Lucian Copeland
bce541dcc5
Minor text fixes
2021-05-18 15:16:25 -04:00
lady ada
fdbd3bc8c2
add missing AREF pin
2021-05-18 11:09:31 -04:00
ladyada
cec9015e19
iz makropad with oled
2021-05-18 11:09:03 -04:00
Kamil Tomaszewski
da248d1594
spresense: Fix USB CDC and MSC
2021-05-18 17:02:16 +02:00
root
9393467819
Update comment for spelling
2021-05-17 22:13:00 -05:00
Lucian Copeland
633d83cc3e
Merge remote-tracking branch 'upstream/main' into sleep-revamp
2021-05-17 18:57:10 -04:00
root
ff4b1b28d2
iFormatting fixes
2021-05-17 16:43:55 -05:00
root
11ef36d09d
Implement pulseout for RP2040
2021-05-17 16:24:45 -05:00
EmergReanimator
2b64b1d335
[ resolves #4771 ] DEBUG UART supported on ATMSAME5x
2021-05-17 21:22:24 +02:00
Limor "Ladyada" Fried
9752162508
Merge pull request #4765 from dhalbert/rotary-trinkey-rev-c-pins
...
Update various Trinkey pins and add _pixelbuf
2021-05-15 11:52:33 -04:00
Dan Halbert
ea0e18d2e0
fix logic for suppressing ja and ko clean builds when not necessary
2021-05-14 23:41:44 -04:00
Dan Halbert
1e2a945782
Make busio.SPI be NotImplementedError on proxlight to save space
2021-05-14 21:52:54 -04:00
Scott Shawcroft
5c33c9d597
Fix SAMD
...
RTC needed to wait for sync. NeoPixel on SAMD doesn't need disabled
caches. It just needed timing adjustment for 120mhz clock speed.
2021-05-14 16:14:24 -07:00
Dan Halbert
990e58902d
add CIRCUITPY_PIXELBUF to all trinkeys; add NeoPixel to prox
2021-05-14 17:09:15 -04:00
Dan Halbert
6a2ba83e30
Update Rotary Trinkey and Slide Trinkey pins
2021-05-14 15:40:29 -04:00
Lucian Copeland
715f7ee490
Add STM32 and NRF52 compatibility
2021-05-14 14:34:35 -04:00
Scott Shawcroft
689ec86225
Merge pull request #4754 from dhalbert/fix-endpoint-checking
...
Fix endpoint checking; Clean up safe mode printing
2021-05-14 11:25:01 -07:00
Jeff Epler
c931e5deb7
Add build_memory_info for esp32s2
...
This detects an overflowed flash partition, such as
```
1452105 bytes used, -10313 bytes free in flash firmware space out of 1441792 bytes (1408.0kB).
444428 bytes used, 1652724 bytes free in ram for stack and heap out of 2097152 bytes (2048.0kB).
```
on a metro esp32-s2 built with debugging.
2021-05-14 10:39:07 -05:00
Dan Halbert
c65986f526
shrink a bit more
2021-05-14 09:18:14 -04:00
Dan Halbert
0fcb11b7b2
shrink some STM32F4 builds: turn MIDI back off
2021-05-13 23:14:12 -04:00
Dan Halbert
fa6c06fb38
count in/out endpoints; allow more usb modules on low-endpoint boards
2021-05-13 21:59:02 -04:00
Scott Shawcroft
1a0b4193b7
Simplify the status LED to save power
...
This also removes the need to pin share because we don't use the
status LED while user code is running.
The status flashes fallback to the HW_STATUS LED if no RGB LED is
present. Each status has a unique blink pattern as well.
One caveat is the REPL state. In order to not pin share, we set the
RGB color once. PWM and single color will be shutoff immediately but
DotStars and NeoPixels will hold the color until the user overrides
it.
Fixes #4133
2021-05-13 14:41:20 -07:00
Lucian Copeland
295103bb31
Merge remote-tracking branch 'upstream/main' into sleep-revamp
2021-05-13 16:22:12 -04:00
Scott Shawcroft
35ee4add63
Merge pull request #4388 from hierophect/stm-alarm
...
STM32: Alarms and sleep
2021-05-13 10:27:51 -07:00
Lucian Copeland
849e3a7319
Style fixes, submodules
2021-05-13 11:24:27 -04:00
Jeff Epler
47947dc23c
Merge pull request #4749 from tannewt/merge_1.15
...
