mintakka
288415f867
Update ports/raspberrypi/boards/sparkfun_thingplus/mpconfigboard.h
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-03-15 21:07:31 -04:00
mintakka
30a74b3d92
Update ports/raspberrypi/boards/sparkfun_thingplus/mpconfigboard.mk
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-03-15 21:07:24 -04:00
Mark
e326d7ca80
Merge branch 'main' into rp_dp_parallel
2021-03-15 20:00:13 -05:00
Scott Shawcroft
f7a988b9b3
Merge pull request #4405 from DavePutz/issue_4237
...
Issue 4237 - Changed initial setting in program_struct
2021-03-15 17:51:36 -07:00
mintakka
0567d06936
added board configuration for Sparkfun ThingPlus RP2040
2021-03-15 10:27:21 -04:00
microDev
a52eb88031
run code formatting script
2021-03-15 19:27:36 +05:30
root
9a83501982
Fixed initial settings for program_struct to allow more than 1 program per pio
2021-03-14 15:05:56 -05:00
Dan Halbert
8e425a9354
Merge pull request #4393 from tannewt/raise_default_flash_speed
...
Speed up a bit more
2021-03-13 12:50:29 -05:00
Scott Shawcroft
1b106de4e0
Merge pull request #4262 from DavePutz/issue_4111
...
Issue 4111 - Implement pulseio(pulsein) for RP2040
2021-03-12 16:48:57 -08:00
Scott Shawcroft
45487f14a0
Speed up a bit more
2021-03-12 16:00:16 -08:00
DavePutz
96ce43e6d6
Added the correct files
2021-03-12 16:18:33 -06:00
DavePutz
6628f49852
Use StateMachine.c interrupt setup and simplify SM program
2021-03-12 16:06:57 -06:00
Scott Shawcroft
aec03a409f
Lower default flash speed.
...
/ 6 leads to ~40mhz. 2M and 4M have a max 0x03 read speed of 60mhz.
If the divisor is / 4 then the speed is just over 60mhz.
Fixes #4377
2021-03-12 11:06:39 -08:00
gamblor21
307d2a99fe
Fix after rebase
2021-03-11 20:06:50 -06:00
gamblor21
5689307798
Changed frequency to match PIO having 2 instructions
2021-03-11 19:32:44 -06:00
gamblor21
b02b1e9979
Set frequency default 60Mhz
2021-03-11 19:32:44 -06:00
gamblor21
1658fe04f9
Set the statemachine to never reset so REPL works
2021-03-11 19:32:44 -06:00
gamblor21
c384ebe5c0
Updated to initalize pindirs
2021-03-11 19:32:44 -06:00
gamblor21
56a219911f
Add frequency support to parallel bus
2021-03-11 19:32:43 -06:00
gamblor21
b080d6207b
Removing debug info and clean up
2021-03-11 19:32:43 -06:00
gamblor21
c6aaab6f64
Initial commit
2021-03-11 19:32:43 -06:00
Jeff Epler
24f4d981bd
Merge pull request #4380 from jepler/rp2040-audiomp3
...
raspberrypi: Enable mp3 playback
2021-03-11 12:53:46 -06:00
Jeff Epler
16bfe3b41c
raspberrypi: RTC: Ensure a time is set
...
Until a time is set, the RTC is not running, and rtc_get_datetime()
returns false without assigning to the out-parameter.
In CircuitPython, this would manifest as arbitrary values being returned,
since uninitialized storage on the stack was being converted into a timestamp.
2021-03-10 20:20:40 -06:00
Jeff Epler
c95def0b32
raspberrypi: Enable mp3 playback
...
The rp2040 is _very_ marginal for mp3 playback, and currently sometimes triggers a bug that gives garbled audio output. However, it does work for some limited situations.
