56be8306cd
try adding a submodule?
2021-04-10 23:22:13 -04:00
137745e911
neokey trinkey friend
2021-04-10 23:04:48 -04:00
15764b4c24
Merge remote-tracking branch 'upstream/main' into nrf52-sleep
2021-04-09 13:48:45 -04:00
ebfe36c9aa
Merge pull request #4576 from felixerdy/main
...
Add senseBox MCU
2021-04-09 10:27:37 -07:00
11b9a5e605
Merge pull request #4577 from dglaude/patch-1
...
Respect product name: space between QT and Py
2021-04-09 13:10:19 -04:00
1b60c9d033
Merge pull request #4580 from jepler/incrementalencoder-refactor
...
IncrementalEncoder: factor out the quadrature state machine
2021-04-09 13:10:02 -04:00
61e33a5619
fix nrf ISR; make direction consistent across ports; save code size
2021-04-09 11:07:47 -04:00
ca6dda4d2b
reorder alias
2021-04-09 08:35:13 +02:00
4fb3139273
switch orders the flash memory is listed
2021-04-08 21:56:25 -06:00
c672b33770
add W25Q64JVxQ as a supported flash for stm32f411 black pill
2021-04-08 21:53:38 -06:00
fdc5bb41f4
D3 pin should be GPIO26
2021-04-08 19:11:27 -04:00
72055ff02b
Merge pull request #4578 from tannewt/packetbuffer_lengths
...
Improve PacketBuffer lengths and remove packet_size
2021-04-08 18:55:24 -04:00
d69ca4a8ae
nrf: switch to shared softencoder implementation
2021-04-08 16:36:10 -05:00
3aec1032f7
atmel-samd: switch to shared softencoder implementation
2021-04-08 16:32:36 -05:00
3ce0b512f8
rasberrypi: IncrementalEncoder: factor out state machine
2021-04-08 16:25:47 -05:00
e3b3f97fa6
Improve PacketBuffer packet lengths for remote service
2021-04-08 13:25:11 -07:00
5d6bef569d
Respect product name: space between QT and Py
...
https://www.adafruit.com/product/4900 say "Adafruit QT Py RP2040"
This is also matching other "QT Py" product.
2021-04-08 21:50:16 +02:00
e5cffa94e8
add aliases for TX and RX
2021-04-08 21:19:27 +02:00
0539b88a6b
Merge pull request #4561 from bd34n/bdmicro_vina_d51_update
...
boards/bdmicro_vina_d51: A few updates for flexibility and expansion.
2021-04-07 10:33:58 -07:00
8544249fc0
boards/bdmicro_vina_d51: Replace old rev with new rev and rename.
...
This update to the PR retains the earlier board rev (with a rename) so
that backward binary compatibility is not lost for the earlier board
revision. The primary name 'vina-d51' is retained for the latest
revision to make it easy for customers to select the proper UF2
download - because the name matches the commercial name.
Details:
Replace bdmicro_vina_d51 with bdmicro_vina_d51_pcb7 (revision 7 of
PCB) with boardfiles unmodified. Add _pcb7 to the workflow build.
Replace bdmicro_vina_d51 boardfile content with latest PCB updates
(revision 10 ov PCB). Add minimal comments in the board files to make
it clear which PCB revision is implemented. Update the USB PID to
reflect an updated board revision.
2021-04-07 09:11:30 -04:00
e6aaf9924f
Merge pull request #4570 from jepler/mimxrt-busdevice
...
mimxrt10xx: enable adafruit_bus_device in core
2021-04-06 20:15:23 -04:00
82479b6a2c
Merge pull request #4503 from hierophect/sleep-api-update
...
Sleep API changes and fix for main.c silent issue
2021-04-06 16:53:25 -04:00
6097afdaa5
Merge pull request #4559 from jepler/rp2-rotary-encoder-fixes
...
raspberrypi: Several rotary encoder fixes
2021-04-06 10:00:26 -07:00
1a2ce27b73
raspberrypi: Drop support for auto-reversing swapped encoder
2021-04-06 09:22:59 -05:00
1a163dd70d
mimxrt10xx: enable adafruit_bus_device in core
2021-04-06 09:19:41 -05:00
71eabe814c
Update StateMachine.c
2021-04-05 16:17:08 -07:00
bf58afdb2a
Merge pull request #4399 from tyomitch/patch-2
...
