Commit Graph

14 Commits

Author SHA1 Message Date
Damien George 09376f0e47 py: Introduce MP_ROM_NONE macro for ROM to refer to None object.
This helps to prevent mistakes, and allows easily changing the ROM value of
None if needed.
2019-12-27 22:51:17 +11:00
Damien George 59b7166d87 stm32: Add initial support for STM32WBxx MCUs.
This new series of MCUs is similar to the L4 series with an additional
Cortex-M0 coprocessor.  The firmware for the wireless stack must be managed
separately and MicroPython does not currently interface to it.  Supported
features so far include: RTC, UART, USB, internal flash filesystem.
2019-07-17 16:33:31 +10:00
Damien George 23d9c6a0fd stm32: Add initial support for STM32L0xx MCUs. 2019-07-05 17:24:59 +10:00
Damien George 34942d0a72 stm32/machine_uart: Change default UART timeout to 0, for non blocking.
It's more common to need non-blocking behaviour when reading from a UART,
rather than having a large timeout like 1000ms (the original behaviour).
With a large timeout it's 1) likely that the function will read forever if
characters keep trickling it; or 2) the function will unnecessarily wait
when characters come sporadically, eg at a REPL prompt.
2019-05-07 13:56:42 +10:00
Chris Mason 1b956ec817 stm32: Add support for F413 MCUs.
Includes:
- Support for CAN3.
- Support for UART9 and UART10.
- stm32f413xg.ld and stm32f413xh.ld linker scripts.
- stm32f413_af.csv alternate function mapping.
- startup_stm32f413xx.s because F413 has different interrupt vector table.
- Memory configuration with: 240K filesystem, 240K heap, 16K stack.
2019-05-02 16:26:53 +10:00
Damien George 6e30f96b0b ports: Convert legacy uppercase macro names to lowercase. 2019-02-12 14:54:51 +11:00
Tobias Badertscher 372e7a4dc6 stm32: Implement UART.irq() method with initial support for RX idle IRQ. 2018-12-29 17:21:37 +11:00
Damien George dc23978dde stm32/uart: Add ability to have a static built-in UART object.
A static UART is useful for internal peripherals that require a UART and
need to persist outside the soft-reset loop.
2018-12-10 16:21:50 +11:00
Damien George 61ef031687 stm32/uart: Move config of char_width/char_mask to uart.c. 2018-12-10 16:21:50 +11:00
Damien George 6ea45277bf stm32/uart: For UART init, pass in params directly, not via HAL struct.
To provide a cleaner and more abstract C-level interface to the UART.
2018-12-10 16:21:50 +11:00
Damien George bc3f0dddac stm32/uart: Remove HAL's UART_HandleTypeDef from UART object struct.
This UART_HandleTypeDef is quite large (around 70 bytes in RAM needed for
each UART object) and is not needed: instead the state of the peripheral
held in its registers provides all the required information.
2018-12-10 16:21:50 +11:00
Damien George 7d7f59d78b stm32/uart: Factor out code to set RX buffer to function uart_set_rxbuf. 2018-12-10 16:21:50 +11:00
Damien George 524e13b006 stm32/uart: Factor out code from machine_uart.c that computes baudrate. 2018-12-10 16:21:50 +11:00
Damien George a2271532be stm32: Split out UART Python bindings from uart.c to machine_uart.c. 2018-12-10 16:21:50 +11:00