2021-03-10 18:44:10 -06:00
hathach
58fb011070
clean up
2021-03-10 19:03:27 +07:00
hathach
d1c6bb0927
rp2040 add double reset to uf2, also update pico-sdk to 1.1.0
2021-03-10 18:58:23 +07:00
DavePutz
a3c3e8a0fa
fix trailing whitespace
2021-03-09 22:41:08 -06:00
DavePutz
0c58cc4772
Moved pin wait to an initial exec
2021-03-09 16:37:29 -06:00
DavePutz
f0e3274a33
Update to agree with modified StateMachine.h
2021-03-09 11:13:09 -06:00
DavePutz
6f4510d7aa
Merge branch 'main' into issue_4111
2021-03-08 23:28:21 -06:00
root
576da73a17
Added check for maxlen
2021-03-08 23:23:51 -06:00
root
95b7a59156
Merge branch 'issue_4111' of https://github.com/DavePutz/circuitpython into issue_4111
2021-03-08 23:22:05 -06:00
root
3db0fec267
Added check for maxlen
2021-03-08 23:20:57 -06:00
DavePutz
88650bc4d0
Removed leftover debug code
2021-03-08 22:48:57 -06:00
Jeff Epler
cd1f19020f
raspberrypi: move landmine Makefile comments
2021-03-05 12:59:55 -06:00
Jeff Epler
2ae1e7de61
WIPrp2040: Implement IncrementalEncoder
...
Any two consecutive pins can be used for an IncrementalEncoder
Testing performed: Put a synthesized (few hundred counts per second) quadrature signal into GP2/3 and read the encoder out. Performed filesystem operations at the same time to stress test it.
The reasons for not using common_hal_rp2pio_statemachine_readinto are commented on.
2021-03-05 10:31:29 -06:00
DavePutz
a4dda3a5ba
Merge branch 'main' into issue_4111
2021-03-04 14:38:00 -06:00
DavePutz
c5c297d2c0
Update PulseOut.c
2021-03-04 13:53:19 -06:00
DavePutz
b7f03f9487
Update PulseOut.h
2021-03-04 13:52:40 -06:00
DavePutz
2d941b070f
Changed interrupt to per-word basis; cleaned up other small items
2021-03-04 13:51:46 -06:00
Jeff Epler
bc14ed31f6
StateMachine.h: Add header for declaration of mcu_pin_obj_t typedef
2021-03-04 12:28:46 -06:00
Jeff Epler
c023ec03ff
PDMIn: Add missing deinit call
2021-03-04 12:28:06 -06:00
Jeff Epler
bd01d31542
rp2pio: Add pins_are_sequential
...
This can be used where the standard API calls for a list of pins, to check that they satisfy the requirements of the rp2pio state machine, e.g.,
```python
def __init__(self, pin_a, pin_b):
if not rp2pio.pins_are_sequential([pin_a, pin_b]):
raise ValueError("Pins must be sequential")
```
2021-03-04 11:26:33 -06:00
Jeff Epler
ff62b0d2c0
StateMachine: Add pull up/down for inputs
2021-03-04 11:26:29 -06:00
Jeff Epler
68ac14b309
StateMachine: Add in_available property
...
I named the property `in_available` because it is similar to pyserial.
However, it indicates the number of words in the fifo, not the number
of bytes.
2021-03-04 11:14:09 -06:00
hathach
6f99026a64
rp2040 use normal usb_irq_handler()
2021-03-04 21:29:04 +07:00
Dan Halbert
71c43ca2dd
Merge pull request #4319 from jepler/feather-default-uart
...
feather rp2040: enable default board.UART
2021-03-03 16:46:00 -05:00
Jeff Epler
b0fca4fcda
feather rp2040: enable default board.UART
2021-03-03 13:13:06 -06:00
Dan Halbert
cd48c5ee83
Merge pull request #4315 from dhalbert/rp2040-i2c-short-writes
...
RP2040: Implement short I2C writes (2 bytes or less) using bitbangio
2021-03-03 12:42:47 -05:00
DavePutz
88353f2f5b
Update mpconfigport.mk
2021-03-03 11:00:58 -06:00
DavePutz
ced707ed32
Update call to rp2pio_statemachine_construct
2021-03-03 10:55:08 -06:00
Scott Shawcroft
514b73bcf8
Merge pull request #4254 from gamblor21/rp2040_countio
...
