Commit Graph

12361 Commits

Author SHA1 Message Date
Damien George 6e0f9b9262 stm32/boards/pllvalues.py: Support wider range of PLL values for F413.
Signed-off-by: Damien George <damien@micropython.org>
2021-04-20 23:33:33 +10:00
Damien George b74dc546fc tools/metrics.py: Add rp2 port to table of ports that can be built.
Signed-off-by: Damien George <damien@micropython.org>
2021-04-20 21:39:53 +10:00
Damien George 321d1897c3 all: Bump version to 1.15.
Signed-off-by: Damien George <damien@micropython.org>
2021-04-19 00:11:51 +10:00
Damien George 7d911d2069 tests/net_inet: Add 'Strict-Transport-Security' to exp file.
Because micropython.org now adds this to the headers.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-18 23:20:26 +10:00
Tim Radvan f842a40df4 rp2/rp2_pio: Add fifo_join support for PIO.
The PIO state machines on the RP2040 have 4 word deep TX and RX FIFOs.  If
you only need one direction, you can "merge" them into either a single 8
word deep TX or RX FIFO.

We simply add constants to the PIO object, and set the appropriate bits in
`shiftctrl`.

Resolves #6854.

Signed-off-by: Tim Radvan <tim@tjvr.org>
2021-04-17 00:45:38 +10:00
Damien George e5d2ddde25 esp32/machine_pin: Use rtc_gpio_deinit instead of gpio_reset_pin.
Commit 8a917ad252 added the gpio_reset_pin()
call to make sure that pins that were used as ADC inputs could subsequently
be used as digital IO.  But calling gpio_reset_pin() will enable the
pull-up on the pin and so pull it high for a brief period.  Instead use
rtc_gpio_deinit() which will just reconfigure the pin as a digital IO and
do nothing else.

Fixes issue #7079 (see also #5771).

Signed-off-by: Damien George <damien@micropython.org>
2021-04-15 13:06:05 +10:00
Damien George a9bbf7083e tools/ci.sh: Build esp32 using IDF v4.0.2 and v4.3.
To test different IDF's, and also test building the GENERIC_S2 board.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-15 10:31:06 +10:00
Damien George d97b8daf1a esp32/boards: Add GENERIC_S2 board definition.
Signed-off-by: Damien George <damien@micropython.org>
2021-04-15 10:31:06 +10:00
Damien George c81d048bb3 esp32: Add support for USB with CDC ACM.
The REPL will be available on the USB serial port.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-15 10:31:06 +10:00
Damien George 66a86a0615 esp32: Add initial support for ESP32S2 SoCs.
Builds against IDF v4.3-beta2.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-15 10:31:06 +10:00
Damien George 8459f538eb tests/feature_check: Check for lack of pass result rather than failure.
Commit cb68a5741a broke automatic Python
feature detection when running tests, because some detection relied on a
crash of a feature script returning exactly b"CRASH".

This commit fixes this and improves the situation by testing for the lack
of a known pass result, rather than an exact failure result.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-15 00:52:56 +10:00
Damien George 7f366a2190 esp32/modsocket: Correctly handle poll/read of unconnected TCP socket.
For an unconnected TCP socket, poll should return WR|HUP and read should
raise ENOTCONN.  This is implemented by this commit and now the following
tests pass on esp32: extmod/usocket_tcp_basic.py,
net_hosted/connect_poll.py.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-14 15:35:31 +10:00
Damien George d0e014aa41 mimxrt: Enable CPYTHON_COMPAT, PY_ASYNC_AWAIT, PY_ATTRTUPLE options.
This change allows running the tests in tests/basics/ without any failures
(but some tests are still skipped).

Signed-off-by: Damien George <damien@micropython.org>
2021-04-14 12:55:53 +10:00
8bitgeek fc6ea28d00 stm32/sdram: Make MICROPY_HW_FMC_BA1,MICROPY_HW_FMC_A11 optional pins.
This supports SDRAM having only 2 internal banks (using BA0 only), and only
11 (A0-A10) bits of address, such as IS42S16100H (512K x 16bit x 2bank).
2021-04-14 11:06:32 +10:00
Marian Buschsieweke 9c9bfe1968 unix/main: Make static variable that's potentially clobbered by longjmp.
This fixes `error: variable 'subpkg_tried' might be clobbered by 'longjmp'
or 'vfork' [-Werror=clobbered]` when compiling on ppc64le and aarch64 (and
possibly other architectures/toolchains).
2021-04-14 10:45:26 +10:00
Damien George 2ac09c2694 stm32/uart: Use LL_USART_GetBaudRate to compute baudrate.
This function includes the UART prescaler in the calculation (if it has
one, eg on H7 and WB MCUs).

