Commit Graph

230 Commits

Author SHA1 Message Date
Jeff Epler fcddfd0f39
Merge pull request #3083 from tannewt/esp32s2_busio
Add busio support for the ESP32-S2
2020-07-01 21:02:08 -05:00
Scott Shawcroft 1a0c10c328
Fix debug UART call 2020-06-29 17:15:01 -07:00
Jeff Epler 076a96ccc6
Merge pull request #3046 from jepler/same51
Add basic SAM E54  support and SAM E54 Xplained board
2020-06-25 06:55:27 -05:00
Scott Shawcroft 741e1d9828
Merge pull request #3043 from DavePutz/Issue-2865
Issue #2865 -Clean up after ctrl-c interrupt in sleep
2020-06-23 10:58:45 -07:00
DavePutz b80abf1a90
Update handing of a CTRL-C exception 2020-06-23 12:15:01 -05:00
Jeff Epler d5074220a8 atmel-samd: Add SAM E54 Xplained board
Few peripherals are actually tested.  However, USB, I2C and GPIO seem to work.

Most pins are silkscreened with the "PX00" style, so the board module
only includes the small number that are screened differently.

The default SPI, I2C, and UART are the ones on the EXT2 header.  This is
arbitrary, but the I2C on this connector is shared with the on-board I2C
devices and the PCC header, making it the most versatile.
2020-06-23 10:41:48 -05:00
DavePutz 65512cef1c
Update tick.c 2020-06-22 15:59:15 -05:00
Jeff Epler de14b5b02f flash: Correctly signal error on invalid flash read
This logic was intended to mirror what is done for "write", but
the wrong variable name was repeated twice.
2020-06-22 10:24:21 -05:00
DavePutz 182a8733a4
Rework handling of ctrl-c interrupt 2020-06-21 13:28:26 -05:00
DavePutz 0b52359190
Generate stacktrace and reset exception for ctrl-c interrupt
Added code in mp_hal_delay_ms() to generate stacktrace and reset exception for ctrl-c interrupt
2020-06-19 19:02:43 -05:00
Diego Elio Pettenò dd5d7c86d2 Fix up end of file and trailing whitespace.
This can be enforced by pre-commit, but correct it separately to make it easier to review.
2020-06-03 10:56:35 +01:00
Scott Shawcroft 323cca8910
Merge remote-tracking branch 'adafruit/master' into wdt-nrf 2020-06-01 15:18:12 -07:00
Brian Dean cf888dc02b .../devices.h: Add GigaDevices GD25S512MD 64 MiB flash chip support. 2020-05-29 15:40:56 -04:00
Scott Shawcroft 2fd7a43f2f
Merge remote-tracking branch 'adafruit/master' into wdt-nrf 2020-05-29 10:16:24 -07:00
Jeff Epler d0f9b5901e translations: document the compressed format 2020-05-28 11:30:46 -05:00
Jeff Epler fe3e8d1589 string compression: save a few bits per string
Length was stored as a 16-bit number always.  Most translations have
a max length far less.  For example, US English translation lengths
always fit in just 8 bits.  probably all languages fit in 9 bits.

This also has the side effect of reducing the alignment of
compressed_string_t from 2 bytes to 1.

testing performed: ran in german and english on pyruler, printed messages
looked right.

Firmware size, en_US
Before: 3044 bytes free in flash
After: 3408 bytes free in flash

Firmware size, de_DE (with #2967 merged to restore translations)
Before: 1236 bytes free in flash
After: 1600 bytes free in flash
2020-05-28 08:36:08 -05:00
Sean Cross c7efc94a33 watchdog: move timeout exception to shared-bindings
Make this exception globally available to all platforms that have
enabled the watchdog timer.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:49 +08:00
Sean Cross 15530a69c7 supervisor: tick: check for watchdog exception if enabled
Check to see if the current exception is a Watchdog exception, if it's
enabled. This ensures we break out of the current sleep() if a watchdog
timeout hits.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:49 +08:00
Sean Cross 8c5df5f732 supervisor: add a new WATCHDOG_RESET safe mode reason
This mode will be used if the board is reset due to the watchdog
expiring.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:49 +08:00
Sean Cross ec99dae953 tick: break on watchdog timeout exception
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-27 11:28:49 +08:00
Sean Cross d1a7fdd9d4 supervisor: support debugging tinyusb
Allow for passing `-DCFG_TUSB_DEBUG=1` or `-DCFG_TUSB_DEBUG=2` on the
command line to enable debugging tinyusb within circuitpython.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-21 21:35:30 +08:00
Scott Shawcroft 916ca9f8a6
Merge pull request #2910 from tannewt/esp32s2
Add initial ESP32S2 support
2020-05-19 12:53:23 -07:00
Sean Cross 34f91f01c6 bleio: adapter: add advertising timeout and status
Add a field to allow specifying a timeout when initiating advertising.
As part of this, add a new property to determine if the device is still
advertising.