Rp2040 countio
2021-03-03 08:47:24 -08:00
Scott Shawcroft
1d8933dd05
Merge pull request #4265 from DavePutz/pio_soft_reset
...
Clear out PIOs and State Machines on RP2040 soft reset
2021-03-03 08:43:57 -08:00
Dan Halbert
fb7a0f7efc
add 1sec timeouts for I2C read and write
2021-03-03 09:43:57 -05:00
gamblor21
98075c5255
Fixed merge
2021-03-02 22:32:59 -06:00
Dan Halbert
e3ab394cd6
works on nearly all sensors
2021-03-02 23:27:37 -05:00
Dan Halbert
4167778bbc
Merge pull request #4312 from jepler/feather-rp2040-led
...
feather rp2040: add board.LED
2021-03-02 23:19:14 -05:00
DavePutz
9b96bae668
Update mpconfigport.mk
2021-03-02 21:36:00 -06:00
DavePutz
30d491e136
Update mpconfigport.mk
2021-03-02 21:30:49 -06:00
DavePutz
58fb7b9b32
Update mpconfigport.mk to get builds working
2021-03-02 21:27:46 -06:00
DavePutz
6046d37f31
Update PulseIn.c
2021-03-02 21:23:45 -06:00
Mark
37ee18349f
Merge branch 'main' into rp2040_countio
2021-03-02 19:47:53 -06:00
gamblor21
4246cc3f6d
Counter and PWMOut slice conflict check
2021-03-02 19:32:06 -06:00
Jeff Epler
b27afad9cb
move LED to the right spot in the file
2021-03-02 19:02:38 -06:00
Jeff Epler
efc2667b5f
Merge pull request #4186 from jepler/update-protomatter-rp2
...
Enable protomatter on RP2040 builds
2021-03-02 19:01:37 -06:00
Dan Halbert
15615effc2
Merge pull request #4276 from bergdahl/patch-1
...
Update StateMachine.c
2021-03-02 17:11:45 -05:00
Dan Halbert
f31b472309
Merge remote-tracking branch 'adafruit/main' into rp2040-i2c-short-writes
2021-03-02 15:17:12 -05:00
Dan Halbert
9939c59caa
wip
2021-03-02 15:16:55 -05:00
Jeff Epler
8bfd308d37
feather rp2040: add board.LED
2021-03-02 13:16:09 -06:00
Scott Shawcroft
ce70b95990
Merge pull request #4177 from microDev1/nvm-rp
...
RP2040: Support for NVM
2021-03-02 09:57:36 -08:00
Dan Halbert
f41fb6fafc
Apply suggestions from code review
...
copyediting
2021-03-02 12:01:50 -05:00
Scott Shawcroft
2651e15a52
Merge pull request #4309 from jepler/rp2040-interrupt-pio
...
rp2pio: allow keyboard interrupt while waiting for tx fifo to empty (& stall)
2021-03-02 08:55:27 -08:00
Jeff Epler
f560b5f3a3
raspberry: switch pico back to the boot2 for W25Q16
...
Presumably, switching it to generic hurt performance a bit.
I verified that the build-raspberry_pi_pico/boot2_padded_checksummed.S
built file has the same checksum as the old
bs2_default_padded_checksummed.S
2021-03-02 08:08:41 -06:00
microDev
b029031286
minor structural modification
2021-03-02 14:36:28 +05:30
Jeff Epler
5a00862b1d
raspberrypi: allow directly specifying the original boot .S file
...
.. all the necessary steps to transform it into a padded, checksummed
file are now done by the build system.
Since it is assigned by "?=", it _should_ be the case that individual
builds can override it.
I did not "test" this per se, but it gives the same content and checksum
(except for the identifying comment with a path) as #4302 .
2021-03-01 21:08:19 -06:00
Jeff Epler
4b63a8c9b4
rp2pio: allow keyboard interrupt while waiting for tx fifo to empty (& stall)
2021-03-01 21:07:04 -06:00
Scott Shawcroft
21a8752166
Merge pull request #4297 from adafruit/tannewt-patch-1
...
