Commit Graph

386 Commits

Author SHA1 Message Date
Sean Cross 0169ea5155 nrf: discard arm exception sections
Since these exceptions are unused, don't include them in the output
binary.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:49 +08:00
Sean Cross 595f6387c2 watchdog: rename module from `wdt` and move to `microcontroller`
This also places it under the `microcontroller` object.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:49 +08:00
Sean Cross fbe1c05832 nrf: simmel: enable wdt support
This enables WDT support for Simmel. Other platforms cannot yet use
WDT because it overflows their flash storage.

Enable CIRCUITPY_WDT support for the nrf target.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:48 +08:00
Sean Cross 17ef2df2ca nrf: ld: add ARM.exidx to output image
With the WDT changes, building Circuit Python results in the following error:

/opt/gcc-arm-none-eabi-9-2019-q4-major/bin/../lib/gcc/arm-none-eabi/9.2.1/../../../../arm-none-eabi/bin/ld: section .ARM.exidx LMA [00000000000621c8,00000000000621cf] overlaps section .data LMA [00000000000621c8,0000000000062383]

This is because unwinding data is getting generated, but has nowhere to go.
Re-enable this data in the linker script so it is saved.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:48 +08:00
Dan Halbert 19f0d82048
Merge pull request #2955 from BradChan/master
Add hiibot_bluefi board definitions
2020-05-26 15:37:35 -04:00
Sean Cross f002c784c0 nrf: linker: add a new .uninitialized section
This section immediately follows the .bss section, and is designed to
contain uninitialized variables that should persist across reboots.

The section is placed directly after .bss, under the theory that the
size of Circuit Python's .bss + .data is bigger than the bootloader's
.bss + .data, so there is less likely to be a conflict.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-18 11:52:17 +08:00
cyz 4f7b4241a2 add hiibot_bluefi 2020-05-18 09:42:37 +08:00
Sean Cross ffaeeda749 nrf: simmel: decrease flash filesystem size
The flash filesystem must be reduced in order to allow the current
build to fit.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-12 09:31:51 +08:00
Sean Cross f7fcd43516 nrf: simmel: disable SPIM3
Disable the SPIM3 controller to avoid needing to dedicate 8 kB to
the SPIM3 block.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-12 09:31:51 +08:00
Sean Cross 79c055f958 nrf: simmel: enable aesio
This adds AES support to simmel.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-12 09:31:51 +08:00
Sean Cross 235098efb8 nrf: simmel: correct CSn pin
The CSn pin is pin 6 on bank 1, not bank 0.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-12 09:31:51 +08:00
Scott Shawcroft 62b835ad76
Merge pull request #2833 from xiongyihui/pitaya-go
add nRF52840 based Makerdiary Pitaya Go
2020-05-11 16:34:27 -07:00
Dan Halbert bae7a5e433 make translate again 2020-05-04 17:26:59 -04:00
Dan Halbert 4d7e341e44
Merge pull request #2844 from xobs/add-nrf-pca10100
nrf: add pca10100
2020-05-04 10:51:01 -04:00
Sean Cross b128399d1e nrf: simmel: enable CIRCUITPY_USB_HID
Simmel had USB HID disabled in order to save space.  However, the board
configuration did not set USB_DEVICES, causing it to inherit the default
device bouquet of MSC,CDC,MIDI,HID.  This in turn caused HID to be included
in the USB Configuration Descriptor.

For some reason, this was not a problem in an earlier version of tinyusb or
circuitpython.  However, in the most recent version this has rightfully
caused asserts to appear during configuration.

