Glenn Ruben Bakke
|
073cfc0a2e
|
nrf5/drivers: Adding SSD1306 SPI display driver. Not complete, but can do fill screen operation atm.
|
2017-01-10 18:26:58 +01:00 |
|
Glenn Ruben Bakke
|
1d2bf26373
|
nrf5/drivers: Adding epaper display example script in comment for pca10056 / nrf52840 in the display module.
|
2017-01-09 19:45:37 +01:00 |
|
Glenn Ruben Bakke
|
dd7007240c
|
nrf5/boards: Enable PWM module and epaper display module in pca10056 board config.
|
2017-01-09 19:44:31 +01:00 |
|
Glenn Ruben Bakke
|
1208970f6c
|
nrf5/drivers: Adding some more delay on bootup to ensure display recovers after reset.
|
2017-01-09 19:33:01 +01:00 |
|
Glenn Ruben Bakke
|
22c7cf7358
|
nrf5/examples: Adding copy of ssd1306.py driver hardcoded with SPI and Pin assignments.
|
2017-01-09 17:52:42 +01:00 |
|
Glenn Ruben Bakke
|
2ac3b23c0e
|
nrf5/drivers: Updating ili9341 driver to set CS high after cmd or data write.
|
2017-01-09 17:51:16 +01:00 |
|
Glenn Ruben Bakke
|
6b976c410c
|
nrf5/drivers: Extending print function for ili9341 object to also print out gpio port of the SPI pins.
|
2017-01-08 22:35:46 +01:00 |
|
Glenn Ruben Bakke
|
4ca61a9d0e
|
nrf5/boards: Giving a bit more heap for nrf52840 linker script.
|
2017-01-08 22:34:48 +01:00 |
|
Glenn Ruben Bakke
|
9a8bf934c6
|
nrf5/drivers: bugfix of the sld00200p driver. Stopping the pwm instead of restarting it. Shuffle placement of static function.
|
2017-01-08 21:29:13 +01:00 |
|
Glenn Ruben Bakke
|
859380afe8
|
nrf5/drivers: Correcting object print function to also include port number of the SPI pins. Correcting usage script example in comment.
|
2017-01-08 21:27:37 +01:00 |
|
Glenn Ruben Bakke
|
8a69f42f84
|
nrf5/drivers: Adding an initial script as comment for ili9341 on nrf52840/pca10056 in the driver module comment.
|
2017-01-08 21:25:42 +01:00 |
|
Glenn Ruben Bakke
|
06e0f5d081
|
nrf5/examples: Removing tabs from epaper python script usage comment, so that it is easier to copy paste.
|
2017-01-08 21:23:33 +01:00 |
|
Glenn Ruben Bakke
|
b83052f8d1
|
nrf5/hal: Refining if-defs to set up GPIO base pointers in mphalport.h
|
2017-01-08 21:20:59 +01:00 |
|
Glenn Ruben Bakke
|
130f407287
|
nrf5/devices: Removing define which clutters ported modules from nrf.h.
|
2017-01-08 21:20:12 +01:00 |
|
Glenn Ruben Bakke
|
268d988553
|
nrf5/boards: Enabling spi in pca10056 hal config.
|
2017-01-08 21:19:23 +01:00 |
|
Glenn Ruben Bakke
|
c8cc2aa6f9
|
nrf5/boards: Enabling ili9341 display drivers and to be compiled in on pca10056 target board. Updating SPI configuration with gpio port.
|
2017-01-08 21:18:18 +01:00 |
|
Glenn Ruben Bakke
|
bc22cc9ce8
|
nrf5/boards: Enabling display drivers/spi/pwm to be compiled in on pca10040 target board. Updating SPI configuration with gpio port.
|
2017-01-08 21:16:41 +01:00 |
|
Glenn Ruben Bakke
|
0676c9774a
|
nrf5/hal: Correcting SPI psel port position define name to the one defined in nrf52840_bitfields.h
|
2017-01-08 20:31:30 +01:00 |
|
Glenn Ruben Bakke
|
604ae87192
|
nrf5/led: Hardcoding GPIO port 0 for Led module for now.
|
2017-01-08 16:41:48 +01:00 |
|
Glenn Ruben Bakke
|
3e1da27f2b
|
nrf5/hal: Changing import of nrf52 includes in hal_uarte.c to not be explicit. Now only nrf.h is included.
