Commit Graph

526 Commits

Author SHA1 Message Date
Scott Shawcroft
d5b747b305
Fix board inits 2023-04-21 13:23:01 -07:00
hathach
fecc1bdedb
fix typos (partial) detected by codepell 2023-03-18 22:17:02 +07:00
Scott Shawcroft
b79661d631
Alphabetize, fix typo and remove incorrect comment 2023-02-23 14:34:54 -08:00
Scott Shawcroft
de5f58a61d
Merge branch 'main' into banglejs2 2023-02-21 12:04:28 -08:00
Scott Shawcroft
931c7c1c51
Add Bangle.js 2, JDI memory displays and ACeP epd
This 2-in-1 PR started with the goal of support the Bangle.js 2
smartwatch with *no USB*.
* Adds "secure" DFU build support with a committed private key.
* Adds 3-bit color support with one dummy bit for the JDI memory display
* Allows nrf boards to have a board_background_task() run in RUN_BACKGROUND_TASK.
  This is needed because the Bangle.js 2 uses the watchdog to reset.
* Renamed port_background_task() to port_background_tick() to indicate it
  runs on tick, not RUN_BACKGROUND_TASK.
* Marks serial connected when the display terminal is inited. This means
  that safe mode messages show up on the display.

ACep, 7-color epaper displays also pack 3 bits in 4. So, I added that
support as well.
* Adds 3-bit ACeP color support for 7-color e-paper displays. (Not
  watch related but similar due to color depth.)
* Allows a refresh sequence instead of a single int command. The 7" ACeP
  display requires a data byte for refresh.
* Adds optional delay after resetting the display. The ACeP displays
  need this. (Probably to load LUTs from flash.)
* Adds a cleaning phase for ACeP displays before the real refresh.

For both:
* Add dither support to Palette.
* Palette no longer converts colors when set. Instead, it caches
  converted colors at each index.
* ColorConverter now caches the last converted color. It should make
  conversions faster for repeated colors (not dithering.)
2023-02-15 15:03:40 -08:00
Dan Halbert
d8231f1588 Implement safemode.py 2023-02-13 18:26:38 -05:00
Pontus Oldberg
9f266c361b Initializing external flash SPI speed to SPI_FLASH_MAX_BAUDRATE, instead of using driver default speed (32MHz), before probing JEDEC identifier. 2022-12-21 16:33:06 +01:00
Pontus Oldberg
66eca9c35e Updated formatting. 2022-12-11 17:25:26 +01:00
Pontus Oldberg
f7e735b492 Added LDO control pin, new flash variants and support functions for the LDO control pin. 2022-12-11 17:11:24 +01:00
Pontus Oldberg
9ef5b7d118 Merge branch 'main' of https://github.com/PontusO/circuitpython 2022-12-11 13:02:03 +01:00
Pontus Oldberg
da413094f8 Added LDO control pin and initial setup 2022-12-11 13:01:00 +01:00
Dan Halbert
4e7d65251f Add pin for charge rate for Seeed XIAO nRF52840 Sense 2022-12-08 14:09:44 -05:00
foamyguy
c6ca2bdd59 disable pixelmap on bluemicro833 2022-11-24 09:09:48 -06:00
foamyguy
19f1119994 Merge branch 'main' into fastpixelmap
# Conflicts:
#	shared-module/adafruit_pixelbuf/PixelBuf.c
2022-11-21 20:25:58 -06:00
Jeff Epler
f5c637dc10
Add adafruit_pixelmap.PixelMap
.. a fast helper for animations. It is similar to and inspired by the
PixelMap helper in Adafruit LED Animation library, but with an extremely
fast 'paste' method for setting a series of pixels. This is a common
operation for many animations, and can give a substantial speed improvement.

It's named `adafruit_pixelmap` so that we can package a compatible version
in pure Python for systems that can't fit it in C in flash, or for
Blinka.

