Dan Halbert
f0564b4986
merge from upstream; complicated webusb merge
2021-02-11 18:50:02 -05:00
Dan Halbert
5ba28e9861
Merge pull request #4159 from dhalbert/disable-brownout-before-deep-sleep-4025
...
turn off brownout before deep sleep
2021-02-09 09:03:33 -05:00
Scott Shawcroft
6efd87b3c6
Merge pull request #4124 from m4tk/main
...
Add display init code for Lilygo TTGO T8 ESP32-S2
2021-02-08 16:35:27 -08:00
Dan Halbert
f171660870
Merge pull request #4139 from hierophect/socket-accept-conn
...
Socket: Connect accepted sockets
2021-02-08 16:25:31 -05:00
Dan Halbert
be500fd15c
Merge pull request #4136 from hierophect/socket-portmax
...
Socket: fix inconsistencies in argument types
2021-02-08 16:23:20 -05:00
Dan Halbert
c3a1bd8f13
turn off brownout before deep sleep
2021-02-08 12:40:20 -05:00
Lucian Copeland
1043d619fd
Merge pull request #4148 from Neradoc/fix-recv_into
...
Fix socket.recv_into receiving one less byte than expected
2021-02-08 11:29:41 -05:00
Neradoc
6be2466d6f
ESP32S2: Socket.recv_into only took len-1 bytes
2021-02-07 08:57:19 +01:00
Lucian Copeland
582bc59d39
Connect accepted sockets
2021-02-05 17:32:15 -05:00
Scott Shawcroft
a310d4336b
Merge pull request #4128 from hierophect/esp32s2-i2s-claimpin
...
ESP32S2: Add I2S pin claiming
2021-02-05 11:47:49 -08:00
Lucian Copeland
8214d67e5f
Fix LWIP connect error report
2021-02-05 13:14:49 -05:00
Lucian Copeland
4d26ffb447
Make timeout core types consistent
2021-02-05 12:32:41 -05:00
m4tk
54bd79a51a
LCD_MISO is not connected on board
2021-02-05 07:52:01 +01:00
Dan Halbert
0802b22ed6
usb descriptors all set; rework of enabling for USB devices
2021-02-04 19:23:40 -05:00
Lucian Copeland
210d0f8798
Add I2S pin claiming
2021-02-04 16:30:05 -05:00
m4tk
ff7b296b04
Add display init code for Lilygo TTGO T8 ESP32-S2
2021-02-04 16:46:15 +01:00
Kevin Banks
215a56c920
Merge branch 'main' into webusb (trying to get CI back online)
2021-02-03 16:48:28 -06:00
BiffoBear
2656c84b01
Initial commit. Edited error messages in .c files
2021-02-03 05:49:40 +07:00
Kevin Banks
e79283932d
Moving control of USB compile-time options down to the BOARD level
2021-02-01 19:08:56 -06:00
Kevin Banks
e1618c21b2
Default WebUSB to OFF because other ports are not ready for it yet
2021-02-01 17:56:38 -06:00
Lucian Copeland
66639b237f
Merge remote-tracking branch 'upstream/main' into sslsocket
2021-02-01 11:43:01 -05:00
Lucian Copeland
8277ffca86
Fix hash, close, error bugs
2021-02-01 11:04:12 -05:00
Scott Shawcroft
529114c162
Merge pull request #4077 from netroy/lilygo-ttgo-t8-esp32-s2
...
Add support for Lilygo TTGO T8 ESP32-S2
2021-01-31 19:50:36 -08:00
Aditya
6dba7a146d
Add support for Lilygo TTGO T8 ESP32-S2
2021-01-31 14:30:31 +01:00
Lucian Copeland
ddd516a683
Fix default timeout
2021-01-30 15:44:44 -05:00
Lucian Copeland
a724f6f954
Fix documentation builds
2021-01-29 11:58:02 -05:00
Kevin Banks
63f9b12fe6
Partially hard-coded VENDOR descriptor has been added. First build to be accessed via WebUSB. NOTE - had to disable HID (EndPoint shortage?)
2021-01-28 20:22:31 -06:00
Scott Shawcroft
351a0e747d
Merge pull request #4047 from kmatch98/esp32s2_ParallelBus
...
Add initial ParallelBus support for ESP32-S2
2021-01-26 13:07:58 -08:00
Lucian Copeland
815ab5277b
Fix stubs error, out of sockets error, invalid TLS leak
2021-01-26 14:13:12 -05:00
Kevin Banks
fbfb7b68cc
Most of the code we need has been pulled in from the tinyusb webusb_serial demo. Still LOTS to do regarding descriptors.
