d74c8b9425
WIP: more Descriptor work; refactor gattc/gatts read/write
2019-08-06 22:55:25 -04:00
243334da75
Merge remote-tracking branch 'adafruit/master' into ble-pairing
2019-08-05 23:06:24 -04:00
59efce3035
Merge pull request #2039 from dhalbert/metro-52840
...
Metro nRF52840 rev A defn; remove '#define FEATHER52840' from mpconfigboard.h
2019-08-05 18:48:36 -07:00
b675a27e16
Merge pull request #2000 from jepler/nrf-pwm-audio
...
Implement PWM audio out for the nrf port
2019-08-05 17:26:27 -07:00
c56566179a
Metro nRF52840 rev A defn; also remove '#define FEATHER52840' from mpconfigboard.h files
2019-08-05 18:10:27 -04:00
b67d04a5b1
Merge remote-tracking branch 'adafruit/master' into ble-pairing
2019-08-05 16:35:44 -04:00
77bc1ba03e
nrf: PWMAudioOut: Remove the need to wait in "pause"
...
The original formulation was because I saw the need to avoid a transition
from playing to stopped exactly when a resume was taking place. However,
@tannewt was concerned about this pause causing trouble, because it could
be relatively lengthy (several ms even in a typical case).
After reflection, I've convinced myself that updating the registers
in this order in resume avoids a window where a "stopped" event can
be missed as long as the shortcut is updated first.
Testing re-performed: pause/resume testing of looped RawSample and
WaveFile audio sources.
2019-08-03 08:19:25 -05:00
4bae29b925
nrf: enable link-time optimization
...
Testing performed: installed freshly built .uf2 on a Particle Xenon.
Checked that circuitpython still starts.
Checked that the size of all .uf2 files for nrf builds are plausible.
Aside from memory savings, the performance of Python code (pystone)
increased by about +14%.
However, this adds about 12-16 seconds to each nrf build.
Timings & Sizes (build system: i5-3320M, -j5 parallelism on 4 threads):
Before:
$ make -j5 BOARD=particle_xenon
765004 bytes free in flash out of 1048576 bytes ( 1024.0 kb ).
232076 bytes free in ram for stack out of 245760 bytes ( 240.0 kb ).
68.54user 11.83system 0:34.34elapsed 234%CPU
pystones before: 570
After:
$ make -j5 BOARD=particle_xenon
804284 bytes free in flash out of 1048576 bytes ( 1024.0 kb ).
232072 bytes free in ram for stack out of 245760 bytes ( 240.0 kb ).
71.06user 11.77system 0:46.91elapsed 176%CPU
pystones after: 650
Timings on travis:
Before:
Build feather_nrf52840_express for pl took 55.79s and succeeded
Build feather_nrf52840_express for zh_Latn_pinyin took 3.18s and succeeded
After:
Build feather_nrf52840_express for pl took 62.72s and succeeded
Build feather_nrf52840_express for zh_Latn_pinyin took 19.10s
Closes : #1396
2019-08-02 20:59:47 -05:00
7ce3776b80
WIP: rework of Characteristic properties; enhance Descriptor; not tested
2019-08-02 17:57:31 -04:00
28b7cbfca6
nrf: Mark interrupt vectors as used
2019-08-02 07:53:35 -05:00
34e2bab96a
nrf: Implement RUNMODE_BOOTLOADER and RUNMODE_SAFE_MODE
2019-08-01 18:53:07 -05:00
76f65ac694
Implement play/pause
...
.. and also incidentally fix a problem where a RawSample could only
be looped 131070 times.
2019-07-31 20:02:56 -05:00
91d791afd0
cleanup adapter.address; add uniquish suffix to BLE device name
2019-07-31 00:30:24 -04:00
83129b8c63
BLE: peripheral client pairing (not yet bonding); fix time doc formatting
2019-07-30 14:26:26 -04:00
b72352949b
PWM audio: Rename AudioOut -> PWMAudioOut, _audioio_ -> _audiopwmio_
2019-07-29 18:39:00 -04:00
28ca05ccdc
allow discovery from central or peripheral
2019-07-27 13:22:15 -04:00
a183425e00
ports/nrf: Implement audioio.AudioOut using PWM
...
