djsundog/circuitpython
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
20,161 Commits 21 Branches 274 Tags 785 MiB
7fb751808f
Commit Graph

4887 Commits

Author SHA1 Message Date
Scott Shawcroft
f7a988b9b3
Merge pull request #4405 from DavePutz/issue_4237 
Issue 4237 - Changed initial setting in program_struct
 2021-03-15 17:51:36 -07:00
Scott Shawcroft
9cb8ce67ed
Merge pull request #4412 from kamtom480/spi_and_i2c 
spresense: minor changes for i2c, spi and uart
 2021-03-15 17:35:06 -07:00
Jeff Epler
d3bf1fe15d modifications by pre-commit 2021-03-15 18:11:00 -05:00
Kamil Tomaszewski
ed3f636be5 spresense: empty rx uart fifo after initialization 2021-03-15 16:14:16 +01:00
Kamil Tomaszewski
22ed0abf6c spresens: configure pin mode for i2c and spi 2021-03-15 16:14:16 +01:00
mintakka
0567d06936 added board configuration for Sparkfun ThingPlus RP2040 2021-03-15 10:27:21 -04:00
microDev
a52eb88031
run code formatting script 2021-03-15 19:27:36 +05:30
felixerdy
6c32a1f67f update pins of senseBox MCU 2021-03-15 10:27:50 +01:00
Jeff Epler
b33d77bfe8 disable bitmaptools on over-full board 2021-03-14 20:08:09 -05:00
root
9a83501982 Fixed initial settings for program_struct to allow more than 1 program per pio 2021-03-14 15:05:56 -05:00
Dan Halbert
8e425a9354
Merge pull request #4393 from tannewt/raise_default_flash_speed 
Speed up a bit more
 2021-03-13 12:50:29 -05:00
Scott Shawcroft
1b106de4e0
Merge pull request #4262 from DavePutz/issue_4111 
Issue 4111 - Implement pulseio(pulsein) for RP2040
 2021-03-12 16:48:57 -08:00
Scott Shawcroft
45487f14a0
Speed up a bit more 2021-03-12 16:00:16 -08:00
DavePutz
96ce43e6d6
Added the correct files 2021-03-12 16:18:33 -06:00
DavePutz
6628f49852
Use StateMachine.c interrupt setup and simplify SM program 2021-03-12 16:06:57 -06:00
Jeff Epler
a5c6759325
Merge pull request #4392 from tannewt/lower_default_flash_speed 
Lower default flash speed.
 2021-03-12 13:58:44 -06:00
Scott Shawcroft
aec03a409f
Lower default flash speed. 
/ 6 leads to ~40mhz. 2M and 4M have a max 0x03 read speed of 60mhz.
If the divisor is / 4 then the speed is just over 60mhz.

Fixes #4377
 2021-03-12 11:06:39 -08:00
felixerdy
2009aecac3 Merge branch 'main' of github.com:felixerdy/circuitpython 2021-03-12 17:59:44 +01:00
felixerdy
de93df6444 add senseBox MCU 2021-03-12 17:57:55 +01:00
Dan Halbert
0ce5b2f594 put back pullup setting 2021-03-12 08:20:09 -05:00
gamblor21
307d2a99fe Fix after rebase 2021-03-11 20:06:50 -06:00
gamblor21
5689307798 Changed frequency to match PIO having 2 instructions 2021-03-11 19:32:44 -06:00
gamblor21
b02b1e9979 Set frequency default 60Mhz 2021-03-11 19:32:44 -06:00
gamblor21
1658fe04f9 Set the statemachine to never reset so REPL works 2021-03-11 19:32:44 -06:00
