Commit Graph

164 Commits

Author SHA1 Message Date
Mike Teachman 8a5bfe44a5 esp32,stm32: Add new machine.I2S class for I2S protocol support.
This commit adds I2S protocol support for the esp32 and stm32 ports, via
a new machine.I2S class.  It builds on the stm32 work of blmorris, #1361.

Features include:
- a consistent I2S API across the esp32 and stm32 ports
- I2S configurations supported:
  - master transmit and master receive
  - 16-bit and 32-bit sample sizes
  - mono and stereo formats
  - sampling frequency
  - 3 modes of operation:
    - blocking
    - non-blocking with callback
    - uasyncio
  - internal ring buffer size can be tuned
- documentation for Pyboards and esp32-based boards
- tested on the following development boards:
  - Pyboard D SF2W
  - Pyboard V1.1
  - ESP32 with SPIRAM
  - ESP32

Signed-off-by: Mike Teachman <mike.teachman@gmail.com>
2021-07-05 23:42:25 +10:00
Damien George 37494b8c8a stm32/mboot: Allow mboot to be placed at any location in flash.
A board can now define MBOOT_TEXT0_ADDR to place mboot at a location other
than 0x08000000.  This can be useful if, for example, there is already a
different bootloader on the device.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-30 00:42:59 +10:00
Damien George cb396827f5 stm32/boards/pllvalues.py: Relax PLLQ constraints on STM32F413 MCUs.
Signed-off-by: Damien George <damien@micropython.org>
2021-04-07 12:47:21 +10:00
Damien George 25ae169e6e stm32: Include .ARM section in firmware for C++ exception handling.
Support for C++ was added in 97960dc7de but
that commit didn't include the C++ exception handling table in the binary
firmware image.  This commit fixes that.

Signed-off-by: Damien George <damien@micropython.org>
2021-04-06 12:11:15 +10:00
Damien George 6e5aea08a9 stm32/Makefile: Allow QSTR_DEFS,QSTR_GLOBAL_DEPENDENCIES to be extended.
So a board can provide custom qstr definitions if needed.

Signed-off-by: Damien George <damien@micropython.org>
2021-03-17 10:25:16 +11:00
stijn d53a6d58b0 stm32/Makefile: Fix C++ linker flags when toolchain has spaces in path.
The GNU Make dir command uses spaces as item separator so it does not
work for e.g building the STM32 port on Cygwin with a default Arm
installation in "c:/program files (x86)/GNU Arm Embedded Toolchain".
Fix by using POSIX dirname on a quoted path instead.
2021-03-16 12:54:16 +11:00
Damien George 49dd9ba1a5 stm32/Makefile: Use MBOOT_PACK_KEYS_FILE as depedency of .pack.dfu.
To match the definition of GENERATE_PACK_DFU, so a board can customise the
location/name of this file if needed.

Signed-off-by: Damien George <damien@micropython.org>
2021-01-18 13:53:54 +11:00
Damien George c6f334272a stm32/mboot: Add support for signed and encrypted firmware updates.
This commit adds support to stm32's mboot for signe, encrypted and
compressed DFU updates.  It is based on inital work done by Andrew Leech.

The feature is enabled by setting MBOOT_ENABLE_PACKING to 1 in the board's
mpconfigboard.mk file, and by providing a header file in the board folder
(usually called mboot_keys.h) with a set of signing and encryption keys
(which can be generated by mboot_pack_dfu.py).  The signing and encryption
is provided by libhydrogen.  Compression is provided by uzlib.  Enabling
packing costs about 3k of flash.

The included mboot_pack_dfu.py script converts a .dfu file to a .pack.dfu
file which can be subsequently deployed to a board with mboot in packing
mode.  This .pack.dfu file is created as follows:
- the firmware from the original .dfu is split into chunks (so the
  decryption can fit in RAM)
- each chunk is compressed, encrypted, a header added, then signed
- a special final chunk is added with a signature of the entire firmware
- all chunks are concatenated to make the final .pack.dfu file

The .pack.dfu file can be deployed over USB or from the internal filesystem
on the device (if MBOOT_FSLOAD is enabled).

See #5267 and #5309 for additional discussion.

Signed-off-by: Damien George <damien@micropython.org>
2021-01-18 12:43:01 +11:00
Damien George cb1bb7592e stm32/Makefile: Change -O0 to -Og for DEBUG=1 builds.
The -Og optimisation level produces a more realistic build, gives a better
debugging experience, and generates smaller code than -O0, allowing debug
builds to fit in flash.