This implements AudioOut, with known caveats:
* pause/resume are not yet implemented (this is just a bug)
* at best, the sample fidelity is 8 bits (this is a hardware limitation)
Testing performed:
My test system is a Particle Xenon with a PAM8302 op-amp
https://www.adafruit.com/product/2130 and 8-ohm speaker. There's no
analog filtering between the Xenon's PWM pin and the "A+" input of
the amplifier; the "A-" pin is disconnected. It is powered from
VUSB.
I used pin D4, which is *NOT* listed as a low-speed-only pin, but
the code does NOT switch the pin to high drive. This is related to
an open issue for general inability to set drive level for pins
being used by a "special function" on nrf:
https://github.com/adafruit/circuitpython/issues/1270
Nothing about the code I've written should limit the usable pins.
All samples I played were 16-bit, generally monophonic at 11025Hz
and 22050Hz from the Debian LibreOffice package.
2019-07-26 07:57:11 -05:00
2bc704fe07
ports/nrf: factor out routines for allocating, freeing pwm channels
2019-07-26 07:52:37 -05:00
8ec2d6ce49
Merge pull request #2007 from hierophect/F4xx-port-setup
...
Add STM32 Discovery F412ZG and F411RE support
2019-07-24 18:49:48 -07:00
c921f6637f
update tinyusb lib to 0.5.x
2019-07-24 16:46:31 +07:00
82ab998cd5
Merge pull request #1998 from tannewt/monocolor
...
Add support for grayscale displays
2019-07-22 22:30:28 -04:00
58630a844a
Add feature conditionals and clean up
2019-07-22 12:58:28 -04:00
e4d92a3aad
Fix incorrect preprocessor define NRFX_TIMER3/4
...
Should be NRF_TIMER3 and NRF_TIMER4
2019-07-22 20:07:05 +05:30
6797ec6ed3
Add support for grayscale displays that are < 8 bit depth.
...
This also improves Palette so it stores the original RGB888 colors.
Lastly, it adds I2CDisplay as a display bus to talk over I2C. Particularly
useful for the SSD1306.
Fixes #1828 . Fixes #1956
2019-07-19 16:06:11 -07:00
a98bfa628e
Merge pull request #2002 from ntavish/blip_improvements
...
Blip improvements
2019-07-19 10:52:08 -07:00
724ce4acba
enable libraries needed by BlipBoy Shield
2019-07-19 18:48:08 +05:30
43e8a4110f
Add missing files for DigitalIO
2019-07-17 14:18:01 -04:00
364ee62d10
Address review comments.
2019-07-16 19:53:36 -04:00
1cf8a3e8d8
Merge remote-tracking branch 'adafruit/master' into ble-scanner
2019-07-11 18:42:16 -04:00
6fad383367
Merge pull request #1925 from C47D/rgb_status
...
Initial support for RGB led as Status indicator, fixes #1382
2019-07-09 10:31:34 -07:00
6a001786a9
merge from master
2019-07-09 08:58:49 -04:00
118b26b335
UARTClient now works both directions
2019-07-09 00:21:46 -04:00
09ddff8df1
WIP: Need descriptors for Central CCCD discovery; not done yet
2019-07-07 00:07:47 -04:00
5610e05b8c
Fix up nrf so that it is initialized properly. Also, do not reset
...
it's pins.
2019-07-06 12:48:16 -07:00
6e5d70fa19
changed type of receiver_buffer_size to uint16_t
2019-07-03 12:02:01 -07:00
bf8a35b2f8
WIP: CharacteristicBuffer for Central; not working: need to set remote Characteristic Service
2019-07-02 22:34:54 -04:00
6ea01ea9b0
Central is connecting; characteristics can be read and written
2019-06-29 00:20:06 -04:00
16ba035ba7
first commit, very crude
2019-06-28 15:36:08 -04:00
140904ec84
getting Scanner to work
2019-06-22 22:10:15 -04:00
4881e1ff55
WIP: Central compiles; now will test
2019-06-21 18:04:04 -04:00
23bd861c9a
nrf: fix neopixel_write pwm buf size calc
2019-06-20 18:02:14 -04:00
24ac1fdcab
WIP: backup only; not compiled
2019-06-19 21:54:28 -04:00
a1b5d800f3
Update copyrights; get ready for Central
2019-06-19 10:42:36 -04:00
35b9191857
Don't operate directly on bleio objects in shared-bindings: use common_hal
...
routines instead. Changes made but not yet tested.