gamblor21
c384ebe5c0 Updated to initalize pindirs 2021-03-11 19:32:44 -06:00
gamblor21
7321411962 Added frequency to parallel display 2021-03-11 19:32:43 -06:00
gamblor21
56a219911f Add frequency support to parallel bus 2021-03-11 19:32:43 -06:00
gamblor21
b080d6207b Removing debug info and clean up 2021-03-11 19:32:43 -06:00
gamblor21
c6aaab6f64 Initial commit 2021-03-11 19:32:43 -06:00
Dan Halbert
c71b6cb699 move to esp-idf PR merge 2021-03-11 20:05:31 -05:00
Dan Halbert
f75a009ed4 fix unnecessary statement order change 2021-03-11 15:16:32 -05:00
Dan Halbert
b5d2cc6f46 Merge remote-tracking branch 'adafruit/main' into esp32s2-i2c-bug 2021-03-11 15:09:18 -05:00
Jeff Epler
24f4d981bd
Merge pull request #4380 from jepler/rp2040-audiomp3 
raspberrypi: Enable mp3 playback
 2021-03-11 12:53:46 -06:00
Scott Shawcroft
0e451a1681
Merge pull request #4383 from hierophect/stm32-uart-dereserve 
STM32: Fix UART deinit
 2021-03-11 10:48:01 -08:00
Scott Shawcroft
40886d198d
Merge pull request #4385 from hierophect/stm32-f407-can 
STM32: add all F405 modules to F407
 2021-03-11 10:45:08 -08:00
Dan Halbert
de88fa37fb Merge remote-tracking branch 'adafruit/main' into esp32s2-i2c-bug 2021-03-11 12:27:29 -05:00
Dan Halbert
061d5910cb use fixed esp-idf 2021-03-11 12:09:01 -05:00
Kamil Tomaszewski
18668f6e28 spresense: fix spi to work with only one data pin 2021-03-11 18:06:49 +01:00
Kamil Tomaszewski
76d0870fba spresense: return error as positive value for i2c 2021-03-11 18:04:01 +01:00
Lucian Copeland
0b73c7a212 Update F407 to match F405 2021-03-11 11:27:17 -05:00
Lucian Copeland
1ebbd14d0f Fix UART deinit 2021-03-11 11:02:13 -05:00
Jeff Epler
15e97f12a1
Merge pull request #4379 from jepler/rp2040-rtc 
raspberrypi: RTC: Ensure a time is set
 2021-03-11 09:00:31 -06:00
Dan Halbert
08c5dbb003 use return values in STM PWMOut constructor, not exceptions 2021-03-11 08:52:47 -05:00
Jeff Epler
16bfe3b41c raspberrypi: RTC: Ensure a time is set 
Until a time is set, the RTC is not running, and rtc_get_datetime()
returns false without assigning to the out-parameter.

In CircuitPython, this would manifest as arbitrary values being returned,
since uninitialized storage on the stack was being converted into a timestamp.
 2021-03-10 20:20:40 -06:00
Scott Shawcroft
f0965b1ef7
Merge pull request #4350 from nitz/board-add-sparkfun-micromod-nrf52840 
Add new nRF port for SF MicroMod nRF52840.
 2021-03-10 18:13:11 -08:00
Jeff Epler
c95def0b32 raspberrypi: Enable mp3 playback 
The rp2040 is _very_ marginal for mp3 playback, and currently sometimes triggers a bug that gives garbled audio output.  However, it does work for some limited situations.
