Dan Halbert
3cf947ff8f
Merge pull request #7399 from CDarius/m5stack_atom_matrix
...
Added M5Stack Atom Matrix board
2023-01-02 13:28:04 -05:00
Dan Halbert
6d9d593a0d
Merge pull request #7401 from CDarius/m5stack_atom_echo
...
Added M5Stack Atom Echo board
2023-01-02 13:27:48 -05:00
Dan Halbert
a061729dcc
Update ports/espressif/boards/m5stack_atom_matrix/sdkconfig
2023-01-02 10:41:25 -05:00
Dan Halbert
f5c0996fb7
Update ports/espressif/boards/m5stack_atom_echo/sdkconfig
2023-01-02 10:41:11 -05:00
Dan Halbert
01f6762aa1
Update ports/espressif/boards/m5stack_atom_u/sdkconfig
2023-01-02 10:40:49 -05:00
CDario
4fe00ef74a
Added M5Stack Atom U
2022-12-31 06:21:49 +00:00
CDario
dec0b272fe
Fixed I2C bus definition
2022-12-30 23:21:46 +00:00
CDario
58e32bd2cb
Fixed speacker and microphone pins definition
2022-12-30 23:09:38 +00:00
CDario
52ee5a9272
Added M5Stack Atom Echo
2022-12-30 20:21:00 +00:00
CDario
42195a4a29
Added M5Stack Atom Matrix board
2022-12-30 17:37:37 +00:00
chukwon
a932fb3fb1
Update pins.c
...
also match lolin_c3_mini pins definition of new version
2022-12-28 21:25:25 +08:00
Dan Halbert
88d0eba7f4
Merge pull request #7258 from m1cha1s/ESP32DevKitV1
...
Esp32 dev kit v1
2022-12-24 09:12:45 -05:00
evildave666
7cfdd24f77
Change flash mode to dio
2022-12-22 09:30:52 +09:00
evildave666
e80ff20583
Remove IO11 from definition
...
It is used internally on this particular board version despite being broken out to a pin and marked on silkscreen.
2022-12-22 09:29:24 +09:00
root
aac324c4d1
added frozen modules, changed to 8BM FLASH
2022-12-18 22:49:28 +00:00
RetiredWizard
68d510cb2f
Update mpconfigboard.h
...
Configure LED pin for STATUS display and to prevent ESP floating pins from constantly lighting led dimly.
2022-12-07 23:00:09 -05:00
Dan Halbert
676e40d62f
Merge pull request #7311 from dhalbert/esp32-box-lite-sdkconfig
...
make esp32-box-lite sdkconfig same as box
2022-12-06 21:31:45 -05:00
Dan Halbert
3965ef9c2a
make esp32-box-lite sdkconfig same as box
2022-12-06 19:27:00 -05:00
evildave666
eaf39b4c10
Update pins.c
2022-12-05 16:40:36 +09:00
evildave666
14b430ed35
Fix pre-commit issues
2022-12-05 16:35:48 +09:00
evildave666
5b6f06d84c
Add additional files
2022-12-05 16:08:12 +09:00
evildave666
05a8bf8c38
Create board.c
2022-12-05 16:06:50 +09:00
m1cha1s
b5dda0b770
Removed esp32_devkit_v1 folder
2022-12-02 14:26:46 +01:00
m1cha1s
d904d8e9a0
Renamed the board folder to doit_esp32_devkit_v1
2022-11-30 20:26:41 +01:00
m1cha1s
680e56c52a
Changed creator id
2022-11-25 14:09:35 +01:00
m1cha1s
26fbb25653
Fixed formatting
2022-11-25 13:55:06 +01:00
m1cha1s
fb46e7c4d8
Defined esp32 board for the esp32 devkit v1
2022-11-25 12:13:44 +01:00
Dan Halbert
85a83b8150
Simplify some ESP32-C3 board sdkconfig files
2022-11-21 12:35:10 -05:00
MicroDev
3a418379d3
Merge branch 'main' of origin into ESP32-S3-DevKitC-1-N32R8
2022-11-18 09:40:20 +05:30
Neradoc
f9f1edbb08
setup PWM status LED on aithinker ESP32-C3 boards
2022-11-17 20:32:50 +01:00
Jeff Epler
12545fb060
Add prototype feather esp32s2/s3 reverse tft board definition
...
