b1be9f50ab
atmel-samd: Remove module name from struct.
2016-09-26 15:02:16 -07:00
eda33385e6
atmel-samd: Correct the stack_top pointer used in garbage collection.
...
Without this fix the gc will consider a large, random section of memory
and it may never finish.
2016-09-22 18:24:06 -07:00
ffdc3f81df
atmel-samd: Note a potential REPL ram savings.
2016-09-22 18:23:27 -07:00
bbeed82378
atmel-samd: Run boot.py and main.py at startup and soft reboot.
2016-09-22 13:56:26 -07:00
e56948650f
atmel-samd: Enable mem_info display.
2016-09-22 13:16:13 -07:00
0e1fd9a12c
atmel-samd: Support ampy get and fix USB dropping characters.
...
Fixes #2 .
2016-09-21 15:13:37 -07:00
dbbb2a5ca4
atmel-samd: Turn off normal errors but turn on source code line reporting.
2016-09-20 15:16:52 -07:00
005122e581
atmel-samd: Remove path specific to me.
2016-09-20 15:16:12 -07:00
0cae6b8e68
atmel-samd: Support const().
2016-09-19 17:30:28 -07:00
0f4f4c7544
atmel-samd: Add sys, fix import and increase the size of the heap.
2016-09-19 16:56:42 -07:00
7fd84e93f4
atmel-samd: Support raw repl and soft reset to support ampy.
...
Closes #1 . Also adds TX and RX led support on the Arduino Zero.
2016-09-15 17:01:19 -07:00
7d8929c470
atmel-samd: Add I2C support.
...
This commit also introduces a new shared-bindings directory which is used to store the common Python -> C binding code. By having a shared directory we can ensure that the Python API across ports is the same. Each port will have a corresponding common-hal directory which provides definitions for the C api used in the shared-bindings code. That way the compiler can enforce the C api.
To migrate to this new shared API create a common-hal directory within your port and change the Makefile to compile both the shared-bindings and common-hal files. See atmel-samd/Makefile SRC_BINDINGS for an example.
2016-09-13 11:46:22 -07:00
05368d2c58
Include the precompiled math library from ASF.
2016-09-07 14:35:40 -07:00
09be96a6aa
atmel/samd: Add filesystem support. 64k is stored in flash.
2016-09-02 17:00:30 -07:00
559434afca
atmel-samd: Support floats.
2016-08-31 13:37:43 -07:00
594ff413f4
trifecta tools
2016-08-31 13:38:13 -04:00
1725710feb
atmel-samd: Rename the Feather M0 BLE to Feather M0 Bluefruit LE.
2016-08-31 09:56:06 -07:00
a6bc701917
atmel-samd: Re-enable -Os (size) optimizations.
2016-08-31 00:16:39 -07:00
eff137a5f5
atmel/samd: Support CTRL-C on USB. This won't escape native code but it will cause Python code to stop.
2016-08-31 00:11:56 -07:00
ccb309bd5c
atmel/samd: Add basic PWM support which only allows for changing the duty.
2016-08-30 13:10:52 -07:00
b883a15d82
atmel-samd: Rename module classes so they don't conflict with names from ASF.
2016-08-28 00:02:05 -07:00
16fc045509
atmel-samd: Add direct write access to the DAC output.
2016-08-27 15:04:34 -07:00
259ae8a39d
atmel-samd: Initial ADC support.
2016-08-26 17:01:38 -07:00
3cb4938c63
atmel-samd: Support Digital IO pins.
...
Also bumps up the heap size.
2016-08-24 17:38:08 -07:00
258804ab16
atmel-samd: Add limited time module support.
2016-08-24 13:17:55 -07:00
0c4f9b878a
Enable REPL over USB.
...
All of the code was there except the linker was failing to clear the bss section because I added too many .zeros. The should have only been the exported globals that start with _ like _szero = .. Fixing that and turn on the usb transmit fixed everything.
2016-08-24 00:14:11 -07:00
386ab580cd
Change the board information used in the header to be board specific.
2016-08-23 17:36:29 -07:00
9485634d41
Add support for REPL on Arduino Zero through EDBG via UART.
2016-08-23 16:47:53 -07:00
8f26d181c3
Blinking the LED works. Clocks should be set up correctly.
...
Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-22 23:53:11 -07:00
a5f6cb3c57
Compiled and linked SAMD21x18 version successfully.
2016-08-22 23:53:10 -07:00
Scott Shawcroft
ladyada