a061729dcc
Update ports/espressif/boards/m5stack_atom_matrix/sdkconfig
2023-01-02 10:41:25 -05:00
f5c0996fb7
Update ports/espressif/boards/m5stack_atom_echo/sdkconfig
2023-01-02 10:41:11 -05:00
01f6762aa1
Update ports/espressif/boards/m5stack_atom_u/sdkconfig
2023-01-02 10:40:49 -05:00
4fe00ef74a
Added M5Stack Atom U
2022-12-31 06:21:49 +00:00
dec0b272fe
Fixed I2C bus definition
2022-12-30 23:21:46 +00:00
58e32bd2cb
Fixed speacker and microphone pins definition
2022-12-30 23:09:38 +00:00
52ee5a9272
Added M5Stack Atom Echo
2022-12-30 20:21:00 +00:00
42195a4a29
Added M5Stack Atom Matrix board
2022-12-30 17:37:37 +00:00
a932fb3fb1
Update pins.c
...
also match lolin_c3_mini pins definition of new version
2022-12-28 21:25:25 +08:00
88d0eba7f4
Merge pull request #7258 from m1cha1s/ESP32DevKitV1
...
Esp32 dev kit v1
2022-12-24 09:12:45 -05:00
7cfdd24f77
Change flash mode to dio
2022-12-22 09:30:52 +09:00
e80ff20583
Remove IO11 from definition
...
It is used internally on this particular board version despite being broken out to a pin and marked on silkscreen.
2022-12-22 09:29:24 +09:00
aac324c4d1
added frozen modules, changed to 8BM FLASH
2022-12-18 22:49:28 +00:00
68d510cb2f
Update mpconfigboard.h
...
Configure LED pin for STATUS display and to prevent ESP floating pins from constantly lighting led dimly.
2022-12-07 23:00:09 -05:00
676e40d62f
Merge pull request #7311 from dhalbert/esp32-box-lite-sdkconfig
...
make esp32-box-lite sdkconfig same as box
2022-12-06 21:31:45 -05:00
3965ef9c2a
make esp32-box-lite sdkconfig same as box
2022-12-06 19:27:00 -05:00
eaf39b4c10
Update pins.c
2022-12-05 16:40:36 +09:00
14b430ed35
Fix pre-commit issues
2022-12-05 16:35:48 +09:00
5b6f06d84c
Add additional files
2022-12-05 16:08:12 +09:00
05a8bf8c38
Create board.c
2022-12-05 16:06:50 +09:00
b5dda0b770
Removed esp32_devkit_v1 folder
2022-12-02 14:26:46 +01:00
d904d8e9a0
Renamed the board folder to doit_esp32_devkit_v1
2022-11-30 20:26:41 +01:00
680e56c52a
Changed creator id
2022-11-25 14:09:35 +01:00
26fbb25653
Fixed formatting
2022-11-25 13:55:06 +01:00
fb46e7c4d8
Defined esp32 board for the esp32 devkit v1
2022-11-25 12:13:44 +01:00
85a83b8150
Simplify some ESP32-C3 board sdkconfig files
2022-11-21 12:35:10 -05:00
3a418379d3
Merge branch 'main' of origin into ESP32-S3-DevKitC-1-N32R8
2022-11-18 09:40:20 +05:30
f9f1edbb08
setup PWM status LED on aithinker ESP32-C3 boards
2022-11-17 20:32:50 +01:00
12545fb060
Add prototype feather esp32s2/s3 reverse tft board definition
...
This is not final hardware and may change!
2022-11-15 20:22:20 -06:00
43566dec5b
allow inclusion of board while blocking build files
2022-11-13 12:13:32 +00:00
6c3b9b64da
add crcibernetica-ideaboard
2022-11-12 03:22:15 +00:00
11ce074318
Update mpconfigboard.mk
2022-11-08 23:43:13 +01:00
a568a5c2e2
Rename sdkonfig to sdkconfig
2022-11-06 22:14:19 +01:00
f1e658f8bb
Update sdkonfig
2022-11-06 22:07:12 +01:00
882100a87a
Create sdkonfig
2022-11-02 22:10:44 +01:00
71b5e6088b
Update mpconfigboard.mk
2022-11-02 22:07:28 +01:00
d6fe378456
Update mpconfigboard.h
2022-11-02 22:05:39 +01:00
9b1181804c
Merge branch 'adafruit:main' into main
2022-10-30 19:16:05 +01:00
468709abcc
Update pins.c
...