Signed-off-by: Damien George <damien@micropython.org>
2021-04-13 23:59:01 +10:00
Damien George 25c029ce9f stm32/boards: Split UARTx_RTS_DE into UARTx_RTS/UARTx_DE in pin defs.
So these alternate functions can be parsed by the build scripts and used in
application code.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-13 23:58:20 +10:00
matejcik 1a2ffda175 py/runtime: Make sys.modules preallocate to a configurable size.
This allows configuring the pre-allocated size of sys.modules dict, in
order to prevent unwanted reallocations at run-time (3 sys-modules is
really not quite enough for a larger project).
2021-04-12 22:36:16 +10:00
matejcik b26def0644 py/profile: Resolve name collision with STATIC unset.
When building with STATIC undefined (e.g., -DSTATIC=), there are two
instances of mp_type_code that collide at link time: in profile.c and in
builtinevex.c.  This patch resolves the collision by renaming one of them.
2021-04-12 22:31:42 +10:00
Damien George 2668337f36 stm32/rfcore: Intercept addr-resolution HCI cmd to work around BLE bug.
The STM32WB has a problem when address resolution is enabled: under certain
conditions the MCU can get into a state where it draws an additional 10mA
or so and eventually ends up with a broken BLE RX path in the silicon.  A
simple way to reproduce this is to enable address resolution (which is the
default for NimBLE) and start the device advertising.  If there is enough
BLE activity in the vicinity then the device will at some point enter the
bad state and, if left long enough, will have permanent BLE RX damage.

STMicroelectronics are aware of this issue.  The only known workaround at
this stage is to not enable address resolution, which is implemented by
this commit.

Work done in collaboration with Jim Mussared aka @jimmo.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-12 21:51:11 +10:00
Damien George dd62c52a36 stm32/rfcore: Fix race condition with C2 accessing free buffer list.
Prior to this commit, if C2 was busy (eg lots of BLE activity) then it may
not have had time to respond to the notification on the IPCC_CH_MM channel
by the time additional memory was available to put on that buffer.  In such
a case C1 would modify the free buffer list while C2 was potentially
accessing it, and this would eventually lead to lost memory buffers (or a
corrupt linked list).  If all buffers become lost then ACL packets
(asynchronous events) can no longer be delivered from C2 to C1.

This commit fixes this issue by waiting for C2 to indicate that it has
finished using the free buffer list.

Work done in collaboration with Jim Mussared aka @jimmo.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-12 21:43:04 +10:00
jahr 7ca686684e rp2: Add support for building different board configurations.
This change allows to build firmware for different rp2-based boards,
following how it is done in other ports like stm32 and esp32.  So far only
the original Pico and Adafruit Feather RP2040 are added.  Board names
should match (sans case) those in pico-sdk/src/boards/include/boards/.

Usage: Pico firmware can be build either using make as previously (it is
the default board) or by `make BOARD=PICO`.  Feather is built by `make
BOARD=ADAFRUIT_FEATHER_RP2040`.  Only the board name and flash drive size
is set, pin definition is taken from the appropriate pico-sdk board
definition.  Firmware is saved in the directory build-BOARD_NAME.
2021-04-12 21:40:32 +10:00
robert-hh 1be74b94b6 rp2/machine_uart: Add buffered transfer of data with rxbuf/txbuf kwargs.
Instantiation and init now support the rxbuf and txbuf keywords for setting
the buffer size.  The default size is 256 bytes.  The minimum and maximum
sizes are 32 and 32766 respectively.

uart.write() still includes checks for timeout, even if it is very unlikely
to happen due to a) lack of flow control support and b) the minimal timeout
values being longer than the time it needs to send a byte.
2021-04-12 21:31:08 +10:00
robert-hh 22554cf8e2 rp2/rp2_pio: Add StateMachine restart,rx_fifo,tx_fifo helper functions.
StateMachine.restart: Restarts the state machine
StateMachine.rx_fifo: Return the number of RX FIFO items, 0 if empty
StateMachine.tx_fifo: Return the number of TX FIFO items, 0 if empty

restart() seems to be the most useful one, as it resets the state machine
to the initial state without the need to re-initialise/re-create.  It also
makes PIO code easier, because then stalling as an error state can be
unlocked.

rx_fifo() is also useful, for MP code to check for data and timeout if no
data arrived.  Complex logic is easier handled in Python code than in PIO
code.

tx_fifo() can be useful to check states where data is not processed, and is
mostly for symmetry.
2021-04-11 22:41:54 +10:00
robert-hh 6f06dcaee5 rp2/moduos: Implement uos.urandom().
The implementation samples rosc.randombits at a frequency lower than the
oscillator frequency.  This gives better random values.  In addition, for
an 8-bit value 8 samples are taken and fed through a 8-bit CRC,
distributing the sampling over the byte.  The resulting sampling rate is
about 120k/sec.

