05 00:49:29 +05:30
c0ce820974
Merge pull request #1803 from nickzoic/circuitpython-nickzoic-1042-nrf-nvm-bytearray-3
...
Circuitpython nickzoic 1042 nrf nvm bytearray 3
2019-04-16 15:05:18 -04:00
32a0855d18
Add support for Electronut Labs Papyr.
...
Signed-off-by: Tavish Naruka <tavishnaruka@gmail.com>
2019-04-16 12:59:42 +05:30
02dd32da60
Make some space for NVM adafruit/circuitpython#1042
2019-04-16 14:53:44 +10:00
d0e5af3b09
Working flash pages for nvm.ByteArray adafruit/circuitpython#1042
...
import microcontroller
def dump(n = microcontroller.nvm):
for i in range(0,len(n)):
print ("%02X " % n[i], end="")
if i % 16 == 15: print('')
microcontroller.nvm[0:4096] = bytes([1,2,3,4,5,6,7,8]) * 512
microcontroller.nvm[4096:8192] = bytes([16,17,18,19]) * 1024
microcontroller.nvm[4090:4101] = b'thisisatest'
microcontroller.nvm[100:105] = b'hello'
microcontroller.nvm[8000:8007] = b'goodbye'
dump()
2019-04-16 14:53:44 +10:00
933500c448
nvm.ByteArray reads & writes but no sensible erase yet adafruit/circuitpython#1042
2019-04-16 14:53:44 +10:00
df89156f2f
Start on nRF nvm.ByteArray adafruit/circuitpython#1042 (doesn't do anything yet)
2019-04-16 14:53:44 +10:00
254d0a53ac
Revert "nrf nvm: touchups to nickzoic PR #1768"
2019-04-15 18:50:33 -07:00
3618461f9b
Merge remote-tracking branch 'adafruit/master' into circuitpython-nickzoic-1042-nrf-nvm-bytearray-2
2019-04-10 14:09:26 -04:00
fdaff00c78
Make some space for NVM adafruit/circuitpython#1042
2019-04-09 10:56:53 +10:00
8e7fee2246
Working flash pages for nvm.ByteArray adafruit/circuitpython#1042
...
import microcontroller
def dump(n = microcontroller.nvm):
for i in range(0,len(n)):
print ("%02X " % n[i], end="")
if i % 16 == 15: print('')
microcontroller.nvm[0:4096] = bytes([1,2,3,4,5,6,7,8]) * 512
microcontroller.nvm[4096:8192] = bytes([16,17,18,19]) * 1024
microcontroller.nvm[4090:4101] = b'thisisatest'
microcontroller.nvm[100:105] = b'hello'
microcontroller.nvm[8000:8007] = b'goodbye'
dump()
2019-04-09 10:55:39 +10:00
492431a694
nvm.ByteArray reads & writes but no sensible erase yet adafruit/circuitpython#1042
2019-04-09 10:54:11 +10:00
f8e5e2da64
Start on nRF nvm.ByteArray adafruit/circuitpython#1042 (doesn't do anything yet)
2019-04-09 10:54:11 +10:00
0f003ac5b8
Reorganize board busses into shared-bindings and shared-module.
2019-04-08 16:58:50 -07:00
fe555a4098
Allow NFC pins to be used for other purposes.
2019-03-21 11:22:58 -04:00
bd13834a74
implement default busses for particle boards
2019-02-24 09:34:33 -05:00
9c24c804fb
Fix #ifdefs in port.c to call xxx_reset() rroutines properly. Remove most uses of EXPRESS_BOARD.
2019-02-18 22:44:31 -05:00
7b3f7605b8
address @tannewt changes: move and rename common files; remove PORT_HEAP_SIZE
2019-02-15 20:32:32 -05:00
a345ef28f2
finish Makefile refactoring; nrf builds work
2019-02-15 18:55:10 -05:00
6404aaf411
Fix up nrf and using board.SPI in FourWire
2019-01-17 18:19:07 -08:00
760bd8d8a4
share fourwire and make nrf compile
2019-01-17 15:15:59 -08:00
c1e6624f8f
Merge pull request #1470 from gpshead/mdk_usb_dongle
...