 2021-03-10 18:44:10 -06:00
hathach
58fb011070 clean up 2021-03-10 19:03:27 +07:00
hathach
d1c6bb0927 rp2040 add double reset to uf2, also update pico-sdk to 1.1.0 2021-03-10 18:58:23 +07:00
DavePutz
a3c3e8a0fa
fix trailing whitespace 2021-03-09 22:41:08 -06:00
nitz
d5365cb066
SDIO/QSPI pin names. ¯\_(ツ)_/¯ 2021-03-09 18:36:29 -05:00
nitz
5beb529f61
Update pins, remove unused defs from board config. 2021-03-09 17:43:13 -05:00
nitz
fe0655e121
Update pins, remove unused defs from board config. 2021-03-09 17:39:50 -05:00
DavePutz
0c58cc4772
Moved pin wait to an initial exec 2021-03-09 16:37:29 -06:00
nitz
1ae858126a
Fix the mpconfigboard.mk that was screwy? 2021-03-09 17:29:10 -05:00
Scott Shawcroft
d650849581
Merge pull request #4348 from FBSeletronica/franzininhoWIFI_wrover 
Franzininho wifi ESP32-S2 Wrover
 2021-03-09 13:07:19 -08:00
Scott Shawcroft
2c3002b327
Merge pull request #4370 from jposada202020/i2cperipheral_ctrlc 
I2CPeripheral samd51 corrections in the CTRLC bit
 2021-03-09 12:58:59 -08:00
Chris Dailey
a61db7f12e
Updated SparkFun MicroMod USB PID 
As per the PID provide by TheHoff, [here](https://forum.sparkfun.com/viewtopic.php?p=223812#p223812)
 2021-03-09 12:54:52 -05:00
DavePutz
f0e3274a33
Update to agree with modified StateMachine.h 2021-03-09 11:13:09 -06:00
FBSeletronica
c6eb3f98be Fixing build.yml 2021-03-09 13:55:20 -03:00
jposada202020
be90fa80e8 Initial Changes 2021-03-09 10:48:33 -05:00
DavePutz
6f4510d7aa
Merge branch 'main' into issue_4111 2021-03-08 23:28:21 -06:00
root
576da73a17 Added check for maxlen 2021-03-08 23:23:51 -06:00
root
95b7a59156 Merge branch 'issue_4111' of https://github.com/DavePutz/circuitpython into issue_4111 2021-03-08 23:22:05 -06:00
root
3db0fec267 Added check for maxlen 2021-03-08 23:20:57 -06:00
DavePutz
88650bc4d0
Removed leftover debug code 2021-03-08 22:48:57 -06:00
Dan Halbert
7029783985 funhouse board 2021-03-08 21:24:28 -05:00
Scott Shawcroft
775f1b9e0d
Merge pull request #4329 from jepler/rp2-rotaryio 
raspberrypi: Implement rotaryio, improve StateMachine
 2021-03-08 17:49:45 -08:00
Scott Shawcroft
4fc6c7d8c9
Merge pull request #4347 from FBSeletronica/franzininhoWIFI 
Adding Circuitpython port for Franzininho WIFI board with the ESP32-S2 wroom module
 2021-03-08 15:37:42 -08:00
FBSeletronica
27703f3156 fix quote error 2021-03-08 10:32:37 -03:00
FBSeletronica
fe29780afb updating USB_VID and USB_PID for Espressif modules 2021-03-08 08:51:48 -03:00
FBSeletronica
2771e7fe75 Updating USB vendor ID and producfor Espressif modules 2021-03-08 08:47:33 -03:00
Jeff Epler
cdb0fda72a Merge remote-tracking branch 'origin/main' into count-flash-devices 2021-03-07 20:26:04 -06:00
Dan Halbert
26eb429cc6 restore install/delete for i2c driver 2021-03-07 18:23:14 -05:00
Jeff Epler
f1ada8e880 Automatically count EXTERNAL_FLASH_DEVICES 2021-03-07 11:48:39 -06:00
jerryneedell
a23129bc49 add GD25Q16C flash to BlackPill 2021-03-07 17:23:39 +00:00
Jeff Epler
a4133c4545
Merge pull request #4344 from jepler/vm-size-optimizations 
Vm size optimizations: Get back 1500 bytes for 3.2% VM speed decrease
 2021-03-07 10:09:51 -06:00
nitz
3b76299f39
Add new nRF port for SF MicroMod nRF52840. 2021-03-07 01:06:50 -05:00
FBSeletronica