2019-06-18 23:46:20 -04:00
1356819de1
Handle None for BLE name; fix ScanEntry bug; compile issue
2019-06-17 23:16:40 -04:00
bed6d43a76
merge from upstream; WIP redo Address; no more AddressType
2019-06-13 21:55:07 -04:00
62de2506e4
Include display objects in gc.
2019-06-06 17:49:32 -04:00
1905d90eaa
Make advertising data buffers long-lived
2019-06-05 20:08:53 -04:00
4a7122d354
boards: add support for Electronut labs Blip
...
Signed-off-by: Tavish Naruka <tavishnaruka@gmail.com>
2019-06-05 00:49:29 +05:30
613e12f99f
Replace Broadcaster with enhanced Peripheral
2019-06-03 20:40:05 -04:00
63ac37946d
1. Remove advertising data construction in C: it's all done in Python now
...
2. Add scan response capability to advertising.
2019-06-02 23:21:30 -04:00
12f1d9d30c
fix advertisement length check; add Service.secondary attribute
2019-05-31 18:03:05 -04:00
6cec81bcb5
Need to enable ble before scanning
2019-05-23 22:05:16 -04:00
1639354e5f
Scanner working, but not very first time
2019-05-23 16:07:54 -04:00
9feb844b7e
Fix crash in internal filesystem on nrf
...
Fixes #1842
2019-05-08 15:43:18 -07:00
15b7946fc4
Off-by-one error for usage of MAX_TX_IN_PROGRESS
2019-04-22 22:07:48 -04:00
713a38d1a2
Merge pull request #1754 from dmazzella/dmazzella-patch-1
...
add support for USER_C_MODULES
2019-04-17 09:41:20 -07:00
c0ce820974
Merge pull request #1803 from nickzoic/circuitpython-nickzoic-1042-nrf-nvm-bytearray-3
...
Circuitpython nickzoic 1042 nrf nvm bytearray 3
2019-04-16 15:05:18 -04:00
32a0855d18
Add support for Electronut Labs Papyr.
...
Signed-off-by: Tavish Naruka <tavishnaruka@gmail.com>
2019-04-16 12:59:42 +05:30
9c42a72275
Fix up single-byte access to nvm.ByteArray
2019-04-16 14:53:44 +10:00
83dad37562
Fixups for adafruit/circuitpython#1042
2019-04-16 14:53:44 +10:00
02dd32da60
Make some space for NVM adafruit/circuitpython#1042
2019-04-16 14:53:44 +10:00
f22c01a05e
Switch supervisor/internal_flash to use new nrf_nvm_safe_flash_page_write
...
adafruit/circuitpython#1610
2019-04-16 14:53:44 +10:00
66e8ceafad
switch nvm.ByteArray to use new nrf_nvm_safe_flash_page_write
...
adafruit/circuitpython#1610
2019-04-16 14:53:44 +10:00
fd83cf2048
Add a peripherals/nrf/nvm.c to wrap flash page writes safely
2019-04-16 14:53:44 +10:00
d0e5af3b09
Working flash pages for nvm.ByteArray adafruit/circuitpython#1042
...
import microcontroller
def dump(n = microcontroller.nvm):
for i in range(0,len(n)):
print ("%02X " % n[i], end="")
if i % 16 == 15: print('')
microcontroller.nvm[0:4096] = bytes([1,2,3,4,5,6,7,8]) * 512
microcontroller.nvm[4096:8192] = bytes([16,17,18,19]) * 1024
microcontroller.nvm[4090:4101] = b'thisisatest'
microcontroller.nvm[100:105] = b'hello'
microcontroller.nvm[8000:8007] = b'goodbye'
dump()
2019-04-16 14:53:44 +10:00
531cf7eb4c
switch CIRCUITPY_NVM on!