This commit also assigns variables in can.c to prevent warnings when -Og is
used, and builds a board in CI with DEBUG=1 enabled.

Signed-off-by: Damien George <damien@micropython.org>
2020-12-07 22:27:38 +11:00
iabdalkader ce9197eb20 stm32/Makefile: Disable text compression in debug builds.
Otherwise the flash overflows.

Fixes issue #6653.
2020-12-07 16:45:15 +11:00
Jim Mussared 0e8af2b370 extmod/modbluetooth: Add API for L2CAP channels.
Also known as L2CAP "connection oriented channels". This provides a
socket-like data transfer mechanism for BLE.

Currently only implemented for NimBLE on STM32 / Unix.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-11-24 01:07:17 +11:00
Jim Mussared 81e92d3d6e extmod/modbluetooth: Re-instate optional no-ringbuf modbluetooth.
This requires that the event handlers are called from non-interrupt context
(i.e. the MicroPython scheduler).

This will allow the BLE stack (e.g. NimBLE) to run from the scheduler
rather than an IRQ like PENDSV, and therefore be able to invoke Python
callbacks directly/synchronously.  This allows writing Python BLE handlers
for events that require immediate response such as _IRQ_READ_REQUEST (which
was previous a hard IRQ) and future events relating to pairing/bonding.

Signed-off-by: Jim Mussared <jim.mussared@gmail.com>
2020-11-13 17:19:05 +11:00
Damien George a0623a081c stm32/Makefile: Allow boards to extend all SRC variables.
And rename SRC_HAL -> HAL_SRC_C and SRC_USBDEV -> USBDEV_SRC_C for
consistency with other source variables.

Follow on from 0fff2e03fe

Signed-off-by: Damien George <damien@micropython.org>
2020-11-13 11:22:28 +11:00
Sébastien NEDJAR b04240cb77 stm32/Makefile: Make the generation of `firmware.bin` explicit.
The file `$(BUILD)/firmware.bin` was used by the target `deploy-stlink` and
`deploy-openocd` but it was generated indirectly by the target
`firmware.dfu`.

As this file could be used to program boards directly by a Mass Storage
copy, it's better to make it explicitly generated.

Additionally, some target are refactored to remove redundancy and be more
explicit on dependencies.
2020-11-12 15:22:44 +11:00
Damien George 4c3976bbca stm32: Add MICROPY_BOARD calls in various places in stm32_main.
For a board to have full configurability of the soft reset loop.

Signed-off-by: Damien George <damien@micropython.org>
2020-11-11 21:41:04 +11:00
Damien George 97960dc7de stm32: Support C++ code and user C modules written in C++.
Also build user C modules as part of the stm32 CI.

Signed-off-by: Damien George <damien@micropython.org>
2020-10-29 23:35:36 +11:00
Damien George 0fff2e03fe stm32/Makefile: Allow boards to extend SRC_C, SRC_O and OBJ variables.
Signed-off-by: Damien George <damien@micropython.org>
2020-10-02 15:46:13 +10:00
Jim Mussared ed14435a8e extmod/modbluetooth: Refactor stack/hci/driver/port bindings.
Previously the interaction between the different layers of the Bluetooth
stack was different on each port and each stack.  This commit defines
common interfaces between them and implements them for cyw43, btstack,
nimble, stm32, unix.
2020-09-08 11:41:31 +10:00
Zoltán Vörös 27767aafa2 lib/libm_dbl: Add round.c source code.
This code is imported from musl, to match existing code in libm_dbl.

The file is also added to the build in stm32/Makefile.  It's not needed by
the core code but, similar to c5cc64175b,
allows round() to be used by user C modules or board extensions.
2020-07-21 11:07:19 +10:00
Thorsten von Eicken 5264478007 extmod/modussl_mbedtls: Integrate shorter error strings.
The stm32 and esp32 ports now use shorter error strings for mbedtls errors.
Also, MBEDTLS_ERROR_C is enabled on stm32 by default to get these strings.
2020-07-21 00:31:05 +10:00
stinos da71f55e23 stm32/Makefile: Quote libgcc path so spaces are not an issue.
Fixes #3116.
2020-06-02 14:11:08 +10:00
Jim Mussared 710426024a all: Factor gchelper code to one place and use it for unix & ARM ports.
No functionality change is intended with this commit, it just consolidates
the separate implementations of GC helper code to the lib/utils/ directory
as a general set of helper functions useful for any port.  This reduces
duplication of code, and makes it easier for future ports or embedders to
get the GC implementation correct.