17aa9ae3f6 Update vendor ID for Espressif ESP32S2 Modules 2021-03-06 18:43:34 -03:00
FBSeletronica
4a50f1dd6f Update Vendor ID for Espressif 2021-03-06 18:36:53 -03:00
FBSeletronica
48e727f7d6 adding port for Franzininho WIFI board ESP32S2 w/Wrover 2021-03-06 17:47:27 -03:00
FBSeletronica
6cf9c5158c adding port for Franzininho WIFI board 2021-03-06 17:15:54 -03:00
Jeff Epler
4f040af481 vm: Make the speed-size trade-off compile time settable 
.. and enable for all samd21 boards
 2021-03-05 18:29:27 -06:00
Jeff Epler
67fb3054b4
Merge pull request #4342 from jamesbowman/main 
Enable EVE low-level for Teensy 4.0 and 4.1
 2021-03-05 17:25:00 -06:00
Jeff Epler
d2056a46ee
Merge pull request #4335 from tyomitch/main 
[nrf] No need to store `buffer_length` as part of `audiopwmio_pwmaudioout_obj_t`
 2021-03-05 15:54:10 -06:00
Jeff Epler
bed96a98d2
Merge pull request #4337 from tyomitch/patch-1 
[stm] `curr_pulseout` can be `STATIC`
 2021-03-05 15:53:31 -06:00
James Bowman
bff585ffd2 Enable EVE low-level for Teensy 4.0 and 4.1 2021-03-05 11:32:58 -08:00
Jeff Epler
cd1f19020f raspberrypi: move landmine Makefile comments 2021-03-05 12:59:55 -06:00
Jeff Epler
2ae1e7de61 WIPrp2040: Implement IncrementalEncoder 
Any two consecutive pins can be used for an IncrementalEncoder

Testing performed: Put a synthesized (few hundred counts per second) quadrature signal into GP2/3 and read the encoder out.  Performed filesystem operations at the same time to stress test it.

The reasons for not using common_hal_rp2pio_statemachine_readinto are commented on.
 2021-03-05 10:31:29 -06:00
Dan Halbert
4cf6579e22 remove general changes; not consistent across builds 2021-03-05 10:10:50 -05:00
Artyom Skrobov
e0b96c0f43 [nrf] No need to store buffer_length as part of audiopwmio_pwmaudioout_obj_t 2021-03-05 06:01:58 -05:00
Artyom Skrobov
4720dc179a
[stm] curr_pulseout can be STATIC 
Not used outside of PulseOut.c
 2021-03-05 12:52:13 +02:00
Dan Halbert
c97721455a Shrink the smallest builds with compile options 2021-03-04 23:07:06 -05:00
DavePutz
a4dda3a5ba
Merge branch 'main' into issue_4111 2021-03-04 14:38:00 -06:00
DavePutz
c5c297d2c0
Update PulseOut.c 2021-03-04 13:53:19 -06:00
DavePutz
b7f03f9487
Update PulseOut.h 2021-03-04 13:52:40 -06:00
DavePutz
2d941b070f
Changed interrupt to per-word basis; cleaned up other small items 2021-03-04 13:51:46 -06:00
Jeff Epler
bc14ed31f6 StateMachine.h: Add header for declaration of mcu_pin_obj_t typedef 2021-03-04 12:28:46 -06:00
Jeff Epler
c023ec03ff PDMIn: Add missing deinit call 2021-03-04 12:28:06 -06:00
Jeff Epler
bd01d31542 rp2pio: Add pins_are_sequential 
This can be used where the standard API calls for a list of pins, to check that they satisfy the requirements of the rp2pio state machine, e.g.,
```python
    def __init__(self, pin_a, pin_b):
        if not rp2pio.pins_are_sequential([pin_a, pin_b]):
            raise ValueError("Pins must be sequential")
```
 2021-03-04 11:26:33 -06:00
Jeff Epler
ff62b0d2c0 StateMachine: Add pull up/down for inputs 2021-03-04 11:26:29 -06:00
Jeff Epler
68ac14b309 StateMachine: Add in_available property 
I named the property `in_available` because it is similar to pyserial.
However, it indicates the number of words in the fifo, not the number
of bytes.
