Commit Graph

287 Commits

Author SHA1 Message Date
Damien George
4d409b8e32 stm32/boards/stm32f767.ld: Add definition of FLASH_APP.
This allows F767 MCUs to support a bootloader in the first sector.
2018-03-27 21:35:03 +11:00
Damien George
dcf4eb8134 stm32/boards: Add common_bl.ld for boards that need a bootloader. 2018-03-27 21:30:45 +11:00
Damien George
ddb3b84c70 stm32/boards: Add common_basic.ld for a board to have a single section. 2018-03-27 21:29:45 +11:00
Damien George
ed75b2655f stm32/Makefile: Allow a board to config either 1 or 2 firmware sections.
This patch forces a board to explicitly define TEXT1_ADDR in order to
split the firmware into two separate pieces.  Otherwise the default is now
to produce only a single continuous firmware image with all ISR, text and
data together.
2018-03-27 21:24:15 +11:00
Damien George
95b2cb008e stm32/Makefile: Rename FLASH_ADDR/TEXT_ADDR to TEXT0_ADDR/TEXT1_ADDR.
To make it clearer that these addresses are both for firmware text and that
they have a prescribed ordering.
2018-03-27 21:20:04 +11:00
Damien George
7aec06ca9a stm32/boards: Allow boards to have finer control over the linker script.
This patch allows a particular board to independently specify the linker
scripts for 1) the MCU memory layout; 2) how the different firmware
sections are arranged in memory.  Right now all boards follow the same
layout with two separate firmware section, one for the ISR and one for the
text and data.  This leaves room for storage (filesystem data) to live
between the firmware sections.