2021-01-25 20:37:58 -06:00
Kevin Matocha
61850acd14
Fixed bug in pin error handling, deleted debug prints
2021-01-25 16:51:12 -06:00
Kevin Matocha
4140012430
Allow pins >= 32, allow write pin on different register than data pins
2021-01-25 16:25:56 -06:00
Lucian Copeland
9f34ec78c4
Separate Socket and SSLSocket, add LWIP connect
2021-01-25 17:07:25 -05:00
Dan Halbert
69869e1439
CIRCUITPY_* switches for JSON, RE, etc. Doc cleanup
2021-01-24 23:10:20 -05:00
Kevin Matocha
10965e5989
Delete unnecessary comments
2021-01-23 11:30:17 -06:00
Kevin Matocha
34aa01c5f9
Remove redundant clear_write, add make translate
2021-01-22 22:29:51 -06:00
Kevin Matocha
811a34fc3d
Add initial ParallelBus support for ESP32-S2
2021-01-22 14:42:09 -06:00
Dan Halbert
f72c1474c5
Merge branch 'main' into connect
2021-01-22 03:56:57 -05:00
hierophect
f88a896c03
Merge pull request #3854 from hierophect/esp-tcpserver
...
ESP32S2: Implement TCP Server bindings
2021-01-21 17:25:14 -05:00
anecdata
1f6cd496c7
1. check enabled before scan; 2. make start-station() the single control point for esp_wifi_set_mode()
2021-01-21 13:54:19 -06:00
Scott Shawcroft
eff68b0d9f
Merge pull request #4011 from dheera/main
...
prevents going into safe mode for watchdog resets
2021-01-20 11:30:12 -08:00
anecdata
a01ff658ea
fix case of connecting when wifi is stopped
2021-01-18 19:57:01 -06:00
Dan Halbert
ee48e4b452
ESP32-S2: Initialize touch in proper order
2021-01-18 11:52:03 -05:00
anecdata
c524900a1b
check connected before connecting
2021-01-17 20:21:31 -06:00
jerryneedell
a9389343a8
Revert "UMFEATHERS2 - implement use of DotStar for status led"
2021-01-17 05:15:19 -05:00
dheera
d43eb7e84b
prevents going into safe mode for watchdog resets
2021-01-16 17:38:08 -08:00
Scott Shawcroft
816cbe4704
Merge pull request #3992 from anecdata/reason4
...
wifi: more disconnect reasons for retries & include error code in exception
2021-01-15 11:52:34 -08:00
Lucian Copeland
4bc664fe5f
Merge remote-tracking branch 'upstream/main' into esp-tcpserver
2021-01-15 12:02:16 -05:00
Dan Halbert
aedc8efeda
Add pin A1 as alias for AD1; A1 is preferred
2021-01-14 14:43:47 -05:00
Lucian Copeland
287770f885
Merge remote-tracking branch 'upstream/main' into esp-tcpserver
2021-01-14 10:21:08 -05:00
anecdata
f75bb5c50f
Rename to match WIFI_REASON. Also return specific reason code.
2021-01-13 23:46:35 -06:00
anecdata
e519dd3c52
Retry on all disconnect reasons other than: 2 exception reasons & 1 manual disconnect reason.
2021-01-13 23:45:59 -06:00
Lucian Copeland
37a8c1c575
Complete non-blocking implementations, add socket close checking
2021-01-13 19:05:07 -05:00
Jeff Epler
ed0cb248e9
esp32s2: Fix 'make flash'
...
As reported by @jerryneedell, this change was incorrect; the given
ESPTOOL_FLAGS caused `write_flash` to be repeated twice, which doesn't
work.
Closes #3981 .
2021-01-12 16:04:29 -06:00
Lucian Copeland
4cdb298a20
WIP of non-blocking calls
2021-01-12 15:05:28 -05:00
Dan Halbert
f9c762256f
Merge pull request #3733 from jepler/audioout-esp32
...
esp32s2: Add I2SAudioOut
2021-01-12 13:25:40 -05:00
Scott Shawcroft
bfdaa6eb9c
Merge pull request #3959 from ladyada/main
...
try adding new feather def
2021-01-12 08:26:29 -08:00
Jeff Epler
1ca29ec47c
Merge remote-tracking branch 'origin/main' into audioout-esp32
2021-01-12 09:23:07 -06:00
microDev
cd16f29efd
Merge branch 'main' into TouchAlarm
2021-01-12 18:28:38 +05:30
Scott Shawcroft
081249f796
Merge pull request #3944 from BennyE/wifi-authmode
...
esp32-s2: Adding authmode keyword
2021-01-11 16:05:28 -08:00
Scott Shawcroft
3cf4d9c57f
Merge pull request #3954 from anecdata/mpconfigport
...
ESP32-S2: added sys.platform
2021-01-11 16:03:17 -08:00
Scott Shawcroft
3a7755b311
Merge pull request #3930 from jerryneedell/jerryn_feathers2_led
...
UMFEATHERS2 - implement use of DotStar for status led
2021-01-11 15:29:09 -08:00
microDev
5f448139e0
fixes and enhancement for touch alarm
...
- prevent touch alarm initialization if not set
- fix wake_alarm is set to touch alarm on autoreload
- add ability to have multiple touch alarms in light sleep
2021-01-11 15:30:45 +05:30
lady ada
c87e1a6527
ok lets try without auto-display
2021-01-10 11:58:39 -05:00
BennyE
53e4d78a3c
Update ports/esp32s2/common-hal/wifi/Network.c
...
