Glenn Ruben Bakke
|
3b2ca64738
|
nrf5/boards: Remove define of machine PWM module configuration in nrf51 targets, as the device does not have a HW PWM peripheral.
|
2017-03-07 18:05:38 +01:00 |
|
Glenn Ruben Bakke
|
9689aae45b
|
nrf5/boards: Disable all display modules in pca10028 board config.
|
2017-03-07 18:01:13 +01:00 |
|
Glenn Ruben Bakke
|
5f705adae0
|
nrf5/boards: Adding more heap memory to the nrf51 256k/32k s110 linker script. Leaving 2k for stack.
|
2017-03-07 17:41:46 +01:00 |
|
Glenn Ruben Bakke
|
4a631a0d47
|
nrf5/boards: Renaming linker script for all nrf51 and nrf52 into more logical names. Updating all boards with new names.
|
2017-03-04 19:13:59 +01:00 |
|
Glenn Ruben Bakke
|
80c9c2e3c0
|
nrf5/boards: Adding support for SPI, I2C, ADC, and Temp in machine modules in micro:bit target. Also activating hal drivers for the peripherals.
|
2017-03-04 02:14:50 +01:00 |
|
Glenn Ruben Bakke
|
ef6d583ec3
|
nrf5/boards: Updating nrf51822_aa_s110.ld to be more generic, leaving all RAM not used for stack, .bss and .data to the heap.
|
2017-03-04 01:29:05 +01:00 |
|
Glenn Ruben Bakke
|
2af06bd3fa
|
nrf5/boards: Adding BLUETOOTH_LFCLK_RC to CFLAGS in microbit s110 makefile.
|
2017-03-03 23:21:47 +01:00 |
|
glennrub
|
c1ffac9998
|
Merge pull request #1 from ajbaabf/nrf5_no_sdk
added support for hardware temperature sensor
|
2017-02-28 08:33:11 +01:00 |
|
Bander Ajba
|
66542c34b9
|
did required modification to merge the temperature sensore module
|
2017-02-26 11:17:07 +03:00 |
|
Bander Ajba
|
378c40b4da
|
did required modification to merge the temperature sensore module
|
2017-02-26 11:14:17 +03:00 |
|
Glenn Ruben Bakke
|
e60a06563e
|
nrf5/boards: Updating pca10028 bluetooth stack targets to have a MCU_SUB_VARIANT.
|
2017-02-24 15:03:53 +01:00 |
|
Bander Ajba
|
3882b0e2ff
|
added support for hardware temperature sensor
|
2017-02-24 00:38:08 +03:00 |
|
Glenn Ruben Bakke
|
486d05ff17
|
nrf5/boards: Releasing more RAM for heap use in the nrf51 s110 linker script.
|
2017-02-19 19:00:31 +01:00 |
|
Glenn Ruben Bakke
|
4ddc213d7f
|
nrf5/boards: Updating board makefiles for s132 and s1xx target for pca10040 (nrf52832) by adding sub variant and device define to the makefiles.
|
2017-02-03 19:28:16 +01:00 |
|
Glenn Ruben Bakke
|
5e9e48e9e3
|
nrf5: Renaming configuration define in board configs using i2c from MICROPY_PY_MACHINE_HW_I2C to MICROPY_PY_MACHINE_I2C as the config is overlapping with the latter.
|
2017-02-02 18:43:12 +01:00 |
|
Glenn Ruben Bakke
|
4cbdbc9a4b
|
nrf5: Renaming configuration define in board configs using i2c from MICROPY_PY_MACHINE_HW_I2C to MICROPY_PY_MACHINE_I2C as the config is overlapping with the latter.
|
2017-02-02 18:41:44 +01:00 |
|
Glenn Ruben Bakke
|
0066f226aa
|
nrf5/boards: Activating all display drivers in pca10056 board.
|
2017-02-02 18:29:51 +01:00 |
|
Glenn Ruben Bakke
|
44daeb7d94
|
nrf5/boards: Updating s110 SD linker script for micro:bit.
|
2017-02-02 18:08:28 +01:00 |
|
Glenn Ruben Bakke
|
9009ad67b0
|
nrf5/boards: Updating boards to comply to new style of configuring pins for uart and spi.
|
2017-01-26 22:29:58 +01:00 |
|
Glenn Ruben Bakke
|
6387490e4a
|
nrf5/boards: Updating board configuration for pca10056 (nrf52840) with new pin configuration scheme for SPI and UART.
|
2017-01-26 22:15:35 +01:00 |
|
Glenn Ruben Bakke
|
0fdcd2eac7
|
nrf5/boards: Adding ssd1289 lcd module in pca10040 (nrf52832) board.
|
2017-01-25 19:51:14 +01:00 |
|
Glenn Ruben Bakke
|
e40c385c6a
|
nrf5: Syncing code after upmerge with master.
|
2017-01-22 22:18:44 +01:00 |
|
Glenn Ruben Bakke
|
8e6b51a605
|
nrf5/boards: Enable LS0XXB7DXXX display module in pca10056 board config.
|
2017-01-19 20:46:58 +01:00 |
|
Glenn Ruben Bakke
|
00a59ed8d6
|
nrf5/boards: Enable ssd1305 oled display to be default for pca10028 for now.
|
2017-01-16 23:39:50 +01:00 |
|
Glenn Ruben Bakke
|
73be85dd6d
|
nrf52/boards: Increasing the stack and heap in pca10056 (nrf52840) target from 2k/32k to 40k/128k to debug some buffer problems when running large frozen python programs.
|
2017-01-15 19:39:57 +01:00 |
|
Glenn Ruben Bakke
|
c6fc0a134c
|
nrf51/boards: Increasing heap and stack size in the pca10028 board.