 2021-03-04 11:14:09 -06:00
Dan Halbert
2ae8a44b2a
Merge pull request #4325 from microDev1/fix-wdt 
ESP32S2: Fix watchdog deinit
 2021-03-04 11:04:01 -05:00
hathach
6f99026a64 rp2040 use normal usb_irq_handler() 2021-03-04 21:29:04 +07:00
microDev
13453d35c6
fix watchdog deinit 2021-03-04 13:23:34 +05:30
Dan Halbert
71c43ca2dd
Merge pull request #4319 from jepler/feather-default-uart 
feather rp2040: enable default board.UART
 2021-03-03 16:46:00 -05:00
Jeff Epler
b0fca4fcda feather rp2040: enable default board.UART 2021-03-03 13:13:06 -06:00
Dan Halbert
cd48c5ee83
Merge pull request #4315 from dhalbert/rp2040-i2c-short-writes 
RP2040: Implement short I2C writes (2 bytes or less) using bitbangio
 2021-03-03 12:42:47 -05:00
DavePutz
88353f2f5b
Update mpconfigport.mk 2021-03-03 11:00:58 -06:00
DavePutz
ced707ed32
Update call to rp2pio_statemachine_construct 2021-03-03 10:55:08 -06:00
Scott Shawcroft
514b73bcf8
Merge pull request #4254 from gamblor21/rp2040_countio 
Rp2040 countio
 2021-03-03 08:47:24 -08:00
Scott Shawcroft
1d8933dd05
Merge pull request #4265 from DavePutz/pio_soft_reset 
Clear out PIOs and State Machines on RP2040 soft reset
 2021-03-03 08:43:57 -08:00
Dan Halbert
fb7a0f7efc add 1sec timeouts for I2C read and write 2021-03-03 09:43:57 -05:00
gamblor21
98075c5255 Fixed merge 2021-03-02 22:32:59 -06:00
Dan Halbert
e3ab394cd6 works on nearly all sensors 2021-03-02 23:27:37 -05:00
Dan Halbert
4167778bbc
Merge pull request #4312 from jepler/feather-rp2040-led 
feather rp2040: add board.LED
 2021-03-02 23:19:14 -05:00
DavePutz
9b96bae668
Update mpconfigport.mk 2021-03-02 21:36:00 -06:00
DavePutz
30d491e136
Update mpconfigport.mk 2021-03-02 21:30:49 -06:00
DavePutz
58fb7b9b32
Update mpconfigport.mk to get builds working 2021-03-02 21:27:46 -06:00
DavePutz
6046d37f31
Update PulseIn.c 2021-03-02 21:23:45 -06:00
Mark
37ee18349f
Merge branch 'main' into rp2040_countio 2021-03-02 19:47:53 -06:00
gamblor21
4246cc3f6d Counter and PWMOut slice conflict check 2021-03-02 19:32:06 -06:00
Jeff Epler
b27afad9cb move LED to the right spot in the file 2021-03-02 19:02:38 -06:00
Jeff Epler
efc2667b5f
Merge pull request #4186 from jepler/update-protomatter-rp2 
Enable protomatter on RP2040 builds
 2021-03-02 19:01:37 -06:00
Dan Halbert
15615effc2
Merge pull request #4276 from bergdahl/patch-1 
Update StateMachine.c
 2021-03-02 17:11:45 -05:00
Dan Halbert
0a58d451ad
Merge pull request #4306 from Neradoc/fix-reset-to-safe 
press reset to safe mode on ports where reset reason is not implemented
 2021-03-02 15:44:52 -05:00
Dan Halbert
f31b472309 Merge remote-tracking branch 'adafruit/main' into rp2040-i2c-short-writes 2021-03-02 15:17:12 -05:00
Dan Halbert
9939c59caa wip 2021-03-02 15:16:55 -05:00
Jeff Epler
8bfd308d37 feather rp2040: add board.LED 2021-03-02 13:16:09 -06:00
Scott Shawcroft
e4f0e47d9f
Merge pull request #4233 from pewpew-game/displayio-group-list 
displayio: make Group use a python list internally
 2021-03-02 09:59:58 -08:00
Scott Shawcroft
ce70b95990
Merge pull request #4177 from microDev1/nvm-rp 
RP2040: Support for NVM
 2021-03-02 09:57:36 -08:00
Dan Halbert
248acd07c8 shrink builds 2021-03-02 12:25:42 -05:00
Dan Halbert
f41fb6fafc
Apply suggestions from code review 
copyediting
 2021-03-02 12:01:50 -05:00
Dan Halbert
9f6ebf3012
Merge pull request #4310 from kamtom480/spresense_analogin 
spresense: return valid reference voltage
 2021-03-02 11:55:42 -05:00
Scott Shawcroft
2651e15a52
Merge pull request #4309 from jepler/rp2040-interrupt-pio 
rp2pio: allow keyboard interrupt while waiting for tx fifo to empty (& stall)
 2021-03-02 08:55:27 -08:00
Scott Shawcroft
722a7150ca
Merge pull request #4308 from jepler/rp2040-build-boot2 
raspberrypi: allow directly specifying the original boot .S file
 2021-03-02 08:54:30 -08:00
Jeff Epler
f560b5f3a3 raspberry: switch pico back to the boot2 for W25Q16 
Presumably, switching it to generic hurt performance a bit.