Avoid to use yet another variable.
Co-authored-by: Scott Shawcroft <scott@tannewt.org>
2021-01-10 17:18:43 +01:00
lady ada
d036620c70
compilier
2021-01-09 23:19:04 -05:00
lady ada
5b9ce9e7cf
fix dup usb
2021-01-09 22:42:43 -05:00
lady ada
b5b0d45b73
add tft
2021-01-09 22:36:54 -05:00
lady ada
68a5e6dcba
copypaste typo
2021-01-09 15:52:58 -05:00
Jeff Epler
e20c65d8f0
background tasks: Add, use port_wake_main_task
...
Some ports need an extra operation to ensure that the main task is
awoken so that a queued background task will execute during an ongoing
light sleep.
This removes the need to enable supervisor ticks while I2SOut is operating.
Closes : #3952
2021-01-09 14:02:47 -06:00
Jeff Epler
4735cf4747
esp32s2: audiobusio: move i2s_common inside
...
Originally, I believed the implementation might be shared with AudioOut,
as on the ESP32 (non-S2) the I2S peripheral was also used to drive the DAC.
However, this is not the case on ESP32-S2 and appears it will not be
the case with the ESP32-S3 or -C3, to the extent that there's skeletal
support for either of them in esp-idf master branch.
However, it could still be shared by I2SIn or PDMIn (the latter being
hypothetically implemented as I2SIn + digital postprocessing like we did
in the atmel-sam port, to my understanding), so I moved it to
the common-hal folder.
2021-01-09 14:02:47 -06:00
Jeff Epler
10861b4038
esp32s2: Rename ESP_CALL_RAISE to CHECK_ESP_RESULT
...
Suggested by @tannewt, thanks!
2021-01-09 13:41:44 -06:00
lady ada
a600fd3478
forgot deinit
2021-01-09 14:01:58 -05:00
lady ada
301facf102
newline
2021-01-09 13:36:21 -05:00
lady ada
7de1da45da
woops out of sync header, plus... i dunno add some frozen modules cause we have almost no RAM :(
2021-01-09 13:23:17 -05:00
lady ada
813fa671f3
nowhitespace
2021-01-09 12:29:08 -05:00
Limor "Ladyada" Fried
9253351fa4
Merge branch 'main' into main
2021-01-09 12:25:16 -05:00
lady ada
999ee68e12
try adding new feather def
2021-01-09 12:22:53 -05:00
Caio Henrique de Queiroz Katayama
7b4558b750
Fix socket.recvfrom_into()
2021-01-08 19:17:17 -05:00
anecdata
06ab848a0d
added platform
2021-01-08 16:48:25 -06:00
jerryneedell
de5b138dcf
remove commented line
2021-01-08 14:46:37 -05:00
jerryneedell
7556f38f04
initialize LDO2 in board_init()
2021-01-08 14:40:06 -05:00
Jeff Epler
5f0e41ad60
I2SOut: Enable ticks during audio playback
...
.. otherwise, the background callback to load the I2S fifos does not get
run. (I'm not sure this is _correct_ behavior of sleep + background
tasks, but it is the current behavior)
2021-01-08 09:01:34 -06:00
Jeff Epler
430bcdb59d
port_i2s_play: fill the initial buffer via background callback
...
There were _possibly_ problems where this routine was being entered
by direct call AND by background callback. Schedule the work here,
and it will be done almost immediately, without worry about interference.
I don't know if this is strictly necessary, but it doesn't hurt. Since
the I2S clock is being run all the time, we have to enter the background
task to fill the FIFO with zeros constantly anyway.
2021-01-08 08:49:25 -06:00
Jeff Epler
12264cca34
port_i2s_play: remove build error
2021-01-08 08:47:13 -06:00
Jeff Epler
0b7a4c4b2b
i2s_fill_buffer: remove debug print
2021-01-08 08:46:56 -06:00
Jeff Epler
873a300d02
i2s_fill_buffer: Need to fill with zeros when stopping
2021-01-08 08:46:41 -06:00
Jeff Epler
cfd8288dfa
esp2s2: enlarge stack-buffer, use it instead of i2s_zero_dma_buffer
...
.. it's not clear that there was a problem with i2s_zero_dma_buffer, but
just in case.
2021-01-07 16:29:52 -06:00
Jeff Epler
d3afda61d8
esp32s2: i2s: must reset buffer, otherwise wave samples don't start
...
.. and other housekeeping when starting to play a sample
2021-01-07 16:29:08 -06:00
Jeff Epler
352226402c
esp32s2: i2s: fix accounting for "stretched" frames
2021-01-07 16:28:33 -06:00
Jeff Epler
010a4e7b0f
esp32s2: port: Ensure JTAG pins are available for debugging
2021-01-07 16:23:21 -06:00
BennyE
115f3e0867
Updated code as per helpful suggestion
2021-01-07 23:05:16 +01:00
Jeff Epler
7bb196b9d2
esp32s2: 'make flash': Allow customizing the esptool flags
...
