923a5b28ca
Add NO_FPS_LIMIT instead of magic numbers
2023-10-05 14:56:11 -07:00
807edd4c66
Improve framebufferdisplay.refresh()
...
Now the defaults make it easy to refresh when you want. It matches
the displayio.Display().refresh() behavior.
2023-10-05 14:56:11 -07:00
b4e29e9426
Merge pull request #8456 from tannewt/remove_deprecated_apis
...
Remove deprecated apis
2023-10-03 15:08:39 -04:00
7938c6cfd2
Remove one I2CPeripheral leftover
2023-10-02 14:36:19 -07:00
8183d8ef50
Remove `displayio.*.show()`
...
Use `displayio.*.root_group =`.
2023-10-02 14:28:59 -07:00
a15c111d5c
Merge pull request #7718 from microdev1/watchdog-rp
...
Update WatchDog implementation
2023-10-02 14:17:29 -07:00
fd4a61233e
Update documentation for rotaryio.IncrementalEncoder
...
Update the documentation in circuitpython/shared-bindings/rotaryio/IncrementalEncoder.c
to explicitly state that rotaryio.IncrementalEncoder assumes the encoder's pins are
connected to ground and sets pull-ups on the pins accordingly.
Closes #5847
Signed-off-by: Sumitra Sharma <sumitraartsy@gmail.com>
2023-10-02 21:18:55 +05:30
f80d08e207
Make dot clock displays with a masked portion on the left work
2023-09-27 15:15:32 -05:00
6990c37320
Fix calculation of bit-weight for reset pin
2023-09-26 08:33:00 -05:00
04ad525c09
Re-work ioexpander_send_init_sequence
...
* can now send the I2C bus initialization code
* can now reset the display on an I/O expander pin
* parameters re-ordered to enable easy use with **board.TFT_IO_EXPANDER
2023-09-25 11:31:16 -05:00
27fd60d739
implement suggested changes
...
- update the docs
- split out common `watchdog_reset`
- revert to using `None` instead of `WatchDogMode.NONE`
2023-09-24 15:23:38 +00:00
05812e0618
Merge branch 'main' into watchdog-rp
2023-09-24 05:13:22 +00:00
e39fbf1b26
Merge pull request #8401 from jepler/i2c-expander-init
...
Fast(ish) special purpose bitbang spi over i2c
2023-09-18 13:19:49 -07:00
91b98dc9d5
fix constness
2023-09-15 14:45:53 -05:00
c7b7e22195
remove debug print
2023-09-15 11:16:43 -05:00
4b41fdb586
Fast(ish) special purpose bitbang spi over i2c
...
with the i2c bus operating at 400kHz this achieves a 4.8kHz SPI clock
rate which could be worse.
It accepts the same style of init sequence as displayio.
tested by scoping the pins on the espressif lcd dev kit with a dummy init sequence:
```python
dotclockframebuffer.ioexpander_send_init_sequence(
bus=bus,
i2c_address=expander_addr,
gpio_address=1,
gpio_data_len=1,
gpio_data=0xff,
cs_bit=1,
mosi_bit=3,
clk_bit=2,
init_sequence=init_sequence)
```
2023-09-14 14:42:48 -05:00
9f1d52601e
merge from 8.2.x
2023-09-12 20:14:30 -04:00
d8aeceb706
SSLContext.load_verify_locations - no kw-only args
2023-09-12 12:45:46 -04:00
885dbec599
Merge pull request #8357 from eightycc/memorymap
...
Add memorymap support to RP2 port
2023-09-08 11:28:11 -07:00
0e0941d6fd
Review changes
2023-09-07 16:45:45 -07:00
c3c2b84584
fix typo, copyright notice
2023-09-07 12:57:45 -05:00
1e178318cf
review update, add RP2040 example
2023-09-06 19:59:40 -07:00
66b3eccaf6
8334: RP2040 lacks raw memory map access
2023-08-31 20:25:20 -07:00
80a1d1a20a
Add support for a non-displayed left portion of screen
2023-08-31 14:52:26 -05:00
ed9cacf41d
Add DotClockFramebuffer
2023-08-30 10:30:15 -05:00
ae181d69af
Update wrappers to use new gzip changes
2023-08-28 21:59:00 -07:00
233cf7fc6d
Merge pull request #8326 from bill88t/picow-stop-ap
...
Pico W wifi code improvements.
2023-08-25 09:49:04 -07:00
ab70f8eace
Merge remote-tracking branch 'adafruit/main' into i2s_mclk
2023-08-24 15:07:14 -07:00
e3314ef7a6
Add new picow doc notes
2023-08-23 22:12:19 +03:00
e08ad22ef6
Merge pull request #8317 from jepler/merge-82x
...
Merge 8.2.x into main
2023-08-22 17:28:30 -04:00
6e8a59a948
Merge remote-tracking branch 'origin/8.2.x' into merge-82x
2023-08-22 14:10:29 -05:00
c1dce99be9
Link to dedicated guide for rgbmatrix
2023-08-22 10:55:55 -05:00
e336dc90cf
update explanation of height; it is optional
2023-08-22 10:53:10 -05:00
2dcc0d2a62
further explain width and height, it can't hurt
2023-08-22 10:46:34 -05:00
81ad2e05ba
address review comments
2023-08-22 10:44:35 -05:00
485924896e
RGBMatrix: document constructor arguments
...
Closes : #8283
2023-08-22 10:31:09 -05:00
bae7e5292e
Merge pull request #8298 from jepler/canio-doc-mcp2515
...
canio: add a doc note about boards like CAN feather that use mcp2515
2023-08-22 09:48:09 -05:00
c029d6a165
Merge remote-tracking branch 'origin/8.2.x' into merge-82x
2023-08-22 08:49:16 -05:00
8157920d10
Merge pull request #8312 from jepler/fix-sphinx-82x
...
Use the ".. jinja" tag to render support_matrix template
2023-08-21 23:46:25 -04:00
2fc413db24
Use the ".. jinja" tag to render support_matrix template
...
.. and remove the substring check for the file.
this fixes the problem with sphinx 7.2.2 that the "docname" can
be None (see https://github.com/sphinx-doc/sphinx/issues/11620 )
2023-08-21 21:34:14 -05:00
d23ddff971
Add several constants needed to use multicast UDP
...
This was verified by @todbot to work on esp32 s2 and s3;
the constant should match any system that uses LWIP numbering.
2023-08-21 16:19:58 -05:00
994bd2371f
canio: add a doc note about boards like CAN feather that use mcp2515
2023-08-19 12:07:07 -05:00
10a022db87
consolidate and shorten some error messages
2023-08-19 12:39:54 -04:00
6851faacaa
Merge remote-tracking branch 'adafruit/main' into merge-micropython-v1.19.1
2023-08-18 13:29:39 -04:00
f93022b142
Two tweaks to mclk
2023-08-17 14:28:33 -07:00
8c5c73df38
Add I2S MCLK support to iMX RT
2023-08-17 11:39:14 -07:00
8cf5b6e707
fixes to unix port support; thanks @jepler
2023-08-14 09:51:52 -04:00
d582407b06
pre-commit fixes
2023-08-14 00:59:22 -04:00
2171e67c1b
merge latest adafruit/main
2023-08-13 19:43:54 -04:00
850877a85f
wip; fix generators; typos
2023-08-13 00:30:59 -04:00
Scott Shawcroft
Dan Halbert
Sumitra Sharma
Jeff Epler
MicroDev
Dan Halbert
Bob Abeles
Bobby Jap
Bill Sideris