This is not final hardware and may change!
2022-11-15 20:22:20 -06:00
root
43566dec5b
allow inclusion of board while blocking build files
2022-11-13 12:13:32 +00:00
root
6c3b9b64da
add crcibernetica-ideaboard
2022-11-12 03:22:15 +00:00
dronecz
11ce074318
Update mpconfigboard.mk
2022-11-08 23:43:13 +01:00
dronecz
a568a5c2e2
Rename sdkonfig to sdkconfig
2022-11-06 22:14:19 +01:00
dronecz
f1e658f8bb
Update sdkonfig
2022-11-06 22:07:12 +01:00
dronecz
882100a87a
Create sdkonfig
2022-11-02 22:10:44 +01:00
dronecz
71b5e6088b
Update mpconfigboard.mk
2022-11-02 22:07:28 +01:00
dronecz
d6fe378456
Update mpconfigboard.h
2022-11-02 22:05:39 +01:00
dronecz
9b1181804c
Merge branch 'adafruit:main' into main
2022-10-30 19:16:05 +01:00
dronecz
468709abcc
Update pins.c
...
Hopefully last change nefore merge.
2022-10-30 18:51:46 +01:00
dronecz
ae8f415bd5
Update board.c
2022-10-30 02:17:38 +02:00
Neradoc
0aa41fa92e
change BOARD_USER_SAFE_MODE_ACTION into a separate sentence
2022-10-30 01:55:42 +02:00
Neradoc
934d2a7004
remove duplicate press boot button, it's already the default
2022-10-30 01:52:17 +02:00
dronecz
5d7c58da5d
Update pins.c
...
Attempt to fix build issue
2022-10-30 01:52:09 +02:00
Dan Halbert
a064b52ad7
CIRCUITPY_ESP32_CAMERA, not CIRCUITPY_USB_CAMERA
2022-10-29 10:13:11 -04:00
Dan Halbert
2ffd16a10c
Update mpconfigboard.mk
2022-10-29 09:27:09 -04:00
CDario
19fd9107a2
Merded with main branch
2022-10-29 07:46:54 +00:00
CDarius
7282bd9c9a
Removed boilerplate already handled by MP_WEAK definitions
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-10-29 09:34:45 +02:00
Dan Halbert
053d0fa8b5
Merge pull request #7145 from chukwon/fix_lolin_s3
...
fix and add lolin_s3 pins definition
2022-10-28 23:50:53 -04:00
chukwon
9c66320474
fix and add lolin_s3 pins definition
2022-10-28 21:40:35 +08:00
CDario
b815a4cc5e
Added safe mode button and fix coyright attribution
2022-10-28 12:06:11 +00:00
CDario
27142d090b
Fixed copyright attribution
2022-10-28 11:08:30 +00:00
CDario
b276ed7af9
Fixed copyright attribution
2022-10-28 05:32:09 +00:00
CDario
b94447fde5
Added safe mode button
2022-10-28 05:00:54 +00:00
Dan Halbert
8fe44a23d2
Merge pull request #7140 from dhalbert/esp32-s3-box-spiram-fix
...
correct SPIRAM settings for ESP32-S3-BOX
2022-10-27 16:09:59 -04:00
Dan Halbert
26688fa826
correct SPIRAM settings for ESP32-S3-BOX
2022-10-27 14:45:29 -04:00
MicroDev
baa44a2dba
Merge pull request #7133 from CDarius/fix_m5stack_core_basic
...
Fixed wrong configuration in sdkconfig
2022-10-27 18:34:07 +05:30
dronecz
d774f3d34f
Update board.c
...
Fix for CLI
2022-10-27 15:02:44 +02:00
dronecz
0e0c106740
Add Maker badge board
2022-10-27 01:06:38 +02:00
CDario
cdbad53649
Fixed wrong configuration in sdkconfig
2022-10-26 20:06:27 +00:00
CDario
be07722bbc
Added board M5Stack Atom Lite
2022-10-26 19:57:23 +00:00
Dan Halbert
5ebdf281cb
Merge pull request #7125 from dhalbert/esp-pin-alarm-fix
...
Fix setup of Espressif PinAlarms
2022-10-26 15:24:58 -04:00
Jeff Epler
366cf4a048
Merge pull request #7113 from CDarius/m5stack_core_fire
...