This is a proof of concept and can make a very fast comet animation:
```python
import time
import adafruit_pixelbuf
import adafruti_pixelmap
import board
import neopixel
from supervisor import ticks_ms
from adafruit_led_animation.animation.solid import Solid
from adafruit_led_animation import color

pixel_pin = board.GP0
pixel_num = 96

pixels = neopixel.NeoPixel(pixel_pin, pixel_num, brightness=1, auto_write=False, pixel_order="RGB")

evens = adafruit_pixelmap.PixelMap(pixels, tuple(range(0, pixel_num, 2)))
odd_indices = tuple((i, i+2) for i in range(1, pixel_num, 4))
print(odd_indices)
odds = adafruit_pixelbuf.PixelMap(pixels, odd_indices)
assert len(odds) == len(odd_indices)


comet_length = 16

comet1 = [color.calculate_intensity(color.GREEN, ((1+i) / comet_length) ** 2.4)
        for i in range(comet_length)]
comet2 = [color.calculate_intensity(color.PURPLE, ((1+i) / comet_length) ** 2.4)
        for i in range(comet_length)]

pos1 = 0
pos2 = 96//4

while True:
    evens.paste(comet1, pos1, wrap=True, reverse=False, others=0)
    pos1 = (pos1 + 1) % len(evens)

    odds.paste(comet2, pos2, wrap=True, reverse=True, others=0)
    pos2 = (pos2 - 1) % len(odds)
    pixels.show()

    m = ticks_ms()
    if m % 2000 > 1000:
        time.sleep(.02)
```
2022-11-11 07:54:33 -06:00
Kyle McCreery
1f332e7007 Adding pillbug initial commit 2022-11-09 23:15:38 -05:00
Neradoc
0aa41fa92e change BOARD_USER_SAFE_MODE_ACTION into a separate sentence 2022-10-30 01:55:42 +02:00
Dan Halbert
4cb69a51d5 Use MP_WEAK for default board.c routines 2022-09-08 07:36:50 -04:00
Dan Halbert
41bcd7b260 Remove support for auto-brightness 2022-08-09 22:40:21 -04:00
Arudinne
a55aebc718 Added support for 8MB flash for Challenger 840 2022-07-26 20:34:01 -05:00
Neradoc
eabe8b971a list extensions instead of macros names ("bin,uf2" not BIN_UF2)
the modules_support_matrix usees a dictionnary per board instead of a list
optionally include the frozen modules URLs in it
2022-07-26 18:15:59 +02:00
Neradoc
d021d9ae4a Move build extensions to board directories
- define CIRCUITPY_BUILD_EXTENSIONS to predefined values
- set CIRCUITPY_BUILD_EXTENSIONS in port and board config
- reuse the support matrix "get_settings_from_makefile" to get it
- move the existing port and board specific values
- remove the C3 specific board values because it's not the default
- update build_release_files.py to use get_settings_from_makefile
2022-07-26 18:15:50 +02:00
Dan Halbert
8bb369cac5 refactor debug UART to console UART; get working on ESP32 2022-06-30 23:16:46 -04:00
Scott Shawcroft
894cea217d
Merge pull request #6486 from DavePutz/issue_6478
Fix for Issue #6478
2022-06-15 09:43:09 -07:00
root
015e95807a Fix for Issue #6478 2022-06-14 12:14:05 -05:00
Scott Shawcroft
1a3d2a5b5e
Shrink nrf52833 builds
Make them CIRCUITPY_FULL_BUILD = 0 and rework the boards to have
the same modules enabled (ish.)