Hopefully last change nefore merge.
2022-10-30 18:51:46 +01:00
ae8f415bd5
Update board.c
2022-10-30 02:17:38 +02:00
0aa41fa92e
change BOARD_USER_SAFE_MODE_ACTION into a separate sentence
2022-10-30 01:55:42 +02:00
934d2a7004
remove duplicate press boot button, it's already the default
2022-10-30 01:52:17 +02:00
5d7c58da5d
Update pins.c
...
Attempt to fix build issue
2022-10-30 01:52:09 +02:00
a064b52ad7
CIRCUITPY_ESP32_CAMERA, not CIRCUITPY_USB_CAMERA
2022-10-29 10:13:11 -04:00
2ffd16a10c
Update mpconfigboard.mk
2022-10-29 09:27:09 -04:00
19fd9107a2
Merded with main branch
2022-10-29 07:46:54 +00:00
7282bd9c9a
Removed boilerplate already handled by MP_WEAK definitions
...
Co-authored-by: Dan Halbert <halbert@halwitz.org>
2022-10-29 09:34:45 +02:00
053d0fa8b5
Merge pull request #7145 from chukwon/fix_lolin_s3
...
fix and add lolin_s3 pins definition
2022-10-28 23:50:53 -04:00
9c66320474
fix and add lolin_s3 pins definition
2022-10-28 21:40:35 +08:00
b815a4cc5e
Added safe mode button and fix coyright attribution
2022-10-28 12:06:11 +00:00
27142d090b
Fixed copyright attribution
2022-10-28 11:08:30 +00:00
b276ed7af9
Fixed copyright attribution
2022-10-28 05:32:09 +00:00
b94447fde5
Added safe mode button
2022-10-28 05:00:54 +00:00
8fe44a23d2
Merge pull request #7140 from dhalbert/esp32-s3-box-spiram-fix
...
correct SPIRAM settings for ESP32-S3-BOX
2022-10-27 16:09:59 -04:00
26688fa826
correct SPIRAM settings for ESP32-S3-BOX
2022-10-27 14:45:29 -04:00
baa44a2dba
Merge pull request #7133 from CDarius/fix_m5stack_core_basic
...
Fixed wrong configuration in sdkconfig
2022-10-27 18:34:07 +05:30
d774f3d34f
Update board.c
...
Fix for CLI
2022-10-27 15:02:44 +02:00
0e0c106740
Add Maker badge board
2022-10-27 01:06:38 +02:00
cdbad53649
Fixed wrong configuration in sdkconfig
2022-10-26 20:06:27 +00:00
be07722bbc
Added board M5Stack Atom Lite
2022-10-26 19:57:23 +00:00
5ebdf281cb
Merge pull request #7125 from dhalbert/esp-pin-alarm-fix
...
Fix setup of Espressif PinAlarms
2022-10-26 15:24:58 -04:00
366cf4a048
Merge pull request #7113 from CDarius/m5stack_core_fire
...
Added M5Stack Core Fire board
2022-10-26 09:10:50 -05:00
e49cd00d60
fix debug UART pins on Metro ESP32-S2
2022-10-25 20:41:08 -04:00
f6e2369bbd
Removed not available UART in board
2022-10-25 16:53:42 +00:00
f9983ff556
Added M5Stack Core Basic board
2022-10-25 16:42:14 +00:00
c8191e8830
Better pins definitions
2022-10-25 11:41:39 +00:00
5fa67548ea
Added missing sdkconfig file
2022-10-24 20:03:06 +00:00
39171d7626
Removed unnecessary compiler flags
2022-10-24 19:21:26 +00:00
beab76c325
Added M5Stack Core Fire board
2022-10-24 18:38:30 +00:00
3c5bf4e852
Update ports/espressif/boards/m5stack_stamp_c3/mpconfigboard.mk
...
Co-authored-by: MicroDev <70126934+MicroDev1@users.noreply.github.com>
2022-10-22 16:23:27 +02:00
d147712522
Add M5 Stamp C3 board
2022-10-22 00:45:54 +02:00
5114ae7a31
fix `2MB-no-uf2` partition table
2022-10-17 19:44:08 +05:30
fc00a6675e
Added some pin definitions to match with the Arduino core.