The RNG does not include testing of error conditions, like the ROSC being
in sync with the sampling or completely failing.  Making the interim value
static causes it to perform a little bit better in short sync or drop-out
situations.

The output of uos.urandom() performs well with the NIST800-22 test suite.
In my trial it passed all tests of the sts 2.1.2 test suite.  I also ran a
test of the random data with the Common Criteria test suite AIS 31, and it
passed all tests too.
2021-04-09 18:24:38 +10:00
Damien George 2c9af1c1d7 rp2/rp2_pio: Validate state machine frequency in constructor.
Fixes issue #7025.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-09 18:06:10 +10:00
Santeri Paavolainen 42035e5ede examples/embedding: Fix example so it compiles again.
There were a few changes that had broken this example, specifically
2cdf1d25f5 removed file.c from ports/unix.
And (at least for MacOS) mp_state_ctx must be placed in the BSS with
-fno-common so it is visible to the linker.

Signed-off-by: Santeri Paavolainen <santtu@iki.fi>
2021-04-09 15:47:54 +10:00
aziubin 7546d3cf73 stm32/boards/NUCLEO_L476RG: Add 5 remaining UARTs.
STM32L476RG MCU of NUCLEO_L476RG board has 6 UART/USART units in total
(USART1, USART2, USART3, UART4, UART5 and LPUART1), but only UART2,
connected to REPL, was defined and available in Python code.
Defined are all 5 remaining UART/USART units including LPUART1.

Signed-off-by: Alexander Ziubin aziubin@googlemail.com
2021-04-09 15:00:55 +10:00
Damien George ab9d47e023 esp32: Enable btree module.
This was disabled with the move to CMake, and this commit reinstates it.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-09 13:33:26 +10:00
Damien George 212fe7f33e extmod/extmod.cmake: Add support to build btree module with CMake.
Signed-off-by: Damien George <damien@micropython.org>
2021-04-09 13:33:26 +10:00
Damien George 5dcc9b3b16 py/py.cmake: Introduce MICROPY_INC_CORE as a list with core includes.
Signed-off-by: Damien George <damien@micropython.org>
2021-04-09 13:08:35 +10:00
Damien George 0fabda31de py/py.cmake: Move qstr helper code to micropy_gather_target_properties.
Signed-off-by: Damien George <damien@micropython.org>
2021-04-09 13:08:35 +10:00
Damien George 7b41d7f187 stm32/boardctrl: Give boards control over execution of boot.py,main.py.
This commit simplifies the customisation of the main MicroPython execution
loop (4 macros are reduced to 2), and allows a board to have full control
over the execution (or not) of boot.py and main.py.

For boards that use the default start-up code, there is no functional
change in this commit.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-09 12:44:19 +10:00
Damien George 4d9e657f0e stm32/mpconfigport.h: Add support for a board to specify root pointers.
A board can now define MICROPY_BOARD_ROOT_POINTERS to specify any custom
root pointers.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-08 17:00:26 +10:00
Damien George cb396827f5 stm32/boards/pllvalues.py: Relax PLLQ constraints on STM32F413 MCUs.
Signed-off-by: Damien George <damien@micropython.org>
2021-04-07 12:47:21 +10:00
Damien George f4340b7e62 stm32/powerctrl: Support using PLLI2C on STM32F413 as USB clock source.
So SYSCLK can run at more varied frequencies, eg 100MHz.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-07 12:47:21 +10:00
Damien George 00963a4e69 stm32/powerctrl: Allow a board to configure AHB and APB clock dividers.
Signed-off-by: Damien George <damien@micropython.org>
2021-04-07 12:47:09 +10:00
stijn a66286f3a0 unix: Improve command line argument processing.
Per CPython everything which comes after the command, module or file
argument is not an option for the interpreter itself.  Hence the processing
of options should stop when encountering those, and the remainder be passed
as sys.argv.  Note the latter was already the case for a module or file but
not for a command.

