3afa09b2fe
atmel-samd: Update Feather M0 Express USB pid.
2017-03-27 20:30:02 +01:00
f5caf86870
atmel-samd: Add message for when auto reset is off. Fixes #112
2017-03-27 20:12:30 +01:00
be1ed7aae4
Change to official Feather M0 Express branding.
2017-03-27 19:45:44 +01:00
ff208d7677
Add low-level OneWire support class.
...
This class focuses on the timing sensitive parts of the protocol.
Everything else will be done by Python code.
This also establishes that its OK to back a nativeio class with a
bitbang implementation when no hardware acceleration exists. When
it does, then bitbangio should be used to explicitly bitbang a
protocol.
2017-03-25 12:04:49 +00:00
7cb54864aa
Add PulseIn support which can be used to measure a series of pulse widths.
...
This is useful for infrared input and DHT sensors.
2017-03-24 10:30:15 +00:00
d200a62164
Add PulseOut which can pulse a PWMOut for IR remote transmission.
2017-03-10 19:17:54 +01:00
fcd60915e2
atmel-samd: Turn on stack checking so infinite recursion doesn't completely crash.
2017-03-09 16:09:13 +01:00
d598c2a919
atmel-samd: Add USB HID mouse and keyboard support.
2017-02-27 15:43:58 +01:00
062fac1d43
atmel-samd: Use link time optimization to reduce code size of builds which
...
share space with the file system.
"Express" builds with SPI flash crash the compiler for some reason so its
currently disabled for them.
2017-02-26 01:00:33 +01:00
48d7fca25e
atmel-samd: Fix linking by providing cpu info.
2017-02-24 17:45:33 +01:00
75d6abe3bb
Correct name of mp_raise_NotImplementedError to make error name.
2017-02-24 16:46:38 +01:00
35071b3681
Make the build quieter by default.
2017-02-24 15:59:59 +01:00
e0ef7e3092
Add indices() support to slice.
2017-02-24 15:13:56 +01:00
12fa5b3a66
Switch exception throwing to mp_raise helpers. It saves a little code space each time to share the call.
2017-02-24 15:13:07 +01:00
efd429464e
atmel-samd: Switch to nano newlib and add size script to build.
2017-02-24 14:55:34 +01:00
261a6ff0bb
atmel-samd: Fix build by correcting internal neopixel writes.
2017-02-19 17:39:34 +01:00
a5a41d7163
atmel-samd: Save a little space by tweaking error messages.
2017-02-19 17:24:15 +01:00
8584f5fece
atmel-samd: Remove support for UART REPL from Arduino Zero.
2017-02-19 17:23:31 +01:00
f0b62a2b0e
Save space by only supporting 800khz neopixels.
2017-02-19 17:22:42 +01:00
710b5d8aff
Two I2C fixes:
...
1) Bus error will be thrown on read/write errors with errno set. (Read didn't used to fail at all.)
2) try_lock correctly returns boolean whether lock was grabbed.
Fixes #87
2017-02-19 17:02:29 +01:00
e9659e61f8
Switch enum-like attributes to all caps and add print support for them. Make room for this functionality by adding a shared __enter__ function object. #76
2017-02-19 16:11:33 +01:00
c4ee6d5716
atmel-samd: Remove pin reference from AnalogOut error. Fixes #83
2017-02-19 14:38:24 +01:00
c81052a256
atmel-samd: Stop calibrating the crystal for Gemma and Trinket. We need the space for other code.
2017-02-19 14:11:24 +01:00
9ed3e11aec
atmel-samd: Clean up I2C correctly when an initialization error occurs. Fixes #95 .
2017-02-13 16:46:57 +01:00
ae715a827b
atmel-samd: Rework the clock configs to only be crystalless when needed by the hardware.
2017-02-10 05:09:17 -08:00
370d1dec88
SPI tweaks for SD Cards:
...
* Always init SPI to 250k to start for SD cards.
* Add ability to configure byte written during read.
* Add ability to read and write to portions of buffers like existing I2C API.