|
2017-01-08 16:41:11 +01:00 |
|
Glenn Ruben Bakke
|
43a2355665
|
nrf5: Updating pin, spi and uart to use port configuration for gpio pins. Update pin generation script, macros for PIN generation. Updating macros for setting pin values adding new port parameter to select the correct GPIO peripheral port.
|
2017-01-08 16:40:18 +01:00 |
|
Glenn Ruben Bakke
|
014e650499
|
nrf5/boards: Disable SPI hal from pca10001 board.
|
2017-01-08 16:28:18 +01:00 |
|
Glenn Ruben Bakke
|
ec44f6427b
|
nrf5/boards: Disable SPI/Timer/RTC hal from microbit board.
|
2017-01-08 16:27:35 +01:00 |
|
Glenn Ruben Bakke
|
8e71bcea07
|
nrf5: Exclude import of pwm.h in modmachine.c if MICROPY_PY_MACHINE_PWM is not set, as nrf51 does not yet have this module yet.
|
2017-01-08 16:26:03 +01:00 |
|
Glenn Ruben Bakke
|
b75cefd383
|
nrf5: Exclude import of pwm.h in main.c if MICROPY_PY_MACHINE_PWM is not set, as nrf51 does not yet have this module yet.
|
2017-01-08 16:25:10 +01:00 |
|
Glenn Ruben Bakke
|
c389872408
|
nrf5/drivers: Block nrf51 from compiling epaper_sld00200p for the moment. There is no soft-pwm present yet, and including pwm would just make compilation fail now.
|
2017-01-08 16:23:00 +01:00 |
|
Glenn Ruben Bakke
|
db9eef64a5
|
nrf5/hal: Making nrf51/2_hal.h go trough nrf.h to find bitfields and other mcu headers instead of explicit include.
|
2017-01-08 16:20:01 +01:00 |
|
Glenn Ruben Bakke
|
392e226b2c
|
nrf5/boards: Adding more pins to nrf52840 / pca10056 target board.
|
2017-01-08 16:16:29 +01:00 |
|
Glenn Ruben Bakke
|
942942780f
|
nrf5/pin: Adding more pins to nrf52_af.csv file for nrf52840. Port '1' will be prefixed 'B'.
|
2017-01-08 16:10:47 +01:00 |
|
Glenn Ruben Bakke
|
ef8e679d77
|
nrf5/pin: Adding PORT_B to Pin port enum to reflect gpio port 1 on nrf52840.
|
2017-01-08 16:08:47 +01:00 |
|
Glenn Ruben Bakke
|
6973c13608
|
nrf5/boards: Updating all board configs with gpio port configuration for uart/spi pins. Leds still not defined by gpio port.
|
2017-01-08 16:04:52 +01:00 |
|
Glenn Ruben Bakke
|
307f95bd03
|
nrf5/devices: Updating header files for nrf51 and nrf52. Adding headers for nrf52840.
|
2017-01-08 15:32:26 +01:00 |
|
Glenn Ruben Bakke
|
19d354ed05
|
nrf5: Updating to use new nrfjprog in makefile. Needed for nrf52840 targets. Changed from pinreset to debug reset.
|
2017-01-08 15:17:03 +01:00 |
|
Glenn Ruben Bakke
|
4f04eed4c5
|
nrf5/boards: Updating makefiles to use system.c files based on sub-variant of mcu.
|
2017-01-08 15:15:36 +01:00 |
|
Glenn Ruben Bakke
|
721065b307
|
nrf5/devices: Renaming system.c files for nrf51 and nrf52 to be more explicit on which version of chip they are referring to.
|
2017-01-08 13:32:13 +01:00 |
|
Glenn Ruben Bakke
|
9214381671
|
nrf5/drivers: Backing up working epaper display (sld00200p shield) driver before refactoring.
|
2017-01-07 00:07:17 +01:00 |
|
Glenn Ruben Bakke
|
a2e2f3c07e
|
nrf5/drivers: Fixing parenthesis in ILI9341 __str__ print function.
|
2017-01-06 23:41:16 +01:00 |
|
Glenn Ruben Bakke
|
ad4149cc80
|
nrf5/pwm: Moving out object types to header file so that it can be resused by other modules.
|
2017-01-06 23:40:23 +01:00 |
|
Glenn Ruben Bakke
|
67683722c8
|
nrf5/drivers: Updating a working version of ili9341 module and driver. About 10 times faster than python implementation to update a full screen.
|
2017-01-06 20:18:00 +01:00 |
|
Glenn Ruben Bakke
|
f92e581e13
|
nrf5: Started to split up lcd_mono_fb such that it can be used as a c-library and python module with the same implementaton.