[stm] implementation of audiopwmio
2021-04-05 18:35:39 -04:00
3e558a89ac
boards/bdmicro_vina_d51: A few updates for flexibility and expansion.
...
ESP-01 header renamed to AUX, and expanded to 12 pins from 8
pins. Pins 1-8 still accommodate the ESP-01, with expansion to full
SERCOM 4-pad support to allow for SPI and I2C on that expansion port
with additional GPIO control.
Update pins.c with additional signals provided AUX_1-8, along with
UART, SPI, I2C name usage as aliases to appropriate AUX_1-8
signals. Additionally, add several alternate names specific to several
expansion modules - the ESP-01, and the ATW-01 using the WINC_1500
(SPI) w/interrupt and control needed for the WINC - with assignments
to module pin positions.
Re-work SERCOM assignments to accommodate the above from other parts
of the board, which required moving a SERCOM or two around in order to
accommodate the 4-pad sercom pin mapping on the AUX port.
Built and tested using latest from 'main':
Adafruit CircuitPython 6.2.0-rc.0-70-ga1562430f-dirty on 2021-04-05;
BDMICRO VINA-D51 with samd51n20
2021-04-05 10:44:52 -04:00
fc86475de5
IncrementalEncoder: support swapped pins
...
Closes : #4422
2021-04-04 13:49:50 -05:00
93d6ceedd9
IncrementalEncoder: Disconnect interrupt handler during deinit.
...
Closes : #4557
2021-04-04 13:49:41 -05:00
bcd90dd927
IncrementalEncoder: There are no out pins.
...
Closes #4556
2021-04-04 13:49:21 -05:00
ae80378c4e
Merge pull request #4545 from ElectronicCats/huntercat_nfc
...
HunterCat NFC
2021-04-04 14:21:49 -04:00
8b6ffba392
Update comment
2021-04-04 11:10:32 -05:00
27d8832868
Merge pull request #4512 from m-byte/main
...
Add Artisense RD00 board files
2021-04-03 18:40:59 -05:00
4ee781227f
[meowbit] change board.BUZZ type to PWMAudioOut,
...
as advised in #4257
2021-04-03 13:35:19 -04:00
43ba81ffa1
Add Artisense RD00 board files
2021-04-03 17:20:59 +02:00
53f3282e9c
change flash device
2021-04-02 14:42:38 -06:00
f8da94b8ba
removed o¡modules not availables
2021-04-02 14:40:27 -06:00
c1987b7311
init port hunter cat nfc!
2021-04-02 13:19:59 -06:00
1afd204828
Changed error message to display the generic term 'system firmware' instead of the Nordic specific term 'soft device'
2021-04-02 20:34:37 +02:00
3451c25a75
Merge pull request #4530 from jepler/mimxrt1011-pwmio
...
mimxrt1011: pwmio: Enable basic PWMOut functionality
2021-04-02 09:29:41 -05:00
da16e4dce1
Merge pull request #4534 from UnexpectedCircuitPython/main
...
Changed some pins for TinyS2
2021-04-01 21:05:46 -04:00
58835e5a5b
Two small PacketBuffer fixes
...
1. Allow for ctrl-c during a write.
2. Handle disconnects when acting as a client.
2021-04-01 14:16:35 -07:00
a9b4e04643
Changed some pins for TinyS2
2021-04-02 08:08:02 +11:00
3f3cb79b7d
Add pinmux info for 1021 and 1062 family MCUs
2021-04-01 15:59:57 -05:00
89fc0298ce
mimxrt1011: pwmout: Add prescaler, fix duty_cycle=65535
2021-04-01 13:04:06 -05:00
489163b74e
mimxrt1011: pwmio: Enable basic PWMOut functionality
...
After this change, the following program works for me on the MIMXRT1010-EVK:
```python
import pwmio
import board
p = pwmio.PWMOut(board.D13, frequency=1_000_000, variable_frequency=True)
p.duty_cycle = 32868
while True:
pass
```
Querying and varying the duty_cycle and frequency work as well.
The lowest frequency obtainable is about 2kHz; there is an additional
divider which would allow lower PWM frequencies (I think 1kHz is important
for servos?)
Something odd happens with very low duty cycles, such as
```python
>>> p.frequency = 2000
>>> p.duty_cycle = 2
```
instead of a symmetrical waveform, it's asymmetrical. With `duty_cycle=4`,
the effect disappears. The reason for this is probably hidden in the
datasheet, but could affect servos or other things that count pulse
widths.
