d06a7c4671
Correct HiiBot BlueFi USB_PID
...
Donated a PID set for HiiBot BlueFi.
2020-05-27 11:47:15 -04:00
19f0d82048
Merge pull request #2955 from BradChan/master
...
Add hiibot_bluefi board definitions
2020-05-26 15:37:35 -04:00
f002c784c0
nrf: linker: add a new .uninitialized section
...
This section immediately follows the .bss section, and is designed to
contain uninitialized variables that should persist across reboots.
The section is placed directly after .bss, under the theory that the
size of Circuit Python's .bss + .data is bigger than the bootloader's
.bss + .data, so there is less likely to be a conflict.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-18 11:52:17 +08:00
4f7b4241a2
add hiibot_bluefi
2020-05-18 09:42:37 +08:00
ffaeeda749
nrf: simmel: decrease flash filesystem size
...
The flash filesystem must be reduced in order to allow the current
build to fit.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-12 09:31:51 +08:00
f7fcd43516
nrf: simmel: disable SPIM3
...
Disable the SPIM3 controller to avoid needing to dedicate 8 kB to
the SPIM3 block.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-12 09:31:51 +08:00
79c055f958
nrf: simmel: enable aesio
...
This adds AES support to simmel.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-12 09:31:51 +08:00
235098efb8
nrf: simmel: correct CSn pin
...
The CSn pin is pin 6 on bank 1, not bank 0.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-12 09:31:51 +08:00
62b835ad76
Merge pull request #2833 from xiongyihui/pitaya-go
...
add nRF52840 based Makerdiary Pitaya Go
2020-05-11 16:34:27 -07:00
bae7a5e433
make translate again
2020-05-04 17:26:59 -04:00
4d7e341e44
Merge pull request #2844 from xobs/add-nrf-pca10100
...
nrf: add pca10100
2020-05-04 10:51:01 -04:00
b128399d1e
nrf: simmel: enable CIRCUITPY_USB_HID
...
Simmel had USB HID disabled in order to save space. However, the board
configuration did not set USB_DEVICES, causing it to inherit the default
device bouquet of MSC,CDC,MIDI,HID. This in turn caused HID to be included
in the USB Configuration Descriptor.
For some reason, this was not a problem in an earlier version of tinyusb or
circuitpython. However, in the most recent version this has rightfully
caused asserts to appear during configuration.
Re-enable USB_HID for now, as it doesn't add too much in terms of space.
We may disable it again later on if we become pressed for space.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-04 15:37:53 +08:00
cb4fc894d7
nrf: add pca10100
...
This is the nRF52833-DK board.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-04 15:07:49 +08:00
7dd3ddc06b
use Nordic's VID which seems to be allowed
...
https://devzone.nordicsemi.com/f/nordic-q-a/50638/usb-pid-for-nrf52840
2020-05-01 06:10:43 +00:00
1ca90572f1
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-04-30 13:25:31 -07:00
74a2d0944a
Merge pull request #2834 from Teknikio/fix/bluebird_pinout
...
Update teknikio bluebird pin assignments
2020-04-30 11:50:02 -07:00
36a71560c2
update teknikio bluebird pin assignments
2020-04-30 09:58:27 -04:00
4393a88fb6
add nRF52840 based Makerdiary Pitaya Go
2020-04-30 07:38:20 +00:00
180f5c6a94
Merge remote-tracking branch 'adafruit/master' into ringbuf-fixes
2020-04-29 22:11:22 -04:00
a30ff70b4e
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-04-29 10:51:21 -07:00
1d0781bf12
nrf: add simmel board
...
This adds support for Simmel, an nRF52833-based bluetooth tracking
board designed to aid in pandemic tracing.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-29 11:40:00 +08:00
b9e494b85a
add submodule to TG-Watch02A
2020-04-28 00:03:02 -04:00
76b466a38a
add submodule to TG-Watch02A
2020-04-27 22:49:30 -04:00
755d404edf
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-04-27 16:45:10 -07:00
77cd93ac2d
merge from adafruit
2020-04-21 17:47:51 -04:00
38ec3bc574
further ringbuf cleanup
2020-04-21 17:38:20 -04:00
3ed5b87b8f
nrf: add support for nrf52833
...
This adds preliminary support for the nRF52833, which is a variant of
the nRF52840 with half the RAM, half the flash, and fewer peripherals.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-21 12:29:56 +08:00
b580b34cbf
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-04-14 17:14:44 -07:00
09dc46a984
Add Protomatter and FramebufferDisplay
2020-04-14 18:24:54 -05:00
8fe512c7e9
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-03-31 15:13:58 -07:00
54e8c63b4f
Merge pull request #2730 from tannewt/fix_fourwire_phase_polarity
...
Add polarity and phase to FourWire.
2020-03-28 07:28:37 -05:00
798118b74f
Update board.c's to remove remaining tick.h
2020-03-27 14:52:35 -07:00
b043384949
Update built in display init
2020-03-27 14:35:29 -07:00
9e0c00dfd4
adding a backlight polarity flag to Display
2020-03-25 22:51:20 -07:00
7bba79363a
allowing backlight change
2020-03-25 22:41:23 -07:00
85f44e20cb
Merge pull request #2695 from TG-Techie/master
...
Add new TG-Watch02A to the nrf boards directory
2020-03-13 10:46:48 -07:00
197dc344af
fix requested changes
2020-03-12 02:31:13 -04:00
b967a2071f
changed TG-Watch02A HW_BOARD_NAME
2020-03-10 23:07:25 -04:00
50b451ae0c
add TG-Watch02A board def
2020-03-10 22:40:55 -04:00
fec84054d9
ah
2020-03-06 15:03:37 -05:00
7198056bc3
Merge pull request #2 from adafruit/5.0.x
...
5.0.x
2020-03-06 13:57:31 -05:00
b6206406de
new pin validation routines; don't use mp_const_none if NULL will do
2020-02-28 23:43:04 -05:00
527eb2444c
added TG-Watch02A pins
2020-02-28 04:11:54 -05:00
6d4ffc69fd
add TG-Watch02A
2020-02-28 02:52:46 -05:00
86e9fd170a
move red LED to D13 and make D3 lsm6ds IRQ
2020-02-25 18:00:23 -05:00
e97b0cfc61
Merge pull request #2581 from jamesbowman/master
...
First draft of eveL, the low-level module of the Gameduino bindings
2020-02-13 11:21:32 -08:00
e00b3269fe
use properly-sized SPI transactions
2020-02-12 15:04:19 -05:00
2e029d55fc
nrf: add SPIM3 support
2020-02-11 19:22:14 -05:00
3bf4b42e2e
change OH20 badge pin defs to use SWn for buttons
...
Rather than use A, B, C and D
Use the buttons according to silkscreen references:
SW1
SW2
SW3
SW4
2020-02-10 00:49:13 +01:00
0a54f88751
add pin defs for buttons on the OHS2020 badge
2020-02-10 00:32:16 +01:00
Dan Halbert
Sean Cross
cyz
Scott Shawcroft
Dan Halbert
Yihui Xiong
Scott Shawcroft
JoeBakalor
TG-Techie
Jeff Epler
Jeff Epler
siddacious
TG-Techie
ladyada
Drew Fustini