Added M5Stack Core Fire board
2022-10-26 09:10:50 -05:00
Dan Halbert
e49cd00d60
fix debug UART pins on Metro ESP32-S2
2022-10-25 20:41:08 -04:00
CDario
f6e2369bbd
Removed not available UART in board
2022-10-25 16:53:42 +00:00
CDario
f9983ff556
Added M5Stack Core Basic board
2022-10-25 16:42:14 +00:00
CDario
c8191e8830
Better pins definitions
2022-10-25 11:41:39 +00:00
CDario
5fa67548ea
Added missing sdkconfig file
2022-10-24 20:03:06 +00:00
CDario
39171d7626
Removed unnecessary compiler flags
2022-10-24 19:21:26 +00:00
CDario
beab76c325
Added M5Stack Core Fire board
2022-10-24 18:38:30 +00:00
Neradoc
3c5bf4e852
Update ports/espressif/boards/m5stack_stamp_c3/mpconfigboard.mk
...
Co-authored-by: MicroDev <70126934+MicroDev1@users.noreply.github.com>
2022-10-22 16:23:27 +02:00
askpatrickw
d147712522
Add M5 Stamp C3 board
2022-10-22 00:45:54 +02:00
microDev
5114ae7a31
fix 2MB-no-uf2 partition table
2022-10-17 19:44:08 +05:30
Kong Wai Weng
fc00a6675e
Added some pin definitions to match with the Arduino core.
2022-10-14 17:25:24 +08:00
Dan Halbert
822e806f03
Merge pull request #7031 from BPI-STEAM/CircuitPython-main-bpi-picow-dev
...
Add BananaPi BPI-PicoW-S3 .
2022-10-11 22:53:37 -04:00
Wind-stormger
376df8ec7e
Add BananaPi BPI-PicoW-S3 .
...
Adds support for the BananaPi BPI-PicoW-S3 Boards.
Based on esp32s3 chip.
With one WS2812 LED, one monochrome LED, one ceramic antenna.
Support double-reset to tinyUF2.
2022-10-12 09:11:25 +08:00
microDev
4f753251db
cleanup mpconfigboard.mk of espressif boards
...
- move `INTERNAL_FLASH_FILESYSTEM` to `mpconfigport.mk`
- move `LONGINT_IMPL` to `mpconfigport.mk`
- move `CFG_TUD_TASK_QUEUE_SZ` to `Makefile`
2022-10-06 16:15:01 +05:30
Dan Halbert
296960dd89
shorten board.c
2022-10-05 20:23:19 -04:00
Neradoc
d31acdef6c
we don't use AUTORESET_DELAY_MS
2022-10-06 02:19:48 +02:00
Kyle Mohr
dd5f9411c8
Merge branch 'adafruit:main' into main
2022-10-05 13:44:12 -05:00
Kyle Mohr
02e115cbc2
Update mpconfigboard.mk
2022-10-04 00:03:59 -05:00
Kyle Mohr
330b96726a
add newlines to end of files
2022-10-04 04:56:31 +00:00
Kyle Mohr
5268ef01c9
Utilize VID/PID from native USB port
2022-10-03 23:45:28 -05:00
Kyle Mohr
cffc1bfcab
sdkconfig didn't get committed for some reason...
2022-10-03 22:54:31 -05:00
Kyle Mohr
a948dc399b
add esp32-s2-devkitc-1-n8r2 variant
2022-10-04 03:51:51 +00:00
Dan Halbert
90f6096955
fix ai-thinker creation ids; fix some typos elsewhere
2022-10-03 15:29:03 -04:00
Dan Halbert
9d1b12066d
Espressif: do not hold pins during deep sleep if not necessary
2022-09-29 20:11:48 -04:00
Jeff Epler
a769beed3f
Use new unique ID for this board
2022-09-22 16:23:38 -05:00
Jeff Epler
1091d51af2
Merge pull request #6918 from UnexpectedCircuitPython/main
...