2022-10-14 17:25:24 +08:00
822e806f03
Merge pull request #7031 from BPI-STEAM/CircuitPython-main-bpi-picow-dev
...
Add BananaPi BPI-PicoW-S3 .
2022-10-11 22:53:37 -04:00
376df8ec7e
Add BananaPi BPI-PicoW-S3 .
...
Adds support for the BananaPi BPI-PicoW-S3 Boards.
Based on esp32s3 chip.
With one WS2812 LED, one monochrome LED, one ceramic antenna.
Support double-reset to tinyUF2.
2022-10-12 09:11:25 +08:00
4f753251db
cleanup `mpconfigboard.mk` of espressif boards
...
- move `INTERNAL_FLASH_FILESYSTEM` to `mpconfigport.mk`
- move `LONGINT_IMPL` to `mpconfigport.mk`
- move `CFG_TUD_TASK_QUEUE_SZ` to `Makefile`
2022-10-06 16:15:01 +05:30
296960dd89
shorten board.c
2022-10-05 20:23:19 -04:00
d31acdef6c
we don't use AUTORESET_DELAY_MS
2022-10-06 02:19:48 +02:00
dd5f9411c8
Merge branch 'adafruit:main' into main
2022-10-05 13:44:12 -05:00
02e115cbc2
Update mpconfigboard.mk
2022-10-04 00:03:59 -05:00
330b96726a
add newlines to end of files
2022-10-04 04:56:31 +00:00
5268ef01c9
Utilize VID/PID from native USB port
2022-10-03 23:45:28 -05:00
cffc1bfcab
sdkconfig didn't get committed for some reason...
2022-10-03 22:54:31 -05:00
a948dc399b
add esp32-s2-devkitc-1-n8r2 variant
2022-10-04 03:51:51 +00:00
90f6096955
fix ai-thinker creation ids; fix some typos elsewhere
2022-10-03 15:29:03 -04:00
9d1b12066d
Espressif: do not hold pins during deep sleep if not necessary
2022-09-29 20:11:48 -04:00
a769beed3f
Use new unique ID for this board
2022-09-22 16:23:38 -05:00
1091d51af2
Merge pull request #6918 from UnexpectedCircuitPython/main
...
Added support for Unexpected Maker TinyPICO (V2/V3) and TinyPICO Nano
2022-09-17 21:39:17 -04:00
268b3f0dde
Added support for Unexpected Maker TinyPICO (V2/V3) and TinyPICO Nano boards using ESP32-PICO-D4
2022-09-18 09:49:30 +10:00
b2ffda219a
updated a pin definition
2022-09-17 16:53:24 -04:00
4a69dfa50c
Merge pull request #6907 from dhalbert/preserve-pins-on-deep-sleep
...
allow preserving pin state during deep sleep
2022-09-16 17:52:04 +05:30
4df8a51982
Remove unneeded workaround for Feather ESP32-S2 TFT
2022-09-15 20:06:47 -04:00
60f43b1703
allow preserving pin state during deep sleep
2022-09-15 17:35:14 -04:00
56c5f1eedf
Add BananaPi BPI-Leaf-S3.
...
Based on esp32s3, all available pins are drawn.
2M PSRAM, 8M FLASH.
A JST SH 4-pin Connector can be used for STEMMA QT / Qwiic.
A MX 1.25mm 2-Pin Connector Lithium battery power supply.
A WS2812 LED.
2022-09-15 14:18:24 +08:00
14fc4a0797
Merge pull request #6898 from dhalbert/espressif-pwmout-reset
...
Espressif pwmout reset fixes
2022-09-14 18:47:05 -04:00
ae64f9fd78
Merge pull request #6899 from BPI-STEAM/CircuitPython-main-BPI-BIT-S2-PR
...
Add BananaPi BPI-Bit-S2 .
2022-09-13 23:02:46 -04:00
6f4cc611ed
Add BananaPi BPI-Bit-S2 .
...
Adds support for the BananaPi BPI-Bit-S2 Boards.
Based on esp32s2 chip.
With 25 ws2812 LEDs, 1 buzzer, 2 photosensitive sensors, 1 thermosensitive sensor,
2 buttons on the front, 1 reset button and 1 boot button on the back.