This can be useful so that e.g., on a Kaluga when programming via
the FTDI chip, you can override the variable to specify "--after=hard_reset"
to automatically return to running CircuitPython, choose a different
baud rate (921600 is about 2s faster than 460800), etc:
make BOARD=espressif_kaluga_1 ESPTOOL_FLAGS="-b 921600 --before=default_reset --after=hard_reset"
2021-01-07 15:01:33 -06:00
Jeff Epler
30c6dd3f76
Merge remote-tracking branch 'origin/main' into audioout-esp32
2021-01-07 14:11:14 -06:00
jerryneedell
6976ec6ef9
Merge remote-tracking branch 'upstream/main' into jerryn_feathers2_led
2021-01-07 15:02:40 -05:00
Scott Shawcroft
55c80754c7
Merge pull request #3945 from 2bndy5/fix-table-in-a-readme
...
convert esp32s2 port readme to rst
2021-01-07 10:43:34 -08:00
Scott Shawcroft
0b0b476be6
Merge pull request #3940 from caternuson/magtag_accelo_irq_pin
...
Add MagTag accelo IRQ pin
2021-01-07 10:31:33 -08:00
brendan
18122e0455
missed a couple inline code snippets
2021-01-06 15:28:19 -08:00
brendan
092331eee1
convert esp32s2 readme to rst
2021-01-06 15:19:40 -08:00
BennyE
66d87782be
Adding authmode keyword
2021-01-06 23:52:30 +01:00
caternuson
9db0a4f265
add magtag accelo irq pin
2021-01-06 09:17:19 -08:00
Scott Shawcroft
a33359762d
Merge pull request #3903 from anecdata/reasons
...
ESP32-S2: Log all Wi-Fi events & remove unneeded call
2021-01-06 08:41:19 -08:00
anecdata
98c9492a8c
change ESP_EARLY_LOG* to ESP_LOG* throughout event_handler
2021-01-05 18:39:51 -06:00
jerryneedell
ec02102409
implment use of DotStar for staus led
2021-01-04 07:41:25 -05:00
Seon Rozenblum
10f178d162
Fixed incorrect pin assignment on header
...
IO13 is for blue LED
IO14 is the correct pin header between IO18 and IO12
The silk is wrong (shows IO13), but hardware is correct as IO14, but IO14 was not included in pins.c
Silk will be updated on next PCB production run
2021-01-04 10:06:32 +11:00
askpatricw
2ce07209df
changes based on UM's input
2021-01-01 17:23:11 -08:00
askpatricw
220501e159
dupe LED entries
2020-12-31 18:02:44 -08:00
askpatricw
43f93b097f
release and pre-release FeatherS2 NSync
2020-12-31 17:50:41 -08:00
Jeff Epler
5698b8bb0a
Merge pull request #3850 from microDev1/touch-s2
...
Support for Touch Alarm
2020-12-30 16:25:11 -06:00
microDev
0bad6110d4
update wake-alarm implementation
2020-12-31 02:44:20 +05:30
microDev
b83bdc540d
enable light-sleep functionality
2020-12-31 02:22:20 +05:30
microDev
28ce5e8988
Merge branch 'main' into touch-s2
2020-12-30 22:44:22 +05:30
microDev
c7f68022ef
add pretend-to-sleep functionality
2020-12-30 22:11:22 +05:30
anecdata
d537d94a4c
see what we're missing
2020-12-30 09:45:15 -06:00
anecdata
0914b71653
remove unneeded set_config (wrong param; called in connect anyway)
2020-12-30 09:26:25 -06:00
Hugo Dahl
72cad49c69
Fix minor typo in ESP32S2 readme
2020-12-29 22:52:59 -06:00
Jeff Epler
a7542598a0
esp32s2: add I2SOut
2020-12-29 14:46:38 -06:00
Jeff Epler
b40a579d18
esp32s2: espidf: Consistent error checking of esp-idf calls
...
By surrounding most ESP-IDF API calls with this new macro, their failure will
result in a CircuitPython exception.
2020-12-29 14:06:32 -06:00
Jeff Epler
05ba1431c3
esp32s2: espidf: Add IDFError
...
this is an exception class for "generic" IDF errors that don't have
their own exception type.
2020-12-29 14:06:32 -06:00
Jeff Epler
d024df6b06
esp32s2: Use better optimizer flags in debug builds
...
(note that the before and after files both lack trailing newlines; this is
how the esp-idf do)
OPTIMIZATION_DEFAULT is -Og, which enables optimizations that do not
interfere with the debugger:
```
elseif(CONFIG_COMPILER_OPTIMIZATION_DEFAULT)
list(APPEND compile_options "-Og")
```
2020-12-29 14:06:32 -06:00
Jeff Epler
7401aa8e85
Merge pull request #3888 from microDev1/fix-reset-pin
...
