Commit Graph

906 Commits

Author SHA1 Message Date
Damien George 96c6b8cae3 ports: Rename USBD_VID/PID config macros to MICROPY_HW_USB_VID/PID.
For consistency with other board-level config macros that begin with
MICROPY_HW_USB.

Also allow boards in the mimxrt, nrf and samd ports to configure these
values.

Signed-off-by: Damien George <damien@micropython.org>
2021-08-07 23:13:55 +10:00
Scott Shawcroft 1e225610cc
Add ability to disable BLE workflow
Call `supervisor.disable_ble_workflow()` and the BLE workflow will
be disabled until the chip is reset.

This also includes a couple fixes:
1. Terminals can now be deinit by setting the tilegrid to NULL. This
  prevents using the tilegrid before display is init.
2. Fix BLE serial send amount when sending more than a single packet.

Fixes #5049
2021-08-02 18:37:19 -07:00
robert-hh 4445c73b11 tools/autobuild: Add the MIMXRT1050_EVKB board to the daily builds. 2021-07-31 16:27:47 +10:00
Tobias Thyrrestrup 60e3e51753 stm32/Makefile: Update to only pull in used Bluetooth library. 2021-07-31 15:11:46 +10:00
Ryan A. Pavlik c54b86dd0c
Update ter-u12n.bdf
Remove duplicate ENDCHAR that made it invalid
2021-07-30 10:41:38 -05:00
Jeff Epler 5e07b7959f check vid/pid: find topdir relative to this script
@dhalbert noticed that if a fork was called `micropython`, the
existing check could fail during CI because it will be cloned into a
directory also called `micropython`.

Instead of hardcoding a range of strings that are OK as top directories,
find the location of the top directory relative to the script.

This will be conflicty after #5069 is merged, but it should be easy to
fix.
2021-07-27 15:20:58 -05:00
Dan Halbert a974a2d3c1 allow micropython as top-level dir name in duplicate pid/vid check 2021-07-27 09:04:44 -04:00
Michel Bouwmans 92464f11b0 tools/mpremote: Raise OSError on unsupported RemoteFile.seek.
Signed-off-by: Michel Bouwmans <m.bouwmans@ep-games.eu>
2021-07-23 13:21:53 +10:00
Michel Bouwmans 7870ec0370 tools/mpremote: Add seek whence for mounted files.
Fixes issue #7534.

Signed-off-by: Michel Bouwmans <m.bouwmans@ep-games.eu>
2021-07-23 13:21:42 +10:00
Seon Rozenblum 25159129dd tools/autobuild: Add FeatherS2 and TinyS2 to esp32 auto builds. 2021-07-22 22:42:37 +10:00
Damien George 0256e1ab8b tools/autobuild: Use separate IDF version to build newer esp32 SoCs.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-22 22:42:37 +10:00
Jeff Epler 755caddc89 extract_py: Import Dict if needed 2021-07-20 19:49:25 -05:00
Damien George 9f71a11d3f tools/ci.sh: Build GENERIC_C3 board as part of esp32 CI.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-18 23:58:24 +10:00
Damien George cbc8d5b61f tools/ci.sh: Build unix dev variant as part of macOS CI.
To test BTstack build on macOS.

Signed-off-by: Damien George <damien@micropython.org>
2021-07-17 23:55:25 +10:00
Scott Shawcroft c16f559574
Merge pull request #4907 from jepler/refine-stubs
refine stubs-building procedure
2021-07-15 12:11:58 -07:00
Scott Shawcroft 0fadf028ef
Create first BLE-only board, Micro:Bit v2
This fixes build issues with USB off, tweaks the README to allow
for BLE-only boards and adds the Micro:Bit v2 definition.

Fixes #4546
2021-07-14 09:55:51 -07:00
Damien George 0ee256b8b1 github/workflows: Add workflow to build and test unix dev variant.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-13 15:58:39 +10:00
Damien George 136369d72f all: Update to point to files in new shared/ directory.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-12 17:08:10 +10:00
Jeff Epler fd4a7fce91 add tool to parse out firmware sizes for comparison 2021-07-10 19:11:47 -05:00
Jeff Epler 3191357807 Merge remote-tracking branch 'origin/main' into refine-stubs 2021-07-08 19:05:26 -05:00
Andrew Scheller d1decdfa93 tools/mpremote: Swap order of PID and VID in connect-list output.
Fixes issue #7481.
2021-07-02 23:27:07 +10:00
Frank Pilhofer 41adf17830 tools/pyboard.py: Add cmd-line option to make soft reset configurable.
Leaves the default as-is, but allows using --no-soft-reset to disable the
soft reset when connecting.
2021-07-01 12:37:08 +10:00
robert-hh efa97beb99 tools/autobuild: Add mimxrt port to build scripts for nightly builds.
The firmware for Teensy 4.0, Teensy 4.1 and MIMXRT1020_EVK are created.
Users of other MIMXRT10xx_EVK boards should be able to build the firmware
themselves, they might need specific DEBUG settings.

The Makefile had to be changed in order to build the .bin file as well.
2021-07-01 12:29:16 +10:00
Yonatan Goldschmidt 4ada56d4cb tools/makemanifest.py: Allow passing flags to mpy-tool.py. 2021-06-28 01:50:00 +03:00
Damien George f3e4ed82a1 github/workflows: Switch from lcov to gcov.
Coverage calculated by Codecov has the same reliability/deterministic
issues as Coveralls did, so the problem is likely to do with the output of
lcov/gcov, rather than the analysis and display of the data.

Switch from lcov to gcov for data generation to try and simplify this
process of computing coverage.