Update flash sizes for Adafruit RP2040 boards
2021-03-01 13:19:50 -08:00
Jeff Epler
238484ec26
Merge remote-tracking branch 'origin/main' into update-protomatter-rp2
2021-03-01 15:18:32 -06:00
Scott Shawcroft
532e7db293
Merge pull request #4267 from dhalbert/rp2040-digitalinout-fixes
...
RP2040: change DigitalInOut direction only when necessary; strong drive strength
2021-03-01 13:14:13 -08:00
Scott Shawcroft
af9dfccab1
Update QT Py flash size
2021-03-01 10:34:25 -08:00
Scott Shawcroft
dac047db61
Update Feather RP2040 to 8MB
2021-03-01 10:33:04 -08:00
gamblor21
d7bc8a46a5
Added counters per slice
2021-02-27 15:17:27 -06:00
root
29c89a2487
Removed more includes
2021-02-26 22:35:38 -06:00
root
f3515502b7
Removed unecessary includes
2021-02-26 22:33:50 -06:00
root
6374408c06
Changed reset_rp2pio_statemachine to clean up any PIO interrupts.
2021-02-26 22:28:50 -06:00
Jonny Bergdahl
f7eac46c78
Update StateMachine.c
...
Changed woring to use max instead
2021-02-27 00:07:30 +01:00
Scott Shawcroft
776301c932
Typo fix: direcion -> direction
2021-02-26 15:03:56 -08:00
Scott Shawcroft
888a0c5f08
Merge pull request #4224 from microDev1/busio-uart-rp
...
RP2040: Support for UART
2021-02-26 14:57:23 -08:00
Dan Halbert
d9234ffa82
need to gpio_set_dir() at some point
2021-02-26 15:27:35 -05:00
root
7942932176
Requested changes
2021-02-26 14:14:55 -06:00
Scott Shawcroft
2e6e91dc5c
Merge pull request #4253 from tannewt/rp2040_fix_pwm_reuse
...
Fix second shared PWM
2021-02-26 11:53:54 -08:00
Scott Shawcroft
7c8d7d77dd
Merge remote-tracking branch 'adafruit/main' into busio-uart-rp
2021-02-26 09:04:42 -08:00
Limor "Ladyada" Fried
caedc3bba6
Merge pull request #4270 from tannewt/rp2040_feather_pinout
...
Update RP2040 Feather pinout for production rev
2021-02-26 11:11:44 -05:00
Jeff Epler
1d1ff5f308
Merge remote-tracking branch 'origin/main' into update-protomatter-rp2
2021-02-26 09:56:35 -06:00
Scott Shawcroft
3f08cb47b8
Merge remote-tracking branch 'adafruit/main' into busio-uart-rp
2021-02-25 16:59:15 -08:00
Scott Shawcroft
52bc935fa7
A few minor fixes for corner cases
...
* Always clear the peripheral interrupt so we don't hang when full
* Store the ringbuf in the object so it gets collected when we're alive
* Make UART objects have a finaliser so they are deinit when their
memory is freed
* Copy bytes into the ringbuf from the FIFO after we read to ensure
the interrupt is enabled ASAP
* Copy bytes into the ringbuf from the FIFO before measuring our
rx available because the interrupt is based on a threshold (not
> 0). For example, a single byte won't trigger an interrupt.
2021-02-25 16:50:57 -08:00
Scott Shawcroft
f0432b9d6f
Remove neopixel power
2021-02-25 16:37:34 -08:00
Dan Halbert
d0f1cfb039
address review; use gpio_set() carefully
2021-02-25 18:41:22 -05:00
Scott Shawcroft
2b163ccd6a
Fix incorrect deinit mask
2021-02-25 14:57:46 -08:00
Scott Shawcroft
1b00d94b23
Fix second shared PWM
...
Fixes #4210
2021-02-25 14:49:09 -08:00
Scott Shawcroft
80f7972f72
Update RP2040 Feather pinout for production rev
2021-02-25 14:46:08 -08:00
Jeff Epler
22276710e6
rp2pio: Fix writing where the stride was 2 or 4
...