Added support for Unexpected Maker TinyPICO (V2/V3) and TinyPICO Nano
2022-09-17 21:39:17 -04:00
Seon Rozenblum
268b3f0dde
Added support for Unexpected Maker TinyPICO (V2/V3) and TinyPICO Nano boards using ESP32-PICO-D4
2022-09-18 09:49:30 +10:00
Paul Price
b2ffda219a
updated a pin definition
2022-09-17 16:53:24 -04:00
MicroDev
4a69dfa50c
Merge pull request #6907 from dhalbert/preserve-pins-on-deep-sleep
...
allow preserving pin state during deep sleep
2022-09-16 17:52:04 +05:30
Dan Halbert
4df8a51982
Remove unneeded workaround for Feather ESP32-S2 TFT
2022-09-15 20:06:47 -04:00
Dan Halbert
60f43b1703
allow preserving pin state during deep sleep
2022-09-15 17:35:14 -04:00
Wind-stormger
56c5f1eedf
Add BananaPi BPI-Leaf-S3.
...
Based on esp32s3, all available pins are drawn.
2M PSRAM, 8M FLASH.
A JST SH 4-pin Connector can be used for STEMMA QT / Qwiic.
A MX 1.25mm 2-Pin Connector Lithium battery power supply.
A WS2812 LED.
2022-09-15 14:18:24 +08:00
Dan Halbert
14fc4a0797
Merge pull request #6898 from dhalbert/espressif-pwmout-reset
...
Espressif pwmout reset fixes
2022-09-14 18:47:05 -04:00
Dan Halbert
ae64f9fd78
Merge pull request #6899 from BPI-STEAM/CircuitPython-main-BPI-BIT-S2-PR
...
Add BananaPi BPI-Bit-S2 .
2022-09-13 23:02:46 -04:00
Wind-stormger
6f4cc611ed
Add BananaPi BPI-Bit-S2 .
...
Adds support for the BananaPi BPI-Bit-S2 Boards.
Based on esp32s2 chip.
With 25 ws2812 LEDs, 1 buzzer, 2 photosensitive sensors, 1 thermosensitive sensor,
2 buttons on the front, 1 reset button and 1 boot button on the back.
2022-09-14 10:21:23 +08:00
Dan Halbert
14adfb16dd
avoid pwmout_reset() workaround by reordering in main(); remove unnecessary never-resets
2022-09-12 21:32:21 -04:00
Dan Halbert
d0d10179c2
fix logic in pwmout_reset()
2022-09-12 17:03:45 -04:00
Kong Wai Weng
c157f1cb39
Cast pin_number to int8_t so that it can be used with switch-case.
2022-09-12 18:56:15 +08:00
Kong Wai Weng
0ae015e4d9
Removed whitespaces.
2022-09-12 18:25:27 +08:00
Kong Wai Weng
aaa2be1200
Set the default pin state for GPIOs to pull down.
2022-09-12 18:19:33 +08:00
microDev
36221bd749
update board microdev_micro_c3
2022-09-11 13:31:38 +05:30
Kong Wai Weng
2fbb3090e2
Changed the pins assignment.
2022-09-09 16:50:14 +08:00
Dan Halbert
58b00467c4
Merge pull request #6878 from dhalbert/weak-board-defs
...
Use MP_WEAK for default board.c routines
2022-09-08 10:47:08 -04:00
Dan Halbert
4cb69a51d5
Use MP_WEAK for default board.c routines
2022-09-08 07:36:50 -04:00
Seon Rozenblum
6c4f352533
Fixed incorrect IO naming for ProS3 and FeatherS3
2022-09-07 19:51:45 +10:00
Dan Halbert
14498f793d
Merge pull request #6859 from wemos/s3_cpython
...
Add LOLIN S3 ESP32-S3 board.
2022-09-04 13:10:52 -04:00
bill88t
ca7fb6dede
removal of sda-scl and add "GP" to 40,41
2022-09-04 18:05:50 +03:00
bill88t
e1891038c8
Forgor the one IO pin and sda-scl
2022-09-04 16:59:56 +03:00
wemos
3a18d285a2
Add LOLIN S3 ESP32-S3 board.
2022-09-03 11:06:51 +08:00
Jeff Epler
8ed6a6135a
Disable camera on boards without psram
2022-08-26 09:27:50 -05:00
Martin
528da05f54
Add Waveshare ESP32-S2-Pico-LCD
2022-08-15 16:46:14 +02:00
lady ada
2f2ccdddbf
pycam rev b pins
2022-08-13 23:41:35 -04:00
Scott Shawcroft
df1435ae94
Audit all boards with LED pins defined
...