Signed-off-by: Damien George <damien@micropython.org>
2021-06-26 21:34:37 +10:00
Damien George 2dc4f843bc github/workflows: Add workflow to build and test javascript port.
Signed-off-by: Damien George <damien@micropython.org>
2021-06-25 11:31:00 +10:00
David Lechner 8cebd56a11 tools/ci.sh: Run apt-get update in ci_powerpc_setup.
This fixes failing builds when the GitHub CI image lags behind Ubuntu
security updates.
2021-06-25 10:34:45 +10:00
Damien George c99e4995fd tools: Remove obsolete build-stm-latest.sh script.
The tools/autobuild/ scripts replace this.

Signed-off-by: Damien George <damien@micropython.org>
2021-06-23 16:59:20 +10:00
Damien George 3588d14ae6 tools/autobuild: Add scripts to build release firmware.
Signed-off-by: Damien George <damien@micropython.org>
2021-06-23 16:59:20 +10:00
Jeff Epler f51ca53553 refine stubs-building procedure
* so that excess files are not included in sdist, perform build down
   in circuitpython-stubs
 * This means we need to
   * Remove the need-pypi check
   * Copy a setup.py, README, and MANIFEST.in into the stubs build location
   * Revamp how the overall `mypy --strict` check lists its inputs
 * Add a new test that actually installing the stubs lets us do type
   checking (tools/test-stubs.sh)
 * Add a missing return type to a __init__ function (why was this not
   an error under `mypy --strict`, I wonder)
2021-06-22 08:59:05 -05:00
Jeff Epler b1785eb3f1 finish copyright-notice suggestion 2021-06-21 19:52:08 -05:00
Jeff Epler 680ac9388f review suggestion: remove files 2021-06-21 19:51:03 -05:00
Jeff Epler 4401d73efd
Update tools/pyboard.py
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-06-21 19:49:56 -05:00
Jeff Epler 87d3740c64 Merge tag 'v1.16' 2021-06-18 10:54:19 -05:00
Damien George d2dcd05adc tools/mpremote: Use signal to capture and handle ctrl-C on Windows.
Now a ctrl-C will not stop mpremote, rather this character will be passed
through to the attached device.

The mpremote version is also increased to 0.0.5.

Signed-off-by: Damien George <damien@micropython.org>
2021-06-15 13:52:31 +10:00
Damien George 77c529e8be tools/mpremote: Use available ports instead of auto-connect list.
Using just the list of available ports, instead of a hard-coded list of
possible ports, means that all ports will be available for auto connection.
And the order that they will be attempted in will match what's printed by
"mpremote connect list" (and will be the same as before, trying ACMx before
USBx).  Auto-connect will also now work on Mac, and will allow all COM
ports on Windows.

Signed-off-by: Damien George <damien@micropython.org>
2021-06-15 13:52:31 +10:00
Jeff Epler 124c7b785a Add kaluga version 1.3
.. this board is nearly the same as the "1.2" version originally
released, but makes a few changes to reduce pin conflicts between the 13-pin
camera header and the bootstrapping pins.  "1.3" was introduced in summer
2020-- check the bottom of your board silk to find out whether you have a 1.2
or a 1.3, because it's not clear whether there is remaining 1.2 stock.

Another vexing fact about the 1.3 is that its LCD can have one of two
chipets, and the chipset used is not marked anywhere!
2021-06-08 13:28:48 -05:00
Damien George 20a8f4f7ec tests/unix: Add ffi test for integer types.
Signed-off-by: Damien George <damien@micropython.org>
2021-06-06 22:52:25 +10:00
Maureen Helm 5cb2ade65b zephyr: Update to Zephyr v2.6.0.
Updates the zephyr port build instructions and CI to use the latest
zephyr release tag.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2021-06-06 20:17:42 +10:00
Damien George b15e1ef5a6 github/workflows: Add workflow to build and run unix port on ARM.
Following on from ef16834887, this adds a
coverage build and running of the test suite on an ARM 32-bit Linux-based
architecture.

Signed-off-by: Damien George <damien@micropython.org>
2021-06-05 11:03:09 +10:00
Damien George 934505ac33 tools/ci.sh: Build mpy-cross as part of ci_mimxrt_build.
Signed-off-by: Damien George <damien@micropython.org>
2021-06-02 00:02:21 +10:00
Damien George a60ad33641 tools/mpremote: Add new CLI utility to interact with remote device.
This has been under development since April 2017.  See #3034 and #6375.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-29 17:17:22 +10:00
Damien George e4ba57c5cd tools/pyboard.py: Add "soft_reset" option to Pyboard.enter_raw_repl().
Signed-off-by: Damien George <damien@micropython.org>
2021-05-29 17:17:22 +10:00
Damien George 4982d0920e tools/pyboard.py: Track raw REPL state via in_raw_repl variable.
Signed-off-by: Damien George <damien@micropython.org>
2021-05-29 17:17:22 +10:00
Damien George ef16834887 github/workflows: Add workflow to build and run unix port on MIPS.
This adds a coverage build and running of the test suite on a MIPS 32-bit
big endian architecture.  It uses the feature of qemu to execute foreign
code as though it were native to the system (using qemu user mode).  The
code compiled for MIPS will run under the qemu VM, but all syscalls made by
this code go to the host (Linux) system.