|
2017-01-15 19:37:53 +01:00 |
|
Glenn Ruben Bakke
|
7edea7848d
|
nrf51/boards: Enable display driver and oled ssd1306 (also bringing in framebuffer and graphics module) into the pca10028 target.
|
2017-01-15 19:34:52 +01:00 |
|
Glenn Ruben Bakke
|
c87716d715
|
nrf5/boards: Adding ADC pins in pins.csv file for pca10056 (nrf52840).
|
2017-01-15 17:53:30 +01:00 |
|
Glenn Ruben Bakke
|
a5bb966614
|
nrf5/boards: Updating pca10028 (nrf51) board config. Enable SPI machine module. Enable flow control on UART. Correcting SPI CLK, MISO and MOSI pin assignments.
|
2017-01-12 19:54:07 +01:00 |
|
Glenn Ruben Bakke
|
994341fc3b
|
nrf5/boards: Enabling ADCE (SAADC) variant of adc hal to match hardware on nrf52 series.
|
2017-01-11 20:19:31 +01:00 |
|
Glenn Ruben Bakke
|
3e112c40f3
|
nrf5/boards: Adding ADC config to pca10028 pins.csv
|
2017-01-11 20:18:04 +01:00 |
|
Glenn Ruben Bakke
|
8349fd0bb9
|
nrf5/boards: Tuning linker script for nrf51822_ac to get some more heap.
|
2017-01-11 20:14:53 +01:00 |
|
Glenn Ruben Bakke
|
5d5d06ff41
|
nrf5/boards: Updating make-pins.py to generate ADC pin settings from board pins.csv.
|
2017-01-11 20:12:32 +01:00 |
|
Glenn Ruben Bakke
|
a0b0e13785
|
nrf5/boards: Enable ADC machine module for pca10028, pca10040 and pca10056.
|
2017-01-11 17:28:38 +01:00 |
|
Glenn Ruben Bakke
|
7016ece34d
|
nrf5/boards: Enable ADC/SAADC hal for pca10028 (nrf51), pca10040 (nrf52832) and pca10056 (nrf52840) boards.
|
2017-01-11 17:04:08 +01:00 |
|
Glenn Ruben Bakke
|
383db817f9
|
nrf5/boards: Enable hardware I2C machine module for pca10028 (nrf51), pca10040 (nrf52832) and pca10056 (nrf52840) boards.
|
2017-01-11 16:54:00 +01:00 |
|
Glenn Ruben Bakke
|
8ca63e7196
|
nrf5/boards: Enable TWI hal for pca10028 (nrf51), pca10040 (nrf52832) and pca10056 (nrf52840) boards.
|
2017-01-11 16:52:45 +01:00 |
|
Glenn Ruben Bakke
|
28e1e506f6
|
nrf5/boards: Enable SSD1306 spi driver for pca10040 (nrf52832) and pca10056 (nrf52840) boards.
|
2017-01-10 18:28:11 +01:00 |
|
Glenn Ruben Bakke
|
dd7007240c
|
nrf5/boards: Enable PWM module and epaper display module in pca10056 board config.
|
2017-01-09 19:44:31 +01:00 |
|
Glenn Ruben Bakke
|
4ca61a9d0e
|
nrf5/boards: Giving a bit more heap for nrf52840 linker script.
|
2017-01-08 22:34:48 +01:00 |
|
Glenn Ruben Bakke
|
268d988553
|
nrf5/boards: Enabling spi in pca10056 hal config.
|
2017-01-08 21:19:23 +01:00 |
|
Glenn Ruben Bakke
|
c8cc2aa6f9
|
nrf5/boards: Enabling ili9341 display drivers and to be compiled in on pca10056 target board. Updating SPI configuration with gpio port.
|
2017-01-08 21:18:18 +01:00 |
|
Glenn Ruben Bakke
|
bc22cc9ce8
|
nrf5/boards: Enabling display drivers/spi/pwm to be compiled in on pca10040 target board. Updating SPI configuration with gpio port.
|
2017-01-08 21:16:41 +01:00 |
|
Glenn Ruben Bakke
|
43a2355665
|
nrf5: Updating pin, spi and uart to use port configuration for gpio pins. Update pin generation script, macros for PIN generation. Updating macros for setting pin values adding new port parameter to select the correct GPIO peripheral port.
|
2017-01-08 16:40:18 +01:00 |
|
Glenn Ruben Bakke
|
014e650499
|
nrf5/boards: Disable SPI hal from pca10001 board.
|
2017-01-08 16:28:18 +01:00 |
|
Glenn Ruben Bakke
|
ec44f6427b
|
nrf5/boards: Disable SPI/Timer/RTC hal from microbit board.
|
2017-01-08 16:27:35 +01:00 |
|
Glenn Ruben Bakke
|
392e226b2c
|
nrf5/boards: Adding more pins to nrf52840 / pca10056 target board.
|
2017-01-08 16:16:29 +01:00 |
|
Glenn Ruben Bakke
|
6973c13608
|
nrf5/boards: Updating all board configs with gpio port configuration for uart/spi pins. Leds still not defined by gpio port.
|
2017-01-08 16:04:52 +01:00 |
|
Glenn Ruben Bakke
|
4f04eed4c5
|
nrf5/boards: Updating makefiles to use system.c files based on sub-variant of mcu.
|
2017-01-08 15:15:36 +01:00 |
|
Glenn Ruben Bakke
|
56d187b942
|
nrf5/boards: Changing tft lcd display name from SLD10261P to ILI9341 in pca10040 board configuration.
|
2017-01-05 19:59:25 +01:00 |
|