Merge in MicroPython 1.15
2021-05-12 20:52:11 -05:00
Scott Shawcroft
966d25c6a5
Merge MicroPython v1.15 into CircuitPython
2021-05-12 17:51:42 -07:00
lady ada
502b66eac0
moar trinkz
2021-05-11 22:03:05 -04:00
Scott Shawcroft
a70fc0caee
Merge pull request #4744 from tannewt/merge_1.14
...
Merge MicroPython 1.14
2021-05-11 16:11:58 -07:00
Scott Shawcroft
e02a26453c
Merge MicroPython 1.14 into CircuitPython
2021-05-11 15:07:40 -07:00
Dan Halbert
0eb4b9b982
Merge pull request #4742 from kattni/led
...
Add LED pin to Adafruit boards.
2021-05-10 21:12:02 -04:00
Lucian Copeland
525b34b042
Fix formatting and broken links
...
Implmements missed pre-commit changes for all files, and fixes links broken by
cleanup in #4698
2021-05-10 18:04:43 -04:00
Lucian Copeland
0d3c5222d8
Merge remote-tracking branch 'upstream/main' into stm-alarm
2021-05-10 17:30:33 -04:00
Kattni Rembor
294ef59f27
Add LED pin to Adafruit boards.
2021-05-10 16:39:01 -04:00
Scott Shawcroft
4eb4f14840
Merge pull request #4734 from dhalbert/dynamic-usb-fixes
...
fix HID; fix interface name table creation
2021-05-10 12:55:29 -07:00
Kattni
054317d47d
Merge pull request #4735 from bleything/bhb-unreserve-pa00-pa01
...
free up PA00 and PA01 on BHB
2021-05-10 12:38:02 -04:00
Neradoc
dcfb7949d7
fix FunHome to FunHouse
...
FunHouse, sweet FunHouse.
2021-05-10 05:34:03 +02:00
Ben Bleything
44f162bb64
free up PA00 and PA01 on BHB
2021-05-09 10:19:48 -07:00
Dan Halbert
becff6f93d
restore pulseio to pirkey
2021-05-09 11:33:35 -04:00
nm3210
a3de9bda5f
Swap mis-labelled D0/D1 pins on SparkFun Pro Micro RP2040
2021-05-08 21:35:37 -04:00
Jeff Epler
5e06c91244
Merge pull request #4716 from tyomitch/main
...
s/Circuit Python/CircuitPython/g
2021-05-08 08:47:29 -05:00
Jeff Epler
446169e078
Merge pull request #4720 from tannewt/merge_1.13
...
Merge in MicroPython 1.13
2021-05-08 08:46:03 -05:00
Lucian Copeland
9920741c2f
Merge remote-tracking branch 'upstream/main' into stm-espr-pico-fix
2021-05-06 17:43:38 -04:00
Scott Shawcroft
42f4065c8a
Merge remote-tracking branch 'adafruit/main' into merge_1.13
2021-05-06 11:17:53 -07:00
Lucian Copeland
80a459d1f8
Remove settings for DNP oscillator
2021-05-06 13:52:07 -04:00
Dan Halbert
ebf9dcb47a
Merge pull request #4689 from dhalbert/dynamic-usb-descriptors
...
Dynamic USB descriptors
2021-05-06 13:51:38 -04:00
Artyom Skrobov
908d83d1f2
s/Circuit Python/CircuitPython/g
...
Some comments and messages used the non-standard spelling
2021-05-06 16:22:35 +03:00
Scott Shawcroft
59c2787702
Fix esp32s2 build
2021-05-05 18:27:21 -07:00
Scott Shawcroft
3fda0c0a1b
Fix board builds and use MP_ERROR_TEXT in py and extmod
2021-05-05 17:51:52 -07:00
Dan Halbert
843598ec3a
fix more board builds
2021-05-05 18:44:27 -04:00
Dan Halbert
579cdf30f1
fix more build errors
2021-05-05 16:49:29 -04:00
Dan Halbert
c37f021791
regularize and shrink many builds
2021-05-05 12:35:41 -04:00
Dan Halbert
fc8e1c4c2e
address review comments
2021-05-05 12:35:12 -04:00
Jeff Epler
4054860ff3
Name the variant like micropython does
2021-05-05 11:00:39 -05:00
Jeff Epler
607148bb85
Add frzqstr to coverage build
...
This fixes a fail in extra_coverage.py.