Re-enable USB_HID for now, as it doesn't add too much in terms of space.
We may disable it again later on if we become pressed for space.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-04 15:37:53 +08:00
Sean Cross cb4fc894d7 nrf: add pca10100
This is the nRF52833-DK board.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-04 15:07:49 +08:00
Yihui Xiong 7dd3ddc06b use Nordic's VID which seems to be allowed
https://devzone.nordicsemi.com/f/nordic-q-a/50638/usb-pid-for-nrf52840
2020-05-01 06:10:43 +00:00
Scott Shawcroft 1ca90572f1
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-04-30 13:25:31 -07:00
Scott Shawcroft 74a2d0944a
Merge pull request #2834 from Teknikio/fix/bluebird_pinout
Update teknikio bluebird pin assignments
2020-04-30 11:50:02 -07:00
JoeBakalor 36a71560c2 update teknikio bluebird pin assignments 2020-04-30 09:58:27 -04:00
Yihui Xiong 4393a88fb6 add nRF52840 based Makerdiary Pitaya Go 2020-04-30 07:38:20 +00:00
Dan Halbert 180f5c6a94 Merge remote-tracking branch 'adafruit/master' into ringbuf-fixes 2020-04-29 22:11:22 -04:00
Scott Shawcroft a30ff70b4e
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-04-29 10:51:21 -07:00
Sean Cross 1d0781bf12 nrf: add simmel board
This adds support for Simmel, an nRF52833-based bluetooth tracking
board designed to aid in pandemic tracing.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-29 11:40:00 +08:00
TG-Techie b9e494b85a add submodule to TG-Watch02A 2020-04-28 00:03:02 -04:00
TG-Techie 76b466a38a add submodule to TG-Watch02A 2020-04-27 22:49:30 -04:00
Scott Shawcroft 755d404edf
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-04-27 16:45:10 -07:00
Dan Halbert 77cd93ac2d merge from adafruit 2020-04-21 17:47:51 -04:00
Dan Halbert 38ec3bc574 further ringbuf cleanup 2020-04-21 17:38:20 -04:00
Sean Cross 3ed5b87b8f nrf: add support for nrf52833
This adds preliminary support for the nRF52833, which is a variant of
the nRF52840 with half the RAM, half the flash, and fewer peripherals.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-21 12:29:56 +08:00
Scott Shawcroft b580b34cbf
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-04-14 17:14:44 -07:00
Jeff Epler 09dc46a984 Add Protomatter and FramebufferDisplay 2020-04-14 18:24:54 -05:00
Scott Shawcroft 8fe512c7e9
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-03-31 15:13:58 -07:00
Jeff Epler 54e8c63b4f
Merge pull request #2730 from tannewt/fix_fourwire_phase_polarity
Add polarity and phase to FourWire.
2020-03-28 07:28:37 -05:00
Scott Shawcroft 798118b74f
Update board.c's to remove remaining tick.h 2020-03-27 14:52:35 -07:00
Scott Shawcroft b043384949
Update built in display init 2020-03-27 14:35:29 -07:00
siddacious 9e0c00dfd4 adding a backlight polarity flag to Display 2020-03-25 22:51:20 -07:00
siddacious 7bba79363a allowing backlight change 2020-03-25 22:41:23 -07:00
Scott Shawcroft 85f44e20cb
Merge pull request #2695 from TG-Techie/master
Add new TG-Watch02A to the nrf boards directory
2020-03-13 10:46:48 -07:00
TG-Techie 197dc344af fix requested changes 2020-03-12 02:31:13 -04:00
TG-Techie b967a2071f changed TG-Watch02A HW_BOARD_NAME 2020-03-10 23:07:25 -04:00
TG-Techie 50b451ae0c add TG-Watch02A board def 2020-03-10 22:40:55 -04:00
TG-Techie fec84054d9 ah 2020-03-06 15:03:37 -05:00
TG-Techie 7198056bc3
Merge pull request #2 from adafruit/5.0.x
5.0.x
2020-03-06 13:57:31 -05:00
Dan Halbert b6206406de new pin validation routines; don't use mp_const_none if NULL will do 2020-02-28 23:43:04 -05:00
TG-Techie 527eb2444c added TG-Watch02A pins 2020-02-28 04:11:54 -05:00
TG-Techie 6d4ffc69fd add TG-Watch02A 2020-02-28 02:52:46 -05:00
ladyada 86e9fd170a move red LED to D13 and make D3 lsm6ds IRQ 2020-02-25 18:00:23 -05:00
Scott Shawcroft e97b0cfc61
Merge pull request #2581 from jamesbowman/master
First draft of eveL, the low-level module of the Gameduino bindings
2020-02-13 11:21:32 -08:00
Dan Halbert e00b3269fe use properly-sized SPI transactions 2020-02-12 15:04:19 -05:00
Dan Halbert 2e029d55fc nrf: add SPIM3 support 2020-02-11 19:22:14 -05:00
Drew Fustini 3bf4b42e2e change OH20 badge pin defs to use SWn for buttons
Rather than use A, B, C and D