I verified that the build-raspberry_pi_pico/boot2_padded_checksummed.S
built file has the same checksum as the old
bs2_default_padded_checksummed.S
 2021-03-02 08:08:41 -06:00
Kamil Tomaszewski
7c921b808b spresense: Define LONGINT_IMPL as MPZ 2021-03-02 14:25:22 +01:00
Kamil Tomaszewski
f9d21637a3 spresense: return valid reference voltage 2021-03-02 14:25:22 +01:00
Radomir Dopieralski
cb2cf81136 ugame10 - disable pulseio to make more room for the French 2021-03-02 11:11:55 +01:00
microDev
b029031286
minor structural modification 2021-03-02 14:36:28 +05:30
Dan Halbert
54d11a8e2d
Merge pull request #4299 from jamesbowman/main 
Add EVE support for Feather M4 Express
 2021-03-01 22:56:50 -05:00
Jeff Epler
5a00862b1d raspberrypi: allow directly specifying the original boot .S file 
.. all the necessary steps to transform it into a padded, checksummed
file are now done by the build system.

Since it is assigned by "?=", it _should_ be the case that individual
builds can override it.

I did not "test" this per se, but it gives the same content and checksum
(except for the identifying comment with a path) as #4302.
 2021-03-01 21:08:19 -06:00
Jeff Epler
4b63a8c9b4 rp2pio: allow keyboard interrupt while waiting for tx fifo to empty (& stall) 2021-03-01 21:07:04 -06:00
Scott Shawcroft
d0eab5c561
Merge pull request #4256 from kmatch98/bt_cleanup 
Add `bitmaptools` module
 2021-03-01 18:24:12 -08:00
James Bowman
0dabd1ace2 Add EVE support for Feather M4 Express 2021-03-01 14:42:48 -08:00
Scott Shawcroft
1b3bca14cb
Merge pull request #4294 from kamtom480/spresense_analogin 
spresense: return the correct value for Analog In
 2021-03-01 13:21:15 -08:00
Scott Shawcroft
21a8752166
Merge pull request #4297 from adafruit/tannewt-patch-1 
Update flash sizes for Adafruit RP2040 boards
 2021-03-01 13:19:50 -08:00
Jeff Epler
238484ec26 Merge remote-tracking branch 'origin/main' into update-protomatter-rp2 2021-03-01 15:18:32 -06:00
Scott Shawcroft
532e7db293
Merge pull request #4267 from dhalbert/rp2040-digitalinout-fixes 
RP2040: change DigitalInOut direction only when necessary; strong drive strength
 2021-03-01 13:14:13 -08:00
Scott Shawcroft
af9dfccab1
Update QT Py flash size 2021-03-01 10:34:25 -08:00
Scott Shawcroft
dac047db61
Update Feather RP2040 to 8MB 2021-03-01 10:33:04 -08:00
Kamil Tomaszewski
d68fdf3a3d spresense: return the correct value for Analog In 2021-03-01 15:45:10 +01:00
gamblor21
d7bc8a46a5 Added counters per slice 2021-02-27 15:17:27 -06:00
root
29c89a2487 Removed more includes 2021-02-26 22:35:38 -06:00
root
f3515502b7 Removed unecessary includes 2021-02-26 22:33:50 -06:00