2021-05-05 11:00:39 -05:00
Scott Shawcroft
30c7aa8fc9
Merge pull request #4650 from anecdata/ap
...
wifi.radio Access Point modes
2021-05-05 08:47:55 -07:00
Scott Shawcroft
f0bb26d70f
Merge MicroPython 1.13 into CircuitPython
2021-05-04 18:06:33 -07:00
Dan Halbert
adc3d7d55e
update Python API according to review comments
2021-05-03 22:29:02 -04:00
Dan Halbert
d2b558993e
merge from main, including MicroPython 1.12 merge
2021-05-03 20:56:04 -04:00
Scott Shawcroft
b35fa44c8a
Merge MicroPython 1.12 into CircuitPython
2021-05-03 14:01:18 -07:00
Scott Shawcroft
25ccd5d8f1
Merge pull request #4679 from t-ikegami/wio_add_pin_assign
...
Add DAC* and RTL_* pin assignments to Wio Terminal board.
2021-05-03 11:08:28 -07:00
Scott Shawcroft
678279720f
Merge pull request #4702 from rsbohn/patch-1
...
esp32-s2: Don't set PWMOut frequency to 0
2021-05-03 11:01:59 -07:00
Randall Bohn
d1db782760
Move validation code to the right spot.
...
As MicroDev1 pointed out the problem is a divide by zero when calculating the duty cycle.
Maybe need to check again in `common_hal_pwmio_pwmout_set_frequency()`.
2021-05-03 09:16:46 -06:00
Randall Bohn
8613b9a9fe
Trim Trailing Whitespace
...
was causing pre-commit checks to fail
2021-05-03 07:41:52 -06:00
Dan Halbert
94ed5e0048
Merge pull request #4696 from dhalbert/no-pulseio-on-small-boards
...
Include pulseio only on CIRCUITPY_FULL_BUILD
2021-05-03 09:35:29 -04:00
Dan Halbert
9ca0e689a5
Merge branch 'main' into wio_add_pin_assign
2021-05-03 09:33:18 -04:00
Dan Halbert
8b8968101d
Merge pull request #4691 from nm3210/sparkfunthingplusrp2040_boardupdate
...
Update Sparkfun Thing Plus RP2040 pins to match board breakouts
2021-05-03 09:27:19 -04:00
Randall Bohn
2db113f191
esp32-s2: Don't set PWMOut frequency to 0
...
FeatherS2 crashes if you set the PWMOut frequency to 0.
This change will raise `ValueError: Invalid PWM frequency` if the requested frequency is 0.
(Lifted from the atmel-samd port)
2021-05-03 07:15:39 -06:00
Dan Halbert
e475dc8899
Fix broken builds
2021-05-03 00:09:15 -04:00
Dan Halbert
749a3ac978
remove pwmio from litex port
2021-05-01 23:22:52 -04:00
Dan Halbert
ebedeeb51d
Merge pull request #4695 from dhalbert/magtag-spi-naming
...
MagTag: Remove board.SPI(); rename display-only pins
2021-05-01 09:44:42 -04:00
Dan Halbert
07dab34294
re-enable for pirkey
2021-05-01 09:32:13 -04:00
Dan Halbert
670c49ed94
MagTag: Remove board.SPI(); rename display-only pins
2021-04-30 22:58:51 -04:00
Jeff Epler
1a52cbcf5d
Format a straggler file
2021-04-30 16:42:25 -05:00
Jeff Epler
da19e8e2d7
Merge remote-tracking branch 'origin/main' into fix-codeformat-subdirs
2021-04-30 15:31:08 -05:00
Jeff Epler
dfa7c3d32d
codeformat: Fix handling of **
...
After discussing with danh, I noticed that `a/**/b` would not match `a/b`.
After correcting this and re-running "pre-commit run --all", additional
files were reindented, including the codeformat script itself.
2021-04-30 15:30:13 -05:00
nm3210
929ee8d3b4
Fix pre-commit whitespace error
2021-04-30 14:16:13 -04:00
Scott Shawcroft
d93a9a1dbc
Merge pull request #4683 from DavePutz/issue_4661
...
Issue #4661 - Wrap pulsein values when maxlen is exceeded.
2021-04-30 11:07:54 -07:00
microDev
eebcd2eeaf
remove unsupported authmodes
2021-04-30 22:11:32 +05:30
microDev
6640db9555
make authmode settable
2021-04-30 21:35:02 +05:30
Jeff Epler
e95e921ca1
codeformat: Fix filename matching
...
In #4683 , tannewt noticed that uncrustify was not running on some
file in common-hal.
I investigated and found that it was not being run on a bunch of paths.
Rather than make incremental changes, I rewrote list_files to work
bsaed on regular expressions; these regular expressions are created from
the same git-style glob patterns.