FIX : common_hal_reset_pin()
2020-12-29 10:08:47 -06:00
Scott Shawcroft
c3396e4b49
Merge pull request #3868 from BennyE/wifi-enhancement-countrycode
...
esp32-s2: wifi enhancement to include countrycode
2020-12-28 11:49:41 -08:00
microDev
dc332baa87
update common_hal_reset_pin()
2020-12-28 20:04:00 +05:30
Scott Shawcroft
6c7e6abcfd
Downgrade OTA API for IDF 4.2
2020-12-27 20:30:49 -08:00
BennyE
64bb055700
Updating comment to reflect feedback of espressif from IDFGH-4486 -> works correct as per the protocol
2020-12-24 15:40:53 +01:00
Dan Halbert
8061a2574d
Merge branch 'main' into pin_alarm
2020-12-23 22:05:02 -05:00
BennyE
1a6b1b1953
implementing suggested changes
2020-12-24 00:37:37 +01:00
BennyE
e9c9fce15d
Remove debug log messages
2020-12-23 14:59:09 +01:00
Scott Shawcroft
1fca297a2d
A couple sleep fixes
...
* Better messaging when code is stopped by an auto-reload.
* Auto-reload works during sleeps on ESP32-S2. Ticks wake up the
main task each time.
* Made internal naming consistent. CamelCase Python names are NOT
separated by an underscore.
2020-12-22 16:13:02 -08:00
Jeff Epler
da8f023665
esp32s2: make flash: use the stub
...
Very long ago, this was apparently not supported in esptool yet, at
least when operating over USB CDC. This now works just fine, and
our esp webtool relies on it as well. It makes flashing faster,
too.
2020-12-22 10:27:42 -06:00
Dan Halbert
d4e9eea397
mark alarm.wake_alarm during gc sweep
2020-12-22 08:11:01 -08:00
Dan Halbert
d6df43b943
Merge pull request #3863 from dhalbert/adafruit-prefix
...
Add Adafruit to MICROPY_HW_BOARD_NAME for various boards
2020-12-22 08:02:35 -05:00
Dan Halbert
39ca406a31
Add Adafruit to MICROPY_HW_BOARD_NAME for various boards
2020-12-21 23:32:11 -05:00
BennyE
ae3b440835
more fixes and still with debug
2020-12-22 00:32:48 +01:00
Lucian Copeland
75620884e6
Fix stubs, recv_into error
2020-12-21 13:26:43 -05:00
Lucian Copeland
32736dd2c3
Implement server API
2020-12-20 17:12:03 -05:00
BennyE
2e393ed195
adding debug infos
2020-12-20 22:03:38 +01:00
microDev
ecd7c0878e
expose wake pin parameter and more tweaks
2020-12-19 20:54:36 +05:30
microDev
a60fabdffa
add touch alarm support for esp32s2
2020-12-19 12:56:34 +05:30
microDev
8eaf2b0c19
implement touch alarm
2020-12-18 12:54:36 +05:30
microDev
4512290ba0
Merge branch 'main' into ota-s2
2020-12-18 00:44:00 +05:30
microDev
4863413bc9
rename ota to dualbank
2020-12-18 00:34:56 +05:30
Scott Shawcroft
0dcc659d53
Swap to IDF release/4.2 branch for stability
2020-12-15 18:12:59 -08:00
Scott Shawcroft
1ad49d9a18
Add alarm.pin that wakes on pin level
...
Fixes #3787
2020-12-15 18:12:59 -08:00
hierophect
3ad4b12ce1
Merge branch 'main' into esp-analog-hang
2020-12-15 15:08:30 -05:00
Scott Shawcroft
d076296659
Merge pull request #3816 from dhalbert/sleepmemory
...
alarm.sleep_memory + alarm.wake_alarm
2020-12-14 17:40:02 -08:00
Scott Shawcroft
d6ee17c6fd
Merge pull request #3817 from BennyE/reserve-pins-only-for-debug
...
esp32s2: Reserve UART pins only if DEBUG=1 is set to address issue 3811
2020-12-14 17:32:17 -08:00
Scott Shawcroft
a1f773d9ed
Merge pull request #3819 from BennyE/issue3663
...
Fix for issue 3663 by returning early if no scan was started before s…
2020-12-14 17:11:18 -08:00
Scott Shawcroft
dc473b29e3
Merge pull request #3643 from hierophect/esp32-pin-reset
...