2019-04-16 14:53:44 +10:00
933500c448
nvm.ByteArray reads & writes but no sensible erase yet adafruit/circuitpython#1042
2019-04-16 14:53:44 +10:00
df89156f2f
Start on nRF nvm.ByteArray adafruit/circuitpython#1042 (doesn't do anything yet)
2019-04-16 14:53:44 +10:00
254d0a53ac
Revert "nrf nvm: touchups to nickzoic PR #1768"
2019-04-15 18:50:33 -07:00
864910559b
fix subscripting
2019-04-10 21:41:55 -04:00
3618461f9b
Merge remote-tracking branch 'adafruit/master' into circuitpython-nickzoic-1042-nrf-nvm-bytearray-2
2019-04-10 14:09:26 -04:00
ac2fd2fa80
Merge pull request #1773 from dhalbert/no-recursive-background-tasks
...
Don't let a background task call run_background_tasks()
2019-04-09 18:39:28 -07:00
d633928a16
Don't let a background task call run_background_tasks()
2019-04-09 20:23:01 -04:00
18908c21f7
Fixups for adafruit/circuitpython#1042
2019-04-09 12:53:11 +10:00
fdaff00c78
Make some space for NVM adafruit/circuitpython#1042
2019-04-09 10:56:53 +10:00
bcb87ffd6c
Switch supervisor/internal_flash to use new nrf_nvm_safe_flash_page_write
...
adafruit/circuitpython#1610
2019-04-09 10:56:53 +10:00
bc92441803
switch nvm.ByteArray to use new nrf_nvm_safe_flash_page_write
...
adafruit/circuitpython#1610
2019-04-09 10:55:39 +10:00
cd69db7770
Add a peripherals/nrf/nvm.c to wrap flash page writes safely
2019-04-09 10:55:39 +10:00
8e7fee2246
Working flash pages for nvm.ByteArray adafruit/circuitpython#1042
...
import microcontroller
def dump(n = microcontroller.nvm):
for i in range(0,len(n)):
print ("%02X " % n[i], end="")
if i % 16 == 15: print('')
microcontroller.nvm[0:4096] = bytes([1,2,3,4,5,6,7,8]) * 512
microcontroller.nvm[4096:8192] = bytes([16,17,18,19]) * 1024
microcontroller.nvm[4090:4101] = b'thisisatest'
microcontroller.nvm[100:105] = b'hello'
microcontroller.nvm[8000:8007] = b'goodbye'
dump()
2019-04-09 10:55:39 +10:00
592bd0140a
switch CIRCUITPY_NVM on!
2019-04-09 10:55:15 +10:00
492431a694
nvm.ByteArray reads & writes but no sensible erase yet adafruit/circuitpython#1042
2019-04-09 10:54:11 +10:00
f8e5e2da64
Start on nRF nvm.ByteArray adafruit/circuitpython#1042 (doesn't do anything yet)
2019-04-09 10:54:11 +10:00
de48e4b262
Merge remote-tracking branch 'adafruit/master' into fix_cpx_display
2019-04-08 17:15:08 -07:00
0f003ac5b8
Reorganize board busses into shared-bindings and shared-module.
2019-04-08 16:58:50 -07:00
049b9ca094
Remove terse TODOs
2019-04-08 14:46:45 -07:00
8323721232
Stop hard-coding SPI frequency in FourWire
...
Instead remember and use the frequency, polarity and phase that was
set when the bus was first created.
2019-04-06 15:15:29 +02:00
8428fa0f64
Update Makefile
2019-04-05 21:42:29 +02:00
ceb6f2e4fc
Rework flash flush so it preserves the cache
...
This should make filesystem writes quicker and cause less heap
churn.
2019-04-03 18:28:27 -07:00
781d301bb6
Remove unnecessary MP_WEAK declarations
2019-04-02 13:33:22 +11:00
92095eb666
Update comment
2019-04-02 13:28:35 +11:00
94bda3bde1
Change nRF RTC implementation to use RTC2 #1046
...
(to avoid interference with Bluetooth Softdevice. See
https://github.com/adafruit/circuitpython/pull/1534#issuecomment-478776240
with thanks to @bboser for pointing it out)
2019-04-02 13:28:22 +11:00
6afe23d0b0
There isn't really a good way to calibrate this RTC adafruit/circuitpython#1046
2019-04-02 13:28:03 +11:00
6206fa9a82
adafruit/circuitpython#1046 handle overflows in the RTC counter
2019-04-02 13:27:45 +11:00
f846fa109e
enable NRFX RTC adafruit/circuitpython#1046
2019-04-02 13:27:28 +11:00
f88f9fd748
more fake RTC code ... adafruit/circuitpython#1046
...