2022-09-14 10:21:23 +08:00
14adfb16dd
avoid pwmout_reset() workaround by reordering in main(); remove unnecessary never-resets
2022-09-12 21:32:21 -04:00
d0d10179c2
fix logic in pwmout_reset()
2022-09-12 17:03:45 -04:00
c157f1cb39
Cast pin_number to int8_t so that it can be used with switch-case.
2022-09-12 18:56:15 +08:00
0ae015e4d9
Removed whitespaces.
2022-09-12 18:25:27 +08:00
aaa2be1200
Set the default pin state for GPIOs to pull down.
2022-09-12 18:19:33 +08:00
36221bd749
update board microdev_micro_c3
2022-09-11 13:31:38 +05:30
2fbb3090e2
Changed the pins assignment.
2022-09-09 16:50:14 +08:00
58b00467c4
Merge pull request #6878 from dhalbert/weak-board-defs
...
Use MP_WEAK for default board.c routines
2022-09-08 10:47:08 -04:00
4cb69a51d5
Use MP_WEAK for default board.c routines
2022-09-08 07:36:50 -04:00
6c4f352533
Fixed incorrect IO naming for ProS3 and FeatherS3
2022-09-07 19:51:45 +10:00
14498f793d
Merge pull request #6859 from wemos/s3_cpython
...
Add LOLIN S3 ESP32-S3 board.
2022-09-04 13:10:52 -04:00
ca7fb6dede
removal of sda-scl and add "GP" to 40,41
2022-09-04 18:05:50 +03:00
e1891038c8
Forgor the one IO pin and sda-scl
2022-09-04 16:59:56 +03:00
3a18d285a2
Add LOLIN S3 ESP32-S3 board.
2022-09-03 11:06:51 +08:00
8ed6a6135a
Disable camera on boards without psram
2022-08-26 09:27:50 -05:00
528da05f54
Add Waveshare ESP32-S2-Pico-LCD
2022-08-15 16:46:14 +02:00
2f2ccdddbf
pycam rev b pins
2022-08-13 23:41:35 -04:00
df1435ae94
Audit all boards with LED pins defined
...
Add them as MICROPY_HW_LED_STATUS so that we can share reset code
for them. They aren't actually used for the status if another RGB
option is available. (But maybe they should be.)
Fixes #6717
2022-08-11 14:41:20 -07:00
198c8fea11
merge from upstream and fix espressif_esp32s3_eye
2022-08-10 08:43:08 -04:00
02cc6c2aee
Merge remote-tracking branch 'adafruit/main' into remove-autobrightness
2022-08-10 08:35:53 -04:00
41bcd7b260
Remove support for auto-brightness
2022-08-09 22:40:21 -04:00
59b4353282
Merge pull request #6713 from tannewt/exception_filename
...
Add exception filename to title bar
2022-08-09 16:59:12 -07:00
554063a817
Merge branch 'main' into espressif-camera-2
2022-08-09 14:07:14 -07:00
5084de1b73
Merge pull request #6708 from strid3r21/main
...
Added Smart Bee Design Boards
2022-08-09 14:06:11 -07:00
b3b27a1d80
Remove extra leading spaces
2022-08-09 10:45:47 -07:00
556d01a685
Remove extra newline at end of file
2022-08-09 10:44:57 -07:00
ce1273be7a
Pull Feather S2 TFT LED down on reset
2022-08-09 10:42:56 -07:00
ec839d6f90
these items should not have been disabled
2022-08-09 11:42:19 -05:00
f87e34b9ed
add shutter button
2022-08-09 11:42:19 -05:00
10275001ac
enable web workflow on Feather HUZZAH32
2022-08-09 07:26:18 -04:00
15ad24ba62
ran pre-commit.
2022-08-09 04:32:21 -04:00
2cd9222e5e
add includes
2022-08-07 14:32:29 -04:00
029b6b6fbe
add default display
2022-08-07 14:12:40 -04:00
a6eadd6259
Added Bee Motion S3 board
2022-08-07 11:59:43 -04:00
f39058edc4
Added Bee S3 board
2022-08-06 22:22:20 -04:00
1da8065d6b
Merge remote-tracking branch 'origin/main' into espressif-camera-2
2022-08-05 16:38:51 -05:00
3f49d77036
Improve esp32-s3-eye board definition
2022-08-05 13:10:21 -05:00
125b276af0
Get CIRCUITPY FATFS directly.