Add them as MICROPY_HW_LED_STATUS so that we can share reset code
for them. They aren't actually used for the status if another RGB
option is available. (But maybe they should be.)
Fixes #6717
2022-08-11 14:41:20 -07:00
Dan Halbert
198c8fea11
merge from upstream and fix espressif_esp32s3_eye
2022-08-10 08:43:08 -04:00
Dan Halbert
02cc6c2aee
Merge remote-tracking branch 'adafruit/main' into remove-autobrightness
2022-08-10 08:35:53 -04:00
Dan Halbert
41bcd7b260
Remove support for auto-brightness
2022-08-09 22:40:21 -04:00
Scott Shawcroft
59b4353282
Merge pull request #6713 from tannewt/exception_filename
...
Add exception filename to title bar
2022-08-09 16:59:12 -07:00
Scott Shawcroft
554063a817
Merge branch 'main' into espressif-camera-2
2022-08-09 14:07:14 -07:00
Scott Shawcroft
5084de1b73
Merge pull request #6708 from strid3r21/main
...
Added Smart Bee Design Boards
2022-08-09 14:06:11 -07:00
Scott Shawcroft
b3b27a1d80
Remove extra leading spaces
2022-08-09 10:45:47 -07:00
Scott Shawcroft
556d01a685
Remove extra newline at end of file
2022-08-09 10:44:57 -07:00
Scott Shawcroft
ce1273be7a
Pull Feather S2 TFT LED down on reset
2022-08-09 10:42:56 -07:00
Jeff Epler
ec839d6f90
these items should not have been disabled
2022-08-09 11:42:19 -05:00
Jeff Epler
f87e34b9ed
add shutter button
2022-08-09 11:42:19 -05:00
Dan Halbert
10275001ac
enable web workflow on Feather HUZZAH32
2022-08-09 07:26:18 -04:00
paul
15ad24ba62
ran pre-commit.
2022-08-09 04:32:21 -04:00
lady ada
2cd9222e5e
add includes
2022-08-07 14:32:29 -04:00
lady ada
029b6b6fbe
add default display
2022-08-07 14:12:40 -04:00
paul
a6eadd6259
Added Bee Motion S3 board
2022-08-07 11:59:43 -04:00
paul
f39058edc4
Added Bee S3 board
2022-08-06 22:22:20 -04:00
Jeff Epler
1da8065d6b
Merge remote-tracking branch 'origin/main' into espressif-camera-2
2022-08-05 16:38:51 -05:00
Jeff Epler
3f49d77036
Improve esp32-s3-eye board definition
2022-08-05 13:10:21 -05:00
Scott Shawcroft
125b276af0
Get CIRCUITPY FATFS directly.
...
Otherwise, you may actually get a non-root filesystem.
Fixes #6575
2022-08-04 16:06:27 -07:00
Jeff Epler
861fa9625d
Add the ESP32-EYE aka ESP-EYE
2022-08-04 15:12:12 -05:00
Jeff Epler
0e26a937cc
Disable camera everywhere it doesn't fit
2022-08-04 15:12:08 -05:00
Jeff Epler
69949ecb43
update PID for this board
2022-08-04 15:11:56 -05:00
Jeff Epler
b903a020fd
Enable display on esp32-s3-eye
2022-08-04 15:11:52 -05:00
Jeff Epler
8d673bdbf5
reserve 1MB of PSRAM for camera framebuffer on esp32s3-eye
...
.. this setting can be overridden with a bigger or smaller value in
CIRCUITPY/.env but 1/8 of PSRAM seems like a good initial value. It's
enough to store a single 800x600 or 640x480 RGB565 frame, or multiple
smaller frames such as 320x240.
2022-08-04 15:11:51 -05:00
Jeff Epler
5db6db0128
add esp32-camera
...
This uses the esp32-camera code instead of our own homebrewed camera code.
In theory it supports esp32, esp32-s2 and esp32-s3, as long as they have
PSRAM.
This is very basic and doesn't support changing any camera parameters,
including switching resolution or pixelformat.
This is tested on the Kaluga (ESP32-S2) and ESP32-S3-Eye boards.
First, reserve some PSRAM by putting this line in `CIRCUITPY/_env`:
```
CIRCUITPY_RESERVED_PSRAM=524288
```
and hard-reset the board for it to take effect.