Also make ZLIB require FULL_BUILD and disable advanced `micropython`
module APIs by default on all builds.
2022-06-13 15:36:15 -07:00
foamyguy
260994d16e Merge branch 'main' into display_brightness_pwm 2022-06-04 11:32:15 -05:00
foamyguy
cbff9dd8e3 add new argument for all boards with built-in display 2022-06-04 11:08:20 -05:00
Dan Halbert
947f564672 tune LTO on nrf 2022-05-26 22:16:41 -04:00
Dan Halbert
d74193c298 Use -flto and -flto-partition only as needed 2022-05-26 11:36:41 -04:00
Neradoc
17bba7b17d remove Adafruit_CircuitPython_BusDevice from frozen modules, it's built in now 2022-04-19 06:49:11 +02:00
Dan Halbert
2693a4cfe1
Merge pull request #6069 from gamblor21/uzlib-module
zlib Module
2022-04-06 12:06:44 -04:00
Pontus Oldberg
286e26edf0 Added support for 4MB flash. 2022-04-06 11:08:22 +02:00
Mark
8ed7b114cd
Merge branch 'main' into uzlib-module 2022-04-03 11:48:37 -05:00
Pontus Oldberg
f2d10237d2
Merge branch 'adafruit:main' into main 2022-03-30 16:43:39 +02:00
Scott Shawcroft
fcde108d03
Merge pull request #6194 from jepler/revamp-duplicate-usb-check
Improve the USB vid:pid duplicate checker
2022-03-24 14:57:48 -07:00
jerryneedell
bcec1e44f0 add status LED to nrf pca10059 dongdle 2022-03-24 15:05:02 -04:00
Jeff Epler
d91ca7369c
Merge remote-tracking branch 'origin/main' into revamp-duplicate-usb-check 2022-03-24 09:44:41 -05:00
Jeff Epler
a07ac72cc5
Improve the USB vid:pid duplicate checker
To me, it made more sense to track which boards go together in a cluster;
when reviewing a request to actually use a duplicate vid/pid, you want
to know what board(s) it is aliasing.

I also revamped the detection of non-USB boards so that a board .mk file
that couldn't be parsed by the code here would raise a problem instead
of just being skipped for the purposes of checking.

There were some lines with comments on the end, and some variation in
capitalization of the IDs. These are all normalized and a (sometimes
unfriendly!) error printed when it's incorrect.

Before this, here were some ways to trick the duplicate vid/pid checker:
```
USB_PID = 0XABCD
USB_PID = 0xAbCd
USB_PID = 0xABCD # harmless comment?
```
None of these things were ever done on purpose.
2022-03-24 09:42:11 -05:00
Pontus Oldberg
c7b28eb2ef
Update ports/nrf/boards/challenger_840/pins.c
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-03-23 17:14:49 +01:00
Pontus Oldberg
d26297ae98
Update ports/nrf/boards/challenger_840/pins.c
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-03-23 17:14:40 +01:00
Pontus Oldberg
7901850bb8
Update ports/nrf/boards/challenger_840/pins.c
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-03-23 17:14:28 +01:00
Pontus Oldberg
5e09ed611e Added Challenger 840 board. 2022-03-22 21:36:54 +01:00
Neradoc
367e0ea901 Enable rgb status LED on MakerDiary USB Dongle 2022-03-22 20:53:12 +01:00
Scott Shawcroft
51701e6abe
Merge remote-tracking branch 'adafruit/7.2.x' into merge_7.2.2 2022-03-17 14:15:55 -07:00
Scott Shawcroft
78cb61c7a3
Turn off traceback on bluemicro833 2022-03-17 11:38:27 -07:00
Scott Shawcroft
dcc3ec171e
Merge remote-tracking branch 'adafruit/7.2.x' into merge_7.2.2 2022-03-15 13:56:11 -07:00
Scott Shawcroft
4ffbf0830b
Merge pull request #6157 from arms22/ssci_isp1807_micro_board
Add board ssci_isp1807_micro_board
2022-03-15 13:42:34 -07:00
arms22
2b4917bbf5 change USB_PID 2022-03-15 14:54:29 +09:00
arms22
7482148a78 Add board ssci_isp1807_micro_board 2022-03-15 14:39:32 +09:00