The wrong stride value was being checked.
2021-02-25 15:50:49 -06:00
Dan Halbert
199a8ce8b0
change DigitalInOut direction only when necessary; strong drive strength
2021-02-25 14:10:19 -05:00
root
f8eb5bc275
Cleanup PIOs and State Machines on soft reset
2021-02-25 12:38:43 -06:00
microDev
8170e26a86
more uart improvements
...
- address suggested changes
- refine uart instance availibility checks
- improve pin validation and rx buffer handling
2021-02-25 23:46:00 +05:30
root
86e60f5f35
Clean up formatting
2021-02-24 17:26:35 -06:00
root
17ff5dcc99
Return NotImplementedError for PulseOut
2021-02-24 17:04:05 -06:00
root
8e15f36baa
pulseio (pulsein) for RP2040
2021-02-24 16:58:29 -06:00
microDev
5d7fdafcde
implement suggested changes
...
- add internal buffering
- rtc initialization fix
2021-02-25 00:48:36 +05:30
Mark
b935dcafdc
Merge branch 'main' into rp2040_countio
2021-02-23 19:46:41 -06:00
gamblor21
379f454ce6
Adding countio to rp2040
2021-02-23 19:38:05 -06:00
Scott Shawcroft
abbbb91fa8
Add state machine divisor check
...
This causes an exception when setting a state machine too slow or
too fast.
Fixes #4222
2021-02-23 16:30:46 -08:00
Scott Shawcroft
360475e266
Implement audiobusio and enhance PIO for it
...
This adds I2SOut and PDMIn support via PIO.
StateMachines can now:
* read and read while writing
* transfer in 1, 2 or 4 byte increments
* init pins based on expected defaults automatically
* be stopped and restarted
* rxfifo can be cleared and rxstalls detected (good for tracking when
the reading code isn't keeping up)
Fixes #4162
2021-02-23 15:50:00 -08:00
Scott Shawcroft
001d7299b2
Merge pull request #4228 from ZodiusInfuser/rp2040-boards
...
Added definitions for Pimoroni RP2040-based boards
2021-02-23 10:00:19 -08:00
ZodiusInfuser
1a0bf4c33f
Added flash size for PicoSystem
2021-02-23 11:04:20 +00:00
ZodiusInfuser
a9951c9b6c
Added flash size for Keybow2040
2021-02-23 11:01:40 +00:00
ZodiusInfuser
ca9b7debe0
Added flash size for Tiny2040
2021-02-23 10:43:35 +00:00
Scott Shawcroft
3fdf29e773
More parens
2021-02-22 18:35:09 -08:00
Scott Shawcroft
863981a5b8
Parens
2021-02-22 18:31:45 -08:00
Scott Shawcroft
0aafeac209
Board specific flash sizes for RP2040
...
Stop-gap solution for #4041 . Comment is there to provide info
needed in the future. (We currently run the generic "safe" settings.)