Use the buttons according to silkscreen references:
SW1
SW2
SW3
SW4
2020-02-10 00:49:13 +01:00
Drew Fustini 0a54f88751 add pin defs for buttons on the OHS2020 badge 2020-02-10 00:32:16 +01:00
James Bowman acef93a253 Rename eveL to _eve, EVEL to _EVE 2020-02-05 18:17:58 -08:00
James Bowman 7fd30e7d20 First draft of eveL, the low-level module of the Gameduino (and BridgeTek EVE) bindings.
[adafruit/circuitpython#2578]
2020-02-03 16:46:14 -08:00
Lady Ada 5a29b222eb add bluefruit sense - tested 2020-02-03 13:52:30 -05:00
Michael Welling 64cafe82bc Adjust OHS2020 madctl for default rotation
Make to go faster I guess.

Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-02-02 22:14:10 -08:00
Michael Welling 6804b2a7fd Add I2C pin definitions for interoperability with Adafruit libraries
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-02-02 22:13:39 -08:00
Michael Welling 33dcdd7c03 Updates to enable working SPI TFT
The backlight enable is active low on our board so the driver doesn't like it.
Toggling to GPIO manually for now.

As fixed the improper SPI bus pins definitions and it works!

Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-02-02 22:13:03 -08:00
Michael Welling d99c2ffe4f QSPI flash fixes
We had the pin names swapped on the schematic and a different flash was populated.

Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-02-02 22:11:12 -08:00
Lady Ada dc964b346c adjust CLUE madctl so rotation 0 is 'right' 2020-01-31 20:17:39 -05:00
Dan Halbert be4e681d07 fix UICR check; do not use NULL for no MISO 2020-01-31 18:57:41 -05:00
Dan Halbert 4abd5f1f7b increase max connections from 2 to 5 2020-01-31 14:58:23 -05:00
Dan Halbert b6358182d3 Update CLUE to Rev C 2020-01-30 15:22:26 -05:00
Wojtek Siudzinski df5e58fc6e Add support for the Particle Ethernet FeatherWing 2020-01-28 10:53:50 +01:00
Lady Ada f2dfcee042 add missing displayref 2020-01-26 20:10:20 -05:00
Dan Halbert 68f9aee992 reset NeoPixels on CPB on soft reload 2020-01-23 20:16:31 -05:00
Michael Welling cc77e86408 Update the VID and USB company string
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-01-16 15:43:49 -08:00
Michael Welling cc03d68984 Fix backlight pin registration
Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-01-16 14:53:07 -08:00
Michael Welling 86d454adf3 Initial board support for OHS2020 Badge
Not tested but builds.

Signed-off-by: Michael Welling <mwelling@ieee.org>
2020-01-16 13:46:56 -08:00
Benny Meisels 4bf10a75c7 Add board definition files for AramCon Badge 2019 2020-01-16 00:44:18 +02:00
Scott Shawcroft 82fb761c0f
Add PacketBuffer and MTU negotiation support.
PacketBuffer facilitates packet oriented BLE protocols such as BLE
MIDI and the Apple Media Service.