I spot-checked some specific filenames after this change, and all looks good:
```
$ python3 tools/codeformat.py -v --dry-run tests/basics/int_small.py ports/raspberrypi/common-hal/pulseio/PulseIn.c extmod/virtpin.c tests/thread/thread_exit1.py ports/raspberrypi/background.h extmod/re1.5/recursiveloop.c
tools/codeformat.py -v --dry-run tests/basics/int_small.py ports/raspberrypi/common-hal/pulseio/PulseIn.c extmod/virtpin.c tests/thread/thread_exit1.py ports/raspberrypi/background.h extmod/re1.5/recursiveloop.c
uncrustify -c /home/jepler/src/circuitpython/tools/uncrustify.cfg -lC --no-backup extmod/virtpin.c ports/raspberrypi/background.h ports/raspberrypi/common-hal/pulseio/PulseIn.c
black --fast --line-length=99 -v tests/thread/thread_exit1.py
```
recursiveloop and int_small are excluded, while PulseIn, virtpin,
and background are included.
Testing running from a subdirectory (not _specifically_ supported though):
```
(cd ports && python3 ../tools/codeformat.py -v --dry-run raspberrypi/common-hal/pulseio/PulseIn.c ../extmod/virtpin.c)
../tools/codeformat.py -v --dry-run raspberrypi/common-hal/pulseio/PulseIn.c ../extmod/virtpin.c
uncrustify -c /home/jepler/src/circuitpython/tools/uncrustify.cfg -lC --no-backup ../extmod/virtpin.c raspberrypi/common-hal/pulseio/PulseIn.
```
As a side-effect, a bunch more files are re-formatted now. :-P
2021-04-30 10:48:08 -05:00
Dan Halbert
353e55d710
Merge pull request #4688 from jepler/fix-pixelbuf-subscr
...
objtype: Restore our customized behavior of instance_subscr
2021-04-30 10:45:44 -04:00
Dan Halbert
be7b2b00a8
uncrustify with newer version of uncrustify
2021-04-30 10:40:12 -04:00
nm3210
9c1466a330
Update Sparkfun Thing Plus RP2040 pins to match board
...
This fixes some missing and incorrectly-assigned pins for the SparkFun Thing Plus RP2040 protoboard so that they actually match what the board says. This also changes the default SPI pins from the SD card pins to the breakout pins on the side of the board.
2021-04-30 09:37:37 -04:00
microDev
7c845818b3
Merge branch 'main' into ap
2021-04-30 17:11:22 +05:30
Tsutomu IKEGAMI
11a9372da3
Set Xtal, Aref, and NC pins to be IGNORE_ed in microcontroller.pin for Wio Terminal.
2021-04-30 13:06:09 +09:00
Tsutomu IKEGAMI
d79d6ba688
Add I2S_* pin assignments to Wio Terminal board.
2021-04-30 13:03:29 +09:00
Mark
5ef9b10669
Merge pull request #4685 from microDev1/authmode
...
Add AuthMode class
2021-04-29 22:12:58 -05:00
Dan Halbert
b5efce12cd
delete hid .py; undo some debugging changes
2021-04-29 23:05:31 -04:00
Mark
5679eb4fd7
Merge pull request #4677 from skerr92/add-cp-sapling-rev-b
...
Add cp sapling rev b
2021-04-29 19:22:49 -05:00
Seth Kerr
8b611d4b6b
changing mpconfigboard makefile
2021-04-29 16:45:08 -06:00
Lucian Copeland
07b86fcb76
fix sleepmemory object redefine error
2021-04-29 17:28:06 -04:00
Jeff Epler
90bdb25219
ignore some pins to reclaim flash space
2021-04-29 14:36:29 -05:00
Jeff Epler
6498684f5e
ignore some pins to reclaim flash space
2021-04-29 14:30:31 -05:00
Lucian Copeland
bab5a22f0c
Fix build issues
...
H7 compatibility problems in port.c and peripherals/exti
NRF build failures due to new use of const for PinAlarm pin objects
Isolated board flash overage on blackpill_with_flash, remove audio modules
2021-04-29 14:48:16 -04:00
Kattni Rembor
4d97680cae
Fix board definition.
2021-04-29 13:45:39 -04:00
DavePutz
1ec59cd534
Fix up indentation
2021-04-29 12:38:13 -05:00
Kattni Rembor
0bf747870a
Fixing board definition.
2021-04-29 12:41:23 -04:00
microDev
1b972c51c3
add authmode class
2021-04-29 18:42:36 +05:30
Dan Halbert
f06d54524d
merge from adafruit
2021-04-28 23:48:26 -04:00