...
Otherwise, you may actually get a non-root filesystem.
Fixes #6575
2022-08-04 16:06:27 -07:00
861fa9625d
Add the ESP32-EYE aka ESP-EYE
2022-08-04 15:12:12 -05:00
0e26a937cc
Disable camera everywhere it doesn't fit
2022-08-04 15:12:08 -05:00
69949ecb43
update PID for this board
2022-08-04 15:11:56 -05:00
b903a020fd
Enable display on esp32-s3-eye
2022-08-04 15:11:52 -05:00
8d673bdbf5
reserve 1MB of PSRAM for camera framebuffer on esp32s3-eye
...
.. this setting can be overridden with a bigger or smaller value in
CIRCUITPY/.env but 1/8 of PSRAM seems like a good initial value. It's
enough to store a single 800x600 or 640x480 RGB565 frame, or multiple
smaller frames such as 320x240.
2022-08-04 15:11:51 -05:00
5db6db0128
add esp32-camera
...
This uses the esp32-camera code instead of our own homebrewed camera code.
In theory it supports esp32, esp32-s2 and esp32-s3, as long as they have
PSRAM.
This is very basic and doesn't support changing any camera parameters,
including switching resolution or pixelformat.
This is tested on the Kaluga (ESP32-S2) and ESP32-S3-Eye boards.
First, reserve some PSRAM by putting this line in `CIRCUITPY/_env`:
```
CIRCUITPY_RESERVED_PSRAM=524288
```
and hard-reset the board for it to take effect.
Now, the following script will take a very low-resolution jpeg file and print
it in the REPL in escape coded form:
```python
import board
import esp32_camera
c = esp32_camera.Camera(
data_pins=board.CAMERA_DATA,
external_clock_pin=board.CAMERA_XCLK,
pixel_clock_pin=board.CAMERA_PCLK,
vsync_pin=board.CAMERA_VSYNC,
href_pin=board.CAMERA_HREF,
pixel_format=esp32_camera.PixelFormat.JPEG,
i2c=board.I2C(),
external_clock_frequency=20_000_000)
m = c.take()
if m is not None:
print(bytes(m))
```
Then on desktop open a python repl and run something like
```python
>>> with open("my.jpg", "wb") as f: f.write(<BIG PASTE FROM REPL>)
```
and open my.jpg in a viewer.
2022-08-04 15:11:50 -05:00
8e08cc38f8
Add default I2C bus to Kaluga
2022-08-04 15:11:48 -05:00
e0cb8ef17e
Merge pull request #6694 from dhalbert/esp32-no-psram
...
ESP32 no psram support; other ESP32 cleanup
2022-08-04 11:49:39 -07:00
3707b54e3b
Merge pull request #6672 from bill88t/main
...
Add Waveshare ESP32-S2-Pico
2022-08-04 11:09:59 -07:00
202fac59f8
ESP32 fixes for no PSRAM; some cleanup
2022-08-04 13:44:52 -04:00
d4e8c19b49
merge from main
2022-08-04 12:43:23 -04:00
68bb6b9988
ran precommit
2022-08-03 09:14:26 +03:00
efa3e40f90
Add the one obtained from esp
2022-08-03 08:48:28 +03:00
534a482d94
initial HUZZAH32 bring-up, with hacked pins
2022-08-02 21:47:46 -04:00
74e841d835
Read fuses to know what flash and ram pins to never reset
2022-08-02 12:01:42 -07:00
60429f51c7
Add official vid/pid
2022-08-02 09:43:17 +03:00
f0c6a8c49a
Odroid pin defs
2022-08-01 15:52:08 -07:00
9661d3256c
Add more ESP32 boards and enable web workflow
2022-08-01 15:52:08 -07:00
c71cc4e0dd
Add Waveshare ESP32-S2-Pico
2022-07-30 15:35:48 +03:00
d6344812e8
Lots of web workflow, C3 and title bar fixes
...
* Fixes #6221 - C3 hang on `import wifi`. Enabling the WiFi PHY was
disabling USB. Now boards that use it set CONFIG_ESP_PHY_ENABLE_USB
explicitly.