2021-04-01 10:06:59 -05:00
be50732515
Fix SD_DET pin assignment of seeduino_wio_terminal.
2021-04-01 17:09:56 +09:00
d0ba75e6dc
Merge pull request #4522 from tannewt/ble_fixup
...
Fix central pairing and crash on clear
2021-03-31 21:24:19 -04:00
0752bbd5fd
Fix central pairing and crash on clear
...
The list_clear would crash if we tried to clear a NULL list. (It
can happen if we haven't tried to discover any services.)
2021-03-31 16:04:04 -07:00
0e915dc3fb
Merge pull request #4518 from jepler/fix-bogus-assertion
...
mimxrt10xx: Fix bogus assertion.
2021-03-31 15:53:42 -04:00
cce8b2be07
raspberypi: Allow mpconfigboard to override additional items
...
This allows more options to be overridden to 0 in an mpconfigboard.mk.
Improved:
* FRAMEBUFFERIO, FULL_BUILD, BITOPS, PWMIO, RGBMATRIX, OTARYIO, PULSEIO, WATCHDOG
Still problematic (pull requests welcome):
* RP2PIO & NEOPIXEL_WRITE, possibly only if a status neopixel is defined
* BITBANGIO, possibly only if BUSIO is enabled
* RTC
Incidentally, with RP2PIO & NEOPIXEL_WRITE, BITBANGIO, and RTC re-enabled I get
```
323956 bytes used, 720524 bytes free in flash firmware space out of 1044480 bytes (1020.0kB).
12072 bytes used, 250072 bytes free in ram for stack and heap out of 262144 bytes (256.0kB).
```
Closes #4515
2021-03-31 09:40:48 -05:00
cb29ad0846
mimxrt10xx: Fix bogus assertion.
...
.. as noted by @d-c-d
2021-03-31 09:21:08 -05:00
71eee45a37
mimxrt1011: UART: Add additional error checking
...
.. and make the 'invalid pin' messages standard.
Closes #4502
2021-03-30 10:17:48 -05:00
580456719c
Merge pull request #4508 from dhalbert/rp2040-calc-sda-hold-time
...
Calculate RP2040 SDA hold time
2021-03-29 15:09:30 -07:00
840373f5c2
Merge pull request #4495 from tyomitch/patch-1
...
[ure] to save space, disable debug dumps by default
2021-03-29 16:08:56 -04:00
8e0834d74c
Calculate RP2040 SDA hold time
2021-03-29 14:40:13 -04:00
00178ca5e0
Sleep API changes, redundancy fix
2021-03-27 14:14:57 -04:00
010232574e
Merge pull request #4468 from jepler/metro-m7-dup-pins
...
remove duplicate RX/TX pin lines
2021-03-27 12:49:33 -05:00
9ac8ea587a
Merge pull request #4499 from dhalbert/rp2040-lengthen-sda-tx-hold-time
...
Length RP2040 I2C SDA hold time
2021-03-26 20:21:52 -04:00
03340a3fcd
Incorporate https://github.com/adafruit/pico-sdk/pull/2
2021-03-26 18:55:45 -04:00
8056af8648
[synthio] add a simple MidiTrack implementation
2021-03-26 16:38:10 -04:00
d7dc3801ab
[ure] to save space, disable debug dumps by default
...
Has to stay enabled in unix port for the sake of tests/extmod/ure_debug.py
2021-03-26 13:24:20 -04:00
b40d072648
[stm] implementation of audiopwmio
...
Based on nrf PWMAudioOut by @jepler and stm PulseOut by @hierophect
Tested on a Meowbit
2021-03-26 13:18:01 -04:00
2bc61b4580
Parenthesize double-division for clarity
2021-03-26 11:01:22 -05:00
231cb1ffd9
mimxrt10xx: Use the proper "betweenTransferDelay" (et al) values
...
Set the betweenTransferDelay to the SCK low-time, to avoid long pauses
between bytes (transfers) while preventing the last SCK cycle in a byte
from being a runt pulse.
Compared to an earlier revision of this change, which just set the delays
all to zero, this doesn't break using an AirLift, which was sensitive
to the runt pulses (the simple loopback-wire test didn't detect the problem)
2021-03-26 10:54:13 -05:00
1d48054aea
mimxrt10xx: Factor out "transfer_common"
...