Now, the following script will take a very low-resolution jpeg file and print
it in the REPL in escape coded form:
```python
import board
import esp32_camera
c = esp32_camera.Camera(
data_pins=board.CAMERA_DATA,
external_clock_pin=board.CAMERA_XCLK,
pixel_clock_pin=board.CAMERA_PCLK,
vsync_pin=board.CAMERA_VSYNC,
href_pin=board.CAMERA_HREF,
pixel_format=esp32_camera.PixelFormat.JPEG,
i2c=board.I2C(),
external_clock_frequency=20_000_000)
m = c.take()
if m is not None:
print(bytes(m))
```
Then on desktop open a python repl and run something like
```python
>>> with open("my.jpg", "wb") as f: f.write(<BIG PASTE FROM REPL>)
```
and open my.jpg in a viewer.
2022-08-04 15:11:50 -05:00
Jeff Epler
8e08cc38f8
Add default I2C bus to Kaluga
2022-08-04 15:11:48 -05:00
Scott Shawcroft
e0cb8ef17e
Merge pull request #6694 from dhalbert/esp32-no-psram
...
ESP32 no psram support; other ESP32 cleanup
2022-08-04 11:49:39 -07:00
Scott Shawcroft
3707b54e3b
Merge pull request #6672 from bill88t/main
...
Add Waveshare ESP32-S2-Pico
2022-08-04 11:09:59 -07:00
Dan Halbert
202fac59f8
ESP32 fixes for no PSRAM; some cleanup
2022-08-04 13:44:52 -04:00
Dan Halbert
d4e8c19b49
merge from main
2022-08-04 12:43:23 -04:00
bill88t
68bb6b9988
ran precommit
2022-08-03 09:14:26 +03:00
Bill Sideris
efa3e40f90
Add the one obtained from esp
2022-08-03 08:48:28 +03:00
Dan Halbert
534a482d94
initial HUZZAH32 bring-up, with hacked pins
2022-08-02 21:47:46 -04:00
Scott Shawcroft
74e841d835
Read fuses to know what flash and ram pins to never reset
2022-08-02 12:01:42 -07:00
Bill Sideris
60429f51c7
Add official vid/pid
2022-08-02 09:43:17 +03:00
Scott Shawcroft
f0c6a8c49a
Odroid pin defs
2022-08-01 15:52:08 -07:00
Scott Shawcroft
9661d3256c
Add more ESP32 boards and enable web workflow
2022-08-01 15:52:08 -07:00
bill88t
c71cc4e0dd
Add Waveshare ESP32-S2-Pico
2022-07-30 15:35:48 +03:00
Scott Shawcroft
d6344812e8
Lots of web workflow, C3 and title bar fixes
...
* Fixes #6221 - C3 hang on `import wifi`. Enabling the WiFi PHY was
disabling USB. Now boards that use it set CONFIG_ESP_PHY_ENABLE_USB
explicitly.
* Fixes #6655 - Allows pasting into the web serial page. Fixes reading
more than 0xf bytes at a time.
* Fixes #6653 - Fixes web socket encoding of payloads >125 bytes. Can
happen when printing a long string.
* Fixes C3 responsiveness when waiting for key to enter REPL. (It
now correctly stops sleeping.)
* Disables title bar updates when in raw REPL. Related to #6548 .
* Adds version to title bar.
2022-07-28 16:06:56 -07:00
Dan Halbert
3817d007aa
clean up esp32 sdkconfigs
2022-07-28 17:52:27 -04:00
Scott Shawcroft
c29fa9012d
Merge pull request #6645 from prplz/seeed_xiao_esp32c3
...
Add board: seeed_xiao_esp32c3
2022-07-28 11:22:43 -07:00
Scott Shawcroft
ddeb833a3a
Shrink Feather S3 4mb build with -Os
2022-07-28 07:43:39 -07:00
Michael Himing
555bf7cc12
Add board: seeed_xiao_esp32c3
2022-07-28 22:48:03 +10:00
Chris Dailey
2a9d3c5ed2
Adds BOOT0 (GPIO 0) as a named pin for MagTag.
2022-07-27 08:38:52 -04:00
Scott Shawcroft
47f718aa92
Merge pull request #6615 from askpatrickw/beetle-esp32-c3
...