Additionally, have the `anonymous` property require a timeout, and set
the timeout to the maximum possible value if no timeout is specified.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-19 15:01:19 +08:00
Sean Cross cfe65742a3 _bleio: support anonymous advertising
Add a new parameter to the `start_advertising()` function to enable
anonymous advertising.  This forces a call to `sd_ble_gap_privacy_set()`
with `privacy_mode` set to `BLE_GAP_PRIVACY_MODE_DEVICE_PRIVACY` and
`private_addr_type` set to
`BLE_GAP_ADDR_TYPE_RANDOM_PRIVATE_RESOLVABLE`.

With this, addresses will cycle at a predefined rate (currently once
every 15 minutes).

Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-19 15:01:18 +08:00
Scott Shawcroft 2c2b53303d
Merge pull request #2837 from k0d/serial-debug
Add support for a debug console, such as ST-Link VCP.
2020-05-18 18:13:31 -07:00
Mark Olsson 007c92ee6a Enable showing the console on a debug uart 2020-05-19 02:02:52 +02:00
Scott Shawcroft 6aaab005c5
Initial ESP32S2 port.
Basic blinky works but doesn't check pins.
2020-05-15 15:36:16 -07:00
Max Holliday 964040b770 More erroneous else statements 2020-05-09 12:16:04 -07:00
Max Holliday 8b6587a0c6 Unified single_status_byte & no_reset_cmd behavior 2020-05-09 12:09:01 -07:00
Max Holliday 9e01bb2136 Removing erroneous else statements 2020-05-09 12:03:26 -07:00
Max Holliday 9ef28d8536 Replacing device that was accidentally deleted 2020-05-09 12:00:59 -07:00
Dan Halbert c377d4bea7
Merge branch 'master' into non-standard-nvm 2020-05-04 16:08:45 -04:00
Brian Dean 28179a3aaf .../external_flash.c: Don't attempt to issue CMD_READ_STATUS2 for
devices with only a single_status_byte.
2020-05-03 18:33:01 -04:00
Max Holliday cc290c50c6 fixing diff error 2020-04-28 18:15:38 -07:00
Max Holliday 6c4decd4e2 decoupling chip specific functions from EXTERNAL_FLASH_QSPI_SINGLE 2020-04-28 11:51:07 -07:00
Scott Shawcroft 755d404edf
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-04-27 16:45:10 -07:00
Max Holliday 86943ca8a1 Merge remote-tracking branch 'adafruit/master' 2020-04-27 13:51:51 -07:00
Scott Shawcroft 9e4b94f466
Merge pull request #2805 from tannewt/update_tinyusb
Update tinyusb
2020-04-26 20:55:36 -07:00
Scott Shawcroft dcb0e50f04
Fix USB midi and hid disable. 2020-04-21 14:15:44 -07:00
Sean Cross 05b5356acc external_flash: add support for mx25r1635f
This flash chip is used in Simmel.

Signed-off-by: Sean Cross <sean@xobs.io>
2020-04-21 09:56:05 +08:00
Scott Shawcroft bebf27e733
Merge remote-tracking branch 'adafruit/master' into lower_power
This isn't perfect and needs a bit more testing.
2020-04-20 18:25:13 -07:00
Jeff Epler 5fcc6d6286 RGBMatrix: finish renaming from Protomatter
This gets all the purely internal references.  Some uses of
protomatter/Protomatter/PROTOMATTER remain, as they are references
to symbols in the Protomatter C library itself.
2020-04-17 18:44:07 -05:00
Scott Shawcroft 7e3d4c61b5
Update TinyUSB and add interrupt hooks. 2020-04-17 14:16:49 -07:00
Scott Shawcroft b580b34cbf
Merge remote-tracking branch 'adafruit/master' into lower_power 2020-04-14 17:14:44 -07:00
Jeff Epler d8362ef654 displayio: swap colors in palettes too
.. change the in-rom palette to be in RGB565 order
2020-04-14 18:25:00 -05:00
Jeff Epler 1f3821220e fix build for non-displayio & non-protomatter targets 2020-04-14 18:24:58 -05:00
Jeff Epler 3a94412cd3 protomatter: more memory allocation fixes
- bump supervisor alloc count by 4 (we actually use 5)
 - move reconstruct to after gc heap is reset
 - destroy protomatter object entirely if not used by a FramebufferDisplay
 - ensure previous supervisor allocations are released
 - zero out pointers so GC can collect them
2020-04-14 18:24:58 -05:00
Jeff Epler 094fe05bdd allow retrieving info about a supervisor allocation 2020-04-14 18:24:54 -05:00
Max Holliday 826837186c adds standard (non-queued) SPI support to QSPI for external flash 2020-04-07 18:17:25 -07:00
Scott Shawcroft c0ba2a839f
Updates based on feedback from jepler 2020-04-06 16:03:31 -07:00