.. and set the "MasterPcsContinuous" flag, which removes some of the
gap between bytes of a single SPI transaction
2021-03-26 10:04:35 -05:00
ffb70a8737
Freeze ESP32SPI into mimxrt1011_evk
...
.. so that it is more conveniently like the metro m7 for my testing
2021-03-26 10:01:53 -05:00
9e110f120a
mimxrt10xx: busio: cap SPI baudrate at 30MHz per datasheet
2021-03-26 10:01:53 -05:00
155b61f027
Merge pull request #4378 from Gadgetoid/patch-remove-rp2040-i2c-bitbang
...
RP2040: Remove short-write bitbang from I2C
2021-03-25 21:01:02 -04:00
0b212e2243
Add non M4 audiomixer support
2021-03-25 17:30:40 -05:00
da4dceea15
Fix 16MB Winbond names
2021-03-25 11:37:08 -07:00
aec0ef3cbf
Switch devices.h to nvm.toml data
2021-03-25 09:57:18 -07:00
e9ceb9263e
Merge pull request #4474 from jepler/fix-spi-frequency
...
mimxrt: SPI: Set the TCR value returned by MasterBaudSetRate
2021-03-25 08:59:21 -07:00
f79d60b205
Use GCC @file to shorten linker command length
...
This hopefully fixes linking on Windows with cmd.exe
2021-03-24 15:03:33 -07:00
b440883fe5
mimxrt: SPI: Set the TCR value returned by MasterBaudSetRate
...
without this, the baud rate could be wrong; in my testing, it was
low by a factor of 2 when requesating baudrate=1_000_000 (1MHz).
When passing the baudrate in to LPSPI_MasterInit, the setting is made
automatically, but LPSPI_MAster_SetBaudRate just returns it via the
out-parameter tcrPrescaleValue.
2021-03-24 13:33:21 -05:00
5314fddca0
remove duplicate RX/TX pin lines
2021-03-23 16:04:23 -05:00
c81007afb0
Merge pull request #4446 from tannewt/rp2040_flash
...
Switch RP2040 flash settings to nvm.toml
2021-03-23 15:18:29 -04:00
cde659651b
add brown out detect level
2021-03-23 19:17:45 +01:00
278d53c512
Merge pull request #4465 from anecdata/udp_server
...
swap recvfrom_into() port byte-order
2021-03-23 13:48:39 -04:00
36edc4bb89
Improve Winbond naming and correct board settings
2021-03-23 09:06:48 -07:00
c106b432c5
swap recvfrom_into() port byte-order
2021-03-22 20:03:26 -05:00
7867632a81
Merge remote-tracking branch 'adafruit/main' into rp2040_flash
2021-03-22 15:29:43 -07:00
f200e6a21e
Fix doc build and address feedback
2021-03-22 15:24:27 -07:00
36ae69ab6f
qtpy is more of a button than a switch! add itsybitsy rev C files
2021-03-21 18:44:32 -04:00
ebd6011633
add USBBOOT switch, move RX pin, re-enable UART (tested)
2021-03-21 14:58:18 -04:00
4b42932188
Merge pull request #4449 from ladyada/main
...
adventure together with rotary trinkey
2021-03-20 13:37:31 -04:00
8884682cac
adventure together with rotary trinkey
2021-03-20 12:03:51 -04:00
4aea7f8f52
Add requirements-dev.txt for python deps
2021-03-19 15:22:23 -07:00
22906ac95e
Merge pull request #4442 from jepler/m7-reboot-bootloader
...
mimxrt1011: Fix reset-to-bootloader
2021-03-19 15:37:06 -05:00
3fcb6b278f
Merge pull request #4443 from jepler/evk-pins-dnp
...
imxrt1010_evk: Delete pins that are not connected
2021-03-19 15:36:36 -05:00
c0ec904c7a
Merge pull request #4441 from jepler/metro_m7_4mb
...
metro m7: another place to fix flash capacity
2021-03-19 12:42:35 -04:00
ee59c75f62
imxrt1010_evk: Delete pins that are not connected
...
There are DNP resistors on the MIMXRT1010-EVK board (see SCH-45852)
that lead to these pins on the arduino-style header not being connected
through. In theory someone could populate them, but as it the presence
of these names in the pins module caused problems when they didn't work
as expected.