See related #7268 and #7273.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-26 16:33:18 +10:00
Damien George e7c0a8bca3 tools/ci.sh: Build Cortex-A9 sabrelite board as part of qemu-arm CI.
Signed-off-by: Damien George <damien@micropython.org>
2021-05-26 16:24:00 +10:00
Damien George f5cba77e50 tools/tinytest-codegen.py: Add command-line option to exclude tests.
Signed-off-by: Damien George <damien@micropython.org>
2021-05-26 16:24:00 +10:00
Damien George 2c1a6a237d tools/mpy-tool.py: Support relocating ARMv6 arch.
Signed-off-by: Damien George <damien@micropython.org>
2021-05-26 16:24:00 +10:00
Philipp Ebensberger 5f68f0d08a github/workflows: Add CI workflow for mimxrt port. 2021-05-26 00:12:45 +10:00
Damien George 3b950ed295 tools/ci.sh: Use FROZEN_MANIFEST in an esp32 build to test feature.
This tests that FROZEN_MANIFEST works with cmake (on esp32 at least).

Signed-off-by: Damien George <damien@micropython.org>
2021-05-23 00:01:37 +10:00
Maureen Helm a7a9f2fe89 tools/ci.sh: Update zephyr docker image to v0.17.3.
Updates the zephyr docker image and SDK to the latest versions.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2021-05-21 21:55:46 +10:00
Tobias Thyrrestrup 247d7e2e8e tools/pydfu.py: Remove default VID/PID values.
As the new default behaviour, this allows PyDFU to be used with all
devices, not just the ones matching a specific set of VID/PID values.  But
it's still possible to specify VID/PID if needed to narrow down the
selection of the USB device.

Signed-off-by: Tobias Thyrrestrup <tt@LEGO.com>
2021-05-21 15:39:40 +10:00
Damien George 04927dfaca tools/mpy_ld.py: Support R_X86_64_GOTPCREL reloc for x86-64 arch.
This can be treated by the linker the same as R_X86_64_REX_GOTPCRELX,
according to https://reviews.llvm.org/D18301.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-20 23:34:20 +10:00
Jeff Epler 47947dc23c
Merge pull request #4749 from tannewt/merge_1.15
Merge in MicroPython 1.15
2021-05-12 20:52:11 -05:00
Scott Shawcroft 966d25c6a5
Merge MicroPython v1.15 into CircuitPython 2021-05-12 17:51:42 -07:00
Jeff Epler 35f1da4c1a gen_display_resources: Always treat the sample file as utf-8.
This may help resolve the build problems reported at
#4750.
2021-05-11 21:48:06 -05:00
Scott Shawcroft e02a26453c
Merge MicroPython 1.14 into CircuitPython 2021-05-11 15:07:40 -07:00
Jeff Epler d9ee63b0c1 run updated black 2021-05-08 20:42:52 -05:00
Jeff Epler aca9d5bc40 Fix up all natmod examples
* modframebuf: _mp_framebuf_p_t is not "really" a protocol, but the
   QSTR assignment caused problems when building as a dynamic module
 * modure: str_index_to_ptr is not in the natmod API, disable URE match
   spans when dynamic.  mp_obj_len() is a bugfix, we should throw here
   if the object is not string-like
 * moduzlib: Correct paths to uzlib headers & sources.  this relative
   path (from moduzlib.c to the referenced file) works in all cases,
   the other only worked from ports/PORTNAME.
 * dynruntime: Handle 2-arg m_malloc, assert_native_inited, add a
   micropythonish mp_arg_check_num_mp, fix mp_raise_msg to use dumb
   strings, add mp_raise_arg1
 * nativeglue: ad assert_native_inited
 * translate: MP_ERROR_TEXT evaluates to its argument for DYNRUNTIME
 * mpy-tool: A straggling magic number change
 * mpy_ld: Have to renumber manually after dynruntime change
 * import_mpy_native_gc.py: Update copy of features0 baked into this test
2021-05-08 20:17:16 -05:00
Jeff Epler 026cd5914d
Merge pull request #4725 from tannewt/merge_helper
Add Python helper tool for MicroPython merges.
2021-05-08 11:10:42 -05:00
Jeff Epler 5e06c91244
Merge pull request #4716 from tyomitch/main
s/Circuit Python/CircuitPython/g
2021-05-08 08:47:29 -05:00
Scott Shawcroft 20c4a325a4
Add Python helper tool for MicroPython merges.
It automates ignoring parts of MP we don't use.

Related to #2999
2021-05-07 10:21:35 -07:00
Scott Shawcroft 42f4065c8a
Merge remote-tracking branch 'adafruit/main' into merge_1.13 2021-05-06 11:17:53 -07:00
Dan Halbert ebf9dcb47a
Merge pull request #4689 from dhalbert/dynamic-usb-descriptors
Dynamic USB descriptors
2021-05-06 13:51:38 -04:00
Artyom Skrobov 908d83d1f2 s/Circuit Python/CircuitPython/g
Some comments and messages used the non-standard spelling
2021-05-06 16:22:35 +03:00
Scott Shawcroft 3fda0c0a1b
Fix board builds and use MP_ERROR_TEXT in py and extmod 2021-05-05 17:51:52 -07:00
Jeff Epler ef3ec93c8b Change the first byte of CircuitPython 'mpy' files to "C"
.. and also distinguish CircuitPython better in `mpy-cross --version`
2021-05-05 18:06:06 -05:00
Scott Shawcroft f0bb26d70f
Merge MicroPython 1.13 into CircuitPython 2021-05-04 18:06:33 -07:00
Artyom Skrobov 2d73ba2186 qstr: Use `const` consistently to avoid a cast. 2021-05-04 12:53:35 -04:00
Dan Halbert d2b558993e merge from main, including MicroPython 1.12 merge 2021-05-03 20:56:04 -04:00
Scott Shawcroft b35fa44c8a
Merge MicroPython 1.12 into CircuitPython 2021-05-03 14:01:18 -07:00
Jeff Epler dfa7c3d32d codeformat: Fix handling of `**`
After discussing with danh, I noticed that `a/**/b` would not match `a/b`.

