Commit Graph

248 Commits

Author SHA1 Message Date
Damien George 0a51073724 stm32/boards: Remove trailing spaces, and add newline at end of file.
Signed-off-by: Damien George <damien@micropython.org>
2021-09-10 16:09:03 +10:00
Tobias Thyrrestrup 4c31d0ab60 stm32/boards/LEGO_HUB_NO6: Remove user paths from cc2564 init file.
Signed-off-by: Tobias Thyrrestrup <tt@LEGO.com>
2021-09-10 16:00:21 +10:00
Daniel Gorny b71c621f46 stm32/boards/OLIMEX_E407: Add Ethernet RMII support. 2021-09-10 15:52:03 +10:00
Boris Vinogradov 97bbc0bb91 stm32/boards/VCC_GND_H743VI: Add board definition for VCC_GND_H743VI. 2021-09-10 15:49:26 +10:00
Damien George 25f30eb8a6 stm32/boards/LEGO_HUB_NO6: Add comment re constraints on SPI flash cfg.
Signed-off-by: Damien George <damien@micropython.org>
2021-09-02 00:03:41 +10:00
Damien George 6f19b9c08d stm32/boards/LEGO_HUB_NO6: Add make commands to backup/restore firmware.
Signed-off-by: Damien George <damien@micropython.org>
2021-08-31 00:16:39 +10:00
Damien George bac791c5fd stm32/boards/LEGO_HUB_NO6: Skip first 1MiB of SPI flash for storage.
The first 1MiB is used by the built-in bootloader and is best left as-is.

Signed-off-by: Damien George <damien@micropython.org>
2021-08-31 00:16:39 +10:00
Damien George e3eed26d0b stm32/boards/LEGO_HUB_NO6: Change SPI flash storage to use hardware SPI.
Signed-off-by: Damien George <damien@micropython.org>
2021-08-31 00:16:39 +10:00
Jim Mussared b51e7e9d01 stm32: Disable computed goto on constrained boards.
Saves ~1kiB.  Add comment to this effect to mpconfig.h.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-20 20:18:52 +10:00
Jim Mussared e64cda5295 stm32: Add implementation of machine.bitstream.
Hand-written version for M0, and cycle-counter version for everything else.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2021-08-19 22:50:32 +10:00
Ned Konz a0cd18c1a5 stm32/boards/NUCLEO_H743ZI2: Add modified version of NUCLEO_H743ZI.
This commit creates a new stm32 board for the NUCLEO_H743ZI2, which is the
current version of this from ST.  This is a modified copy of the
NUCLEO_H743ZI board, and the ZI2 board differs in a few minor ways:

- LED2 has moved from PB7 to PE1 and is now yellow rather than blue
- the USB power enable has moved from PG6 to PG10
- the USER button is now pulled down
2021-08-10 23:38:05 +10:00
Damien George 3b32b3d1b3 stm32/usbd_cdc_interface: Rename USBD_CDC_xx opts to MICROPY_HW_USB_xx.
Signed-off-by: Damien George <damien@micropython.org>
2021-08-07 23:13:58 +10:00
Tobias Thyrrestrup 7a1edb91cb stm32/boards/LEGO_HUB_NO6: Add board definition for LEGO_HUB_NO6.
Add basic support for LEGO HUB NO.6 (e.g. LEGO SPIKE Prime, LEGO MINDSTORMS
Robot Inventor).

See README.md for details.

Thanks to @dpgeorge for helping put this together.

Signed-off-by: Tobias Thyrrestrup <tt@LEGO.com>
2021-07-31 10:25:18 +10:00
Damien George 224ac355cd stm32/boards/NUCLEO_F439ZI: Add board definition for NUCLEO_F439ZI.
Signed-off-by: Damien George <damien@micropython.org>
2021-07-27 16:46:10 +10:00
Matúš Olekšák 0f0006f4e1 stm32/boards/STM32F429DISC: Set correct UART2 pins and add UART3/6. 2021-07-26 14:38:39 +10:00
Damien George fef2114404 stm32/uart: Fix LPUART1 baudrate set/get.
It needs to use a different function because the formula to compute the
baudrate on LPUART1 is different to a normal UART.

Fixes issue #7466.

Signed-off-by: Damien George <damien@micropython.org>
2021-07-26 13:53:50 +10:00
Chris Wilson aecb697c72 stm32/boards: Add support for SparkFun STM32 MicroMod Processor board.
Signed-off-by: Chris Wilson <christopher.david.wilson@gmail.com>
2021-07-23 22:03:16 +10:00
Sashkoiv 753b08cae6 stm32/boards/NUCLEO_F446RE: Enable CAN bus support. 2021-07-23 00:06:13 +10:00
Damien George 831cc4a61d stm32/boards/NUCLEO_F446RE: Fix I2C1 pin assignment to match datasheet.
Thanks to @aureliano2nd.