2021-02-22 17:19:18 -08:00
ZodiusInfuser
52f2fd6d53
Removed trailing white space
2021-02-20 17:25:26 +00:00
ZodiusInfuser
417173b752
Removed trailing white space
2021-02-20 17:24:26 +00:00
ZodiusInfuser
9a4b8c5ed9
Removed trailing white space
2021-02-20 17:23:23 +00:00
ZodiusInfuser
dea498a51f
Added new line
2021-02-20 17:20:28 +00:00
ZodiusInfuser
9fbeb0baea
Added new line
2021-02-20 17:20:06 +00:00
ZodiusInfuser
03577ec81c
Added new line
2021-02-20 17:19:45 +00:00
ZodiusInfuser
dac81ea545
Added new line
2021-02-20 17:19:31 +00:00
ZodiusInfuser
0a00f91979
Added new line
2021-02-20 17:15:42 +00:00
ZodiusInfuser
f1df07002f
Added new line
2021-02-20 17:15:20 +00:00
ZodiusInfuser
27bc5492f5
Added other files for PicoSystem
2021-02-20 13:37:08 +00:00
ZodiusInfuser
e9c7af1dee
Added board.c for PicoSystem
2021-02-20 13:36:46 +00:00
ZodiusInfuser
fb7cce6503
Added other files for Keybow2040
2021-02-20 13:35:27 +00:00
ZodiusInfuser
7ac20bfb8b
Added board.c for Keybow2040
2021-02-20 13:35:06 +00:00
ZodiusInfuser
66dd74cd12
Added other files for Tiny2040
2021-02-20 13:33:54 +00:00
ZodiusInfuser
ad8916499d
Added board.c for Tiny2040
2021-02-20 13:32:54 +00:00
Dan Halbert
67406488d1
merge from upstream; re-alphabetize
2021-02-19 14:22:50 -05:00
ZodiusInfuser
ee5a48fece
Delete pimoroni_tiny2040
2021-02-19 18:30:29 +00:00
ZodiusInfuser
db102ab1ad
Create pimoroni_tiny2040
2021-02-19 18:29:57 +00:00
microDev
b12ccefbe6
uart implementation for rp2040
2021-02-19 18:36:00 +05:30
Jeff Epler
1cd4e4552e
Merge pull request #4219 from jepler/bit_transpose
...
Add Bit transpose function to support piopixl8
2021-02-18 20:29:05 -06:00
Jeff Epler
7fd4567893
bitops: rename from _bit_transpose, describe the algorithm
2021-02-18 15:41:23 -06:00
Dan Halbert
53a002a096
Initial fix, but bitbangio timing may be off
2021-02-18 13:14:51 -05:00
Jeff Epler
9cf7d73c6c
core: add bit_transpose function
...
.. this version can only handle exactly 8 bits "across". The restriction
may be relaxed in a future revision.
2021-02-18 11:32:47 -06:00
microDev
696d212dc7
fix nvm rewrite
2021-02-18 18:42:00 +05:30
Jeff Epler
ab5eb86118
raspberrypi: implement os.urandom
...
Since the datasheet cast some doubt on the strength of the "rosc_hw->randombit",
I use the SHA256 hash function to create a high quality random seed
from random values of uncertain entropy, as well as to generate a sequence
of random values from that seed using SHA256 as a cryptographically-secure
random number generator.
In practice, it produces over 100kB/s of random data which does not
have any gross problems according to _PractRand_.
2021-02-17 17:49:25 -06:00
Dan Halbert
0b8f1b9a90
wip: usb_cdc.serials
2021-02-15 20:06:18 -05:00
Dan Halbert
93d788543c
Merge remote-tracking branch 'adafruit/main' into secondary-cdc
2021-02-15 20:03:53 -05:00
Dan Halbert
0ec99b37e0
handle 100% duty cycle; improve actual_frequency calc
2021-02-13 13:16:49 -05:00
Dan Halbert
d54b5861a3
wip
2021-02-12 19:01:14 -05:00
Dan Halbert
3e4328140c
fix off-by-one PWM top issue
2021-02-12 15:53:31 -05:00
Jeff Epler
ff1942cff6
Enable protomatter on RP2040 builds
...
Also found a race condition between timer_disable and redraw, which
would happen if I debugger-paused inside common_hal_rgbmatrix_timer_disable
or put a delay or print inside it. That's what pausing inside reconstruct
fixes.
So that the "right timer" can be chosen, `timer_allocate` now gets the `self`
pointer. It's guaranteed at this point that the pin information is accurate,
so you can e.g., find a PWM unit related to the pins themselves.
This required touching each port to add the parameter even though it's
unused everywhere but raspberrypi.
2021-02-12 08:25:15 -06:00
microDev
f2d7a5f1e1
Merge branch 'main' into nvm-rp
2021-02-12 18:36:54 +05:30
microDev
527b11f99e
implement suggested changes
...
- update FLASH_FIRMWARE length
- use linker script define value
2021-02-12 18:28:48 +05:30
Dan Halbert
08f30fedf5
Merge pull request #4188 from ladyada/main
...