After correcting this and re-running "pre-commit run --all", additional
files were reindented, including the codeformat script itself.
2021-04-30 15:30:13 -05:00
Jeff Epler e95e921ca1 codeformat: Fix filename matching
In #4683, tannewt noticed that uncrustify was not running on some
file in common-hal.

I investigated and found that it was not being run on a bunch of paths.

Rather than make incremental changes, I rewrote list_files to work
bsaed on regular expressions; these regular expressions are created from
the same git-style glob patterns.

I spot-checked some specific filenames after this change, and all looks good:

```
$ python3 tools/codeformat.py -v --dry-run tests/basics/int_small.py ports/raspberrypi/common-hal/pulseio/PulseIn.c extmod/virtpin.c tests/thread/thread_exit1.py  ports/raspberrypi/background.h extmod/re1.5/recursiveloop.c
tools/codeformat.py -v --dry-run tests/basics/int_small.py ports/raspberrypi/common-hal/pulseio/PulseIn.c extmod/virtpin.c tests/thread/thread_exit1.py ports/raspberrypi/background.h extmod/re1.5/recursiveloop.c
uncrustify -c /home/jepler/src/circuitpython/tools/uncrustify.cfg -lC --no-backup extmod/virtpin.c ports/raspberrypi/background.h ports/raspberrypi/common-hal/pulseio/PulseIn.c
black --fast --line-length=99 -v tests/thread/thread_exit1.py
```
recursiveloop and int_small are excluded, while PulseIn, virtpin,
and background are included.

Testing running from a subdirectory (not _specifically_ supported though):
```
(cd ports && python3 ../tools/codeformat.py -v --dry-run raspberrypi/common-hal/pulseio/PulseIn.c ../extmod/virtpin.c)
../tools/codeformat.py -v --dry-run raspberrypi/common-hal/pulseio/PulseIn.c ../extmod/virtpin.c
uncrustify -c /home/jepler/src/circuitpython/tools/uncrustify.cfg -lC --no-backup ../extmod/virtpin.c raspberrypi/common-hal/pulseio/PulseIn.
```

As a side-effect, a bunch more files are re-formatted now. :-P
2021-04-30 10:48:08 -05:00
Dan Halbert b5efce12cd delete hid .py; undo some debugging changes 2021-04-29 23:05:31 -04:00
Dan Halbert f06d54524d merge from adafruit 2021-04-28 23:48:26 -04:00
Steve App 326dd7f0db tools/makemanifest.py: Show directory name if there is a FreezeError. 2021-04-29 12:36:07 +10:00
iabdalkader 0f78c36c5a tools/gen-cpydiff.py: Fix formatting of doc strings for new Black.
Since version 21.4b0, Black now processes one-line docstrings by stripping
leading and trailing spaces, and adding a padding space when needed to
break up """"; see https://github.com/psf/black/pull/1740

This commit makes the Python code in this repository conform to this rule.
2021-04-27 23:41:21 +10:00
Scott Shawcroft 76033d5115
Merge MicroPython v1.11 into CircuitPython 2021-04-26 15:47:41 -07:00
Dan Halbert c26e49c2e6 wip: starting to try to compile 2021-04-25 23:17:41 -04:00
Dan Halbert 9d1fcc3b14 merge from main 2021-04-25 10:27:52 -04:00
Damien George 178198a01d tools/pyboard.py: Support opening serial port in exclusive mode.
This is now the default, but can be overridden with CLI `--no-exclusive`,
or constructing `Pyboard(..., exclusive=False)`.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-23 22:41:00 +10:00
Damien George ac1d01d43e tools/upip.py: Use .errno instead of .args[0] for OSError exceptions.
Signed-off-by: Damien George <damien@micropython.org>
2021-04-23 22:03:46 +10:00
David Michieli 5669a60954 stm32/mboot: Allow unpacking dfu without secret key.
- unpack-dfu command no longer requies a secret key to be present
- pack-dfu command raises an exception if no secret key is found
2021-04-23 11:04:37 +10:00
Scott Shawcroft 09f7b43c64
Merge MicroPython 1.10 into CircuitPython 2021-04-21 15:59:17 -07:00
Damien George b74dc546fc tools/metrics.py: Add rp2 port to table of ports that can be built.
Signed-off-by: Damien George <damien@micropython.org>
2021-04-20 21:39:53 +10:00
Scott Shawcroft b057fb8a4b
codeformat 2021-04-19 22:22:44 -07:00
Dan Halbert 51ccf8dc30 wip: revert usb_descriptor changes; use raw descriptors instead 2021-04-19 23:24:18 -04:00
Damien George a9bbf7083e tools/ci.sh: Build esp32 using IDF v4.0.2 and v4.3.
To test different IDF's, and also test building the GENERIC_S2 board.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-15 10:31:06 +10:00
Dan Halbert 2a58b667aa wip: incorporate new hid descriptor building 2021-04-12 23:42:48 -04:00
Scott Shawcroft 2a78a5154f
Merge pull request #4594 from Neradoc/patch-1
fix removing past releases from circuitpython.org
2021-04-12 15:46:04 -07:00
Neradoc b8d55d6dbf
fix removing past releases from circuitpython.org
When releasing a new stable, unstable releases would be left in because the past stable was removed.
2021-04-12 23:37:41 +02:00
Dan Halbert 3e5bc5a05d wip 2021-04-08 23:19:55 -04:00
Artyom Skrobov c3e40d50ab [qstr] Separate hash and len from string data
This allows the compiler to merge strings: e.g. "update",
"difference_update" and "symmetric_difference_update"
will all point to the same memory.