Ports should now link against gchelper_native.c and either gchelper_m0.s or
gchelper_m3.s (currently only Cortex-M is supported but other architectures
can follow), or use the fallback gchelper_generic.c which will work on
x86/x64/ARM.

The gc_helper_get_sp function from gchelper_m3.s is not really GC related
and was only used by cc3200, so it has been moved to that port and renamed
to cortex_m3_get_sp.
2020-04-29 23:45:19 +10:00
Jim Mussared 0da47ecc93 stm32/Makefile: Rename SRC_LIB to LIB_SRC_C to match other ports. 2020-04-29 16:38:18 +10:00
Andrew Leech 8ee2e1fdbc stm32/mboot: Expose custom DFU USB VID/PID values at makefile level.
In mboot, the ability to override the USB vendor/product id's was added
back in 5688c9ba09.  However, when the main
firmware is turned into a DFU file the default VID/PID are used there.
pydfu.py doesn't care about this but dfu-util does and prevents its use
when the VID/PID don't match.

This commit exposes BOOTLOADER_DFU_USB_VID/PID as make variables, for use
on either command line or mpconfigboard.mk, to set VID/PID in both mboot
and DFU files.
2020-04-18 23:02:00 +10:00
stijn 30840ebc99 all: Enable extra conversion warnings where applicable.
Add -Wdouble-promotion and -Wfloat-conversion for most ports to ban out
implicit floating point conversions, and add extra Travis builds using
MICROPY_FLOAT_IMPL_FLOAT to uncover warnings which weren't found
previously.  For the unix port -Wsign-comparison is added as well but only
there since only clang supports this but gcc doesn't.
2020-04-18 22:42:28 +10:00
Jim Mussared 073b9a5eb8 ports: Enable error text compression for various ports, but not all.
Enabled on: bare-arm, minimal, unix coverage/dev/minimal, stm32, esp32,
esp8266, cc3200, teensy, qemu-arm, nrf.  Not enabled on others to be able
to test the code when the feature is disabled (the default case).

Code size change for this commit:

   bare-arm:  -600 -0.906%
minimal x86:  -308 -0.208%
   unix x64:    +0 +0.000%
unix nanbox:    +0 +0.000%
      stm32: -3368 -0.869% PYBV10
     cc3200: -1024 -0.558%
    esp8266: -2512 -0.368% GENERIC
      esp32: -2876 -0.205% GENERIC[incl -3168(data)]
        nrf: -1708 -1.173% pca10040
       samd:    +0 +0.000% ADAFRUIT_ITSYBITSY_M4_EXPRESS
2020-04-05 15:02:06 +10:00
Jim Mussared 994c1dd57a stm32/Makefile: Add missing ordering dependency on generated headers. 2020-04-05 14:12:59 +10:00
Zoltán Vörös c5cc64175b ports: Add lib/libm/roundf.c to bare-metal Makefile's.
This function is not used by the core but having it as part of the build
allows it to be used by user C modules, or board extensions.  The linker
won't include it in the final firmware if it remains unused.
2020-03-25 01:22:00 +11:00
Damien George 0e95815bfb stm32: Add bindings for BTstack implementation.
Work done in collaboration with Jim Mussared aka @jimmo.
2020-03-10 01:53:42 +11:00
Damien George 894c550c86 stm32: Refactor bluetooth stack/hci/driver bindings.
This makes a cleaner separation between the: driver, HCI UART and BT stack.
Also updated the naming to be more consistent (mp_bluetooth_hci_*).

Work done in collaboration with Jim Mussared aka @jimmo.
2020-03-10 01:53:42 +11:00
Damien George c44d52f33e extmod/modbluetooth_nimble: Move nimble specific code, factor nimble.mk.
Move extmod/modbluetooth_nimble.* to extmod/nimble.  And move common
Makefile lines to extmod/nimble/nimble.mk (which was previously only used
by stm32).  This allows (upcoming) btstack to follow a similar structure.