Add Makerdiary nRF52840 MDK USB dongle support.
2019-01-15 23:05:15 -08:00
af0f1a7542
Update pins.c
...
whitespace
2019-01-16 15:02:48 +11:00
c2d39a7ab7
Update pins.c
2019-01-16 14:58:16 +11:00
ac238838f2
Update pins.c
...
add declaration for RED_LED as D3 to match silkscreen.
2019-01-16 14:48:41 +11:00
7296b647ef
Add MDK nRF52840 MDK USB Dongle support.
...
Adds support for https://wiki.makerdiary.com/nrf52840-mdk-usb-dongle/ .
A cheap nRF52840 USB stick with optional headers, very Trinket and Itsy like.
2019-01-15 01:37:22 -08:00
b6b5ed9c89
Remove nRF52832 support
2018-12-30 22:49:20 -05:00
55084b30ef
remome FRAMEBUF from nrf builds - use QSPI for particle ARGON
2018-12-27 09:38:35 -05:00
8fc72e8978
Add SPI and I2C to SparkFun nRF52840 mini definition and add it to Travis.
2018-12-10 20:32:19 -08:00
8a981dc8e8
Merge remote-tracking branch 'adafruit/master' into sfe840
2018-12-10 20:13:36 -08:00
6ef8639971
Rework safe mode and have heap overwrite trigger it.
...
This creates a common safe mode mechanic that ports can share.
As a result, the nRF52 now has safe mode support as well.
The common safe mode adds a 700ms delay at startup where a reset
during that window will cause a reset into safe mode. This window
is designated by a yellow status pixel and flashing the single led
three times.
A couple NeoPixel fixes are included for the nRF52 as well.
Fixes #1034 . Fixes #990 . Fixes #615 .
2018-12-06 14:24:20 -08:00
b25bf062fb
Add correct flash chip for Particle Mesh boards
2018-12-04 18:20:51 -08:00
15c1fc873c
Add particle boards, fix cp32 and try to speed up atmel build
2018-12-04 18:20:48 -08:00
63cd9209f1
allow KeyboardInterrupt on UART read; fix nrf UART pin claiming; rename feather 52840 UART pins
2018-12-04 15:05:39 -05:00
09316b35d7
remove non-broken-out nrf pins. re-organize pins.c list.
2018-11-30 14:58:36 -07:00
f67814fc97
Adding SparkFun nRF52840 Mini board support.
2018-11-30 13:57:22 -07:00
d446d328d8
Fix QSPI on Feather nRF52840
...
We were writing with quad page program including the address (0x38)
which is unsupported by the GD25Q16C but it is supported by the
flash on the DK. So, we use the single address, quad data command
(0x32).
2018-11-27 00:13:24 -08:00
15eeac5d4b
A few fixes for nRF52840 feather QSPI and neopixel
2018-11-23 14:22:07 -08:00
5fe746f643
Latest Feather nRF52840 pin revisions
2018-11-21 19:46:49 -05:00
9d91111b1b
Move atmel-samd to tinyusb and support nRF flash.
...
This started while adding USB MIDI support (and descriptor support is
in this change.) When seeing that I'd have to implement the MIDI class
logic twice, once for atmel-samd and once for nrf, I decided to refactor
the USB stack so its shared across ports. This has led to a number of
changes that remove items from the ports folder and move them into
supervisor.
Furthermore, we had external SPI flash support for nrf pending so I
factored out the connection between the usb stack and the flash API as
well. This PR also includes the QSPI support for nRF.