QT Py with RP2040
2021-02-11 22:19:56 -05:00
lady ada
6c914b8722
QT Py with RP2040
2021-02-11 19:21:42 -05:00
Dan Halbert
f0564b4986
merge from upstream; complicated webusb merge
2021-02-11 18:50:02 -05:00
microDev
205837c47b
nvm implementation for rp2040
2021-02-11 12:48:36 +05:30
Scott Shawcroft
191b143e7b
Add PWM based audio playback
...
See
https://learn.adafruit.com/circuitpython-essentials/circuitpython-audio-out
to get started.
Fixes #4037
2021-02-09 15:38:33 -08:00
Scott Shawcroft
b19c700d4a
Merge pull request #4165 from DavePutz/issue_4143
...
Issue 4143 - Fixed marking a PWM slice incorrectly as variable frequency
2021-02-09 14:30:39 -08:00
root
9a28f0bf45
Fix check for variable PWM frequency
2021-02-09 15:22:59 -06:00
Dan Halbert
3c99b09993
Merge pull request #4160 from gamblor21/rp2040_neopixel_pin_fix
...
RP2040 Set the neopixel pin as output after PIO use
2021-02-08 17:57:30 -05:00
Dan Halbert
b0ed258302
Merge pull request #4155 from jepler/rpi-pio-background
...
rp2pio: Transfer up to 32 bytes before checking background tasks
2021-02-08 16:34:16 -05:00
gamblor21
386b49c3e1
Set the pin as output after PIO use
2021-02-08 15:13:37 -06:00
Jeff Epler
5423e4966c
rp2pio: Transfer up to 32 bytes before checking background tasks
...
@Jerryneedell noticed that this problem affected strips short enough
to not use the DMA peripheral, thanks for the hot tip!
Instead of checking for background tasks after every byte transfer,
try up to 32 transfers before attending to background tasks.
This fixes the problem I was seeing on my 5-pixel circuit.
Closes #4135 .
2021-02-08 08:35:07 -06:00
Jason Nichols
ae262cde55
Fix maximum PIO instructions
2021-02-06 10:54:25 -05:00
Scott Shawcroft
22dc7d5359
Update to the very latest SDK w/GP15 restore
...
Also adds unique id support
Fixes #4039 and hopefully #4107
2021-02-05 18:44:06 -08:00
Scott Shawcroft
c6a7b00030
Merge pull request #4137 from ferret-guy/smps-mode-pin-rpi-pico
...
Add SMPS mode pin to Raspi Pico pins.c
2021-02-05 12:12:55 -08:00
Scott Shawcroft
e7438c481e
Merge pull request #4125 from xorbit/main
...
Add A3 pin to Raspberry Pi Pico
2021-02-05 12:08:35 -08:00
Mark Omo
1292c35d59
Add SMPS mode pin to Raspi Pico pins.c
...
Add SMPS mode pin to Raspi Pico pins.c; see section "4.3. Using the ADC" of the Pico datasheet for discussion.
Driving this pin high forces the onboard regulator into a lower noise PWM mode.
2021-02-05 11:09:40 -07:00
Patrick Van Oosterwijck
a158dde628
Add alternate name VOLTAGE_MONITOR for A3
2021-02-05 10:55:03 -07:00
Dan Halbert
0802b22ed6
usb descriptors all set; rework of enabling for USB devices
2021-02-04 19:23:40 -05:00
Jeff Epler
6e153d9948
raspberrypi: implement reset, reset_to_bootloader
...
This makes all the following work:
* normal microcontroller.reset()
* reset into safe mode or UF2 bootloader via microcontroller.on_next_reset()
* reset into UF2 bootloader via the "1200 baud trick"
The implementation of reset_cpu is from micropython.
2021-02-04 12:07:50 -06:00
Patrick Van Oosterwijck
d357a05870
Add A3 pin to Raspberry Pi Pico
...
We want to be able to use this to measure VSYS.
2021-02-04 10:44:37 -07:00
BiffoBear
2656c84b01
Initial commit. Edited error messages in .c files
2021-02-03 05:49:40 +07:00
Scott Shawcroft
8789a2c8a9
Merge pull request #4110 from microDev1/rtc-rp
...
