Testing performed: That a card is successfully mounted on Pygamer with
the built in SD card slot
This module is enabled for most FULL_BUILD boards, but is disabled for
samd21 ("M0"), litex, and pca10100 for various reasons.
I noticed that this code was referring to samd-specific functionality,
and isn't enabled except in one samd board (pewpew10). Move it.
There is incomplte support for _pew in mimxrt10xx which then caused build
errors; adding a #if guard to check for _pew being enabled fixes it.
The _pew module is not likely to be important on mimxrt but I'll leave the
choice to remove it to someone else.
* Fix flash writes that don't end on a sector boundary. Fixes#2944
* Fix enum incompatibility with IDF.
* Fix printf output so it goes out debug UART.
* Increase stack size to 8k.
* Fix sleep of less than a tick so it doesn't crash.
Length was stored as a 16-bit number always. Most translations have
a max length far less. For example, US English translation lengths
always fit in just 8 bits. probably all languages fit in 9 bits.
This also has the side effect of reducing the alignment of
compressed_string_t from 2 bytes to 1.
testing performed: ran in german and english on pyruler, printed messages
looked right.
Firmware size, en_US
Before: 3044 bytes free in flash
After: 3408 bytes free in flash
Firmware size, de_DE (with #2967 merged to restore translations)
Before: 1236 bytes free in flash
After: 1600 bytes free in flash
This adds an exception to be raised when the WatchDogTimer times out.
Note that this currently causes a HardFault, and it's not clear why it's
not behaving properly.
Signed-off-by: Sean Cross <sean@xobs.io>
vectorio builds on m4 express feather
Concrete shapes are composed into a VectorShape which is put into a displayio Group for display.
VectorShape provides transpose and x/y positioning for shape implementations.
Included Shapes:
* Circle
- A radius; Circle is positioned at its axis in the VectorShape.
- You can freely modify the radius to grow and shrink the circle in-place.
* Polygon
- An ordered list of points.
- Beteween each successive point an edge is inferred. A final edge closing the shape is inferred between the last
point and the first point.
- You can modify the points in a Polygon. The points' coordinate system is relative to (0, 0) so if you'd like a
top-center justified 10x20 rectangle you can do points [(-5, 0), (5, 0), (5, 20), (0, 20)] and your VectorShape
x and y properties will position the rectangle relative to its top center point
* Rectangle
A width and a height.
This adds initial support for an AES module named aesio. This
implementation supports only a subset of AES modes, namely
ECB, CBC, and CTR modes.
Example usage:
```
>>> import aesio
>>>
>>> key = b'Sixteen byte key'
>>> cipher = aesio.AES(key, aesio.MODE_ECB)
>>> output = bytearray(16)
>>> cipher.encrypt_into(b'Circuit Python!!', output)
>>> output
bytearray(b'E\x14\x85\x18\x9a\x9c\r\x95>\xa7kV\xa2`\x8b\n')
>>>
```
This key is 16-bytes, so it uses AES128. If your key is 24- or 32-
bytes long, it will switch to AES192 or AES256 respectively.
This has been tested with many of the official NIST test vectors,
such as those used in `pycryptodome` at
39626a5b01/lib/Crypto/SelfTest/Cipher/test_vectors/AES
CTR has not been tested as NIST does not provide test vectors for it.
Signed-off-by: Sean Cross <sean@xobs.io>
This gets all the purely internal references. Some uses of
protomatter/Protomatter/PROTOMATTER remain, as they are references
to symbols in the Protomatter C library itself.
I originally believed that there would be a wrapper library around it,
like with _pixelbuf; but this proves not to be the case, as there's
too little for the library to do.
Formerly, if you wrote
SPI.frequency = 0
you would get the sightly erroneous error message
AttributeError: 'SPI' object has no attribute 'frequency'
In this case, a better message would read
AttributeError: 'SPI' object cannot assign attribute 'frequency'
This new message will both be used in the case where the attribute doesn't
exist at all (and the object has no dynamic attributes; most instances of
built in types behave this way), or if the attribute exists but is
read-only.
This should reclaim *most* code space added to handle f-strings.
However, there may be some small code growth as parse_string_literal
takes a new parameter (which will always be 0, so hopefully the optimizer
eliminates it)
This implements (most of) the PEP-498 spec for f-strings, with two
exceptions:
- raw f-strings (`fr` or `rf` prefixes) raise `NotImplementedError`
- one special corner case does not function as specified in the PEP
(more on that in a moment)
This is implemented in the core as a syntax translation, brute-forcing
all f-strings to run through `String.format`. For example, the statement
`x='world'; print(f'hello {x}')` gets translated *at a syntax level*
(injected into the lexer) to `x='world'; print('hello {}'.format(x))`.