Work done in collaboration with Jim Mussared aka @jimmo.
2020-03-06 12:35:20 +11:00
Damien George 2c8c2b935e stm32/powerctrl: Improve support for changing system freq on H7 MCUs.
This commit improves pllvalues.py to generate PLL values for H7 MCUs that
are valid (VCO in and out are in range) and extend for the entire range of
SYSCLK values up to 400MHz (up to 480MHz is currently unsupported).
2020-01-31 23:25:18 +11:00
Damien George 7bb2bf965e stm32/Makefile: Allow a board's .mk file to add things to CFLAGS. 2020-01-30 14:39:46 +11:00
Damien George 93509ac8c7 stm32: Add configuration to build in nanbox mode.
Most stm32 boards can now be built in nan-boxing mode via:

    $ make NANBOX=1

Note that if float is enabled then it will be forced to double-precision.
Also, native emitters will be disabled.
2019-12-27 22:54:53 +11:00
Damien George c2eaf56634 stm32/Makefile: Enable max buffer size on W5200 NIC when used with lwIP.
Because in network_wiznet5k the TX/RX buffers are set to 16k each when in
MACRAW mode, which is used with lwIP.
2019-12-13 12:36:12 +11:00
Damien George 799b6d1e0c extmod: Consolidate FAT FS config to MICROPY_VFS_FAT across all ports.
This commit removes the Makefile-level MICROPY_FATFS config and moves the
MICROPY_VFS_FAT config to the Makefile level to replace it.  It also moves
the include of the oofatfs source files in the build from each port to a
central place in extmod/extmod.mk.

For a port to enabled VFS FAT support it should now set MICROPY_VFS_FAT=1
at the level of the Makefile.  This will include the relevant oofatfs files
in the build and set MICROPY_VFS_FAT=1 at the C (preprocessor) level.
2019-11-11 11:37:38 +11:00
Damien George 6a64b280d0 stm32: Add support for RF coprocessor on WB55 MCUs.
This requires a BLE wireless stack firmware to be already programmed in the
secure flash area of the device.
2019-11-01 14:52:17 +11:00
Damien George 48b25a841b stm32: Add machine.Timer with soft timer implementation.
This commit adds an implementation of machine.Timer backed by the soft
timer mechanism.  It allows an arbitrary number of timers with 1ms
resolution, with an associated Python callback.  The Python-level API
matches existing ports that have a soft timer, and is used as:

    from machine import Timer
    t = Timer(freq=10, callback=lambda t:print(t))
    ...
    t = Timer(mode=Timer.ONE_SHOT, period=2000, callback=lambda t:print(t))
    ...
    t.deinit()
2019-10-31 22:12:55 +11:00
Damien George a5d97f1db9 stm32: Add soft timer implementation, using SysTick at 1ms resolution.
This commit adds an implementation of a "software timer" with a 1ms
resolution, using SysTick.  It allows unlimited number of concurrent
timers (limited only by memory needed for each timer entry).  They can be
one-shot or periodic, and associated with a Python callback.

There is a very small overhead added to the SysTick IRQ, which could be
further optimised in the future, eg by patching SysTick_Handler code
dynamically.
2019-10-31 22:12:55 +11:00
Jim Mussared ece4e21a55 stm32/Makefile: Only enable hardware sqrt on parts that support it.
Not enough to detect f7/h7, need to use the specific parts.

Follow-up to 580a2656d1.
2019-10-28 15:08:28 +11:00
Damien George 287800d6e1 stm32: Convert to use FROZEN_MANIFEST to specify frozen code.
All symlinks are removed, frozen files are now referenced via
boards/manifest.py.
2019-10-15 21:36:24 +11:00
Damien George d7a9388fe0 ports: Add new make target "submodules" which inits required modules. 2019-10-15 17:14:41 +11:00
Jim Mussared 580a2656d1 stm32: Use hardware double sqrt on F7/H7 MCUs.
Identical to cd527bb324 but for doubles.
This gives a -2.754% improvement on bm_float.py, and -35% improvement on
calling sqrt in a loop.
2019-10-10 17:39:32 +11:00
Jim Mussared 902bb4ceae stm32: Extract port-specific Nimble implementation.
On other ports (e.g. ESP32) they provide a complete Nimble implementation
(i.e. we don't need to use the code in extmod/nimble). This change
extracts out the bits that we don't need to use in other ports:
 - malloc/free/realloc for Nimble memory.
 - pendsv poll handler
 - depowering the cywbt

