beab76c325
Added M5Stack Core Fire board
2022-10-24 18:38:30 +00:00
3c5bf4e852
Update ports/espressif/boards/m5stack_stamp_c3/mpconfigboard.mk
...
Co-authored-by: MicroDev <70126934+MicroDev1@users.noreply.github.com>
2022-10-22 16:23:27 +02:00
d147712522
Add M5 Stamp C3 board
2022-10-22 00:45:54 +02:00
5114ae7a31
fix `2MB-no-uf2` partition table
2022-10-17 19:44:08 +05:30
fc00a6675e
Added some pin definitions to match with the Arduino core.
2022-10-14 17:25:24 +08:00
822e806f03
Merge pull request #7031 from BPI-STEAM/CircuitPython-main-bpi-picow-dev
...
Add BananaPi BPI-PicoW-S3 .
2022-10-11 22:53:37 -04:00
376df8ec7e
Add BananaPi BPI-PicoW-S3 .
...
Adds support for the BananaPi BPI-PicoW-S3 Boards.
Based on esp32s3 chip.
With one WS2812 LED, one monochrome LED, one ceramic antenna.
Support double-reset to tinyUF2.
2022-10-12 09:11:25 +08:00
4f753251db
cleanup `mpconfigboard.mk` of espressif boards
...
- move `INTERNAL_FLASH_FILESYSTEM` to `mpconfigport.mk`
- move `LONGINT_IMPL` to `mpconfigport.mk`
- move `CFG_TUD_TASK_QUEUE_SZ` to `Makefile`
2022-10-06 16:15:01 +05:30
296960dd89
shorten board.c
2022-10-05 20:23:19 -04:00
d31acdef6c
we don't use AUTORESET_DELAY_MS
2022-10-06 02:19:48 +02:00
dd5f9411c8
Merge branch 'adafruit:main' into main
2022-10-05 13:44:12 -05:00
02e115cbc2
Update mpconfigboard.mk
2022-10-04 00:03:59 -05:00
330b96726a
add newlines to end of files
2022-10-04 04:56:31 +00:00
5268ef01c9
Utilize VID/PID from native USB port
2022-10-03 23:45:28 -05:00
cffc1bfcab
sdkconfig didn't get committed for some reason...
2022-10-03 22:54:31 -05:00
a948dc399b
add esp32-s2-devkitc-1-n8r2 variant
2022-10-04 03:51:51 +00:00
90f6096955
fix ai-thinker creation ids; fix some typos elsewhere
2022-10-03 15:29:03 -04:00
9d1b12066d
Espressif: do not hold pins during deep sleep if not necessary
2022-09-29 20:11:48 -04:00
a769beed3f
Use new unique ID for this board
2022-09-22 16:23:38 -05:00
1091d51af2
Merge pull request #6918 from UnexpectedCircuitPython/main
...
Added support for Unexpected Maker TinyPICO (V2/V3) and TinyPICO Nano
2022-09-17 21:39:17 -04:00
268b3f0dde
Added support for Unexpected Maker TinyPICO (V2/V3) and TinyPICO Nano boards using ESP32-PICO-D4
2022-09-18 09:49:30 +10:00
b2ffda219a
updated a pin definition
2022-09-17 16:53:24 -04:00
4a69dfa50c
Merge pull request #6907 from dhalbert/preserve-pins-on-deep-sleep
...
allow preserving pin state during deep sleep
2022-09-16 17:52:04 +05:30
4df8a51982
Remove unneeded workaround for Feather ESP32-S2 TFT
2022-09-15 20:06:47 -04:00
60f43b1703
allow preserving pin state during deep sleep
2022-09-15 17:35:14 -04:00
56c5f1eedf
Add BananaPi BPI-Leaf-S3.
...
Based on esp32s3, all available pins are drawn.
2M PSRAM, 8M FLASH.
A JST SH 4-pin Connector can be used for STEMMA QT / Qwiic.