ESP32-S2: Add IDF pin resets to Microcontroller
2020-12-14 17:09:29 -08:00
Lucian Copeland
d793ec2872
Change pinfunc to default of 0 at reset
2020-12-14 14:25:38 -05:00
Lucian Copeland
cac755ba16
Merge remote-tracking branch 'upstream/main' into esp-analog-hang
2020-12-14 13:00:57 -05:00
Lucian Copeland
f15e2d86c0
Reduce samples from 64 to 2
2020-12-14 12:59:20 -05:00
Dan Halbert
e0afa32cfa
use RTC_DATA_ATTR; address review comments
2020-12-14 11:36:54 -05:00
BennyE
210c0ec89c
add country(code) to wifi network objects)
2020-12-13 13:32:12 +01:00
microDev
37ee5e683d
Merge branch 'main' into ota-s2
2020-12-12 05:25:46 +05:30
BennyE
c5c13620f2
Fix for issue 3663 by returning early if no scan was started before stop is issued
2020-12-12 00:49:53 +01:00
BennyE
81c4871fdf
Set DEBUG CFLAG if set in make
2020-12-11 22:11:39 +01:00
BennyE
e3194ad54e
Reserve UART pins only if DEBUG=1 is set to address issue 3811
2020-12-11 20:35:28 +01:00
Dan Halbert
cf938983e9
SleepMemory + set alarm.wake_alarm
2020-12-11 08:10:26 -05:00
microDev
cb35abfd04
add docs, update translation & fix ota.flash()
2020-12-11 01:01:01 +05:30
Dan Halbert
55f4110983
fix typo
2020-12-10 14:16:25 -05:00
Dan Halbert
5964163649
Initial SleepMemory code
2020-12-10 13:03:40 -05:00
microDev
6a4f74946f
reset ota module on every vm run
2020-12-10 16:48:58 +05:30
microDev
07015ad527
add ability to switch boot partition
2020-12-10 16:42:45 +05:30
microDev
bfa2c604ef
add ability to flash in discontinuous chunks
2020-12-10 15:45:25 +05:30
microDev
ed5add37f6
add ability to flash in continuous chunks
2020-12-10 14:36:49 +05:30
microDev
dee86a014b
factor out esp_ota_end
2020-12-10 14:04:24 +05:30
microDev
20c3184c87
re-organize and clean-up
2020-12-10 12:34:56 +05:30
Scott Shawcroft
e14b148e62
Merge pull request #3803 from skieast/fix_i2c_hang_with_wifi
...
Working, tested with two i2c busses
2020-12-09 10:03:31 -08:00
Scott Shawcroft
133013083a
Merge pull request #3808 from tannewt/panic_safe_mode
...
Enter safe mode after panic or brownout
2020-12-08 16:31:22 -08:00
Scott Shawcroft
57101d7da6
Merge pull request #3807 from tannewt/sleep_tweaks
...
Add `board_deinit` for use with sleep
2020-12-08 16:30:41 -08:00
Lucian Copeland
9a5006e241
Remove problematic calloc
2020-12-08 17:43:39 -05:00
Scott Shawcroft
0b4bcd9599
Fix build and more comments
2020-12-08 13:05:21 -08:00
Scott Shawcroft
d0a806d797
Enter safe mode after panic or brownout
...
Uses the IDF's reset reason. Does nothing before reset.
Fixes #3389
2020-12-08 11:03:24 -08:00
Scott Shawcroft
40118bcf57
Add board_deinit for use with sleep
...
This changes lots of files to unify `board.h` across ports. It adds
`board_deinit` when CIRCUITPY_ALARM is set. `main.c` uses it to
deinit the board before deep sleeping (even when pretending.)
Deep sleep is now a two step process for the port. First, the
port should prepare to deep sleep based on the given alarms. It
should set alarms for both deep and pretend sleep. In particular,
the pretend versions should be set immediately so that we don't
miss an alarm as we shutdown. These alarms should also wake from
`port_idle_until_interrupt` which is used when pretending to deep
sleep.
Second, when real deep sleeping, `alarm_enter_deep_sleep` is called.
The port should set any alarms it didn't during prepare based on
data it saved internally during prepare.
ESP32-S2 sleep is a bit reorganized to locate more logic with
TimeAlarm. This will help it scale to more alarm types.
Fixes #3786
2020-12-08 10:52:25 -08:00
microDev
2f95c94ad8
esp32s2 - update common_hal_mcu_reset
2020-12-08 18:00:58 +05:30
microDev
602243748b
add ota support for esp32s2
2020-12-08 11:45:00 +05:30
microDev
fc23a0cc8a
implement ota module
2020-12-08 11:30:00 +05:30
Bruce Segal
571c063c2a
Working, tested with two i2c busses
2020-12-07 17:57:54 -08:00
Scott Shawcroft
44b56f76c4
Store safe mode state in the RTC.
...
Also print backtrace before reset when DEBUG. This will help debug
safe mode issues which calls reset.
2020-12-07 16:39:54 -08:00
Scott Shawcroft
22ad76bb48
Merge pull request #3800 from BennyE/wifi-better-logs
...
Enhance debug log for wifi scan, sta_start, sta_stop
2020-12-07 12:32:15 -08:00
Lucian Copeland
c1a2ea27ce
Change to config-based resets
2020-12-07 13:57:47 -05:00
Lucian Copeland
c7b5928833
Fix submodule desync
2020-12-07 11:47:39 -05:00
Lucian Copeland
40a536904f
Merge remote-tracking branch 'upstream/main' into esp32-pin-reset
2020-12-07 11:45:27 -05:00
Dan Halbert
169b487509
Include wifi.radio singleton in gc
2020-12-07 11:07:56 -05:00
BennyE
70827ac3da
debug log for wifi scan, start stop
2020-12-06 23:38:04 +01:00
Dan Halbert
348392f8cc
Merge pull request #3775 from tannewt/nina_certs
...