This fixes issues like 'micropython myfile.py -h' showing the help and
exiting instead of passing '-h' as sys.argv[1], likewise for
'-X <something>' being treated as a special option no matter where it
occurs on the command line.
2021-04-07 12:41:25 +10:00
Tim Radvan 4f53f462ca rp2: Import uarray instead of array in rp2 module.
Some forum users noticed that `sm.exec()` took longer the more was present
on the flash filesystem connected to the RP2040.  They traced this back to
the `array` import inside `asm_pio()`, which is causing MicroPython to scan
the filesystem.

uarray is a built-in module, so importing it shouldn't require scanning the
filesystem.

We avoid moving the import to the top-level in order to keep the namespace
clean; we don't want to accidentally expose `rp2.array`.
2021-04-07 10:06:18 +10:00
Jeff Epler 172fb5230a extmod/re1.5: Check and report byte overflow errors in _compilecode.
The generated regex code is limited in the range of jumps and counts, and
this commit checks all cases which can overflow given the right kind of
input regex, and returns an error in such a case.

This change assumes that the results that overflow an int8_t do not
overflow a platform int.

Closes: #7078

Signed-off-by: Jeff Epler <jepler@gmail.com>
2021-04-06 13:36:42 +10:00
Damien George d35f12f5ca tools/metrics.py: Fix esp32 output filename due to move to CMake.
Signed-off-by: Damien George <damien@micropython.org>
2021-04-06 12:50:19 +10:00
Damien George 25ae169e6e stm32: Include .ARM section in firmware for C++ exception handling.
Support for C++ was added in 97960dc7de but
that commit didn't include the C++ exception handling table in the binary
firmware image.  This commit fixes that.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-06 12:11:15 +10:00
Damien George 2d8aecd2ad rp2/CMakeLists.txt: Enable USB enumeration fix.
This is a workaround for errata RP2040-E5, and is needed to make USB more
reliable on certain USB ports.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-06 11:40:02 +10:00
Damien George f541b3673d docs/develop: Improve user C modules to properly describe how to build.
Make and CMake builds are slightly different and these changes help make it
clear what to do in each case.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-02 17:07:20 +11:00
Damien George d87f42b0e5 examples/usercmodules: Simplify user C module enabling.
It's a bit of a pitfall with user C modules that including them in the
build does not automatically enable them.  This commit changes the docs and
examples for user C modules to encourage writers of user C modules to
enable them unconditionally.  This makes things simpler and covers most use
cases.

See discussion in issue #6960, and also #7086.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-01 16:27:38 +11:00
Michael O'Cleirigh ec79e44502 esp32: Fix multiple definition errors with mp_hal_stdout_tx functions.
It was noticed that the esp32 port didn't build ulab correctly.  The
problem was a multiple defintion of the 'mp_hal_stdout_tx_str' and
'mp_hal_stdout_tx_strn_cooked' functions.

They were defined in stdout_helpers.c but also in the
ports/esp32/mphalport.c.

Fixed by removing stdout_helpers.c from the build.

Signed-off-by: Michael O'Cleirigh <michael.ocleirigh@rivulet.ca>
2021-04-01 15:44:25 +11:00
Michael O'Cleirigh 17b1f82121 tools/ci.sh: Build user C modules for esp32.
Builds the esp32 port against the example C and CXX modules.

Signed-off-by: Michael O'Cleirigh <michael.ocleirigh@rivulet.ca>
2021-04-01 15:44:10 +11:00
Michael O'Cleirigh 0ccd9e08aa esp32: Restore USER_C_MODULE support with new CMake build system.
Support for User C and C++ modules was lost due to upgrading the esp32 to
the latest CMake based IDF from the GNUMakefile build process.

Restore the support for the esp32 port by integrating with the approach
recently added for the rp2 port.

Signed-off-by: Michael O'Cleirigh <michael.ocleirigh@rivulet.ca>
2021-04-01 15:43:15 +11:00
Liam Fraser ca3d51f122 rp2: Don't advertise remote wakeup for USB serial.
This USB feature is currently not supported.  With this flag enabled (and
the feature not implemented) the USB serial will stop working if there is a
delay of more than about 2 seconds between messages, which can occur with
USB autosuspend enabled.

Fixes issue #6866.
2021-03-31 13:50:21 +11:00
Phil Howard 5976ea02a5 tools/ci.sh: Add CI for CMake USER_C_MODULE support.
Builds the rp2 port against the example C and CXX modules.

Signed-off-by: Phil Howard <phil@pimoroni.com>
2021-03-31 00:28:52 +11:00