This also adds PHY, MTU and connection event extension negotiation
to speed up data transfer when possible.
2020-01-03 17:29:54 -08:00
Dan Halbert f0d34da556 add display support; rotation 270 2019-12-30 17:39:39 -05:00
Dan Halbert 3f9ebd2fed initial CLUE board defn 2019-12-30 17:10:42 -05:00
JoeBakalor 2abccc1745 update vid and pid for teknikio_bluebird 2019-12-16 08:58:56 -05:00
JoeBakalor 32744a04e1 update bluebird make file 2019-12-13 09:08:21 -05:00
Joe Bakalor 3992a870e5
Merge branch 'master' into teknikio/bluebird 2019-12-13 08:55:15 -05:00
JoeBakalor 4bee6536c9 updates to bluebird 2019-12-13 08:52:03 -05:00
Joe Bakalor b484c89b73
Merge pull request #4 from adafruit/master
Pull master
2019-12-13 08:51:06 -05:00
Dan Halbert e11fabd5e0 moved nrf internal filesystem to just below bootloader 2019-12-12 14:57:23 -05:00
JoeBakalor dde7c5e145 Merge branch 'master' of https://github.com/Teknikio/circuitpython 2019-12-12 08:59:37 -05:00
Joe Bakalor bf4138b0e4
Merge pull request #3 from adafruit/master
Pull master
2019-12-12 08:59:22 -05:00
JoeBakalor 0da5dceccf update bluebird makefile 2019-12-11 15:25:16 -05:00
JoeBakalor a273a7c55e add remaining peripheral pin maps and digital/analog pin definitions 2019-12-11 15:23:16 -05:00
JoeBakalor 006d85d5c2 add make file and board configuration, add accelerometer pin mappings 2019-12-11 14:49:59 -05:00
Dan Halbert d9ca4c9a60 fix build failures 2019-12-10 22:39:44 -05:00
Dan Halbert c6221c5956 Remove no-longer-used nrf and atmel-samd .ld files 2019-12-10 21:22:17 -05:00
Dan Halbert 68ae47907c merge from upstream 2019-12-10 21:04:46 -05:00
Dan Halbert 013c840862 working on all ports 2019-12-10 20:27:30 -05:00
Dan Halbert 60f399395a Add POWER_SWITCH pin to CPB 2019-12-09 18:30:24 -05:00
Dan Halbert 40434d6919 wip 2019-12-05 22:45:53 -05:00
Joe Bakalor ba83a4a2ac
Merge pull request #1 from adafruit/master
Update base
2019-11-05 11:06:18 -05:00
JoeBakalor 8ab3ef44dd add bluebird template files 2019-11-05 10:52:25 -05:00
Dan Halbert 8cd2f87e99
Merge pull request #2236 from tannewt/bleio_tweaks
Refine _bleio
2019-11-04 22:27:54 -05:00
Dan Halbert e3638ffaad
Merge pull request #2262 from jepler/cpb-speaker-disable
cpb: Disable the onboard speaker until request
2019-11-03 18:34:29 -05:00
Dan Halbert 85a648224f Check for no pullups on I2C on nrf; give arduino nano 33 ble two I2C devices 2019-11-02 22:47:03 -04:00
jepler 2bdccf03a7 cpb: define the SPEAKER_ENABLE_PIN
This allows the board to disable the onboard speaker until explicitly
enabled in user code.

Testing performed on a CPB:
 * Touching the AUDIO pin with a fingertip no longer generates noise/buzz
 * Generating a waveform with `simpleio.tone` produces no sound by default
 * When the board.SPEAKER_ENABLE is configured as a digital output and
   set True, `simpleio.tone` does produce sound

Note that while guides should include information about SPEAKER_ENABLE, it's
possible that some users who omitted it could view this as a breaking change.
They can fix it by simply adding code similar to

    speaker_enable = digitalio.DigitalInOut(board.SPEAKER_ENABLE)
    speaker_enable.direction = digitalio.Direction.OUTPUT
    speaker_enable.value = True

before using the internal speaker.

Closes: #2258
2019-11-01 16:26:03 -05:00
Scott Shawcroft 47e50e5659
Merge remote-tracking branch 'adafruit/master' into bleio_tweaks 2019-11-01 13:20:58 -07:00
Dan Halbert e35eb08f1d nrf: allocate two I2C on CPB 2019-10-28 21:08:53 -04:00
Dan Halbert 358920db0e Use MICROPY_PY_SYS_PLATFORM in mpconfigport.h only 2019-10-28 10:40:10 -04:00
Jeff Epler 1103490223
Merge pull request #2244 from dhalbert/itsybitsy_nrf52840_express
Initial Itsy nRF52840 defn
2019-10-27 16:46:28 -05:00
Dan Halbert ab6fd34828 add object types to rgb status objects;mark spi rgb objects as never_reset 2019-10-25 22:32:43 -04:00
Dan Halbert 7d04d9109e use bitbang SPI for DotStar; still need to fix hw SPI for dotstar 2019-10-25 15:37:27 -04:00
Dan Halbert cdeb0857a9 Initial Itsy nRF52840 defn 2019-10-25 11:15:34 -04:00
Scott Shawcroft ae30a1e5aa
Refine _bleio
This PR refines the _bleio API. It was originally motivated by
the addition of a new CircuitPython service that enables reading
and modifying files on the device. Moving the BLE lifecycle outside
of the VM motivated a number of changes to remove heap allocations
in some APIs.