Use nina-fw root certs
2020-12-02 16:13:19 -05:00
Dan Halbert
9b3186b625
Merge pull request #3776 from tannewt/backup_socket_timeout
...
Two minor socket changes
2020-12-02 16:12:29 -05:00
Dan Halbert
31acfedf93
Merge pull request #3780 from tannewt/block_while_erasing
...
Block all tasks (not interrupts) during flash erase
2020-12-02 16:10:25 -05:00
Scott Shawcroft
d7ba641ff6
Merge pull request #3767 from dhalbert/sleep
...
Initial alarm and sleep PR: time alarms with light and deep sleep; PinAlarms not yet implemented
2020-12-02 12:51:43 -08:00
Scott Shawcroft
73e22f9eeb
Block all tasks (not interrupts) during flash erase
...
Otherwise we risk running code from flash while an erase is in
progress, crashing and corrupting the file system.
Related to #3744
2020-12-01 18:15:06 -08:00
Dan Halbert
8b7c23c1ee
address review comments
2020-12-01 20:01:14 -05:00
Scott Shawcroft
927624468d
Two minor socket changes
...
* Remove BrokenPipeError and prefer to return the number of bytes
received. (May be zero.)
* Add two minute backup timeout to reduce the chance we hang on
recv accidentally.
2020-11-30 18:39:50 -08:00
Scott Shawcroft
4ac4faaaf6
Use nina-fw root certs
...
That way we have one set we use for all of Adafruit's connected
devices.
2020-11-30 17:02:26 -08:00
Scott Shawcroft
5b3c930e38
Merge pull request #3738 from microDev1/fix-touch
...
ESP32S2: Fix multiple touchpad don't work simultaneously
2020-11-30 16:03:16 -08:00
Christian Walther
c7404a3ff8
Add movable allocation system.
...
This allows calls to `allocate_memory()` while the VM is running, it will then allocate from the GC heap (unless there is a suitable hole among the supervisor allocations), and when the VM exits and the GC heap is freed, the allocation will be moved to the bottom of the former GC heap and transformed into a proper supervisor allocation. Existing movable allocations will also be moved to defragment the supervisor heap and ensure that the next VM run gets as much memory as possible for the GC heap.
By itself this breaks terminalio because it violates the assumption that supervisor_display_move_memory() still has access to an undisturbed heap to copy the tilegrid from. It will work in many cases, but if you're unlucky you will get garbled terminal contents after exiting from the vm run that created the display. This will be fixed in the following commit, which is separate to simplify review.
2020-11-28 17:50:23 +01:00
Dan Halbert
596e0e4bd2
merge from upstream
2020-11-27 16:06:57 -05:00
Dan Halbert
e308a9ec11
working! PinAlarm not implemented yet.
2020-11-27 16:03:37 -05:00
Dan Halbert
104a089677
deep sleep working; deep sleep delay when connected
2020-11-26 22:06:37 -05:00
microDev
e90cb3ad86
Merge branch 'main' into fix-touch
2020-11-26 11:33:45 +05:30
microDev
6af48bb24c
reset touchin on every vm run
2020-11-26 11:22:44 +05:30
Jeff Epler
7923aa0a62
Merge pull request #3708 from hierophect/esp32s2-udp
...
ESP32-S2: Add UDP with recvfrom_into and sendto
2020-11-25 21:11:20 -06:00
Jeff Epler
6fd123a5c4
Merge pull request #3758 from tannewt/update_connect_doc
...
Update wifi.Radio.connect doc
2020-11-25 21:09:56 -06:00
Scott Shawcroft
abff2615cb
Merge pull request #3754 from hierophect/esp-spi-pinclaim
...
ESP32S2: fix pin claiming bugs
2020-11-25 15:11:29 -08:00
Dan Halbert
ef0830bfe2
merge from upstream + wip
2020-11-25 17:52:06 -05:00
Dan Halbert
9dbea36eac
changed alarm.time API
2020-11-25 15:09:27 -05:00
Lucian Copeland
a854da35d3
Fix masking issue causing pin claim problems
2020-11-25 12:14:56 -05:00
Lucian Copeland
c9bc877683
Merge remote-tracking branch 'upstream/main' into esp-spi-pinclaim
2020-11-25 10:43:35 -05:00
Scott Shawcroft
9a692c3222
Exit faster on recv when TLS connection closed
...
When a TLS connection is closed by the server it usually sends a
notice. We see this incoming byte with lwip_ioctl and try to read
it. The read returns 0 but we keep trying anyway. Now, we quit
trying when we get zero back. If the connection was still alive
it'd either read a byte or delay until a byte could be read.
2020-11-24 18:14:22 -08:00
Scott Shawcroft
4ac11c8d31
Update wifi.Radio.connect doc
...
Now it includes bssid info.
2020-11-24 17:54:39 -08:00
hierophect
510f464234
Merge branch 'main' into esp32s2-udp
2020-11-24 18:28:10 -05:00
Scott Shawcroft
669f17e5bf
Merge pull request #3678 from microDev1/nvm-s2
...