Signed-off-by: Damien George <damien@micropython.org>
2021-07-13 15:25:27 +10:00
Mike Teachman 8a5bfe44a5 esp32,stm32: Add new machine.I2S class for I2S protocol support.
This commit adds I2S protocol support for the esp32 and stm32 ports, via
a new machine.I2S class.  It builds on the stm32 work of blmorris, #1361.

Features include:
- a consistent I2S API across the esp32 and stm32 ports
- I2S configurations supported:
  - master transmit and master receive
  - 16-bit and 32-bit sample sizes
  - mono and stereo formats
  - sampling frequency
  - 3 modes of operation:
    - blocking
    - non-blocking with callback
    - uasyncio
  - internal ring buffer size can be tuned
- documentation for Pyboards and esp32-based boards
- tested on the following development boards:
  - Pyboard D SF2W
  - Pyboard V1.1
  - ESP32 with SPIRAM
  - ESP32

Signed-off-by: Mike Teachman <mike.teachman@gmail.com>
2021-07-05 23:42:25 +10:00
Damien George 86ef965352 stm32/adc: Simplify and generalise how pin_adcX table is defined.
The ADC_FIRST_GPIO_CHANNEL and ADC_LAST_GPIO_CHANNEL macros are no longer
needed.  Instead the pin_adcX table (X = 1, 2, 3) is now generated to be
the exact size needed for a given MCU, and MP_ARRAY_SIZE(pin_adcX) is used
to determine the upper bound.

This commit also allows CPU pins to be excluded from ADC configuration if
they are hidden by prefixing their name with a "-".

Signed-off-by: Damien George <damien@micropython.org>
2021-07-05 16:03:11 +10:00
Damien George cf849d84b9 stm32/boards: Enable MICROPY_HW_SPIFLASH_ENABLE_CACHE on VCC_GND boards.
Because these boards use the SPI flash cache in their bdev.c configuration.

Signed-off-by: Damien George <damien@micropython.org>
2021-06-10 22:48:17 +10:00
Damien George 211c3e41f1 stm32/boards/PYBD_SF2: Disable GCC 11 warnings for array bounds.
With GCC 11 there is now a warning about array bounds of OTP-mac, due to
the OTP being a literal address.

Signed-off-by: Damien George <damien@micropython.org>
2021-05-27 23:57:51 +10:00
Damien George 62f75376dd stm32/boards/NUCLEO_L432KC: Fix FS size and enable LFS1 filesystem.
Signed-off-by: Damien George <damien@micropython.org>
2021-05-27 12:18:41 +10:00
Mike Causer 47b778332a all: Replace busses with buses.
"buses" is the widely accepted plural form of "bus".
2021-05-20 23:22:03 +10:00
Mike Causer 1ca66efbf7 stm32/boards: Add VCC_GND_F407ZG board. 2021-05-20 23:17:51 +10:00
Mike Causer c24003abec stm32/boards: Add VCC_GND_F407VE board. 2021-05-20 23:15:56 +10:00
David Lechner ca0c75f504 stm32/boards: Change default LSI_VALUE to 32000 for F4 MCUs.
In the STM32 HAL libraries, the default value for LSI_VALUE for F4 MCUs is
32 kHz.

Signed-off-by: David Lechner <david@pybricks.com>
2021-05-04 16:53:40 +10:00
iabdalkader baa712b7f0 stm32/boards/PYBD_SF2: Enable RF switch compile option. 2021-04-30 10:16:15 +10:00
Damien George cf7e71fa43 stm32/sdcard: Allow configuring the SDMMC periph used for SD/MMC card.
This can now be selected by setting MICROPY_HW_SDCARD_SDMMC, which defaults
to 1, ie SDMMC1.  This commit also renames the SD pin configuration macros
from MICROPY_HW_SDMMC2_xxx to MICROPY_HW_SDCARD_xxx, as well as renaming
MICROPY_HW_SDMMC_BUS_WIDTH to MICROPY_HW_SDCARD_BUS_WIDTH.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 00:58:17 +10:00
Damien George 6e0f9b9262 stm32/boards/pllvalues.py: Support wider range of PLL values for F413.
Signed-off-by: Damien George <damien@micropython.org>
2021-04-20 23:33:33 +10:00
Damien George 25c029ce9f stm32/boards: Split UARTx_RTS_DE into UARTx_RTS/UARTx_DE in pin defs.
So these alternate functions can be parsed by the build scripts and used in
application code.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-13 23:58:20 +10:00
aziubin 7546d3cf73 stm32/boards/NUCLEO_L476RG: Add 5 remaining UARTs.
STM32L476RG MCU of NUCLEO_L476RG board has 6 UART/USART units in total
(USART1, USART2, USART3, UART4, UART5 and LPUART1), but only UART2,
connected to REPL, was defined and available in Python code.
Defined are all 5 remaining UART/USART units including LPUART1.