It also motivated unifying connection initiation to the Adapter class
rather than the Central and Peripheral classes which have been removed.
Adapter now handles the GAP portion of BLE including advertising, which
has moved but is largely unchanged, and scanning, which has been enhanced
to return an iterator of filtered results.

Once a connection is created (either by us (aka Central) or a remote
device (aka Peripheral)) it is represented by a new Connection class.
This class knows the current connection state and can discover and
instantiate remote Services along with their Characteristics and
Descriptors.

Relates to #586
2019-10-21 18:57:03 -07:00
Dan Halbert 7b79ac3739 Parameterize linker script 2019-10-20 23:50:12 -04:00
Dan Halbert fc19e03128 WIP: bonding 2019-10-06 21:30:26 -04:00
Dan Halbert aa1eed3bd3 initial Arduino Nano 33 BLE board definition 2019-09-26 15:28:57 -04:00
Dan Halbert 3c22c690c8 CPB A1 pin mapping wrong; remove A7 2019-09-06 14:17:11 -04:00
Dan Halbert 0b7291d767 fix default crystal value; fix include order 2019-08-22 09:01:05 -04:00
Dan Halbert acc6df4959 merge similar fix in 2019-08-22 01:29:34 -04:00
Dan Halbert d94023e9b3 Fix CPBlue LFCLKSRC; CPB has no status neopixel 2019-08-22 01:04:00 -04:00
Scott Shawcroft 85d7398476
Merge pull request #2066 from dhalbert/ble-pairing
BLE: more features
2019-08-16 14:50:00 -07:00
Dan Halbert 5877bd6036 CPblue initial definition 2019-08-13 22:12:36 -04:00
Dan Halbert 243334da75 Merge remote-tracking branch 'adafruit/master' into ble-pairing 2019-08-05 23:06:24 -04:00
Dan Halbert c56566179a Metro nRF52840 rev A defn; also remove '#define FEATHER52840' from mpconfigboard.h files 2019-08-05 18:10:27 -04:00
Dan Halbert 28ca05ccdc allow discovery from central or peripheral 2019-07-27 13:22:15 -04:00
Scott Shawcroft a98bfa628e
Merge pull request #2002 from ntavish/blip_improvements
Blip improvements
2019-07-19 10:52:08 -07:00
Tavish Naruka 724ce4acba enable libraries needed by BlipBoy Shield 2019-07-19 18:48:08 +05:30
Scott Shawcroft 6fad383367
Merge pull request #1925 from C47D/rgb_status
Initial support for RGB led as Status indicator, fixes #1382
2019-07-09 10:31:34 -07:00
Scott Shawcroft 5610e05b8c
Fix up nrf so that it is initialized properly. Also, do not reset
it's pins.
2019-07-06 12:48:16 -07:00
Tavish Naruka 4a7122d354 boards: add support for Electronut labs Blip
Signed-off-by: Tavish Naruka <tavishnaruka@gmail.com>
2019-06-05 00:49:29 +05:30
Dan Halbert c0ce820974
Merge pull request #1803 from nickzoic/circuitpython-nickzoic-1042-nrf-nvm-bytearray-3
Circuitpython nickzoic 1042 nrf nvm bytearray 3
2019-04-16 15:05:18 -04:00
Tavish Naruka 32a0855d18 Add support for Electronut Labs Papyr.
Signed-off-by: Tavish Naruka <tavishnaruka@gmail.com>
2019-04-16 12:59:42 +05:30
Nick Moore 02dd32da60 Make some space for NVM adafruit/circuitpython#1042 2019-04-16 14:53:44 +10:00
Nick Moore d0e5af3b09 Working flash pages for nvm.ByteArray adafruit/circuitpython#1042
import microcontroller

def dump(n = microcontroller.nvm):
    for i in range(0,len(n)):
        print ("%02X " % n[i], end="")
        if i % 16 == 15: print('')