Shaves ~1KB off the image size, and potentially allows
bigger savings if qstr attrs are initialized in qstr_init(),
and not stored in the image.
2021-04-06 12:58:42 -04:00
Damien George d35f12f5ca tools/metrics.py: Fix esp32 output filename due to move to CMake.
Signed-off-by: Damien George <damien@micropython.org>
2021-04-06 12:50:19 +10:00
Dan Halbert 0357af1726 Put mouse before gamepad due to MacOS being finicky 2021-04-04 21:48:54 -04:00
Neradoc 12b0ee0a3e add alias boards and bus_device to the support matrix
add list with manual brand names for aliases
the new info in the support_matrix is used in build_board_info.py
2021-04-02 13:36:06 +02:00
Damien George d87f42b0e5 examples/usercmodules: Simplify user C module enabling.
It's a bit of a pitfall with user C modules that including them in the
build does not automatically enable them.  This commit changes the docs and
examples for user C modules to encourage writers of user C modules to
enable them unconditionally.  This makes things simpler and covers most use
cases.

See discussion in issue #6960, and also #7086.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-01 16:27:38 +11:00
Michael O'Cleirigh 17b1f82121 tools/ci.sh: Build user C modules for esp32.
Builds the esp32 port against the example C and CXX modules.

Signed-off-by: Michael O'Cleirigh <michael.ocleirigh@rivulet.ca>
2021-04-01 15:44:10 +11:00
Dan Halbert c41639f30a add en_GB translation to builds 2021-03-31 15:09:55 -04:00
Dan Halbert c9f2591d7c Turn off remote wakeup in USB configuration descriptor 2021-03-31 10:12:16 -04:00
Phil Howard 5976ea02a5 tools/ci.sh: Add CI for CMake USER_C_MODULE support.
Builds the rp2 port against the example C and CXX modules.

Signed-off-by: Phil Howard <phil@pimoroni.com>
2021-03-31 00:28:52 +11:00
Neradoc 38072a139e no default value for support_matrix[board_id]
will raise an error during build if things as not as expected
as suggested by @jepler
2021-03-29 19:03:35 +02:00
Neradoc f143e5d049 fix list of modules for alias boards 2021-03-29 12:25:25 +02:00
Scott Shawcroft aec0ef3cbf
Switch devices.h to nvm.toml data 2021-03-25 09:57:18 -07:00
Neradoc 6b89883797 sort languages in a way that is not case sensitive 2021-03-25 02:57:04 +01:00
Neradoc 36f91fe022 implement issue #4470
move the language allow list to generate_download_info() and use it there too
2021-03-24 23:39:47 +01:00
Jeff Epler b9a973c8e0 codeformat: Do search&replace without sed 2021-03-15 19:23:16 -05:00
Jeff Epler 253385d9b7 codeformat: use pathlib for correct(-er) processing of * vs ** in globs 2021-03-15 18:10:43 -05:00
Jeff Epler 0403a2cca5 codeformat: Run sed only on requested files
When running from pre-commit, we believe the different invocations of
sed were racing with each other, sometimes leaving zero-byte files in
the filesystem (ow)
2021-03-15 18:10:43 -05:00
Jeff Epler ed61e8955d codeformat: require filenames, filter them by include/exclude lists 2021-03-15 18:10:43 -05:00
Jeff Epler d0e3848b24 codeformat: Exclude specified files even from commandline, for pre-commit 2021-03-15 18:10:43 -05:00
microDev a52eb88031
run code formatting script 2021-03-15 19:27:36 +05:30
microDev 090b6ba42f
update pre-commit
- add formatting check
- add translations check
2021-03-15 19:26:29 +05:30
Damien George 6129b8e401 tests: Rename run-tests to run-tests.py for consistency.
Signed-off-by: Damien George <damien@micropython.org>
2021-03-12 19:56:09 +11:00
Jeff Epler bddd6b013d build_release_files: Only build languages in an allow-list 2021-03-01 15:28:58 -06:00
Damien George cdaec0dcaf tools/pydfu.py: Support DFU files with elements of zero size.
Instead of raising a ZeroDivisionError, this tool now just skips any
elements in the DFU file that have zero size.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-23 14:33:31 +11:00
Jeff Epler 144acfcb98 USB descriptors: Save flash storage for serial number
This saves about 60 bytes (Feather M4 went from 45040 -> 45100 bytes free)
66 bytes of data eliminated, but 6 bytes paid back to initialize the length
field.
2021-02-21 21:24:49 -06:00
iTitou d334d781e1 tools/verifygitlog.py: Show required format regexp in error message.
Signed-off-by: iTitou <moiandme@gmail.com>
2021-02-21 15:55:44 +11:00
David Michieli 2eed9780ba stm32/mboot: Add unpack-dfu command to mboot_pack_dfu.py tool.
This command unpacks a previously packed DFU file, writing out a DFU which
should be the same as the original (before packing).
2021-02-17 11:36:44 +11:00
Dan Halbert c26de0136a works! no timeouts 2021-02-16 17:39:36 -05:00
Maureen Helm 56a36899bd tools/ci.sh: Update zephyr docker image to v0.11.13.
Updates the zephyr docker image to the latest, v0.11.13. This updates CI
to use zephyr SDK v0.12.2 and GCC v10.2.0 for the zephyr port.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2021-02-16 09:01:05 -06:00
Maureen Helm f573e73bae zephyr: Build MicroPython as a cmake target.
Refactors the zephyr build infrastructure to build MicroPython as a
cmake target, using the recently introduced core cmake rules.

This change makes it possible to build the zephyr port like most other
zephyr applications using west or cmake directly. It simplifies building
with extra cmake arguments, such as specifying an alternate conf file or
adding an Arduino shield. It also enables building the zephyr port
anywhere in the host file system, which will allow regressing across
multiple boards with the zephyr twister script.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2021-02-16 18:49:30 +11:00
Maureen Helm 2aa57931a6 zephyr: Update to zephyr v2.5.0.
Updates the zephyr port build instructions and CI to use the latest
zephyr release tag.

Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
2021-02-16 18:38:13 +11:00
Jim Mussared 566020034f tools/makemanifest.py: Allow passing option args to include().
This allows customising which features can be enabled in a frozen library.

e.g. `include("path.py", extra_features=True)`

in path.py:

    options.defaults(standard_features=True)

    if options.standard_features:
        # freeze standard modules.
    if options.extra_features:
        # freeze extra modules.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-02-16 17:24:21 +11:00
Damien George aa3d6b6aa5 tools/ci.sh: Change esp32 CI to work with idf.py and IDF v4.0.2.
Signed-off-by: Damien George <damien@micropython.org>
2021-02-15 16:40:11 +11:00
Brianna Laugher d128999938 tools: Add filesystem action examples to pyboard.py help.
Signed-off-by: Brianna Laugher <brianna.laugher@gmail.com>
2021-02-13 14:37:28 +11:00
Dan Halbert d54b5861a3 wip 2021-02-12 19:01:14 -05:00
Damien George c9260dda23 rp2: Use local tinyusb instead of the one in pico-sdk.
So that all MicroPython ports that use tinyusb use the same version.  Also
requires fewer submodule checkouts when building rp2 along with other ports
that use tinyusb.

Signed-off-by: Damien George <damien@micropython.org>
2021-02-12 12:56:28 +11:00
Dan Halbert f0564b4986 merge from upstream; complicated webusb merge 2021-02-11 18:50:02 -05:00
foamyguy 5c3371bd1a fix bitmap_font path in display resource gen 2021-02-05 18:05:37 -06:00
Dan Halbert 0802b22ed6 usb descriptors all set; rework of enabling for USB devices 2021-02-04 19:23:40 -05:00
Kevin Banks 1352938504 Changed URL 2021-02-04 16:35:42 -06:00
FiriaCTO e72069e241
Fix typo in comment
descriptors should be plural

Co-authored-by: Dan Halbert <halbert@halwitz.org>
2021-02-04 16:18:36 -06:00
Kevin Banks 4d90f198ec (I could have sworn I deleted that line...) 2021-02-03 18:54:03 -06:00
Kevin Banks f2067730cb Code cleanup and added a WEBUSB_README file 2021-02-03 18:51:48 -06:00
Kevin Banks 215a56c920 Merge branch 'main' into webusb (trying to get CI back online) 2021-02-03 16:48:28 -06:00
Kevin Banks 00926b687a Trying to keep two ARM builds from overflowing their FLASH 2021-02-03 11:16:19 -06:00
Kevin Banks 1a9e4f5613 Restored accidentally deleted character 2021-02-01 18:51:11 -06:00
Kevin Banks 817ca39f59 ITF_NUM_VENDOR is now automatically computed at run-time 2021-02-01 18:35:58 -06:00
stijn c2b5bfcc0c tools: Remove obsolete upip bootstrap script.
The upip module is frozen into ports supporting it, and it is included in
the source tree, so there is no need to get it from PyPi.  Moreover the
PyPi package referred to is an out-of-date version of upip which is
basically unrelated to our upip.py because the source is taken from a fork
of micropython-lib instead of this repository.
2021-01-30 14:39:22 +11:00
Jim Mussared 2aecf378be tools/makemanifest.py: Add check that freeze path is a directory.
Avoids accidentally writing

    freeze("path/to/file.py")

and getting unexpected results.
2021-01-30 14:15:33 +11:00
stijn 37c2f507a0 github/workflows: Add workflow to verify commit message format.
Using the new tools/verifygitlog.py script.
2021-01-30 14:09:21 +11:00
stijn d48860c7dd tools/verifygitlog.py: Add script for verifying commit message format.
The main rules enforced are:
- At most 72 characters in the subject line, with a ": " in it.
- At most 75 characters per line in the body.
- No "noreply" email addresses.
2021-01-30 14:08:29 +11:00
Damien George b8f4c623f9 github/workflows: Add CI workflow for rp2 port.
Signed-off-by: Damien George <damien@micropython.org>
2021-01-30 00:42:29 +11:00
Damien George fe16e785fe tools/mpy-tool.py: List frozen modules in MICROPY_FROZEN_LIST_ITEM.
Signed-off-by: Damien George <damien@micropython.org>
2021-01-29 23:57:10 +11:00
Damien George 5d68b5e22c tools/ci.sh: For ci_code_size_setup, update apt to install gcc-multilib.
Signed-off-by: Damien George <damien@micropython.org>
2021-01-29 23:57:10 +11:00
Kevin Banks 63f9b12fe6 Partially hard-coded VENDOR descriptor has been added. First build to be accessed via WebUSB. NOTE - had to disable HID (EndPoint shortage?) 2021-01-28 20:22:31 -06:00
Scott Shawcroft 9325509b54
Fix blinka release PR language list 2021-01-27 14:08:52 -08:00
Kevin Banks 1b031508e1 BOS and MS_OS_2.0 descriptors have been added. Still more descriptor work TODO. 2021-01-26 20:43:19 -06:00
Kevin Banks fbfb7b68cc Most of the code we need has been pulled in from the tinyusb webusb_serial demo. Still LOTS to do regarding descriptors. 2021-01-25 20:37:58 -06:00
Damien George 203e1d2a65 tools/ci.sh: For code size build, fetch history of master branch only.
It's not necessary to fetch all branches.

