4810722064
esp8266: Change nativeio.I2C to use bitbangio under the hood rather than throwing an error.
2017-03-28 18:54:16 +01:00
3afa09b2fe
atmel-samd: Update Feather M0 Express USB pid.
2017-03-27 20:30:02 +01:00
f5caf86870
atmel-samd: Add message for when auto reset is off. Fixes #112
2017-03-27 20:12:30 +01:00
be1ed7aae4
Change to official Feather M0 Express branding.
2017-03-27 19:45:44 +01:00
ff208d7677
Add low-level OneWire support class.
...
This class focuses on the timing sensitive parts of the protocol.
Everything else will be done by Python code.
This also establishes that its OK to back a nativeio class with a
bitbang implementation when no hardware acceleration exists. When
it does, then bitbangio should be used to explicitly bitbang a
protocol.
2017-03-25 12:04:49 +00:00
7cb54864aa
Add PulseIn support which can be used to measure a series of pulse widths.
...
This is useful for infrared input and DHT sensors.
2017-03-24 10:30:15 +00:00
d200a62164
Add PulseOut which can pulse a PWMOut for IR remote transmission.
2017-03-10 19:17:54 +01:00
07ea2abcb0
esp8266: Turn off framebuf to get space.
2017-03-10 19:13:06 +01:00
bccfbe4e00
Fix duty_cycle constructor argument to PWMOut.
2017-03-10 18:55:17 +01:00
fcd60915e2
atmel-samd: Turn on stack checking so infinite recursion doesn't completely crash.
2017-03-09 16:09:13 +01:00
0f78eea5d8
Update the Python intersphinx reference to Python 3 https.
2017-03-07 12:59:34 +01:00
4aaa0ea008
shared-bindings: Do a pass on the docs and make sure keyword only arguments make sense and are documented correctly. Fixes #109
2017-03-07 12:58:57 +01:00
3891dde7ff
shared-bindings: Reenable struct_time. It was turned off when playing with LTO and never re-enabled.
2017-03-07 12:47:26 +01:00
7ecbc3a148
shared-bindings: Fix two more try_locks. Copy and paste failed me.
2017-02-28 12:31:27 +01:00
d598c2a919
atmel-samd: Add USB HID mouse and keyboard support.
2017-02-27 15:43:58 +01:00
062fac1d43
atmel-samd: Use link time optimization to reduce code size of builds which
...
share space with the file system.
"Express" builds with SPI flash crash the compiler for some reason so its
currently disabled for them.
2017-02-26 01:00:33 +01:00
3fd19c60cc
py: Fix recursion exception.
2017-02-24 17:47:25 +01:00
aef0586ee1
py: Fix varg helpers by adding vlist variant of mp_obj_new_exception_msg
2017-02-24 17:47:02 +01:00
48d7fca25e
atmel-samd: Fix linking by providing cpu info.
2017-02-24 17:45:33 +01:00
7dbe4e98a7
Make slice make_new match mp_make_new_fun_t exactly, check the input type and enable it for qemu tests.
2017-02-24 16:48:01 +01:00
75d6abe3bb
Correct name of mp_raise_NotImplementedError to make error name.
2017-02-24 16:46:38 +01:00
35071b3681
Make the build quieter by default.
2017-02-24 15:59:59 +01:00
baf3ff377e
Make more type structures const to save RAM.
2017-02-24 15:23:26 +01:00
e0ef7e3092
Add indices() support to slice.
2017-02-24 15:13:56 +01:00
12fa5b3a66
Switch exception throwing to mp_raise helpers. It saves a little code space each time to share the call.
2017-02-24 15:13:07 +01:00
efd429464e
atmel-samd: Switch to nano newlib and add size script to build.
2017-02-24 14:55:34 +01:00
75d0b02b3f
Throw an error when sleep time is negative.
2017-02-22 20:41:00 +01:00
4c05086661
Check that neopixel write is actually given a DigitalInOut.
2017-02-22 20:10:10 +01:00
fc718d9437
ESP8266: Stop supporting 400khz neopixels through old esp module API.
...
It still accepts the parameter for backwards compatibility and to
provide a good error when it can't work.
Using the `neopixel_write` module instead is recommended because its
available on all CircuitPython supported ports.
2017-02-22 12:59:04 +01:00
44e5d36086
ESP8266: Add reset note to webrepl init.
2017-02-21 11:50:32 +01:00
261a6ff0bb
atmel-samd: Fix build by correcting internal neopixel writes.
2017-02-19 17:39:34 +01:00
a5a41d7163
atmel-samd: Save a little space by tweaking error messages.
2017-02-19 17:24:15 +01:00
8584f5fece
atmel-samd: Remove support for UART REPL from Arduino Zero.
2017-02-19 17:23:31 +01:00
f0b62a2b0e
Save space by only supporting 800khz neopixels.
2017-02-19 17:22:42 +01:00
710b5d8aff
Two I2C fixes:
...
1) Bus error will be thrown on read/write errors with errno set. (Read didn't used to fail at all.)
2) try_lock correctly returns boolean whether lock was grabbed.
Fixes #87
2017-02-19 17:02:29 +01:00
e9659e61f8
Switch enum-like attributes to all caps and add print support for them. Make room for this functionality by adding a shared __enter__ function object. #76
2017-02-19 16:11:33 +01:00
c4ee6d5716
atmel-samd: Remove pin reference from AnalogOut error. Fixes #83
2017-02-19 14:38:24 +01:00
d67968e3c3
Add print support to Pin. #83 #76
2017-02-19 14:23:29 +01:00
39ac7240a8
Add CircuitPlayground, Trinket and Gemma to Travis build.
2017-02-19 14:11:55 +01:00
c81052a256
atmel-samd: Stop calibrating the crystal for Gemma and Trinket. We need the space for other code.
2017-02-19 14:11:24 +01:00
b7ded4c934
esp8266: Allow for MOSI or MISO only SPI. Fixes #65
2017-02-19 13:15:23 +01:00
3dda38c8ab
Fix pin free check to ignore None objects. Fixes #89
2017-02-19 12:59:31 +01:00
1a3bd67833
nativeio.SPI: Remove extraneous constructor args because they are in configure.
2017-02-19 12:57:00 +01:00
f511c263a0
ESP8266: Make sure SPI write finishes before returning.
...
Fixes #62 .
2017-02-15 17:25:41 +01:00
49287e91b1
ESP8266: Rework the execution flow to match the SAMD21.
...
* Support code.txt and variants.
* Add wait state for connection indicated by receiving a character.
* Add another wait state on every soft reset to give instruction for
soft reset rather than entering REPL.
AMPY use remains the same. The wait states can be exited with CTRL-C
just like the REPL.
Fixes #70 .
2017-02-15 17:00:09 +01:00
f2c787d0b4
Fix the keyboard exception in REPL by ignoring forced exit results when in REPL. Also, print the exception correctly. Fixes #57
2017-02-15 15:48:39 +01:00
b950709bea
Fix tests that rely on sys.implementation.name to work with circutpython response.
2017-02-14 10:57:00 +01:00
18c299b13d
Make mp_float_t conversions explicit to silence warnings of converting floats to doubles.
2017-02-14 10:55:54 +01:00
9ed3e11aec
atmel-samd: Clean up I2C correctly when an initialization error occurs. Fixes #95 .
2017-02-13 16:46:57 +01:00
26c61d43f4
Change sys.implementation to return circuitpython and the circuitpython version number that doesn't start with v. Fixes #86 .
2017-02-13 16:23:46 +01:00
Scott Shawcroft