Also cleans up the root pointer management.
2019-10-08 14:40:35 +11:00
Jim Mussared 6f35f214d3 stm32/mpconfigport.h: Add modbluetooth module to stm32. 2019-10-01 09:51:02 +10:00
Jim Mussared d72dbb822c stm32: Provide port-specific implementation for Nimble on STM32. 2019-10-01 09:51:02 +10:00
iabdalkader f7a07b3605 stm32: Add support for FDCAN peripheral, exposed as pyb.CAN.
The new fdcan.c file provides the low-level C interface to the FDCAN
peripheral, and pyb_can.c is updated to support both traditional CAN and
FDCAN, depending on the MCU being compiled for.
2019-09-23 17:00:54 +10:00
Damien George d06fd384c2 stm32/can: Factor CAN driver into low-level and Python bindings.
can.c now contains the low-level C interface to the CAN peripheral, and
pyb_can.c the Python-level class/methods/constants.
2019-09-23 16:58:08 +10:00
Damien George ebacdfabb6 stm32/machine_adc: Add machine.ADC class. 2019-09-04 15:40:24 +10:00
Damien George 59b7166d87 stm32: Add initial support for STM32WBxx MCUs.
This new series of MCUs is similar to the L4 series with an additional
Cortex-M0 coprocessor.  The firmware for the wireless stack must be managed
separately and MicroPython does not currently interface to it.  Supported
features so far include: RTC, UART, USB, internal flash filesystem.
2019-07-17 16:33:31 +10:00
Damien George 64aebca155 stm32/Makefile: Allow a board to disable float support.
By using "MICROPY_FLOAT_IMPL = none" in its mpconfigboard.mk file.
2019-07-16 14:47:32 +10:00
Damien George 4c1ad1f691 stm32: Add support for USB on L0 MCUs. 2019-07-16 14:45:53 +10:00
Damien George 5fd62c8992 stm32: Remove SystemInit funcs, use stm32lib versions instead.
stm32lib now provides system_stm32XXxx.c source files for all MCU variants,
which includes SystemInit and prescaler tables.  Since these are quite
standard and don't need to be changed, switch to use them instead of custom
variants, making the start-up code cleaner.

The SystemInit code in stm32lib was checked and is equivalent to what is
removed from the stm32 port in this commit.
2019-07-08 15:23:53 +10:00
Damien George 21ecf8be5f stm32/powerctrl: Move L0's SystemClock_Config to powerctrlboot.c file. 2019-07-08 15:23:53 +10:00
Damien George 23d9c6a0fd stm32: Add initial support for STM32L0xx MCUs. 2019-07-05 17:24:59 +10:00
Damien George 6b6403ce76 stm32/Makefile: Use startup_stm32*.s file from stm32lib.
This means that each MCU now gets a unique IRQ table, eg a specific one for
STM32F405, STM32F411, etc rather than just STM32F4xx.
2019-07-03 23:42:36 +10:00
Damien George 241e577753 stm32/Makefile: Remove Wno-attributes for ll_usb HAL file.
This HAL file is now patched so it doesn't have these warnings.
2019-07-03 23:41:33 +10:00
Damien George 04c7cdb668 stm32: Enter bootloader via a system reset.
Entering a bootloader (ST system bootloader, or custom mboot) from software
by directly branching to it is not reliable, and the reliability of it
working can depend on the peripherals that were enabled by the application
code.  It's also not possible to branch to a bootloader if the WDT is
enabled (unless the bootloader has specific provisions to feed the WDT).