(works if MP_WEAK common_hal_rtc_get_time is removed)
2019-04-02 13:27:13 +11:00
4a5c52fbd6
starting on #1046 rtc for nRF
2019-04-02 13:27:00 +11:00
0653bca323
Revert "Circuitpython nickzoic 1046 nrf rtc"
2019-03-29 16:41:29 -04:00
98811a9675
Update comment
2019-03-28 09:29:18 -07:00
71622a4515
There isn't really a good way to calibrate this RTC adafruit/circuitpython#1046
2019-03-28 09:50:09 +11:00
28254def0b
adafruit/circuitpython#1046 handle overflows in the RTC counter
2019-03-28 09:50:09 +11:00
b09d2c3c62
enable NRFX RTC adafruit/circuitpython#1046
2019-03-28 09:50:09 +11:00
69cf33e6a1
more fake RTC code ... adafruit/circuitpython#1046
...
(works if MP_WEAK common_hal_rtc_get_time is removed)
2019-03-28 09:50:09 +11:00
77f307c642
starting on #1046 rtc for nRF
2019-03-28 09:50:09 +11:00
2c93ce5a28
Merge pull request #1672 from dhalbert/regular-fs-flush
...
flush flash filesystem once a second
2019-03-26 13:47:43 -07:00
f440e41819
Really fix the error messages in bleio, this time
2019-03-25 14:04:50 +01:00
bb10a8aaa1
Fix error messages in bleio
2019-03-25 09:19:48 +01:00
fe555a4098
Allow NFC pins to be used for other purposes.
2019-03-21 11:22:58 -04:00
fbf166af1a
enable MICROPY_CPYTHON_COMPAT for most builds except CIRCUITPY_SMALL_BUILD; remove a few other things to make fit
2019-03-20 14:36:24 -04:00
2459eabd66
flush flash filesystem once a second
2019-03-20 12:21:36 -04:00
9cceea0d68
nrf: fix internal flash writes
2019-03-18 09:11:40 -04:00
c4586c0531
nrf: Disable SPIM3; add SPIM1; remove TWIM1
2019-03-12 08:31:03 -04:00
2cd6a79016
better handle frequencyio inclusion
2019-03-01 22:46:57 -06:00
bd13834a74
implement default busses for particle boards
2019-02-24 09:34:33 -05:00
f3e50b9df2
Merge pull request #1581 from dhalbert/ble-drv-root-pointer
...
Use critical section, not lock, in CharacteristicBuffer; use a root pointer for ble_drv list
2019-02-21 12:28:41 -05:00
99da3b9646
Use critical section, not lock, in CharacteristicBuffer; use a root pointer for ble_drv list
2019-02-21 00:19:31 -05:00
9c24c804fb
Fix #ifdefs in port.c to call xxx_reset() rroutines properly. Remove most uses of EXPRESS_BOARD.
2019-02-18 22:44:31 -05:00
5ec92415b0
fix module weak links; add missing nrf features
2019-02-17 17:29:28 -05:00
7b3f7605b8
address @tannewt changes: move and rename common files; remove PORT_HEAP_SIZE
2019-02-15 20:32:32 -05:00
a345ef28f2
finish Makefile refactoring; nrf builds work
2019-02-15 18:55:10 -05:00
5154e0581e
WIP: atmel-samd trinket build works
2019-02-15 00:28:20 -05:00
ab4194f752
don't allocate DMA buffer as long-lived
2019-02-13 19:49:57 -05:00
e92d90ce9c
Add second UARTE to busio.UART. Init uarts on startup.
2019-02-12 22:34:05 -05:00
9f7d19a937
Change EMERGENCY_EXCEPTION_BUF settings to match samd.
2019-02-11 20:55:06 -08:00
c17f147be9
A variety of displayio improvements
...
This changes a number of things in displayio:
* Introduces BuiltinFont and Glyph so the built in font can be used by libraries. For boards with
a font it is available as board.TERMINAL_FONT. Fixes #1172
* Remove _load_row from Bitmap in favor of bitmap[] access. Index can be x/y tuple or overall index. Fixes #1191
* Add width and height properties to Bitmap.
