ceeac4791e
atmel-samd: Add Feather M0 with flash
2016-11-18 16:18:13 -08:00
fe9c28538c
atmel-samd: Turn off using the red LED to show mass storage writes.
2016-11-18 16:18:13 -08:00
f42b41e1e9
atmel-samd: Increase autoreset delay to reduce duplicate resets.
2016-10-31 11:31:33 -07:00
5b3a143ffe
atmel-samd: Rework tick timer to use TC5 and support neopixel status LED.
...
The tick timer needed to be reworked because the ASF delay functions also
use the SysTick timer. Now, it uses TC5 and calls out to the autoreset
logic every tick. Fixes #43 .
Added neopixel status colors and corrected the latch time from ms to us.
Fixes #42 .
2016-10-28 20:16:39 -07:00
fc78f6950f
atmel-samd: Add D13 as flash write indicator on Arduino Zero.
2016-10-27 17:49:52 -07:00
3a9cb1ac49
atmel-samd: Fix Arduino SPI pin. Datasheet net name is wrong. :-(
2016-10-26 20:16:53 -07:00
85e4d3572d
atmel-samd: Add named pins for Arduino Zero SPI. Fixes #11 .
2016-10-26 18:02:34 -07:00
2098515f6a
atmel-samd: Rework pin definitions to share most of the data structures and included based on ASF defines.
2016-10-26 17:57:47 -07:00
34fa81eaf3
atmel-samd: Hook in DTR for more ports and make the serial TX more resiliant to long strings.
2016-10-26 13:32:41 -07:00
d189a3f3cf
atmel-samd: Support auto-reset based on USB write activity.
...
It will soft-reboot micropython after a burst of writes to the
file system. This means that after you save files on your computer
they will be automatically rerun.
This can be disabled in the build by unsetting AUTORESET_TIMER in
mpconfigboard.h.
Using the REPL will also prevent the soft resets until you reset
with CTRL-D manually.
2016-10-25 18:36:37 -07:00
614c1fdba2
atmel-samd: Only output to USB after DTR and don't send anything larger than the room left in the USB TX buffer.
2016-10-25 18:29:04 -07:00
d05299f57a
atmel-samd: Add D13 led as mass storage write indicator.
2016-10-25 15:06:05 -07:00
fff96a0ce6
atmel-samd: Fix include guard.
2016-10-25 15:03:22 -07:00
16584dfee6
atmel-samd: Fix the Feather builds by switching to the VFS mass storage implementation.
2016-10-24 12:42:09 -07:00
eb62d03e33
atmel-samd: Add flash write activity LED.
2016-10-21 15:44:09 -07:00
bb1822faea
atmel-samd: Support external flash on the Metro M0 w/Flash.
...
This uses a scratch flash sector to save data before writing a full sector.
2016-10-21 15:44:09 -07:00
aacb1adcd1
atmel-samd: Add linker file for bootloaderless board with external flash.
2016-10-21 15:44:08 -07:00
853e5fc652
atmel-samd: Ensure at least 2k is left for the stack.
2016-10-21 15:43:24 -07:00
306c921ed1
atmel-samd: Rework mass storage interaction with underlying block
...
storage to use micropython's VFS interface.
This makes mass storage work with any VFS implementation rather
than a single one.
2016-10-21 15:36:59 -07:00
9b1170a65d
[atmel-samd] add adalogger board definitions
2016-10-19 10:02:01 +02:00
cb99ae5032
atmel-samd: Rename Feather M0 Bluefruit files to Feather M0 Basic because there isn't anything Bluefruit specific yet.
2016-10-14 13:10:17 -07:00
343ff4faed
atmel-samd: Make the Arduino Zero build use a bootloader.
2016-10-14 13:10:16 -07:00
011056af15
atmel-samd: Add support for SPI.
...
Also separate out the ASF config headers that are shared across all boards.
2016-10-11 15:48:43 -07:00
a6254f4344
atmel-samd: Add basic support for experimental Metro M0 with an external flash chip.
2016-10-07 15:09:01 -07:00
5d6c4109e9
atmel-samd: Change USB Manufacturer from Adafruit to Adafruit Industries.
2016-10-07 15:06:42 -07:00
284d3414e1
atmel-samd: Make UART REPL Arduino Zero specific. Most will use USB REPL.
2016-10-07 15:06:07 -07:00
67372b369e
atmel-samd: Fix A1 and A2 analog inputs.
...
Fixes #3 .
2016-10-07 15:01:26 -07:00
90bf13efd5
atmel-samd: Correct USB PIDs.
...
Arduino and Adafruit convention is for user programs to have PIDs
starting with 8 and bootloaders starting with 0.
2016-10-05 12:55:48 -07:00
7e08347d5c
atmel-samd: Support composite CDC and mass storage USB device.
...
Be careful to not use the flash file system while using mass storage
because both pieces of code attempting to change the fs can corrupt it.
2016-10-05 11:07:29 -07:00
7fd84e93f4
atmel-samd: Support raw repl and soft reset to support ampy.
...
Closes #1 . Also adds TX and RX led support on the Arduino Zero.
2016-09-15 17:01:19 -07:00
7d8929c470
atmel-samd: Add I2C support.
...
This commit also introduces a new shared-bindings directory which is used to store the common Python -> C binding code. By having a shared directory we can ensure that the Python API across ports is the same. Each port will have a corresponding common-hal directory which provides definitions for the C api used in the shared-bindings code. That way the compiler can enforce the C api.
To migrate to this new shared API create a common-hal directory within your port and change the Makefile to compile both the shared-bindings and common-hal files. See atmel-samd/Makefile SRC_BINDINGS for an example.
2016-09-13 11:46:22 -07:00
09be96a6aa
atmel/samd: Add filesystem support. 64k is stored in flash.
2016-09-02 17:00:30 -07:00
1725710feb
atmel-samd: Rename the Feather M0 BLE to Feather M0 Bluefruit LE.
2016-08-31 09:56:06 -07:00
eff137a5f5
atmel/samd: Support CTRL-C on USB. This won't escape native code but it will cause Python code to stop.
2016-08-31 00:11:56 -07:00
ccb309bd5c
atmel/samd: Add basic PWM support which only allows for changing the duty.
2016-08-30 13:10:52 -07:00
b883a15d82
atmel-samd: Rename module classes so they don't conflict with names from ASF.
2016-08-28 00:02:05 -07:00
259ae8a39d
atmel-samd: Initial ADC support.
2016-08-26 17:01:38 -07:00
3cb4938c63
atmel-samd: Support Digital IO pins.
...
Also bumps up the heap size.
2016-08-24 17:38:08 -07:00
0c4f9b878a
Enable REPL over USB.
...
All of the code was there except the linker was failing to clear the bss section because I added too many .zeros. The should have only been the exported globals that start with _ like _szero = .. Fixing that and turn on the usb transmit fixed everything.
2016-08-24 00:14:11 -07:00
386ab580cd
Change the board information used in the header to be board specific.
2016-08-23 17:36:29 -07:00
9485634d41
Add support for REPL on Arduino Zero through EDBG via UART.
2016-08-23 16:47:53 -07:00
8f26d181c3
Blinking the LED works. Clocks should be set up correctly.
...
Everything works fine without USB being plugged in but faults (I think) when USB is plugged in. This is switched away from the USB code from the bootloader onto the USB code thats generated by Atmel Studio using the high level classes from ASF.
2016-08-22 23:53:11 -07:00
Scott Shawcroft
Sebastian Plamauer