The idea with this patch is to accommodate boards that don't have internal
flash storage and only need to have one continuous firmware section.  Thus
the common.ld script is renamed to common_ifs.ld to make explicit that it
is used for cases where the board has internal flash storage.
2018-03-27 21:17:48 +11:00
Damien George
6b51eb22c8 stm32: Consolidate include of genhdr/pins.h to single location in pin.h.
genhdr/pins.h is an internal header file that defines all of the pin
objects and it's cleaner to have pin.h include it (where the struct's for
these objects are defined) rather than an explicit include by every user.
2018-03-27 20:25:24 +11:00
iabdalkader
7b0a020a02 stm32/boards/NUCLEO_H743ZI: Disable uSD transceiver.
There's no uSD Transceiver on this NUCLEO board.
2018-03-20 23:26:03 +11:00
iabdalkader
1e0a67f290 stm32/boards/NUCLEO_H743ZI: Enable hardware I2C support. 2018-03-20 23:25:43 +11:00
Damien George
e37b8ba5a5 stm32: Use STM32xx macros instead of MCU_SERIES_xx to select MCU type.
The CMSIS files for the STM32 range provide macros to distinguish between
the different MCU series: STM32F4, STM32F7, STM32H7, STM32L4, etc.  Prefer
to use these instead of custom ones.
2018-03-17 10:42:50 +11:00
Damien George
22a9158ced stm32/boards/STM32L476DISC: Enable CAN peripheral.
This board allows to test CAN support on the L4 series.
2018-03-15 16:32:11 +11:00
Damien George
bb3359f357 stm32/boards/STM32L476DISC: Provide SPI-flash bdev config.
This board shows how to configure external SPI flash as the main storage
medium.  It uses software SPI.
2018-03-10 00:59:43 +11:00
iabdalkader
88157715db stm32/boards: Add startup_stm32l4.s for L4 series specific startup. 2018-03-09 15:14:10 +11:00
iabdalkader
e3b81f5712 stm32/boards: Add startup_stm32f4.s for F4 series specific startup. 2018-03-09 15:14:03 +11:00
iabdalkader
d84f1a90cc stm32/boards: Add startup_stm32f7.s for F7 series specific startup. 2018-03-09 15:13:56 +11:00
iabdalkader
0f5cce7753 stm32/boards: Add startup_stm32h7.s for H7 series specific startup. 2018-03-09 15:13:13 +11:00
iabdalkader
fabfacf3d7 stm32/boards: Add new NUCLEO_H743ZI board configuration files.
USB serial and mass storage works, and the REPL is also available via the
UART through the on-board ST-LINK.
2018-03-09 15:08:11 +11:00
Damien George
8522874167 stm32/boards: Add stm32h743.ld linker script. 2018-03-09 15:08:11 +11:00
Damien George
a3c721772e stm32/boards: Add stm32h743_af.csv file describing H7 GPIO alt funcs. 2018-03-09 14:06:34 +11:00
sec2
250b24fe36 stm32/boards/NUCLEO_F767ZI: Update pins list to include 3 extra pins. 2018-03-07 18:53:02 +11:00
sec2
bda3620616 stm32/boards/stm32f767_af.csv: Add ADC column to pin capability list. 2018-03-07 18:40:06 +11:00
Damien George
34911f1a57 stm32/boards: Update all boards to work with new USB configuration. 2018-02-13 18:57:01 +11:00
Damien George
3eb0694b97 stm32: Update HAL macro and constant names to use newer versions.
Newer versions of the HAL use names which are cleaner and more
self-consistent amongst the HAL itself.  This patch switches to use those
names in most places so it is easier to update the HAL in the future.
2018-02-13 15:37:35 +11:00
Damien George
02f88cb2df stm32/boards: Remove all config options that are set to defaults.
mpconfigboard_common.h now sets the defaults so there is no longer a need
to explicitly list all configuration options in a board's mpconfigboard.h
file.
2018-02-09 18:40:40 +11:00
Damien George
6515acca70 stm32/boards/*_af.csv: Make consistent use of JTMS, JTCK, SWDIO, SWCLK.
5-pin JTAG and 2-pin SWD are logically separate interfaces so encode them
in the AF tables as separate entries (separated by /, not -).
2017-12-01 14:51:36 +11:00
Damien George
8f20231909 stm32/boards/stm32f767_af.csv: Update AF table based on datasheet.
Based on ST datasheet, DocID029041 Rev 3, DM00273119.pdf.
2017-12-01 14:48:17 +11:00
Damien George
6906255dcd stm32/boards: Remove obsolete and unused board-specific defines.
These board-level macros have been completely replaced by feature-level
config options.
2017-11-20 15:25:28 +11:00
Jaroslav Sykora
3e9e9b07ba stm32/boards: Add support for NUCLEO-F746ZG evaluation board.
This is a low-cost evaluation kit board from ST based on the STM32
Nucleo-144 form factor.  It uses the STM32F746ZG MCU in the LQFP144
package.  The MCU has 1MB of flash and 320kB of System RAM.
Cortex-M7 runs at up to 216MHz.
2017-11-20 14:42:05 +11:00
Damien George
bbac2df0cf stm32/boards/stm32f746_af.csv: Fix typos in AF table. 2017-11-20 14:19:12 +11:00
Damien George
2cafef857e stm32/boards/NUCLEO_F429ZI: Incr CPU freq to 168MHz to get USB working.
At the original frequency of 90MHz there's no way to get a 48MHz USB clock.
These new setting mirror those of the STM32F429DISC board.
2017-11-15 12:23:29 +11:00
Damien George
6f1a615427 stm32/boards: Fix typos in stm32f767_af.csv table. 2017-10-06 14:32:42 +11:00
Tobias Badertscher
bd71b3252a stm32/boards: Add new board B_L475E_IOT01A based on STM32L475. 2017-09-10 16:02:39 +10:00
Damien George
069fc48bf6 stm32/boards: Fix I2C1 pin mapping on NUCLEO_F401RE/F411RE boards.
This patch makes it consistent with the STM document describing the Arduino
layout.

Thanks to @shaoziyang for the original patch.
2017-09-06 15:41:12 +10:00
Damien George
21c889baeb stm32/boards: Change linker scripts to use "K" instead of hex byte size. 2017-09-06 15:24:08 +10:00
Damien George
81375eb470 stm32/boards: Change remaining stm32f4xx_hal_conf.h to unix line ending. 2017-09-06 15:02:21 +10:00
Damien George
4a93801c12 all: Update Makefiles and others to build with new ports/ dir layout.
Also renames "stmhal" to "stm32" in documentation and everywhere else.
2017-09-06 14:09:13 +10:00
Damien George
01dd7804b8 ports: Make new ports/ sub-directory and move all ports there.
This is to keep the top-level directory clean, to make it clear what is
core and what is a port, and to allow the repository to grow with new ports
in a sustainable way.
2017-09-06 13:40:51 +10:00