Glenn Ruben Bakke c6fc0a134c nrf51/boards: Increasing heap and stack size in the pca10028 board.		2017-01-15 19:37:53 +01:00
..
microbit	nrf5/boards: Disable SPI/Timer/RTC hal from microbit board.	2017-01-08 16:27:35 +01:00
pca10000	nrf5/boards: Updating all board configs with gpio port configuration for uart/spi pins. Leds still not defined by gpio port.	2017-01-08 16:04:52 +01:00
pca10001	nrf5/boards: Disable SPI hal from pca10001 board.	2017-01-08 16:28:18 +01:00
pca10028	nrf51/boards: Enable display driver and oled ssd1306 (also bringing in framebuffer and graphics module) into the pca10028 target.	2017-01-15 19:34:52 +01:00
pca10031	nrf5/boards: Updating all board configs with gpio port configuration for uart/spi pins. Leds still not defined by gpio port.	2017-01-08 16:04:52 +01:00
pca10040	nrf5/boards: Enabling ADCE (SAADC) variant of adc hal to match hardware on nrf52 series.	2017-01-11 20:19:31 +01:00
pca10056	nrf5/boards: Adding ADC pins in pins.csv file for pca10056 (nrf52840).	2017-01-15 17:53:30 +01:00
common.ld	nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).	2016-12-13 20:27:26 +01:00
make-pins.py	nrf5/boards: Updating make-pins.py to generate ADC pin settings from board pins.csv.	2017-01-11 20:12:32 +01:00
nrf51_prefix.c	nrf5: Updating pin, spi and uart to use port configuration for gpio pins. Update pin generation script, macros for PIN generation. Updating macros for setting pin values adding new port parameter to select the correct GPIO peripheral port.	2017-01-08 16:40:18 +01:00
nrf52_prefix.c	nrf5: Updating pin, spi and uart to use port configuration for gpio pins. Update pin generation script, macros for PIN generation. Updating macros for setting pin values adding new port parameter to select the correct GPIO peripheral port.	2017-01-08 16:40:18 +01:00
nrf51822_aa.ld	nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).	2016-12-13 20:27:26 +01:00
nrf51822_aa_s110.ld	nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).	2016-12-13 20:27:26 +01:00
nrf51822_ac.ld	nrf51/boards: Increasing heap and stack size in the pca10028 board.	2017-01-15 19:37:53 +01:00
nrf51822_ac_s110.ld	nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).	2016-12-13 20:27:26 +01:00
nrf51822_ac_s120.ld	nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).	2016-12-13 20:27:26 +01:00
nrf51822_ac_s130.ld	nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).	2016-12-13 20:27:26 +01:00
nrf52832_aa.ld	nrf5/boards: Bouncing up heap to 32k on pca10040 to allow for application to allocate 9600bytes+ framebuffer when using LCD screen (240x320).	2016-12-29 08:49:20 +01:00
nrf52832_aa_s1xx.ld	nrf52/boards: Tuning linker script for nrf52832 when using iot softdevice. Need more heap for LCD framebuffer.	2016-12-29 17:08:16 +01:00
nrf52832_aa_s132.ld	nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).	2016-12-13 20:27:26 +01:00
nrf52840_aa.ld	nrf5/boards: Giving a bit more heap for nrf52840 linker script.	2017-01-08 22:34:48 +01:00