Signed-off-by: Damien George <damien@micropython.org>
2021-01-24 15:02:20 +11:00
Kevin Banks 9ce33a5771 Now generates the WebUSB URL Descriptor. Still need to generate the Vendor Descriptors. 2021-01-22 08:16:10 -06:00
Scott Shawcroft 733094aead
Add initial RP2040 support
The RP2040 is new microcontroller from Raspberry Pi that features
two Cortex M0s and eight PIO state machines that are good for
crunching lots of data. It has 264k RAM and a built in UF2
bootloader too.

Datasheet: https://pico.raspberrypi.org/files/rp2040_datasheet.pdf
2021-01-20 19:16:56 -08:00
Kevin Banks 84d7a0da9d Initial steps, mostly via clone and modify. 2021-01-20 20:24:42 -06:00
Damien George de2374cdc6 tools/ci.sh: Pip install pyhy for stm32 builds.
Signed-off-by: Damien George <damien@micropython.org>
2021-01-18 12:43:01 +11:00
Jeff Epler 537a4daabd mark script as executable 2020-12-29 14:06:32 -06:00
Damien George ee52f89224 tools/ci.sh: Use pip-install to get latest version of esptool.py.
Because the version included in xtensa-lx106-elf-standalone.tar.gz needs
Python 2 (and pyserial for Python 2).

Signed-off-by: Damien George <damien@micropython.org>
2020-12-14 13:09:33 +11:00
Damien George 69262a11dc tools/ci.sh: Put echo of CI path in a separate function.
Because the setup functions may print other information which should not be
added to the path.

Signed-off-by: Damien George <damien@micropython.org>
2020-12-14 13:05:43 +11:00
Damien George cb1bb7592e stm32/Makefile: Change -O0 to -Og for DEBUG=1 builds.
The -Og optimisation level produces a more realistic build, gives a better
debugging experience, and generates smaller code than -O0, allowing debug
builds to fit in flash.

This commit also assigns variables in can.c to prevent warnings when -Og is
used, and builds a board in CI with DEBUG=1 enabled.

Signed-off-by: Damien George <damien@micropython.org>
2020-12-07 22:27:38 +11:00
Damien George a59282b9bf tools/pyboard.py: Add fast raw-paste mode.
This commit adds support to pyboard.py for the new raw REPL paste mode.

Note that this new pyboard.py is fully backwards compatible with old
devices (it detects if the device supports the new raw REPL paste mode).

Signed-off-by: Damien George <damien@micropython.org>
2020-12-01 22:35:13 +11:00
Damien George 547e8a9fe7 tools/ci.sh: Add helper script to run CI tasks.
The aim is for this script to be used on any CI platform, as well as run
locally.

Signed-off-by: Damien George <damien@micropython.org>
2020-11-29 22:21:28 +11:00
Dan Halbert 65e2fe4654 fix stub problems; touch up doc 2020-11-27 23:27:15 -05:00
Scott Shawcroft b9bec87f29
Update build board info.
* Don't add full urls because they are too large.
* Remove the unstable version when it starts with the current
  version.
2020-11-18 17:38:06 -08:00
sw23 ad166ca479 Fixing make stub warnings and mypy issuesmak 2020-10-29 20:15:34 -04:00
awachtler 56e0932485 tools/upip.py: Support explicit port number in host.
Adding a port number other then 443 to a PyPI URL may be needed if a local
server like devpi is used.
2020-10-20 12:44:30 +11:00
Scott Shawcroft 29af7068d4
Ignore duplicate USB PID for prerelease version 2020-09-30 11:33:54 -07:00
Scott Shawcroft 17bdc969db
Reorganize sdkconfigs and release UF2s 2020-09-17 16:01:23 -07:00
Scott Shawcroft 4b827b25ad
Merge pull request #2966 from sommersoft/ci_check_vid_pid
Automate USB VID/PID Uniqueness Check
2020-09-17 11:48:46 -07:00
Scott Shawcroft 95e27bb8bf
Add more PIDs for unique boards 2020-09-15 13:43:35 -07:00
stijn 4b35aa5730 tools: Write msvc-compatible frozen content.
The msvc compiler doesn't accept zero-sized arrays so let the freezing
process generate compatible C code in case no modules are found and the
involved arrays are all empty.  This doesn't affect the functionality in
any way because those arrays only get accessed when mp_frozen_mpy_names
contains names, i.e.  when modules are actually found.
2020-09-11 10:51:55 +10:00
Scott Shawcroft 9256e6b376
Merge pull request #3302 from xiongyihui/main
support to get HID OUT report
2020-09-10 17:35:04 -07:00
Damien George 4f2fe34623 tools/mpy-tool.py: Fix merge of multiple mpy files to POP_TOP correctly.
MP_BC_CALL_FUNCTION will leave the result on the Python stack, so that
result must be discarded by MP_BC_POP_TOP.

Signed-off-by: Damien George <damien@micropython.org>
2020-09-09 00:11:51 +10:00
Dan Halbert 07e2fc721a
Remove debugging print-out for endpoint checking. 2020-08-30 23:14:50 -04:00
Damien George 06659077a8 all: Update Python code to conform to latest black formatting.
Updating to Black v20.8b1 there are two changes that affect the code in
this repository:

- If there is a trailing comma in a list (eg [], () or function call) then
  that list is now written out with one line per element.  So remove such
  trailing commas where the list should stay on one line.

- Spaces at the start of """ doc strings are removed.

Signed-off-by: Damien George <damien@micropython.org>
2020-08-29 15:18:01 +10:00
Jeff Epler a03b6a99e6 gen_usb_descriptor: Fix off-by-1 error in endpoint counting 2020-08-27 15:10:52 -05:00
Lucian Copeland ad733e6c4a rename reader tool 2020-08-26 17:37:05 -04:00
Damien George 448319a745 tools/makemanifest.py: Use os.makedirs to make path for generated files.
The existing implementation of mkdir() in this file is not sophisticated
enough to work correctly on all operating systems (eg Mac can raise
EISDIR).  Using the standard os.makedirs() function handles all cases
correctly.