RP2040: Support for RTC
2021-02-01 19:47:44 -08:00
microDev
ec03267035
rtc implementation for rp2040
2021-02-02 00:00:00 +05:30
Dan Halbert
459f323247
Merge pull request #4087 from DavePutz/cpu_temp_doc
...
Fixing microcontroller.cpu on multi-core cpus and adding microcontroller.cpus
2021-02-01 12:50:37 -05:00
Scott Shawcroft
17cf03c8e4
Merge pull request #4083 from microDev1/watchdog-rp
...
RP2040: Support for WatchDog
2021-01-31 19:45:38 -08:00
microDev
34fe152fcf
extend include path
2021-01-30 14:00:14 +05:30
James Bowman
acbf66dacc
Make sys.platform "RP2040" on raspberrypi
...
[#4091 ]
2021-01-29 12:33:37 -08:00
James Bowman
067f42b4f8
Add Gameduino 3X Dazzler support on raspberry_pi_pico
...
Tested with hardware. Looks good.
Follow on from #4054
2021-01-29 12:25:59 -08:00
root
67f128c0cf
Fixing microcontroller.cpu on muti-core cpus and adding microcontroller.cpus
2021-01-28 14:42:39 -06:00
microDev
a54b57ea40
watchdog implementation for rp2040
2021-01-28 15:15:15 +05:30
Dan Halbert
29e672fe86
Merge pull request #4071 from tannewt/rp2040_uart_error
...
Raise an error on UART use
2021-01-26 15:22:02 -05:00
Dan Halbert
a9227e15d0
Merge pull request #4063 from dhalbert/rp2040-gp15
2021-01-26 13:38:41 -05:00
Scott Shawcroft
b42e94ee2c
Raise an error on UART use
2021-01-26 08:48:30 -08:00
Dan Halbert
be4cfdd3d6
Use TOTAL_GPIO_COUNT instead of magic number 30
2021-01-25 22:16:24 -05:00
Dan Halbert
0fa5aa359d
Stop treating pin 15 specially.
2021-01-25 16:07:01 -05:00
Dan Halbert
69c71bd522
fix some build errors
2021-01-25 11:54:10 -05:00
Dan Halbert
1e97d384ff
add GP15
2021-01-25 11:02:32 -05:00
Dan Halbert
69869e1439
CIRCUITPY_* switches for JSON, RE, etc. Doc cleanup
2021-01-24 23:10:20 -05:00
Scott Shawcroft
de6b05a17b
Fix DigitalInOut.pull on RP2040
...
It used to always return None.
Fixes #4035
2021-01-22 19:00:37 -08:00
Dan Halbert
e8e8c593ac
move longint choice to mpconfigport.mk
2021-01-21 22:50:15 -05:00
root
f39ca0a1d6
Adding longing support on RP2040
2021-01-21 16:42:16 -06:00
root
3aab17c98e
Adding longint support on RP2040
2021-01-21 16:40:57 -06:00
Scott Shawcroft
b73b30ff9f
Switch to upstream TinyUSB
2021-01-21 11:33:13 -08:00
Scott Shawcroft
b47fd08b20
copy editing
2021-01-21 10:17:40 -08:00
Scott Shawcroft
b0f7fd933f
type fix
2021-01-20 23:33:00 -08:00
Scott Shawcroft
6a6f22b0e6
pre-commit
2021-01-20 23:30:15 -08:00
Scott Shawcroft
48721584f9
Temporarily turn off string op overflow check
2021-01-20 19:16:56 -08:00
Scott Shawcroft
733094aead
Add initial RP2040 support
...
The RP2040 is new microcontroller from Raspberry Pi that features
two Cortex M0s and eight PIO state machines that are good for
crunching lots of data. It has 264k RAM and a built in UF2
bootloader too.
Datasheet: https://pico.raspberrypi.org/files/rp2040_datasheet.pdf
2021-01-20 19:16:56 -08:00