* Add insert and [] access to Group. Fixes #1518
* Add index param to pop on Group.
* Terminal no longer takes unicode character info. It takes a BuiltinFont instead.
* Fix Terminal's handling of [###D vt100 commands used when up arrowing into repl history.
* Add x and y positions to Group plus scale as well.
* Add bitmap accessor for BuiltinFont
2019-02-11 20:55:05 -08:00
37b9cd5974
Merge pull request #1521 from nickzoic/circuitpython-nickzoic-1045-nrf-rotaryio
...
Circuitpython nickzoic 1045 nrf rotaryio
2019-02-07 10:38:20 -08:00
b9db977a2d
Change pin mode to pullup for adafruit/circuitpython#1045
2019-02-07 09:47:56 +11:00
a7c349bc6e
Add quarter-click logic to adafruit/circuitpython#1045
2019-02-05 16:41:33 +11:00
95454ecde0
useful output from rotaryio adafruit/circuitpython#1045
2019-02-05 16:41:33 +11:00
21eb7e8e64
GPIOTE handlers for rotaryio.IncrementalEncoder adafruit/circuitpython#1045
2019-02-05 14:15:13 +11:00
ee21cc163f
Start on rotaryio.IncrementalEncoder adafruit/circuitpython#1045 (does nothing yet!)
2019-02-05 14:15:03 +11:00
ec03887040
Fix hallowing and nrf builds
2019-01-31 11:42:15 -08:00
a51f2b0716
refactor nrfx from supervisor/usb.c
2019-01-30 22:30:23 +07:00
164e1e2341
re-init usb hardware when enable/disable SD
2019-01-30 14:13:07 +07:00
d1fb384a4a
update tinyusb, work better with sd
2019-01-29 21:03:18 +07:00
765d877dfa
Merge pull request #1499 from nickzoic/nickzoic/circuitpython-nrf-touchin-1048
...
Nickzoic/circuitpython nrf touchin 1048
2019-01-28 00:22:34 -08:00
294b026aca
Automatically set a default threshold for touchio.TouchIn channels
2019-01-28 18:22:57 +11:00
539aaf08b5
speed up measurement loop
2019-01-27 21:54:59 +11:00
4a093294ac
hugely simplified version of the touchio.TouchIn.get_raw_reading code ( adafruit/circuitpython#1048 )
2019-01-27 15:08:03 +11:00
7998a7696d
also handle BLE_GATTS_EVT_SYS_ATTR_MISSING: fixes Android:
2019-01-23 22:12:38 -05:00
b1f1bb1389
support BLE_GAP_EVT_DATA_LENGTH_UPDATE_REQUEST, sent by newer devices
2019-01-23 21:07:23 -05:00
a380865655
Merge remote-tracking branch 'adafruit/master' into HEAD
2019-01-22 14:02:07 -08:00
e170e03f8c
Merge remote-tracking branch 'adafruit/master' into bleio2
2019-01-21 20:38:26 -05:00
28cfd8a513
CharacteristicBuffer: make it be a stream class; add locking
2019-01-19 19:45:35 -05:00
50af08a6f3
Merge branch 'master' into pixelbuf
2019-01-19 16:33:59 -05:00
edc8383e22
Improvements thanks to danh's review
2019-01-18 16:37:06 -08:00
fddc98858a
fix nonetype handling and nrf never reset
2019-01-17 18:51:40 -08:00
6404aaf411
Fix up nrf and using board.SPI in FourWire
2019-01-17 18:19:07 -08:00
760bd8d8a4
share fourwire and make nrf compile
2019-01-17 15:15:59 -08:00
c1e6624f8f
Merge pull request #1470 from gpshead/mdk_usb_dongle
...
Add Makerdiary nRF52840 MDK USB dongle support.
2019-01-15 23:05:15 -08:00
Dan Halbert
Scott Shawcroft
Jeff Epler
jepler
hathach
Dan Halbert
Hierophect
Tavish Naruka
Scott Shawcroft
iot49
Nick Moore
Radomir Dopieralski
Damiano Mazzella
sommersoft
Jerry Needell
Kattni
Roy Hooper