ESP32S2: Support for NVM
2020-11-24 14:45:35 -08:00
Lucian Copeland
59458a9013
Add pin claiming to SPI construct
2020-11-24 16:46:11 -05:00
hierophect
d0e75e635a
Merge pull request #3714 from microDev1/ps2io-S2
...
ESP32S2: Support for PS/2-IO
2020-11-24 14:56:09 -05:00
Lucian Copeland
0c5e0954db
Add closed socket identification
2020-11-24 14:51:06 -05:00
Lucian Copeland
1031fe2992
correct submodule
2020-11-24 14:46:43 -05:00
Jeff Epler
0836abba41
Merge pull request #3720 from tannewt/more_wifi_retry
...
Retry connection when getting NOT_AUTHED
2020-11-24 09:54:54 -06:00
microDev
bbe13490b5
Merge branch 'main' into nvm-s2
2020-11-24 12:24:48 +05:30
microDev
6ff24410eb
use values pointer directly
2020-11-24 11:44:11 +05:30
microDev
9dd1783da5
Merge branch 'main' into ps2io-S2
2020-11-24 11:11:11 +05:30
Dan Halbert
7a45afc549
working, but need to avoid deep sleeping too fast before USB ready
2020-11-23 22:44:53 -05:00
Dan Halbert
ebdc48ae22
Merge pull request #3745 from kattni/magtag-pin-update
...
Add pin names from silk
2020-11-23 19:48:12 -05:00
Lucian Copeland
1c9f33a372
Replace reset with mux change
2020-11-23 19:01:30 -05:00
Lucian Copeland
86694262b8
Merge remote-tracking branch 'upstream/main' into esp32-pin-reset
2020-11-23 18:58:46 -05:00
Lucian Copeland
8ffd973e22
Merge remote-tracking branch 'upstream/main' into esp32s2-udp
2020-11-23 18:40:14 -05:00
Scott Shawcroft
a80bf22211
Merge pull request #3727 from BennyE/wifi-full-scan
...
esp32s2: Do a full scan when channel/BSSID are not given
2020-11-23 15:19:57 -08:00
Scott Shawcroft
c67f5892ff
Merge pull request #3704 from microDev1/frequencyio-S2
...
ESP32S2: Support for FrequencyIO
2020-11-23 14:59:27 -08:00
Kattni Rembor
7928a0d454
Blank lines to group aliases.
2020-11-23 16:02:45 -05:00
Kattni Rembor
3730862362
Update to match silk rev 1
2020-11-23 15:56:36 -05:00
Kattni Rembor
efda912437
Add pin names from silk
2020-11-23 15:53:28 -05:00
Dan Halbert
3abee9b256
compiles; maybe ready to test, or almost
2020-11-22 21:52:37 -05:00
Dan Halbert
25591a3f8a
Merge branch 'esp32s2-common-hal-mcu-delay-us' into sleep
2020-11-22 21:01:49 -05:00
Dan Halbert
a0f1ec3c4a
wip
2020-11-22 19:10:09 -05:00
Dan Halbert
f62ea25331
ESP32S2: common_hal_mcu_delay_us() now calls mp_hal_delay_us()
2020-11-22 19:08:27 -05:00
microDev
f3b5ca5f01
replace goto with conditional break
2020-11-22 19:20:21 +05:30
microDev
048ca2a570
get multiple touchpad working
2020-11-22 18:54:18 +05:30
Dan Halbert
75559f35cc
wip: ResetReason to microcontroller.cpu
2020-11-21 23:29:52 -05:00
Dan Halbert
e4c66990e2
compiles
2020-11-20 23:33:39 -05:00
BennyE
2773f534c9
Update ports/esp32s2/common-hal/wifi/Radio.c
...
adding suggested changes
2020-11-20 09:40:32 +01:00
BennyE
6760cdf678
Let connect() choose strongest AP if channel and BSSID are not given
2020-11-20 00:11:17 +01:00
Dan Halbert
39e1f52e28
wip; not compiling yet
2020-11-19 17:47:12 -05:00
BennyE
17a8bafe05
Choose best AP in range if no channel/bssid given
2020-11-19 23:39:48 +01:00
Dan Halbert
649c930536
wip
2020-11-19 15:43:39 -05:00
microDev
a25b27520d
update nvm implementation
2020-11-20 00:22:00 +05:30
microDev
bc9036f353
use pointer to get nvs handle
2020-11-20 00:15:30 +05:30
Jeff Epler
dd108b755d
esp32s2: initialize event loop ane netif only once
...
deinitting these seems to cause problems.
2020-11-19 11:36:02 -06:00
microDev
040eaa0443
re-organize and clean-up
2020-11-19 15:30:15 +05:30
microDev
b56645808c
fix crash on user code exit
2020-11-19 11:44:22 +05:30
Dan Halbert
5bb3c321e9
merge from main
2020-11-19 00:29:14 -05:00
Dan Halbert
682054a216
WIP: redo API; not compiled yet
2020-11-19 00:23:27 -05:00