Beetle esp32 c3
2022-07-25 15:00:05 -07:00
Dan Halbert
e877644012
use -Os on Feather ESP32-S3 TFT to shrink build
2022-07-19 17:45:29 -04:00
Patrick
1e99d68af7
Add Creator ID
2022-07-17 12:38:27 -07:00
Patrick
71c22232f0
board config compelted
2022-07-17 11:48:45 -07:00
Scott Shawcroft
c2a8ef752c
Remove ps2io to make space
2022-07-15 14:01:50 -07:00
Scott Shawcroft
ac460dd1e1
Merge branch 'main' into esp32
2022-07-13 15:30:53 -07:00
Melissa LeBlanc-Williams
08b4a64bd2
Update the PID
2022-07-11 08:39:10 -07:00
Melissa LeBlanc-Williams
bc14b7ad47
Fix the display on the esp box lite
2022-07-08 15:40:59 -07:00
Dan Halbert
c316b950c7
merge from adafruit/main
2022-07-08 15:42:19 -04:00
Dan Halbert
d869b441f4
further ESP32 sdkconfig fixes; add CIRCUITPY_STATUS_BAR
2022-07-08 15:27:00 -04:00
Dan Halbert
76e32dcf93
remove need for CIRCUITPY_ESP_PSRAM
2022-07-08 14:54:55 -04:00
Dan Halbert
afbf4de071
Uncomment or remove debugging changes
2022-07-08 12:53:25 -04:00
Dan Halbert
c3cd32e773
CPU freq to 240 MHz, redo sdkconfigs
2022-07-08 10:50:00 -04:00
Dan Halbert
75208573f4
tweak sdkconfig; add temp logging to mp_make_function_from_raw_code
2022-07-08 09:53:29 -04:00
Dan Halbert
4e88d795e1
Thonny causing crash emitglue.c:199:
2022-07-06 23:01:19 -04:00
Scott Shawcroft
d83720f659
Tweak display init
2022-07-05 17:02:52 -07:00
Scott Shawcroft
cd77517b2f
Add build for ESP32-S3 Box Lite
2022-07-05 16:35:42 -07:00
Patrick
c3cf9ba9ce
remove wifi max from sdkconfig
2022-07-01 14:50:47 -07:00
Patrick
aaeda97818
update PHY section, correct name
2022-07-01 14:50:47 -07:00
Patrick
aa53d36934
setting CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER to 8.5
2022-07-01 14:50:47 -07:00
Patrick
7e367eeb58
Update "D" mappings
2022-07-01 14:50:47 -07:00
Patrick
d4b26daf1b
correct creator and creation IDs
2022-07-01 14:50:47 -07:00
Patrick
6c7faf0eba
Change USB VID & PID to Creator and Creation IDs
2022-07-01 14:50:47 -07:00
Patrick
3253ae2503
tested and corrected several pins
2022-07-01 14:50:47 -07:00
Patrick
f10fa566aa
REPL works. Based on QTPYC3.
2022-07-01 14:50:47 -07:00
Patrick
a3070f6c2a
Changes to Pin Mappings
2022-07-01 14:50:46 -07:00
Patrick
b37236f83f
C3 does not have PSRAM
2022-07-01 14:50:46 -07:00
Patrick
af629ab180
Add assumed PID value
2022-07-01 14:50:46 -07:00
Patrick
c1e6003d26
remove comment that breaks {ID Checker
2022-07-01 14:50:46 -07:00
Patrick
9bae8549c5
add UART RX TX to mpconfigboard
2022-07-01 14:50:46 -07:00
Patrick
6763b7b968
add A5
2022-07-01 14:50:46 -07:00
Patrick
bcf27e146b
fix build break and add io 20/21
2022-07-01 14:50:46 -07:00
Patrick
dc1c86738a
Initial pin mapping pass
2022-07-01 14:50:46 -07:00
Patrick
fd4695d0f2
Gettting started with pin mapping.
2022-07-01 14:50:46 -07:00
Dan Halbert
8bb369cac5
refactor debug UART to console UART; get working on ESP32
2022-06-30 23:16:46 -04:00
Dan Halbert
b0efd130c9
ESP32 REPL working through debug UART
2022-06-29 23:19:36 -04:00
Dan Halbert
780c4963cb
wip; change never-ever reset pin mechanism
2022-06-28 23:06:49 -04:00
Dan Halbert
ca64950503
wip fixes
2022-06-28 18:32:08 -04:00