This patch changes the way a bootloader is entered from software by first
doing a complete system reset, then branching to the desired bootloader
early on in the start-up process.  The top two words of RAM (of the stack)
are reserved to store flags indicating that the bootloader should be
entered after a reset.
2019-06-25 14:15:49 +10:00
Damien George 205c6d0dc9 stm32/Makefile: Print info messages about use of mboot/QSPI flash. 2019-06-24 21:59:58 +10:00
Damien George 38bcc99a58 stm32/usbd_msc: Provide Mode Sense response data in MSC interface.
Eventually these responses could be filled in by a function to make their
contents dynamic, depending on the attached logical units.  But for now
they are fixed, and this patch fixes the MODE SENSE(6) responses so it is
the correct length with the correct header.
2019-06-11 15:43:59 +10:00
Damien George 518aa571ab stm32/usbd_msc: Rework USBD MSC code to support multiple logical units.
SCSI can support multiple logical units over the one interface (in this
case over USBD MSC) and here the MSC code is reworked to support this
feature.  At this point only one LU is used and the behaviour is mostly
unchanged from before, except the INQUIRY result is different (it will
report "Flash" for both flash and SD card).
2019-06-11 15:43:15 +10:00
Damien George fed4c23590 stm32: Integrate optional mbedTLS component for ussl module.
To use it a board should define MICROPY_PY_USSL=1 and MICROPY_SSL_MBEDTLS=1
at the Makefile level.  With the provided configuration it adds about 64k
to the build.
2019-06-05 15:37:31 +10:00
Damien George 8b7409c295 stm32: Integrate in the cyw43 driver and network.WLAN class.
Enable it by setting MICROPY_PY_NETWORK_CYW43=1 at the Makefile level.
2019-06-03 17:14:34 +10:00
Damien George 97753a1bbc stm32: Move factory reset files and code to separate source file.
The new function factory_reset_make_files() populates the given filesystem
with the default factory files.  It is defined with weak linkage so it can
be overridden by a board.

This commit also brings some minor user-facing changes:

- boot.py is now no longer created unconditionally if it doesn't exist, it
  is now only created when the filesystem is formatted and the other files
  are populated (so, before, if the user deleted boot.py it would be
  recreated at next boot; now it won't be).

- pybcdc.inf and README.txt are only created if the board has USB, because
  they only really make sense if the filesystem is exposed via USB.
2019-05-07 13:59:51 +10:00
Damien George aa7b32c811 stm32/dac: Rework DAC driver to use direct register access.
This patch makes the DAC driver simpler and removes the need for the ST
HAL.  As part of it, new helper functions are added to the DMA driver,
which also use direct register access instead of the ST HAL.

Main changes to the DAC interface are:

- The DAC uPy object is no longer allocated dynamically on the heap,
  rather it's statically allocated and the same object is retrieved for
  subsequent uses of pyb.DAC(<id>).  This allows to access the DAC objects
  without resetting the DAC peripheral.  It also means that the DAC is only
  reset if explicitly passed initialisation parameters, like "bits" or
  "buffering".

- The DAC.noise() and DAC.triangle() methods now output a signal which is
  full scale (previously it was a fraction of the full output voltage).

- The DAC.write_timed() method is fixed so that it continues in the
  background when another peripheral (eg SPI) uses the DMA (previously the
  DAC would stop if another peripheral finished with the DMA and shut the
  DMA peripheral off completely).

Based on the above, the following backwards incompatibilities are
introduced:

- pyb.DAC(id) will now only reset the DAC the first time it is called,
  whereas previously each call to create a DAC object would reset the DAC.
  To get the old behaviour pass the bits parameter like: pyb.DAC(id, bits).

- DAC.noise() and DAC.triangle() are now full scale.  To get previous
  behaviour (to change the amplitude and offset) write to the DAC_CR (MAMP
  bits) and DAC_DHR12Rx registers manually.
2019-04-24 15:51:19 +10:00
Damien George 7ce2a08231 stm32: Add support for MMC driver, exposed via pyb.MMCard class.
Enable it via MICROPY_HW_ENABLE_MMCARD.
2019-04-01 17:04:43 +11:00
Boris Vinogradov 6947dff7da stm32/Makefile: Allow to override CROSS_COMPILE with included Makefile. 2019-03-29 11:34:05 +11:00
Damien George c7d19dc0ad ports/{stm32,esp8266}: Set mpy-cross native arch for frozen native code. 2019-03-14 12:22:49 +11:00
Andrew Leech 89ff506513 py: Update and rework build system for including external C modules.
How to use this feature is documented in docs/develop/cmodules.rst.
2019-03-08 22:58:42 +11:00
Damien George b5f33ac2cb ports: Update to work with new oofatfs version. 2019-03-05 15:56:39 +11:00
Damien George 78fe979d7d stm32: Use global lwip build config and support building without lwip. 2019-03-04 23:33:02 +11:00
Damien George c8bbf2c170 stm32/Makefile: Allow a board to specify its linker sections for FW.
A board can now use the make variables TEXT0_SECTIONS and TEXT1_SECTIONS to
specify the linker sections that should go in its firmware.  Defaults are
provided which give the existing behaviour.
2019-03-04 22:26:55 +11:00
Damien George c55709bf29 stm32/network_lan: Add high-level network.LAN interface to ETH driver. 2019-02-26 23:32:19 +11:00
Damien George c950a1a35d stm32/eth: Add low-level Ethernet MAC driver. 2019-02-26 23:32:19 +11:00
Damien George 7b2dc96251 stm32/boards/make-pins.py: Add cmdline options to support use by mboot. 2019-02-14 13:35:39 +11:00
Damien George e6d97e8a0b stm32: Move gchelper assembler code to lib/utils for use by other ports. 2019-02-12 14:11:21 +11:00
Tobias Badertscher 372e7a4dc6 stm32: Implement UART.irq() method with initial support for RX idle IRQ. 2018-12-29 17:21:37 +11:00
Damien George a2271532be stm32: Split out UART Python bindings from uart.c to machine_uart.c. 2018-12-10 16:21:50 +11:00
Damien George dff14c740b stm32/powerctrl: Move function to set SYSCLK into new powerctrl file.
Power and clock control is low-level functionality and it makes sense to
have it in a dedicated file, at least so it can be reused by other parts of
the code.
2018-09-24 14:18:18 +10:00
Andrew Leech 84f4d58479 stm32/dcmi: Add F4/F7/H7 hal files and dma definitions for DCMI periph. 2018-09-21 12:12:49 +10:00
Damien George 56f275c0a2 stm32/Makefile: Include copysign.c in double precision float builds.
This is required for DEBUG=1 builds when MICROPY_FLOAT_IMPL=double.