root
6374408c06 Changed reset_rp2pio_statemachine to clean up any PIO interrupts. 2021-02-26 22:28:50 -06:00
Jonny Bergdahl
f7eac46c78
Update StateMachine.c 
Changed woring to use max instead
 2021-02-27 00:07:30 +01:00
Scott Shawcroft
776301c932
Typo fix: direcion -> direction 2021-02-26 15:03:56 -08:00
Scott Shawcroft
888a0c5f08
Merge pull request #4224 from microDev1/busio-uart-rp 
RP2040: Support for UART
 2021-02-26 14:57:23 -08:00
Dan Halbert
d9234ffa82 need to gpio_set_dir() at some point 2021-02-26 15:27:35 -05:00
root
7942932176 Requested changes 2021-02-26 14:14:55 -06:00
Scott Shawcroft
7562b0cbb8
Turn off GC opt on catwan_usbstick 2021-02-26 12:00:01 -08:00
Scott Shawcroft
2e6e91dc5c
Merge pull request #4253 from tannewt/rp2040_fix_pwm_reuse 
Fix second shared PWM
 2021-02-26 11:53:54 -08:00
Scott Shawcroft
7c8d7d77dd
Merge remote-tracking branch 'adafruit/main' into busio-uart-rp 2021-02-26 09:04:42 -08:00
Limor "Ladyada" Fried
caedc3bba6
Merge pull request #4270 from tannewt/rp2040_feather_pinout 
Update RP2040 Feather pinout for production rev
 2021-02-26 11:11:44 -05:00
Jeff Epler
1d1ff5f308 Merge remote-tracking branch 'origin/main' into update-protomatter-rp2 2021-02-26 09:56:35 -06:00
Scott Shawcroft
3f08cb47b8
Merge remote-tracking branch 'adafruit/main' into busio-uart-rp 2021-02-25 16:59:15 -08:00
Scott Shawcroft
52bc935fa7
A few minor fixes for corner cases 
* Always clear the peripheral interrupt so we don't hang when full
* Store the ringbuf in the object so it gets collected when we're alive
* Make UART objects have a finaliser so they are deinit when their
  memory is freed
* Copy bytes into the ringbuf from the FIFO after we read to ensure
  the interrupt is enabled ASAP
* Copy bytes into the ringbuf from the FIFO before measuring our
  rx available because the interrupt is based on a threshold (not
  > 0). For example, a single byte won't trigger an interrupt.
 2021-02-25 16:50:57 -08:00
Scott Shawcroft
f0432b9d6f
Remove neopixel power 2021-02-25 16:37:34 -08:00
Kevin Matocha
ec4cd68edc More mpconfigboard.mk corrections for small builds 2021-02-25 17:48:50 -06:00
Dan Halbert
d0f1cfb039 address review; use gpio_set() carefully 2021-02-25 18:41:22 -05:00
Scott Shawcroft
2b163ccd6a
Fix incorrect deinit mask 2021-02-25 14:57:46 -08:00
Scott Shawcroft
1b00d94b23
Fix second shared PWM 
Fixes #4210
 2021-02-25 14:49:09 -08:00
Scott Shawcroft
80f7972f72
Update RP2040 Feather pinout for production rev 2021-02-25 14:46:08 -08:00
Jeff Epler
22276710e6 rp2pio: Fix writing where the stride was 2 or 4 
The wrong stride value was being checked.