2018-11-08 17:25:30 -08:00
64d457dad9
bring bleio PR up to date
2018-11-07 14:12:22 -05:00
d5a71a4b8a
nrf: Move bluetooth driver to the 'bluetooth' folder
2018-10-21 15:55:25 +02:00
aefabc5353
Update docs to reflect proper size of device
2018-10-20 03:29:20 -07:00
4c75a60bd3
Declobber a DEFINE
2018-10-20 02:57:17 -07:00
16ca9c8c7c
Makefile fixes and some docs
2018-10-20 02:43:13 -07:00
3d7b96aeb1
Add board and pin defs for MakerDiary NRF52840 MDK
2018-10-20 02:43:12 -07:00
f724647a45
fix feather nrf52840 build error
2018-09-25 17:09:54 +07:00
2f0e0bdcaf
migrate serial from uart to uarte
2018-09-25 16:14:44 +07:00
7a1b4ccc9b
Merge branch 'master' into nrf52_uart_io
2018-09-24 12:50:48 +07:00
c5593ec074
got uart tx work
2018-09-19 17:59:15 +07:00
1df3bcf392
add board.UART() function
2018-09-19 14:40:37 +07:00
d8c8c5f005
remove CFG_HWUART_FOR_SERIAL
2018-09-18 20:26:50 +07:00
7e8816ad6f
Add VOLTAGE_MONITOR alias to pin D31/A7
2018-09-13 23:46:47 +02:00
e335c74ac6
use open-drain capabilities on GPIO; clean up board init; set correct GPIO voltage
2018-09-09 15:01:28 -04:00
4382389e6f
fix typos, remove incorrect pca10059 example; add default buses for pca10056; improve board names for pca boards
2018-09-01 00:29:36 -04:00
9ea809bef7
add pin claiming to devices
2018-08-31 18:38:05 -04:00
585597a252
pin files rework; implement pin claiming; add more boards
2018-08-31 18:05:55 -04:00
ded38d30b6
rename pin.h to nrf_pin.h to avoid conflict with Pin.h
2018-08-26 20:37:12 -04:00
4cc33f8de6
Merge remote-tracking branch 'adafruit/master' into nrf_board_rename
2018-08-23 16:25:57 -04:00
7961103ee6
update SD to v6.1.0
2018-08-22 21:51:30 +07:00
eaf4d19dbb
Merge remote-tracking branch 'adafruit/master' into nrf_board_rename
...
Merge #1137
2018-08-22 10:24:10 -04:00
a516d1123f
fix typos
2018-08-22 19:42:41 +07:00
fc955b1591
remove bootloader binaries, update readme for using adafruit-nrufitl and flashing bootloader
2018-08-22 15:22:17 +07:00
c503cf990b
forgot to change .travis.yml
2018-08-21 20:35:58 -04:00
85df32907f
rename nrf boards to feather_nrf52832 and feather_nrf52840_express
2018-08-21 18:45:37 -04:00
df4184e478
rename linker file to SD major version only
2018-08-21 16:02:57 +07:00
e1ccc07841
remove bootloader & dfu-bootloader target
...
user should go to bootloader repo to upgrade bootloader
2018-08-14 20:19:28 +07:00
3525d65af3
should fix #1021
...
- update tinyusb for wanted char
- move usb code into usb.c
2018-07-17 21:24:49 +07:00
f98c7f708e
merge review
2018-07-12 01:37:23 +07:00
10846d316b
Merge branch 'master' into nrf52840_usbboot
2018-07-11 21:35:44 +07:00
a53b1c7cf1
code format
2018-07-10 22:49:51 +07:00
Jeff Epler
Nick
Diego Elio Pettenò
Scott Shawcroft
Dan Halbert
Sean Cross
cyz
Scott Shawcroft
Dan Halbert
Yihui Xiong
JoeBakalor
TG-Techie
Jeff Epler
siddacious
TG-Techie
ladyada
Drew Fustini
James Bowman
Michael Welling
Wojtek Siudzinski
Benny Meisels
Tavish Naruka
Nick Moore
Jerry Needell
dsiee
Gregory P. Smith
jimblom
arturo182
Josh Klar
Josh Klar
hathach
Pierrick C