* Fixes #6655 - Allows pasting into the web serial page. Fixes reading
more than 0xf bytes at a time.
* Fixes #6653 - Fixes web socket encoding of payloads >125 bytes. Can
happen when printing a long string.
* Fixes C3 responsiveness when waiting for key to enter REPL. (It
now correctly stops sleeping.)
* Disables title bar updates when in raw REPL. Related to #6548 .
* Adds version to title bar.
2022-07-28 16:06:56 -07:00
3817d007aa
clean up esp32 sdkconfigs
2022-07-28 17:52:27 -04:00
c29fa9012d
Merge pull request #6645 from prplz/seeed_xiao_esp32c3
...
Add board: seeed_xiao_esp32c3
2022-07-28 11:22:43 -07:00
ddeb833a3a
Shrink Feather S3 4mb build with -Os
2022-07-28 07:43:39 -07:00
555bf7cc12
Add board: seeed_xiao_esp32c3
2022-07-28 22:48:03 +10:00
2a9d3c5ed2
Adds BOOT0 (GPIO 0) as a named pin for MagTag.
2022-07-27 08:38:52 -04:00
47f718aa92
Merge pull request #6615 from askpatrickw/beetle-esp32-c3
...
Beetle esp32 c3
2022-07-25 15:00:05 -07:00
e877644012
use -Os on Feather ESP32-S3 TFT to shrink build
2022-07-19 17:45:29 -04:00
1e99d68af7
Add Creator ID
2022-07-17 12:38:27 -07:00
71c22232f0
board config compelted
2022-07-17 11:48:45 -07:00
c2a8ef752c
Remove ps2io to make space
2022-07-15 14:01:50 -07:00
ac460dd1e1
Merge branch 'main' into esp32
2022-07-13 15:30:53 -07:00
08b4a64bd2
Update the PID
2022-07-11 08:39:10 -07:00
bc14b7ad47
Fix the display on the esp box lite
2022-07-08 15:40:59 -07:00
c316b950c7
merge from adafruit/main
2022-07-08 15:42:19 -04:00
d869b441f4
further ESP32 sdkconfig fixes; add CIRCUITPY_STATUS_BAR
2022-07-08 15:27:00 -04:00
76e32dcf93
remove need for CIRCUITPY_ESP_PSRAM
2022-07-08 14:54:55 -04:00
afbf4de071
Uncomment or remove debugging changes
2022-07-08 12:53:25 -04:00
c3cd32e773
CPU freq to 240 MHz, redo sdkconfigs
2022-07-08 10:50:00 -04:00
75208573f4
tweak sdkconfig; add temp logging to mp_make_function_from_raw_code
2022-07-08 09:53:29 -04:00
4e88d795e1
Thonny causing crash emitglue.c:199:
2022-07-06 23:01:19 -04:00
d83720f659
Tweak display init
2022-07-05 17:02:52 -07:00
cd77517b2f
Add build for ESP32-S3 Box Lite
2022-07-05 16:35:42 -07:00
c3cf9ba9ce
remove wifi max from sdkconfig
2022-07-01 14:50:47 -07:00
aaeda97818
update PHY section, correct name
2022-07-01 14:50:47 -07:00
aa53d36934
setting CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER to 8.5
2022-07-01 14:50:47 -07:00
7e367eeb58
Update "D" mappings
2022-07-01 14:50:47 -07:00
d4b26daf1b
correct creator and creation IDs
2022-07-01 14:50:47 -07:00
6c7faf0eba
Change USB VID & PID to Creator and Creation IDs
2022-07-01 14:50:47 -07:00
3253ae2503
tested and corrected several pins
2022-07-01 14:50:47 -07:00
f10fa566aa
REPL works. Based on QTPYC3.
2022-07-01 14:50:47 -07:00
a3070f6c2a
Changes to Pin Mappings
2022-07-01 14:50:46 -07:00
b37236f83f
C3 does not have PSRAM
2022-07-01 14:50:46 -07:00
af629ab180
Add assumed PID value
2022-07-01 14:50:46 -07:00
c1e6003d26
remove comment that breaks {ID Checker
2022-07-01 14:50:46 -07:00
9bae8549c5
add UART RX TX to mpconfigboard
2022-07-01 14:50:46 -07:00
6763b7b968
add A5
2022-07-01 14:50:46 -07:00
bcf27e146b
fix build break and add io 20/21
2022-07-01 14:50:46 -07:00
dc1c86738a
Initial pin mapping pass
2022-07-01 14:50:46 -07:00
fd4695d0f2
Gettting started with pin mapping.
