94ecf33a5c
Merge pull request #3281 from dhalbert/fix-spim3-buffer-location
...
SPIM3 buffer must be in first 64kB of RAM
2020-08-17 19:28:03 -04:00
377503e61c
Merge pull request #3284 from dhalbert/fix-3171-evt-handler
...
Remove event handler before setting it to NULL
2020-08-17 15:02:29 -07:00
ef40f83f99
Remove event handler before setting it to NULL
2020-08-15 14:39:53 -04:00
cf0f3d70b5
SPIM3 buffer must be in first 64kB of RAM
2020-08-15 10:31:56 -04:00
52990a332d
fix
2020-08-14 17:48:15 +08:00
e7da652711
able to change ble mac address
2020-08-13 16:54:29 +08:00
c1bcc25b88
nrf: _bleio: clean up timeout calculation
...
The timeout value is calculated by the common-hal layer now, so we don't
need to be quite so clever about calculating it here.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-19 21:56:39 +08:00
34f91f01c6
bleio: adapter: add advertising timeout and status
...
Add a field to allow specifying a timeout when initiating advertising.
As part of this, add a new property to determine if the device is still
advertising.
Additionally, have the `anonymous` property require a timeout, and set
the timeout to the maximum possible value if no timeout is specified.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-19 15:01:19 +08:00
cfe65742a3
_bleio: support anonymous advertising
...
Add a new parameter to the `start_advertising()` function to enable
anonymous advertising. This forces a call to `sd_ble_gap_privacy_set()`
with `privacy_mode` set to `BLE_GAP_PRIVACY_MODE_DEVICE_PRIVACY` and
`private_addr_type` set to
`BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE`.
With this, addresses will cycle at a predefined rate (currently once
every 15 minutes).
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-19 15:01:18 +08:00
b7836aeac6
address review comments
2020-05-04 19:51:08 -04:00
bae7a5e433
make translate again
2020-05-04 17:26:59 -04:00
d6c6f9f4f0
add PacketBuffer .incoming_ and .outgoing_packet_length
2020-05-04 15:59:45 -04:00
f3078511a6
further cleanup and bug fixing
2020-04-29 23:18:08 -04:00
3d62f87e29
back to '.packet_size' for compatiblity
2020-04-29 22:10:56 -04:00
84cee1ab8d
rename and improve PacketBuffer packet length property
2020-04-29 17:49:31 -04:00
755d404edf
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-04-27 16:45:10 -07:00
fbc8719fad
ringbuf tested
2020-04-21 22:40:12 -04:00
77cd93ac2d
merge from adafruit
2020-04-21 17:47:51 -04:00
38ec3bc574
further ringbuf cleanup
2020-04-21 17:38:20 -04:00
c04e6d6f52
nrf: bleio: parameterize softradio configuration
...
Allow for setting various softradio memory settings as part of a
board in order to support lower-memory configurations. If a
parameter is unspecified then the previously-defined value is used.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-21 12:29:59 +08:00
8fe512c7e9
Merge remote-tracking branch 'adafruit/master' into lower_power
2020-03-31 15:13:58 -07:00
8a5d3cd6c4
Add exception on small buffer and fix Connecion WRITE handling
2020-03-25 17:41:47 -07:00
3551b769a2
Fix connection handle tracking in PacketBuffer when a server.
2020-03-25 13:31:18 -07:00
6f60afe8c5
First try at lowering the power consumption
2020-03-13 11:12:30 -07:00
28c7a1e9c3
Fix crash after empty REPL session
...
We were trying to reset bluetooth when it was off and then trying
to raise an exception without the heap.
2020-02-24 16:11:17 -08:00
72a1bdab30
Add another error message for extended advertisements at the same
...
time as scan response. The SD can't do it.
2020-02-05 15:56:17 -08:00
4abd5f1f7b
increase max connections from 2 to 5
2020-01-31 14:58:23 -05:00
87f73e2729
track vm_used_ble better
2020-01-30 09:52:06 -05:00
85dc4089b9
address review comments
2020-01-14 17:23:16 -05:00
0367ba7495
fix some typos and leftovers
2020-01-13 18:29:34 -05:00
2a75196aa3
merge from adafruit/circuitpython
2020-01-13 18:15:32 -05:00
4ad004f24e
put bonding to-do flags into Connection objects instead of using a heap-allocated queue
2020-01-13 17:52:32 -05:00
9e7f8743c2
fix CCCD bonding store; avoid excessive bonding writes
2020-01-12 23:32:51 -05:00
346ce3b73b
wip: HID bonding works!
2020-01-10 23:55:45 -05:00
9c167af17a
wip; redid flash writing to be compatible with SD
2020-01-09 17:40:02 -05:00
7a94940c89
Replace magic number and add comment.
2020-01-08 11:01:43 -08:00
390337b9a5
wip; compiles
2020-01-05 23:33:42 -05:00
82fb761c0f
Add PacketBuffer and MTU negotiation support.
...
PacketBuffer facilitates packet oriented BLE protocols such as BLE
MIDI and the Apple Media Service.
This also adds PHY, MTU and connection event extension negotiation
to speed up data transfer when possible.
2020-01-03 17:29:54 -08:00
242d572470
wip
2020-01-03 10:24:07 -05:00
ae64a669dd
address review comments
2019-12-11 15:43:06 -05:00
68ae47907c
merge from upstream
2019-12-10 21:04:46 -05:00
f5e913101c
Merge pull request #2301 from tannewt/support_extended_advertising
...
Add support for extended (>31 byte) BLE advertisements.
2019-12-06 23:51:05 -05:00
da0ea979ff
Check connection validity after service discovery.
...
Fixes #2347
2019-12-06 16:03:14 -08:00
40434d6919
wip
2019-12-05 22:45:53 -05:00
17c8356b8c
Add connection interval and debugging
...
This also sets TinyUSB to master and to not include its submodules.
It also fixes an old displayio example comment and retries gattc
reads.
2019-12-04 14:39:02 -08:00
3fc58cee38
Merge remote-tracking branch 'adafruit/master' into support_extended_advertising
2019-11-26 13:12:43 -08:00
77b78d7fb9
Merge remote-tracking branch 'origin/master' into tick-refactor
2019-11-22 14:28:51 -06:00
743bc829ab
Clean up debug changes
2019-11-21 16:39:57 -08:00
e63796c7bc
Special exception message for when pairing prompt is ignored.
2019-11-21 16:32:42 -08:00
39f4046f70
Fix pairing when peripheral. Central untested.
2019-11-21 16:32:42 -08:00
Dan Halbert
Scott Shawcroft
Dan Halbert
Yihui Xiong
Sean Cross
Scott Shawcroft
Jeff Epler