Closes #3012
2021-03-19 11:29:32 -05:00
06743d91ed
mimxrt1011: Fix reset-to-bootloader
...
The definition of DBL_TAP_REG must match tinyuf2
2021-03-19 10:11:45 -05:00
d7a2ae9df7
fix stm compiler error
2021-03-19 11:04:46 -04:00
01a1cdf13a
update flash chip comment
2021-03-19 09:50:26 -05:00
1512ca520b
Fix PWMOut non-error handling and never reset
2021-03-19 09:57:21 -04:00
6abea8a4aa
another place to fix flash capacity
2021-03-19 08:41:28 -05:00
8293e1eedc
fix display rotation and position
2021-03-19 00:09:48 -04:00
47437cb415
make translate; fix display pins
2021-03-18 23:42:24 -04:00
ea82ca1d02
correct PID
2021-03-18 23:24:20 -04:00
21c55f8e75
update funhouse pins for latest rev b
2021-03-18 23:14:59 -04:00
b2d913412f
merge from upstream
2021-03-18 23:14:43 -04:00
5d2b60cbf6
Redo RP2040 flash settings
...
This switches stage2 to C and uses Jinja to change the C code based
on flash settings from https://github.com/adafruit/nvm.toml . It
produces the fastest settings for the given set of external flashes.
Flash size is no longer hard coded so switching flashes with similar
capabilities but different sizes should *just work*.
This PR also places "ITCM" code in RAM to save the XIP cache for
code execution. Further optimization is possible. A blink code.py
still requires a number of flash fetches every blink.
Fixes #4041
2021-03-18 16:55:42 -07:00
2589515342
Merge pull request #4435 from jepler/metro-m7
...
Fixes for Metro M7
2021-03-18 17:56:12 -05:00
0b22a9397a
mimxrt: Quiet some warnings down in the sdk
...
Closes #2487
2021-03-18 16:54:11 -05:00
0ba0fae495
mimxrt: Enable USB Midi
...
Closes #2473
2021-03-18 16:54:11 -05:00
74243fd71a
metro_m7: Update board name, flash chip size
2021-03-18 16:54:11 -05:00
11e510a06a
Merge pull request #4419 from spe2/main
...
Add board definition for Sparkfun Pro Micro RP2040
2021-03-17 18:17:24 -07:00
719e8710f2
Merge pull request #4411 from mintakka/thingplus-rp2040
...
added board configuration for Sparkfun ThingPlus RP2040
2021-03-17 16:23:55 -05:00
b8d4f9655f
RP2040: Only bitbang 0-byte writes
...
The I2C.c for RP2040 included a special case for writes <=2 bytes to match the MicroPython implementation,
however RP2040 does support 1 and 2 byte reads, with only 0 bytes being the exception.
Signed-off-by: Philip Howard <phil@pimoroni.com>
2021-03-17 16:25:54 +00:00
bfc8c89536
Merge pull request #4403 from jepler/bitmap-read-2
...
bitmaptools: Add readinto, arrayblit
2021-03-17 07:57:31 -05:00
337727ba0c
renamed board folder to match board name in boards.yml
2021-03-16 21:10:10 -04:00
94fa8e8a60
disable bitmaptools on small board
2021-03-16 19:04:21 -05:00
75ba26ee7c
Merge pull request #4421 from kattni/led-pin
...
Adding LED for D13/L pin name.
2021-03-16 18:58:14 -05:00
1be5ca7881
Merge pull request #4130 from gamblor21/rp_dp_parallel
...
Add RP2040 displayio.ParallelBus Support
2021-03-16 13:49:55 -05:00
dcd9a8ab91
Update ports/raspberrypi/boards/sparkfun_pro_micro_rp2040/mpconfigboard.mk
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-03-16 10:54:20 -07:00
5bc132a209
Update ports/raspberrypi/boards/sparkfun_pro_micro_rp2040/mpconfigboard.h
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-03-16 10:54:15 -07:00
b5333f2bdf
Update ports/raspberrypi/boards/sparkfun_thingplus_rp2040/mpconfigboard.h
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-03-16 13:47:33 -04:00
3d15877639
Update ports/raspberrypi/boards/sparkfun_thingplus_rp2040/mpconfigboard.mk
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-03-16 13:47:21 -04:00
58679dc038
Merge remote-tracking branch 'origin/main' into bitmap-read-2
2021-03-16 12:21:50 -05:00
2b910b7292
Adding LED for D13/L pin name.