A MX 1.25mm 2-Pin Connector Lithium battery power supply.
A WS2812 LED.
2022-09-15 14:18:24 +08:00
14fc4a0797
Merge pull request #6898 from dhalbert/espressif-pwmout-reset
...
Espressif pwmout reset fixes
2022-09-14 18:47:05 -04:00
ae64f9fd78
Merge pull request #6899 from BPI-STEAM/CircuitPython-main-BPI-BIT-S2-PR
...
Add BananaPi BPI-Bit-S2 .
2022-09-13 23:02:46 -04:00
6f4cc611ed
Add BananaPi BPI-Bit-S2 .
...
Adds support for the BananaPi BPI-Bit-S2 Boards.
Based on esp32s2 chip.
With 25 ws2812 LEDs, 1 buzzer, 2 photosensitive sensors, 1 thermosensitive sensor,
2 buttons on the front, 1 reset button and 1 boot button on the back.
2022-09-14 10:21:23 +08:00
14adfb16dd
avoid pwmout_reset() workaround by reordering in main(); remove unnecessary never-resets
2022-09-12 21:32:21 -04:00
d0d10179c2
fix logic in pwmout_reset()
2022-09-12 17:03:45 -04:00
c157f1cb39
Cast pin_number to int8_t so that it can be used with switch-case.
2022-09-12 18:56:15 +08:00
0ae015e4d9
Removed whitespaces.
2022-09-12 18:25:27 +08:00
aaa2be1200
Set the default pin state for GPIOs to pull down.
2022-09-12 18:19:33 +08:00
36221bd749
update board microdev_micro_c3
2022-09-11 13:31:38 +05:30
2fbb3090e2
Changed the pins assignment.
2022-09-09 16:50:14 +08:00
58b00467c4
Merge pull request #6878 from dhalbert/weak-board-defs
...
Use MP_WEAK for default board.c routines
2022-09-08 10:47:08 -04:00
4cb69a51d5
Use MP_WEAK for default board.c routines
2022-09-08 07:36:50 -04:00
6c4f352533
Fixed incorrect IO naming for ProS3 and FeatherS3
2022-09-07 19:51:45 +10:00
14498f793d
Merge pull request #6859 from wemos/s3_cpython
...
Add LOLIN S3 ESP32-S3 board.
2022-09-04 13:10:52 -04:00
ca7fb6dede
removal of sda-scl and add "GP" to 40,41
2022-09-04 18:05:50 +03:00
e1891038c8
Forgor the one IO pin and sda-scl
2022-09-04 16:59:56 +03:00
3a18d285a2
Add LOLIN S3 ESP32-S3 board.
2022-09-03 11:06:51 +08:00
8ed6a6135a
Disable camera on boards without psram
2022-08-26 09:27:50 -05:00
528da05f54
Add Waveshare ESP32-S2-Pico-LCD
2022-08-15 16:46:14 +02:00
2f2ccdddbf
pycam rev b pins
2022-08-13 23:41:35 -04:00
df1435ae94
Audit all boards with LED pins defined
...
Add them as MICROPY_HW_LED_STATUS so that we can share reset code
for them. They aren't actually used for the status if another RGB
option is available. (But maybe they should be.)
Fixes #6717
2022-08-11 14:41:20 -07:00
198c8fea11
merge from upstream and fix espressif_esp32s3_eye
2022-08-10 08:43:08 -04:00
02cc6c2aee
Merge remote-tracking branch 'adafruit/main' into remove-autobrightness
2022-08-10 08:35:53 -04:00
41bcd7b260
Remove support for auto-brightness
2022-08-09 22:40:21 -04:00
CDario
Neradoc
askpatrickw
microDev
Kong Wai Weng
Dan Halbert
Wind-stormger
Dan Halbert
Kyle Mohr
Jeff Epler
Seon Rozenblum
Paul Price
bill88t
wemos
Martin
lady ada
Scott Shawcroft