Signed-off-by: Damien George <damien@micropython.org>
2020-08-22 11:18:48 +10:00
Martin Milata 492cf34fd8 tools/mpy-tool.py: Fix offset of line number info.
Signed-off-by: Martin Milata <martin@martinmilata.cz>
2020-08-21 16:17:07 +10:00
Michael Buesch 60cf2c0959 tools/pyboard.py: Replace eval() of received data with alternative.
Prior to this commit, pyboard.py used eval() to "parse" file data received
from the board.  Using eval() on received data from a device is dangerous,
because a malicious device may inject arbitrary code execution on the PC
that is doing the operation.

Consider the following scenario:

Eve may write a malicious script to Bob's board in his absence.  On return
Bob notices that something is wrong with the board, because it doesn't work
as expected anymore.  He wants to read out boot.py (or any other file) to
see what is wrong.  What he gets is a remote code execution on his PC.

Proof of concept:

Eve:

  $ cat boot.py
  _print = print
  print = lambda *x, **y: _print("os.system('ls /; echo Pwned!')", end="\r\n\x04")
  $ ./pyboard.py -f cp boot.py :
  cp boot.py :boot.py

Bob:

  $ ./pyboard.py -f cp :boot.py /tmp/foo
  cp :boot.py /tmp/foo
  bin   chroot  dev  home  lib32  media  opt   root  sbin  sys  usr
  boot  config  etc  lib   lib64  mnt    proc  run   srv   tmp  var
  Pwned!

There's also the possibility that the device is malfunctioning and sends
random and possibly dangerous data back to the PC, to be eval'd.

Fix this problem by using ast.literal_eval() to parse the received bytes,
instead of eval().

Signed-off-by: Michael Buesch <m@bues.ch>
2020-08-21 16:08:03 +10:00
Jeff Epler 23aefe9509 Add usb-endpoint-count checking
.. however, the number of endpoints is only set for SAMD (8).
Other ports need to set the value.  Otherwise, the build will show
the message
```
Unable to check whether maximum number of endpoints is respected
```
2020-08-19 16:47:40 -05:00
Yihui Xiong 8bab7b664c support to get HID OUT report 2020-08-19 20:18:17 +08:00
Jeff Epler 5056027238 gen_display_resources: report missing character count, if any 2020-08-18 19:25:09 -05:00
Jeff Epler 880fe1a694 gen_display_resources: silence 'missing character' message
Since we made the decision to allow translations which do not have coverage in
the terminal font, these routinely occur and are expected.  The message is
unhelpful and due to their voume make it harder to find relevant information
particularly in github actions results.
2020-08-16 20:58:24 -05:00
Jeff Epler 1cf3762392 Merge remote-tracking branch 'origin/main' into stm32-sdioio 2020-08-10 12:54:12 -05:00
Damien George b731bd0ce6 tools/makemanifest.py: Print nicely formatted errors from mpy-cross.
If mpy-cross exits with an error be sure to print that error in a way that
is readable, instead of a long bytes object.

Signed-off-by: Damien George <damien@micropython.org>
2020-08-08 14:46:05 +10:00
Taku Fukada 272d300fc8 Fix Read the Docs bulid failing 2020-08-08 01:33:24 +09:00
Taku Fukada 56c898da80 Modify some Python stubs 2020-08-07 01:01:28 +09:00
Jeff Epler af135a7560 atmel-samd: move samd-specific script 2020-07-30 07:18:02 -05:00
hathach b2ec77e554 Merge remote-tracking branch 'adafruit/main' into improve-highspeed-usb 2020-07-29 23:14:52 +07:00
Jeff Epler fbc78972eb
Merge pull request #3203 from WarriorOfWire/speed_up_builds
Use 2 cores per build task in github CI build
2020-07-29 11:09:09 -05:00
hathach 1f4fcb399b
move CFG_TUSB_RHPORT0_MODE into generated header 2020-07-29 16:05:31 +07:00
hathach 6063828279 replace USB_MSC_MAX_PACKET_SIZE with USB_HIGHSPEED in descriptor gen tool 2020-07-29 15:38:55 +07:00
Scott Shawcroft 6afbefc739
Merge pull request #3219 from adafruit/encoding
fix windows' encoding defaults
2020-07-28 14:00:44 -07:00
lady ada 5b675cc83f fix windows' encoding defaults 2020-07-28 14:19:43 -04:00
Damien George 952de5cb77 tools/makemanifest.py: Use errno.EEXIST instead of number 17.
To make this code more portable, across different platforms.

Signed-off-by: Damien George <damien@micropython.org>
2020-07-26 10:56:24 +10:00
Kenny ebc1373c08 use -j2 in the actual build also 2020-07-25 10:23:42 -07:00
Kenny 11d225fe62 Use 2 cores per job in github build
As of today, https://docs.github.com/en/actions/reference/virtual-environments-for-github-hosted-runners
states that hosted runners have a 2-core CPU.

This uses make -j $physical_cores to try and be better about utilizing the time spent on those machines.
When github upgrades runners to have more cores we'll benefit from that too.
2020-07-24 22:08:56 -07:00
Taku Fukada 54a342a7f5 Add and correct some type hints 2020-07-24 18:20:03 +09:00
Scott Shawcroft 2bd6d05663
Add externs. GCC10 complains about duplicate defines 2020-07-22 16:26:46 -07:00
Scott Shawcroft 02b71e013a
Merge pull request #3107 from dherrada/type_hints
Adding type hints
2020-07-22 13:48:45 -07:00