2022-07-01 14:50:46 -07:00
8bb369cac5
refactor debug UART to console UART; get working on ESP32
2022-06-30 23:16:46 -04:00
b0efd130c9
ESP32 REPL working through debug UART
2022-06-29 23:19:36 -04:00
780c4963cb
wip; change never-ever reset pin mechanism
2022-06-28 23:06:49 -04:00
ca64950503
wip fixes
2022-06-28 18:32:08 -04:00
4f0a7aedfd
WIP adding devices.json and auth
2022-06-27 13:34:13 -07:00
55784c93de
wip; compiles
2022-06-26 21:22:22 -04:00
02069eb0b5
wip
2022-06-23 15:59:06 -04:00
ba72287db4
Implement default ports to IOTS2
2022-06-22 07:24:27 +02:00
6446010753
Wi-Fi autoconnect and title bar status
...
This adds support for CIRCUITPY_WIFI_SSID and CIRCUITPY_WIFI_PASSWORD
in `/.env`. When both are defined, CircuitPython will attempt to
connect to the network even when user code isn't running. If the
user code attempts to a network with the same SSID, it will return
immediately. Connecting to another SSID will disconnect from the
auto-connected network. If the user code initiates the connection,
then it will be shutdown after user code exits. (Should match <8
behavior.)
This PR also reworks the default displayio terminal. It now supports
a title bar TileGrid in addition to the (newly renamed) scroll area.
The default title bar is the top row of the display and is positioned
to the right of the Blinka logo when it is enabled. The scroll area
is now below the Blinka logo.
The Wi-Fi auto-connect code now uses the title bar to show its
state including the IP address when connected. It does this through
the "standard" OSC control sequence `ESC ] 0 ; <s> ESC \` where <s>
is the title bar string. This is commonly supported by terminals
so it should work over USB and UART as well.
Related to #6174
2022-06-09 14:55:54 -07:00
6b09f99eaa
Add back ULAB
2022-06-06 10:35:37 -07:00
80ae14202a
Merge pull request #6416 from FoamyGuy/display_brightness_pwm
...
display brightness pwm 500hz frequency
2022-06-05 23:52:42 -04:00
ac282b2a73
Merge pull request #6440 from tannewt/translate_header
...
Switch translate() to the header file
2022-06-05 23:50:47 -04:00
c149bbdcfc
Merge pull request #6447 from SimonVail/main
...
Add files via upload
2022-06-05 17:11:44 -04:00
67de89861e
new argument for feather s3 tft display init
2022-06-04 11:36:45 -05:00
260994d16e
Merge branch 'main' into display_brightness_pwm
2022-06-04 11:32:15 -05:00
cbff9dd8e3
add new argument for all boards with built-in display
2022-06-04 11:08:20 -05:00
d1cdb72020
Update ports/espressif/boards/adafruit_feather_esp32s3_4mbflash_2mbpsram/mpconfigboard.h
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2022-06-03 18:21:20 -04:00
fdb133bbe8
add adafruit_feather_esp32s3_4mbflash_2mbpsram
2022-06-02 21:09:37 -04:00
27fb96e6b0
Remove trailing whitespace
2022-06-01 21:35:01 -04:00
b2344bcde2
Update pins.c
2022-05-30 11:52:29 -04:00
f36dbb386b
Add files via upload
2022-05-30 11:47:51 -04:00
c676253834
Switch translate() to the header file
...
This allows the compile stage to optimize most of the translate()
function away and saves a ton of space (~40k on ESP). *However*, it
requires us to wait for the qstr output before we compile the rest
of our .o files. (Only qstr.o used to wait.)
This isn't as good as the current setup with LTO though. Trinket M0
loses <1k with this setup.
So, we should probably conditionalize this along with LTO.
2022-05-27 10:33:53 -07:00
99d7d0d8bb
Disable ulab for ESP32-S3 TFT
2022-05-24 14:59:34 -04:00
e22de975b3
try just bitbangio remove
2022-05-24 11:46:03 -04:00
9439ce04bd
try to remove some space?
