circuitpython

microbit

nrf5/boards: Updating s110 SD linker script for micro:bit.

2017-02-02 18:08:28 +01:00

pca10000

nrf5/boards: Updating boards to comply to new style of configuring pins for uart and spi.

2017-01-26 22:29:58 +01:00

pca10001

nrf5/boards: Updating boards to comply to new style of configuring pins for uart and spi.

2017-01-26 22:29:58 +01:00

pca10028

nrf5: Renaming configuration define in board configs using i2c from MICROPY_PY_MACHINE_HW_I2C to MICROPY_PY_MACHINE_I2C as the config is overlapping with the latter.

2017-02-02 18:41:44 +01:00

pca10031

nrf5/boards: Updating boards to comply to new style of configuring pins for uart and spi.

2017-01-26 22:29:58 +01:00

pca10040

nrf5/boards: Updating board makefiles for s132 and s1xx target for pca10040 (nrf52832) by adding sub variant and device define to the makefiles.

2017-02-03 19:28:16 +01:00

pca10056

nrf5: Renaming configuration define in board configs using i2c from MICROPY_PY_MACHINE_HW_I2C to MICROPY_PY_MACHINE_I2C as the config is overlapping with the latter.

2017-02-02 18:41:44 +01:00

common.ld

nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).

2016-12-13 20:27:26 +01:00

make-pins.py

nrf5/boards: Updating make-pins.py to generate ADC pin settings from board pins.csv.

2017-01-11 20:12:32 +01:00

nrf51_prefix.c

nrf5: Updating pin, spi and uart to use port configuration for gpio pins. Update pin generation script, macros for PIN generation. Updating macros for setting pin values adding new port parameter to select the correct GPIO peripheral port.

2017-01-08 16:40:18 +01:00

nrf52_prefix.c

nrf5: Updating pin, spi and uart to use port configuration for gpio pins. Update pin generation script, macros for PIN generation. Updating macros for setting pin values adding new port parameter to select the correct GPIO peripheral port.

2017-01-08 16:40:18 +01:00

nrf51822_aa_s110.ld

nrf5/boards: Releasing more RAM for heap use in the nrf51 s110 linker script.

2017-02-19 19:00:31 +01:00

nrf51822_aa.ld

nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).

2016-12-13 20:27:26 +01:00

nrf51822_ac_s110.ld

nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).

2016-12-13 20:27:26 +01:00

nrf51822_ac_s120.ld

nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).

2016-12-13 20:27:26 +01:00

nrf51822_ac_s130.ld

nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).

2016-12-13 20:27:26 +01:00

nrf51822_ac.ld

nrf51/boards: Increasing heap and stack size in the pca10028 board.

2017-01-15 19:37:53 +01:00

nrf52832_aa_s1xx.ld

nrf52/boards: Tuning linker script for nrf52832 when using iot softdevice. Need more heap for LCD framebuffer.

2016-12-29 17:08:16 +01:00

nrf52832_aa_s132.ld

nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).

2016-12-13 20:27:26 +01:00

nrf52832_aa.ld

nrf5/boards: Bouncing up heap to 32k on pca10040 to allow for application to allocate 9600bytes+ framebuffer when using LCD screen (240x320).

2016-12-29 08:49:20 +01:00

nrf52840_aa.ld

nrf52/boards: Increasing the stack and heap in pca10056 (nrf52840) target from 2k/32k to 40k/128k to debug some buffer problems when running large frozen python programs.

2017-01-15 19:39:57 +01:00