Thanks to Andrew Leech.
2018-09-20 16:51:20 +10:00
Andrew Leech 17f7c683d2 stm32: Add support for STM32F765xx MCUs.
This part is functionally similar to STM32F767xx (they share a datasheet)
so support is generally comparable.  When adding board support the
stm32f767_af.csv and stm32f767.ld should be used.
2018-09-20 15:16:03 +10:00
Damien George 47550ef2cd stm32: For MCUs that have PLLSAI allow to set SYSCLK at 2MHz increments.
MCUs that have a PLLSAI can use it to generate a 48MHz clock for USB, SDIO
and RNG peripherals.  In such cases the SYSCLK is not restricted to values
that allow the system PLL to generate 48MHz, but can be any frequency.
This patch allows such configurability for F7 MCUs, allowing the SYSCLK to
be set in 2MHz increments via machine.freq().  PLLSAI will only be enabled
if needed, and consumes about 1mA extra.  This fine grained control of
frequency is useful to get accurate SPI baudrates, for example.
2018-09-11 16:42:57 +10:00
Andrew Leech 670a2a3396 stm32/Makefile: Allow external BOARD_DIR directory to be specified.
This makes it easy to add a custom board definition outside of the
micropython tree, keeping the micropython submodule clean and official.
2018-09-11 15:15:21 +10:00
Damien George 8300be6d0f stm32/spi: Split out pyb.SPI and machine.SPI bindings to their own files
The aim here is to have spi.c contain the low-level SPI driver which is
independent (not fully but close) of MicroPython objects and methods, and
the higher-level bindings are separated out to pyb_spi.c and machine_spi.c.
2018-08-14 17:11:07 +10:00
Damien George f6f6452b6f stm32/Makefile: Use -Wno-attributes for ll_usb.c HAL source file.
A recent version of arm-none-eabi-gcc (8.2.0) will warn about unused packed
attributes in USB_WritePacket and USB_ReadPacket.  This patch suppresses
such warnings for this file only.
2018-07-30 15:35:05 +10:00
Andrew Leech a1db1506a2 stm32/sdram: Integrate SDRAM driver into rest of code.
If SDRAM is configured and enabled for a board then it is used for the
MicroPython GC heap.
2018-07-23 23:14:23 +10:00
Andrew Leech 4343c9330e stm32: Add method for statically configuring pin alternate function.
Works with pins declared normally in mpconfigboard.h, eg. (pin_XX), as well
as (pyb_pin_XX).

Provides new mp_hal_pin_config_alt_static(pin_obj, mode, pull, fn_type)
function declared in pin_static_af.h to allow configuring pin alternate
functions by name at compile time.
2018-07-20 14:03:21 +10:00
Damien George 5042d98514 stm32/Makefile: Rebuild all qstrs when any board configuration changes. 2018-06-12 13:53:43 +10:00
Damien George 7d86ac6c01 stm32: Add network driver for Wiznet5k using MACRAW mode and lwIP.
The Wiznet5k series of chips support a MACRAW mode which allows the host to
send and receive Ethernet frames directly.  This can be hooked into the
lwIP stack to provide a full "socket" implementation using this Wiznet
Ethernet device.  This patch adds support for this feature.