2017-02-10 05:09:17 -08:00
597777e80b
atmel-samd: Update internal pins for Feather M0 Express Rev B
2017-02-02 12:12:05 -08:00
1da14b0eec
atmel-samd: Switch Metro back to including bootloader space.
2017-02-01 13:16:48 -08:00
8569395b5d
atmel-samd: Turn down the brightness of the status colors.
2017-02-01 13:15:46 -08:00
e3f9ee839a
Add frequency changing support to PWMOut.
...
You can either set it once up front, or set variable_frequency on custruction to
indicate that the frequency must be able to change. This informs whether a timer
can be shared amongst pins.
This also adds persistent clock calibration on atmel-samd. Once the device has
synced its clock frequency over USB it will remember that config value until USB
is used again. This helps ensure the clock frequency is similar on and off USB.
Lastly, this also corrects time.sleep() when on USB by correcting the tick counter.
2017-01-30 15:02:01 -08:00
749d22b5e6
atmel-samd: stop overwriting the flash FS.
2017-01-19 14:26:57 -08:00
79024f3fb9
atmel-samd: Change new flash FS name to CIRCUITPY
...
Fixes #79
2017-01-19 11:47:06 -08:00
dad33e6ad0
atmel-samd: Reset the DAC on soft reset. Fixes #80 .
2017-01-19 11:42:33 -08:00
f74e477966
atmel-samd: Fully reset the ADC state on reset to prevent a crash.
2017-01-19 11:26:41 -08:00
d29915ca3d
atmel-samd: Fix two more SERCOM configs, PA07 and PA06.
2017-01-18 15:04:35 -08:00
76a2178bd7
atmel-samd: Fix PA00 and PA01 sercoms. New CircuitPlayground prototype pinout.
2017-01-18 14:51:36 -08:00
1a86968912
atmel-samd: Fix neopixel timing by forcing the NVM cache to be deterministicly timed. Otherwise, bit order changes code timing. Fixes #74
2017-01-17 19:27:48 -08:00
42926c6159
atmel-samd: Fix whitespace.
2017-01-17 19:26:28 -08:00
179413aec2
atmel-samd: Support multiple ADC channels at once.
...
Fixes #61
2017-01-17 14:40:43 -08:00
d239dbdc28
More fixes to pin pull thanks to jerryn:
...
* Correct atmel-samd pin pull state.
* Correct conversion from python pull objects to C enum.
2017-01-16 15:32:23 -08:00
35a5d44399
atmel-samd: Ensure pin state for first script run because we don't
...
know the post-bootloader state.
Also, color the status LED purple for ValueErrors which are used to
indicate a pin in use.
2017-01-13 15:39:50 -08:00
f6cf8ae208
atmel-samd: Split UART pin names into two so that all names start
...
with a letter and are therefore valid Python.
Fixes #73 .
2017-01-12 13:53:47 -08:00
9ece7c907d
Add persistent VFS shares so that the devices can be used with USB
...
that is present across soft-reset.
2017-01-12 12:46:44 -08:00
0d408488c5
atmel-samd: Turn off FRAMEBUF because it takes a lot of space.
2017-01-12 12:46:43 -08:00
cea5503ca0
Fixup warnings from merge about undefined macro values, switch to
...
VM keyboard exception and switch to FATFS reader.
2017-01-12 12:46:18 -08:00
24765929ea
atmel-samd: Update pinouts for prototypes.
2017-01-08 22:11:27 -08:00
7c302c395e
Improve docs and update to CircuitPython.
2017-01-05 16:20:46 -08:00
89f4a5597b
atmel-samd: New revs which isolate the SPI for the external flash.
2017-01-05 14:36:33 -08:00
a9087fbaa2
atmel-samd: Change cplay pins to rev B.
2016-12-21 15:29:25 -08:00
7ce69959f9
atmel-samd: Tweaks for rev B of the prototype circuit playground.
2016-12-21 14:07:50 -08:00
Scott Shawcroft