Signed-off-by: Alexander Ziubin aziubin@googlemail.com
2021-04-09 15:00:55 +10:00
Damien George cb396827f5 stm32/boards/pllvalues.py: Relax PLLQ constraints on STM32F413 MCUs.
Signed-off-by: Damien George <damien@micropython.org>
2021-04-07 12:47:21 +10:00
Damien George 25ae169e6e stm32: Include .ARM section in firmware for C++ exception handling.
Support for C++ was added in 97960dc7de but
that commit didn't include the C++ exception handling table in the binary
firmware image.  This commit fixes that.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-06 12:11:15 +10:00
Damien George 03a64f2077 stm32/boards/NUCLEO_WB55: Enable LPUART1 on PA2/PA3.
Signed-off-by: Damien George <damien@micropython.org>
2021-02-21 15:49:33 +11:00
Chris Mason 9d674cf7ab stm32/uart: Add support for LPUART1 on L0, L4, H7 and WB MCUs.
Add LPUART1 as a standard UART.  No low power features are supported, yet.
LPUART1 is enabled as the next available UART after the standard U(S)ARTs:

    STM32WB:      LPUART1 = UART(2)
    STM32L0:      LPUART1 = UART(6)
    STM32L4:      LPUART1 = UART(6)
    STM32H7:      LPUART1 = UART(9)

On all ports: LPUART1 = machine.UART('LP1')

LPUART1 is enabled by defining MICROPY_HW_LPUART1_TX and
MICROPY_HW_LPUART1_RX in mpconfigboard.h.

Signed-off-by: Chris Mason <c.mason@inchipdesign.com.au>
2021-02-21 15:49:32 +11:00
Damien George 301fe805ca stm32/mpbtstackport: Allow chipset and secondary baudrate to be set.
Signed-off-by: Damien George <damien@micropython.org>
2021-02-17 15:47:17 +11:00
Damien George 5c92ff53fe stm32/boards: Disable onewire module on boards with small flash.
Signed-off-by: Damien George <damien@micropython.org>
2021-02-17 14:42:46 +11:00
Damien George d2a34c62e7 stm32/uart: Add uart_set_baudrate function.
This allows changing the baudrate of the UART without reinitialising it
(reinitialising can lead to spurious characters sent on the TX line).

Signed-off-by: Damien George <damien@micropython.org>
2021-02-14 18:30:49 +11:00
Damien George 0efa0b5437 stm32/mboot: Add ELEM_TYPE_STATUS element so application can get status.
This new element takes the form: (ELEM_TYPE_STATUS, 4, <address>).  If this
element is present in the mboot command then mboot will store to the given
address the result of the filesystem firmware update process.  The address
can for example be an RTC backup register.

Signed-off-by: Damien George <damien@micropython.org>
2021-01-29 15:02:55 +11:00
Damien George f6e6ef69e0 stm32/boards/NUCLEO_WB55: Enable MBOOT with packing mode.
To have at least one board configured with MBOOT_ENABLE_PACKING, for CI
testing purposes and demonstration of the feature.

Signed-off-by: Damien George <damien@micropython.org>
2021-01-18 12:43:01 +11:00
Damien George e715a8fb9b stm32/boards/PYBD_SF2: Disable SPIFLASH_ENABLE_CACHE for mboot builds.
Mboot builds do not use the external SPI flash in caching mode, and
explicitly disabling it saves RAM and a small bit of flash.

Signed-off-by: Damien George <damien@micropython.org>
2020-12-18 13:39:32 +11:00
Damien George e43a74a4db drivers/memory/spiflash: Add MICROPY_HW_SPIFLASH_ENABLE_CACHE option.
This only needs to be enabled if a board uses FAT FS on external SPI flash.
When disabled (and using external SPI flash) 4k of RAM can be saved.

Signed-off-by: Damien George <damien@micropython.org>
2020-12-18 13:39:32 +11:00
Damien George 80883a82c0 stm32/adc: Deselect VBAT after reading to prevent battery drain.
Signed-off-by: Damien George <damien@micropython.org>
2020-12-18 13:32:02 +11:00
Reinhard Feger 032e095620 stm32/boards/NUCLEO_H743ZI: Enable ethernet peripheral. 2020-12-08 15:27:51 +11:00
Reinhard Feger cd61fc8e44 stm32/boards/stm32h743.ld: Enable D2 RAM and add eth-buffer section. 2020-12-08 15:27:27 +11:00
Damien George cc2a35b7b2 stm32/rtc: Validate the RTC prescaler on boot and change if incorrect.
Devices with RTC backup-batteries have been shown (very rarely) to have
incorrect RTC prescaler values.  Such incorrect values mean the RTC counts
fast or slow, and will be wrong forever if the power/backup-battery is
always present.

This commit detects such a state at start up (hard reset) and corrects it
by reconfiguring the RTC prescaler values.

Signed-off-by: Damien George <damien@micropython.org>
2020-11-13 11:23:52 +11:00
Damien George 97960dc7de stm32: Support C++ code and user C modules written in C++.
Also build user C modules as part of the stm32 CI.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-29 23:35:36 +11:00
Damien George df3b466d6c stm32/boards: Factor out common data/bss/heap/stack linker sections.
Signed-off-by: Damien George <damien@micropython.org>
2020-10-29 23:31:59 +11:00