2022-05-24 11:28:55 -04:00
bb4beb3fab
add esp32s3 tft
2022-05-23 23:57:35 -04:00
6454c5895b
Repair import and stock in under the frozen / directory
2022-05-23 11:19:11 +08:00
e5a5ffb9b0
Update board.c
2022-05-22 11:37:39 +08:00
37e376631a
Fix format issues
2022-05-22 11:22:58 +08:00
b62799a798
Add mixgo_ ce_ Serial function, repair sdkconfig
2022-05-22 10:42:56 +08:00
3e47d24fb9
Update submodule and create tag
2022-05-21 10:52:14 +08:00
4356a12504
Update mpconfigboard.mk
2022-05-20 10:55:23 +08:00
73f2621cda
Repair No newline at end of file
2022-05-20 10:38:14 +08:00
525262cd9a
Merge branch 'main' into main
2022-05-20 10:04:02 +08:00
e3896be345
Modify mixgoce_ Lib is a submodule
2022-05-20 09:46:55 +08:00
d2d08fc944
fix SPI pin names qtpy esp32s3
2022-05-13 16:48:13 -07:00
64ca3aa359
Merge pull request #6387 from SimonVail/main
...
Lilygo TTGO T-OI Plus ESP32C3
2022-05-13 18:31:50 -04:00
1f0bdad083
Update ports/espressif/boards/lilygo_ttgo_t-oi-plus/mpconfigboard.mk
...
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2022-05-13 15:02:26 -04:00
ef4d298ca8
Update pins.c
2022-05-12 17:49:48 -04:00
0d92b0a155
Update board.c
2022-05-12 17:46:49 -04:00
b1935975a2
Update board.c
2022-05-12 17:27:48 -04:00
c5db1280ee
Update mpconfigboard.mk
2022-05-12 13:21:58 -04:00
6bdd128fb3
Add files via upload
2022-05-12 13:18:39 -04:00
f69a293795
Create sdkconfig
2022-05-12 13:18:17 -04:00
a4f505dcab
Delete ports/espressif/boards/Lilygo-T-oi-Plus-ESP32C3 directory
2022-05-12 13:17:17 -04:00
0b586e9c94
Update board.c
2022-05-12 12:43:52 -04:00
6fe728a9d2
Update ports/espressif/boards/Lilygo-T-oi-Plus-ESP32C3/pins.c
...
Co-authored-by: Neradoc <Neradoc@users.noreply.github.com>
2022-05-12 11:57:59 -04:00
6908f5a97e
Update ports/espressif/boards/Lilygo-T-oi-Plus-ESP32C3/board.c
...
Co-authored-by: Neradoc <Neradoc@users.noreply.github.com>
2022-05-12 11:57:52 -04:00
b6e6ee7505
Update ports/espressif/boards/Lilygo-T-oi-Plus-ESP32C3/mpconfigboard.mk
...
Co-authored-by: Neradoc <Neradoc@users.noreply.github.com>
2022-05-12 11:57:44 -04:00
b9ea7458ab
Add files via upload
2022-05-12 11:41:53 -04:00
35d78c135a
Create sdkconfig
2022-05-12 11:41:29 -04:00
f86ebe71b6
Delete Lilygo-T-oi-Plus-ESP32C3
2022-05-12 11:40:16 -04:00
0d1740ad27
Create Lilygo-T-oi-Plus-ESP32C3
2022-05-12 11:39:39 -04:00
d4b02e22ae
Thank you. I have applied for PID in espressif
2022-05-12 09:38:13 +08:00
b9c28742be
Added newline at the end of the file.
2022-05-11 15:30:45 +08:00
466f2a3644
Updated copyright information.
2022-05-11 15:25:32 +08:00
Dan Halbert
CDario
chukwon
evildave666
root
RetiredWizard
Dan Halbert
m1cha1s
MicroDev
Neradoc
Jeff Epler
dronecz
chukwon
Neradoc
askpatrickw
Kong Wai Weng
Wind-stormger
Kyle Mohr
Seon Rozenblum
Paul Price
bill88t
wemos
Martin
lady ada
Scott Shawcroft
paul
Michael Himing
Chris Dailey
Patrick
Melissa LeBlanc-Williams
foamyguy
SimonVail
dahanzimin
大汉子民
Tod Kurt