microcontroller.nvm[0:4096] = bytes([1,2,3,4,5,6,7,8]) * 512
microcontroller.nvm[4096:8192] = bytes([16,17,18,19]) * 1024
microcontroller.nvm[4090:4101] = b'thisisatest'
microcontroller.nvm[100:105] = b'hello'
microcontroller.nvm[8000:8007] = b'goodbye'
dump()
2019-04-16 14:53:44 +10:00
Nick Moore 933500c448 nvm.ByteArray reads & writes but no sensible erase yet adafruit/circuitpython#1042 2019-04-16 14:53:44 +10:00
Nick Moore df89156f2f Start on nRF nvm.ByteArray adafruit/circuitpython#1042 (doesn't do anything yet) 2019-04-16 14:53:44 +10:00
Scott Shawcroft 254d0a53ac
Revert "nrf nvm: touchups to nickzoic PR #1768" 2019-04-15 18:50:33 -07:00
Dan Halbert 3618461f9b Merge remote-tracking branch 'adafruit/master' into circuitpython-nickzoic-1042-nrf-nvm-bytearray-2 2019-04-10 14:09:26 -04:00
Nick Moore fdaff00c78 Make some space for NVM adafruit/circuitpython#1042 2019-04-09 10:56:53 +10:00
Nick Moore 8e7fee2246 Working flash pages for nvm.ByteArray adafruit/circuitpython#1042
import microcontroller

def dump(n = microcontroller.nvm):
    for i in range(0,len(n)):
        print ("%02X " % n[i], end="")
        if i % 16 == 15: print('')

microcontroller.nvm[0:4096] = bytes([1,2,3,4,5,6,7,8]) * 512
microcontroller.nvm[4096:8192] = bytes([16,17,18,19]) * 1024
microcontroller.nvm[4090:4101] = b'thisisatest'
microcontroller.nvm[100:105] = b'hello'
microcontroller.nvm[8000:8007] = b'goodbye'
dump()
2019-04-09 10:55:39 +10:00
Nick Moore 492431a694 nvm.ByteArray reads & writes but no sensible erase yet adafruit/circuitpython#1042 2019-04-09 10:54:11 +10:00
Nick Moore f8e5e2da64 Start on nRF nvm.ByteArray adafruit/circuitpython#1042 (doesn't do anything yet) 2019-04-09 10:54:11 +10:00
Scott Shawcroft 0f003ac5b8
Reorganize board busses into shared-bindings and shared-module. 2019-04-08 16:58:50 -07:00
Dan Halbert fe555a4098 Allow NFC pins to be used for other purposes. 2019-03-21 11:22:58 -04:00
Jerry Needell bd13834a74 implement default busses for particle boards 2019-02-24 09:34:33 -05:00
Dan Halbert 9c24c804fb Fix #ifdefs in port.c to call xxx_reset() rroutines properly. Remove most uses of EXPRESS_BOARD. 2019-02-18 22:44:31 -05:00
Dan Halbert 7b3f7605b8 address @tannewt changes: move and rename common files; remove PORT_HEAP_SIZE 2019-02-15 20:32:32 -05:00
Dan Halbert a345ef28f2 finish Makefile refactoring; nrf builds work 2019-02-15 18:55:10 -05:00
Scott Shawcroft 6404aaf411
Fix up nrf and using board.SPI in FourWire 2019-01-17 18:19:07 -08:00
Scott Shawcroft 760bd8d8a4
share fourwire and make nrf compile 2019-01-17 15:15:59 -08:00
Scott Shawcroft c1e6624f8f
Merge pull request #1470 from gpshead/mdk_usb_dongle
Add Makerdiary nRF52840 MDK USB dongle support.
2019-01-15 23:05:15 -08:00
dsiee af0f1a7542
Update pins.c
whitespace
2019-01-16 15:02:48 +11:00
dsiee c2d39a7ab7
Update pins.c 2019-01-16 14:58:16 +11:00
dsiee ac238838f2
Update pins.c
add declaration for RED_LED as D3 to match silkscreen.
2019-01-16 14:48:41 +11:00
Gregory P. Smith 7296b647ef Add MDK nRF52840 MDK USB Dongle support.
Adds support for https://wiki.makerdiary.com/nrf52840-mdk-usb-dongle/.

A cheap nRF52840 USB stick with optional headers, very Trinket and Itsy like.
2019-01-15 01:37:22 -08:00
Dan Halbert b6b5ed9c89 Remove nRF52832 support 2018-12-30 22:49:20 -05:00
Jerry Needell 55084b30ef remome FRAMEBUF from nrf builds - use QSPI for particle ARGON 2018-12-27 09:38:35 -05:00
Scott Shawcroft 8fc72e8978
Add SPI and I2C to SparkFun nRF52840 mini definition and add it to Travis. 2018-12-10 20:32:19 -08:00