To enable the feature one must add the following to mpconfigboard.mk, or
mpconfigport.mk:

    MICROPY_PY_WIZNET5K = 5500

and the following to mpconfigboard.h, or mpconfigport.h:

    #define MICROPY_PY_LWIP (1)

After wiring up the module (X5=CS, X4=RST), usage on a pyboard is:

    import time, network
    nic = network.WIZNET5K(pyb.SPI(1), pyb.Pin.board.X5, pyb.Pin.board.X4)
    nic.active(1)
    while not nic.isconnected():
        time.sleep_ms(50) # needed to poll the NIC
    print(nic.ifconfig())

Then use the socket module as usual.

Compared to using the built-in TCP/IP stack on the Wiznet module, some
performance is lost in MACRAW mode: with a lot of memory allocated to lwIP
buffers, lwIP gives Around 750,000 bytes/sec max TCP download, compared
with 1M/sec when using the TCP/IP stack on the Wiznet module.
2018-06-01 14:21:38 +10:00
Damien George ea7e747979 stm32: Add support for STM32F0 MCUs. 2018-05-28 21:49:49 +10:00
Damien George cda964198a stm32: Integrate lwIP as implementation of usocket module.
This patch allows to use lwIP as the implementation of the usocket module,
instead of the existing socket-multiplexer that delegates the entire TCP/IP
layer to the NIC itself.

This is disabled by default, and enabled by defining MICROPY_PY_LWIP to 1.

When enabled, the lwIP TCP/IP stack will be included in the build with
default settings for memory usage and performance (see
lwip_inc/lwipopts.h).  It is then up to a particular NIC to register itself
with lwIP using the standard lwIP netif API.
2018-05-21 17:36:06 +10:00
Damien George aea71dbde0 stm32/Makefile: Use -O2 to optimise compilation of lib/libc/string0.c. 2018-05-04 15:53:51 +10:00
Damien George 19778d0a3c stm32/i2c: Add low-level I2C driver for F7 MCUs. 2018-04-24 23:48:04 +10:00
Damien George b73adcc3d9 stm32: Rename i2c.c to pyb_i2c.c.
i2c.c implements the legacy pyb.I2C class so rename the file to make this
explicit, and also to make room for an improved I2C driver.
2018-04-24 16:23:36 +10:00
Damien George d9e69681f5 stm32: Add custom, optimised Reset_Handler code.
The Reset_Handler needs to copy the data section and zero the BSS, and
these operations should be as optimised as possible to reduce start up
time.  The versions provided in this patch are about 2x faster (on a Cortex
M4) than the previous implementations.
2018-03-29 15:29:23 +11:00
Damien George 04de9e33bc stm32/system_stm32: Set VTOR pointer from TEXT0_ADDR. 2018-03-27 21:32:39 +11:00
Damien George ed75b2655f stm32/Makefile: Allow a board to config either 1 or 2 firmware sections.
This patch forces a board to explicitly define TEXT1_ADDR in order to
split the firmware into two separate pieces.  Otherwise the default is now
to produce only a single continuous firmware image with all ISR, text and
data together.
2018-03-27 21:24:15 +11:00
Damien George 95b2cb008e stm32/Makefile: Rename FLASH_ADDR/TEXT_ADDR to TEXT0_ADDR/TEXT1_ADDR.
To make it clearer that these addresses are both for firmware text and that
they have a prescribed ordering.
2018-03-27 21:20:04 +11:00
Damien George 7aec06ca9a stm32/boards: Allow boards to have finer control over the linker script.
This patch allows a particular board to independently specify the linker
scripts for 1) the MCU memory layout; 2) how the different firmware
sections are arranged in memory.  Right now all boards follow the same
layout with two separate firmware section, one for the ISR and one for the
text and data.  This leaves room for storage (filesystem data) to live
between the firmware sections.

The idea with this patch is to accommodate boards that don't have internal
flash storage and only need to have one continuous firmware section.  Thus
the common.ld script is renamed to common_ifs.ld to make explicit that it
is used for cases where the board has internal flash storage.
2018-03-27 21:17:48 +11:00