While this may lead to weird column results in tracebacks, it seemed
like the fastest, most efficient, and *likely* most RAM-friendly option,
despite being implemented under the hood with a completely separate
`vstr_t`.
Since [string concatenation of adjacent literals is implemented in the
lexer](534b7c368d),
two side effects emerge:
- All strings with at least one f-string portion are concatenated into a
single literal which *must* be run through `String.format()` wholesale,
and:
- Concatenation of a raw string with interpolation characters with an
f-string will cause `IndexError`/`KeyError`, which is both different
from CPython *and* different from the corner case mentioned in the PEP
(which gave an example of the following:)
```python
x = 10
y = 'hi'
assert ('a' 'b' f'{x}' '{c}' f'str<{y:^4}>' 'd' 'e') == 'ab10{c}str< hi >de'
```
The above-linked commit detailed a pretty solid case for leaving string
concatenation in the lexer rather than putting it in the parser, and
undoing that decision would likely be disproportionately costly on
resources for the sake of a probably-low-impact corner case. An
alternative to become complaint with this corner case of the PEP would
be to revert to string concatenation in the parser *only when an
f-string is part of concatenation*, though I've done no investigation on
the difficulty or costs of doing this.
A decent set of tests is included. I've manually tested this on the
`unix` port on Linux and on a Feather M4 Express (`atmel-samd`) and
things seem sane.
Before this, such names would instead cause an assertion error inside
qstr_from_strn.
A simple reproducer is a python source file containing the letter "a"
repeated 256 times
This only fixes the `import` portion. It doesn't actually change
reference behavior because modules within a package could already
be referenced through the parent package even though an error should
have been thrown.
Introduces a way to place CircuitPython code and data into
tightly coupled memory (TCM) which is accessible by the CPU in a
single cycle. It also frees up room in the corresponding cache for
intermittent data. Loading from external flash is slow!
The data cache is also now enabled.
Adds support for the iMX RT 1021 chip. Adds three new boards:
* iMX RT 1020 EVK
* iMX RT 1060 EVK
* Teensy 4.0
Related to #2492, #2472 and #2477. Fixes#2475.
In this unusual case, (len + 1) is zero, the allocation in vstr_init
succeeds (allocating 1 byte), and then the caller is likely to erroneously
access outside the allocated region, for instance with a memset().
This could be triggered with os.urandom(-1) after it was converted to use
mp_obj_new_bytes_of_zeros.
PacketBuffer facilitates packet oriented BLE protocols such as BLE
MIDI and the Apple Media Service.
This also adds PHY, MTU and connection event extension negotiation
to speed up data transfer when possible.
By having an order-only dependency on the directory itself, the directory
is sure to be created before the rule to create a .mo file is.
This fixes a low-freqency error on github actions such as
> msgfmt: error while opening "build/genhdr/en_US.mo" for writing: No such file or directory
These s16-s21 registers are used by gcc so need to be saved. Future
versions of gcc (beyond v9.1.0), or other compilers, may eventually need
additional registers saved/restored.
See issue #4844.
Recent versions of gcc perform optimisations which can lead to the
following code from the MP_NLR_JUMP_HEAD macro being omitted:
top->ret_val = val; \
MP_NLR_RESTORE_PYSTACK(top); \
*_top_ptr = top->prev; \
This is noticeable (at least) in the unix coverage on x86-64 built with gcc
9.1.0. This is because the nlr_jump function is marked as no-return, so
gcc deduces that the above code has no effect.
Adding MP_UNREACHABLE tells the compiler that the asm code may branch
elsewhere, and so it cannot optimise away the code.
Protocols are nice, but there is no way for C code to verify whether
a type's "protocol" structure actually implements some particular
protocol. As a result, you can pass an object that implements the
"vfs" protocol to one that expects the "stream" protocol, and the
opposite of awesomeness ensues.
This patch adds an OPTIONAL (but enabled by default) protocol identifier
as the first member of any protocol structure. This identifier is
simply a unique QSTR chosen by the protocol designer and used by each
protocol implementer. When checking for protocol support, instead of
just checking whether the object's type has a non-NULL protocol field,
use `mp_proto_get` which implements the protocol check when possible.
The existing protocols are now named:
protocol_framebuf
protocol_i2c
protocol_pin
protocol_stream
protocol_spi
protocol_vfs
(most of these are unused in CP and are just inherited from MP; vfs and
stream are definitely used though)
I did not find any crashing examples, but here's one to give a flavor of what
is improved, using `micropython_coverage`. Before the change,
the vfs "ioctl" protocol is invoked, and the result is not intelligible
as json (but it could have resulted in a hard fault, potentially):
>>> import uos, ujson
>>> u = uos.VfsPosix('/tmp')
>>> ujson.load(u)
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ValueError: syntax error in JSON
After the change, the vfs object is correctly detected as not supporting
the stream protocol:
>>> ujson.load(p)
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
OSError: stream operation not supported
If a translation only has unicode code points 255 and below, the "values"
array can be 8 bits instead of 16 bits. This reclaims some code size,
e.g., in a local build, trinket_m0 / en_US reclaimed 112 bytes and de_DE
reclaimed 104 bytes. However, languages like zh_Latn_pinyin, which use
code points above 255, did not benefit.