2021-03-16 12:14:40 -04:00
bc690d4070
Merge pull request #4415 from jepler/pre-commit-no-run-if-empty
...
pre-commit: code formatter fixes
2021-03-16 09:54:12 -05:00
0890b54cd9
More formatting
2021-03-16 08:29:04 -05:00
fb437d8280
Formatting fixes
2021-03-16 08:22:02 -05:00
3b01a65743
Fixed formatting
2021-03-16 08:14:49 -05:00
9de40f56f3
Add board config files
2021-03-15 22:08:19 -06:00
c9427780b3
Create pins.c
2021-03-15 22:07:24 -06:00
49baa94446
added sparkfun_thingplus_rp2040 to .github/workflows/boards.yml and renamed board folder to include chip
2021-03-15 23:00:24 -04:00
288415f867
Update ports/raspberrypi/boards/sparkfun_thingplus/mpconfigboard.h
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-03-15 21:07:31 -04:00
30a74b3d92
Update ports/raspberrypi/boards/sparkfun_thingplus/mpconfigboard.mk
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-03-15 21:07:24 -04:00
e326d7ca80
Merge branch 'main' into rp_dp_parallel
2021-03-15 20:00:13 -05:00
f7a988b9b3
Merge pull request #4405 from DavePutz/issue_4237
...
Issue 4237 - Changed initial setting in program_struct
2021-03-15 17:51:36 -07:00
9cb8ce67ed
Merge pull request #4412 from kamtom480/spi_and_i2c
...
spresense: minor changes for i2c, spi and uart
2021-03-15 17:35:06 -07:00
d3bf1fe15d
modifications by pre-commit
2021-03-15 18:11:00 -05:00
ed3f636be5
spresense: empty rx uart fifo after initialization
2021-03-15 16:14:16 +01:00
22ed0abf6c
spresens: configure pin mode for i2c and spi
2021-03-15 16:14:16 +01:00
0567d06936
added board configuration for Sparkfun ThingPlus RP2040
2021-03-15 10:27:21 -04:00
a52eb88031
run code formatting script
2021-03-15 19:27:36 +05:30
6c32a1f67f
update pins of senseBox MCU
2021-03-15 10:27:50 +01:00
b33d77bfe8
disable bitmaptools on over-full board
2021-03-14 20:08:09 -05:00
9a83501982
Fixed initial settings for program_struct to allow more than 1 program per pio
2021-03-14 15:05:56 -05:00
8e425a9354
Merge pull request #4393 from tannewt/raise_default_flash_speed
...
Speed up a bit more
2021-03-13 12:50:29 -05:00
1b106de4e0
Merge pull request #4262 from DavePutz/issue_4111
...
Issue 4111 - Implement pulseio(pulsein) for RP2040
2021-03-12 16:48:57 -08:00
45487f14a0
Speed up a bit more
2021-03-12 16:00:16 -08:00
96ce43e6d6
Added the correct files
2021-03-12 16:18:33 -06:00
6628f49852
Use StateMachine.c interrupt setup and simplify SM program
2021-03-12 16:06:57 -06:00
a5c6759325
Merge pull request #4392 from tannewt/lower_default_flash_speed
...
Lower default flash speed.
2021-03-12 13:58:44 -06:00
aec03a409f
Lower default flash speed.
...
/ 6 leads to ~40mhz. 2M and 4M have a max 0x03 read speed of 60mhz.
If the divisor is / 4 then the speed is just over 60mhz.
Fixes #4377
2021-03-12 11:06:39 -08:00
2009aecac3
Merge branch 'main' of github.com:felixerdy/circuitpython
2021-03-12 17:59:44 +01:00
lady ada
Lucian Copeland
Scott Shawcroft
Dan Halbert
Dan Halbert
felixerdy
Kevin Lutzer
Jeff Epler
Scott Shawcroft
David Glaude
Brian Dean
sabas1080
Jeff Epler
Artyom Skrobov
Matthias Breithaupt
Jonny Bergdahl
Seon Rozenblum
Tsutomu IKEGAMI
Jeff Epler
gamblor21
anecdata
Phil Howard
mintakka
Mark
spe2
Kattni Rembor
Kamil Tomaszewski
microDev
root
DavePutz