 2021-02-25 15:50:49 -06:00
Kevin Matocha
a7a4f93ff8 Updated build configs to turn off BITMAPTOOLS for smaller builds 2021-02-25 15:44:32 -06:00
Dan Halbert
94d7bfb1c9
Merge pull request #4264 from UnexpectedCircuitPython/main 
Expanded pin names for TinyS2 + FeatherS2 pin additions for DAC1 & DAC2
 2021-02-25 15:13:18 -05:00
Dan Halbert
199a8ce8b0 change DigitalInOut direction only when necessary; strong drive strength 2021-02-25 14:10:19 -05:00
root
f8eb5bc275 Cleanup PIOs and State Machines on soft reset 2021-02-25 12:38:43 -06:00
microDev
8170e26a86
more uart improvements 
- address suggested changes
- refine uart instance availibility checks
- improve pin validation and rx buffer handling
 2021-02-25 23:46:00 +05:30
Dan Halbert
bbe0602738
Merge pull request #4245 from kamtom480/spresense_usb_speed 
spresense: Pass the correct USB bus speed after restart
 2021-02-25 11:02:33 -05:00
Kamil Tomaszewski
fb32e0a7fd qtpy_m0_haxpress: Change config to make it fit. 2021-02-25 09:44:33 +01:00
Seon Rozenblum
69b10d7925 Added DAC1 & DAC2 pin names for FeatherS2 
Expanded pin names for TinyS2 and added some new ones for functionality I forgot to add pin names for
Cleaned up mpconfigboard
 2021-02-25 17:32:34 +11:00
root
86e60f5f35 Clean up formatting 2021-02-24 17:26:35 -06:00
root
17ff5dcc99 Return NotImplementedError for PulseOut 2021-02-24 17:04:05 -06:00
root
8e15f36baa pulseio (pulsein) for RP2040 2021-02-24 16:58:29 -06:00
microDev
5d7fdafcde
implement suggested changes 
- add internal buffering
- rtc initialization fix
 2021-02-25 00:48:36 +05:30
Kamil Tomaszewski
e369473794 spresense: change RX and TX buffer size for CDC 2021-02-24 18:19:18 +01:00
Mark
b935dcafdc
Merge branch 'main' into rp2040_countio 2021-02-23 19:46:41 -06:00
gamblor21
379f454ce6 Adding countio to rp2040 2021-02-23 19:38:05 -06:00
Scott Shawcroft
abbbb91fa8
Add state machine divisor check 
This causes an exception when setting a state machine too slow or
too fast.

Fixes #4222
 2021-02-23 16:30:46 -08:00
Scott Shawcroft
360475e266
Implement audiobusio and enhance PIO for it 
This adds I2SOut and PDMIn support via PIO.

StateMachines can now:
 * read and read while writing
 * transfer in 1, 2 or 4 byte increments
 * init pins based on expected defaults automatically
 * be stopped and restarted
 * rxfifo can be cleared and rxstalls detected (good for tracking when
   the reading code isn't keeping up)

Fixes #4162
 2021-02-23 15:50:00 -08:00
Scott Shawcroft
e41137c745
Merge pull request #4244 from UnexpectedCircuitPython/main 
Added Unexpected Maker TinyS2 board definition
 2021-02-23 10:40:06 -08:00
Scott Shawcroft
001d7299b2
Merge pull request #4228 from ZodiusInfuser/rp2040-boards 
Added definitions for Pimoroni RP2040-based boards
 2021-02-23 10:00:19 -08:00
ZodiusInfuser
1a0bf4c33f
Added flash size for PicoSystem 2021-02-23 11:04:20 +00:00
ZodiusInfuser
a9951c9b6c
Added flash size for Keybow2040 2021-02-23 11:01:40 +00:00
ZodiusInfuser
ca9b7debe0
Added flash size for Tiny2040 2021-02-23 10:43:35 +00:00
Seon Rozenblum
78b2daa2a7 Added Unexpected Maker TinyS2 board definition 2021-02-23 17:55:17 +11:00
Dan Halbert
a30d4ad25d set SUPEROPT_VM = 0 on most non-Express SAMD21 boards 2021-02-22 23:03:11 -05:00
Scott Shawcroft
3fdf29e773
More parens 2021-02-22 18:35:09 -08:00