By treating each unicode code-point as a single entity for huffman
compression, the overall compression rate can be somewhat improved
without changing the algorithm. On the decompression side, when
compressed values above 127 are encountered, they need to be
converted from a 16-bit Unicode code point into a UTF-8 byte
sequence.
Doing this returns approximately 1.5kB of flash storage with the
zh_Latn_pinyin translation. (292 -> 1768 bytes remaining in my build
of trinket_m0)
Other "more ASCII" translations benefit less, and in fact
zh_Latn_pinyin is no longer the most constrained translation!
(de_DE 1156 -> 1384 bytes free in flash, I didn't check others
before pushing for CI)
English is slightly pessimized, 2840 -> 2788 bytes, probably mostly
because the "values" array was changed from uint8_t to uint16_t,
which is strictly not required for an all-ASCII translation. This
could probably be avoided in this case, but as English is not the
most constrained translation it doesn't really matter.
Testing performed: built for feather nRF52840 express and trinket m0
in English and zh_Latn_pinyin; ran and verified the localized
messages such as
Àn xià rènhé jiàn jìnrù REPL. Shǐyòng CTRL-D chóngxīn jiāzài.
and
Press any key to enter the REPL. Use CTRL-D to reload.
were properly displayed.
When adding the ability for boards to turn on the `@micropython.native`, `viper`, and `asm_thumb` decorators it was pointed out that it's somewhat awkward to write libraries and drivers that can take advantage of this since the decorators raise `SyntaxErrors` if they aren't enabled. In the case of `viper` and `asm_thumb` this behavior makes sense as they require writing non-normative code. Drivers could have a normal and viper/thumb implementation and implement them as such:
```python
try:
import _viper_impl as _impl
except SyntaxError:
import _python_impl as _impl
def do_thing():
return _impl.do_thing()
```
For `native`, however, this behavior and the pattern to work around it is less than ideal. Since `native` code should also be valid Python code (although not necessarily the other way around) using the pattern above means *duplicating* the Python implementation and adding `@micropython.native` in the code. This is an unnecessary maintenance burden.
This commit *modifies* the behavior of the `@micropython.native` decorator. On boards with `CIRCUITPY_ENABLE_MPY_NATIVE` turned on it operates as usual. On boards with it turned off it does *nothing*- it doesn't raise a `SyntaxError` and doesn't apply optimizations. This means we can write our drivers/libraries once and take advantage of speedups on boards where they are enabled.
This improves performance of running python code by 34%, based
on the "pystone" benchmark on metro m4 express at 5000 passes
(1127.65 -> 1521.6 passes/second).
In addition, by instrumenting the tick function and monitoring on an
oscilloscope, the time actually spent in run_background_tasks() on
the metro m4 decreases from average 43% to 0.5%. (however, there's
some additional overhead that is moved around and not accounted for
in that "0.5%" figure, each time supervisor_run_background_tasks_if_tick
is called but no tick has occurred)
On the CPB, it increases pystone from 633 to 769, a smaller percentage
increase of 21%. I did not measure the time actually spent in
run_background_tasks() on CPB.
Testing performed: on metro m4 and cpb, run pystone adapted from python3.4
(change time.time to time.monotonic for sub-second resolution)
Besides running a 5000 pass test, I also ran a 50-pass test while
scoping how long an output pin was set. Average: 34.59ms or 1445/s on m4,
67.61ms or 739/s on cbp, both matching the other pystone result reasonably
well.
import pystone
import board
import digitalio
import time
d = digitalio.DigitalInOut(board.D13)
d.direction = digitalio.Direction.OUTPUT
while True:
d.value = 0
time.sleep(.01)
d.value = 1
pystone.main(50)
This code is shared by most parts, except where not all the #ifdefs
inside the tick function were present in all ports. This mostly would
have broken gamepad tick support on non-samd ports.
The "ms32" and "ms64" variants of the tick functions are introduced
because there is no 64-bit atomic read. Disabling interrupts avoids
a low probability bug where milliseconds could be off by ~49.5 days
once every ~49.5 days (2^32 ms).
Avoiding disabling interrupts when only the low 32 bits are needed is a minor
optimization.
Testing performed: on metro m4 express, USB still works and
time.monotonic_ns() still counts up
To benefit from gcc's "once-only headers" implementation, the
"wrapper-#ifndef" must be the first non-comment part of the file,
according to the manual for various gcc/cpp versions.