|
2017-01-06 20:06:09 +01:00 |
|
Glenn Ruben Bakke
|
795df06283
|
nrf5/hal: Adding include of stdbool.h in hal_spi.h as it is used by the header.
|
2017-01-06 19:59:58 +01:00 |
|
Glenn Ruben Bakke
|
62c3f9c1e3
|
nrf5/drivers: Adding preliminary file for ili9341 lcd driver.
|
2017-01-05 21:57:59 +01:00 |
|
Glenn Ruben Bakke
|
042e3653cf
|
nrf5/hal: Adding support for NULL pointer to be set if no rx buffer is of interest in SPI rx_tx function.
|
2017-01-05 21:56:17 +01:00 |
|
Glenn Ruben Bakke
|
a8dc8cb236
|
nrf5: Adding ili9341 class and driver files in Makefile to be included in build.
|
2017-01-05 20:16:24 +01:00 |
|
Glenn Ruben Bakke
|
a62573ad41
|
nrf5/drivers: Adding template files for upcomming ili9341 driver.
|
2017-01-05 20:15:23 +01:00 |
|
Glenn Ruben Bakke
|
5079cb0a25
|
nrf5/drivers: Adding lcd ili9341 object implementation to make a new instance. print implemented for debugging pins assigned to the display driver. No interaction yet with the hal driver.
|
2017-01-05 20:13:51 +01:00 |
|
Glenn Ruben Bakke
|
28539221ce
|
nrf5/drivers: Adding ILI9341 class to the display global dict.
|
2017-01-05 20:01:23 +01:00 |
|
Glenn Ruben Bakke
|
56d187b942
|
nrf5/boards: Changing tft lcd display name from SLD10261P to ILI9341 in pca10040 board configuration.
|
2017-01-05 19:59:25 +01:00 |
|
Glenn Ruben Bakke
|
e7c535b0cb
|
nrf5: Moving out mp_obj_framebuf_t to the header file to get access to it from other modules. Exposing helper function to make new framebuffer object from c-code.
|
2017-01-05 19:58:12 +01:00 |
|
Glenn Ruben Bakke
|
4c24d39122
|
nrf5: Trimming down display configurations in mpconfigport.h
|
2017-01-05 19:56:09 +01:00 |
|
Glenn Ruben Bakke
|
f9ffcfdb7d
|
nrf5/spi: Moving *_spi_obj_t out of implementation file to header. Setting hal init structure in the object structure instead of making a temp struct to configure hal. This would enable lookup of the spi settings later.
|
2017-01-05 19:50:20 +01:00 |
|
Glenn Ruben Bakke
|
b85b3b4e24
|
nrf5: Removing epaper, lcd and oled modules from Makefile source list as the display modules has been moved to display root folder.
|
2017-01-05 10:35:39 +01:00 |
|
Glenn Ruben Bakke
|
aaadec99e0
|
nrf5/drivers: Removing one level of module hierarchy in display drivers. Removed epaper, lcd and oled modules, making import of classes happen directly from display module.
|
2017-01-05 00:49:21 +01:00 |
|
Glenn Ruben Bakke
|
6cddad02a8
|
nrf5/drivers: Creating python object implementation (locals) to be used for epaper sld00200p.
|
2017-01-04 21:10:06 +01:00 |
|
Glenn Ruben Bakke
|
4c0bb63e2b
|
nrf5: Moving color defines in lcd_mono_fb from .c to .h so that it can be reused by other modules.
|
2017-01-04 21:06:51 +01:00 |
|
Glenn Ruben Bakke
|
6a077806c6
|
nrf5: Enable MICROPY_FINALISER and REPL_AUTO_INDENT.
|
2017-01-04 20:11:41 +01:00 |
|
Glenn Ruben Bakke
|
31a54e063a
|
nrf5/drivers: Adding requirement for nrf52 target on the epaper sld00200p for now. There is no ported PWM module for nrf51 target yet. Hence, soft PWM for nrf51 needs to be added.
|
2017-01-04 20:05:01 +01:00 |
|
Glenn Ruben Bakke
|
cc3364db7f
|
nrf5: Adding suffix to _obj on epaper_sld00200p module.
|
2017-01-04 20:00:10 +01:00 |
|
Glenn Ruben Bakke
|
643bf19466
|
nrf5: Correcting define name for epaper sld00200p, missing 0.
|
2017-01-04 19:59:12 +01:00 |
|
Glenn Ruben Bakke
|
d2f5f1fe60
|
nrf5/drivers: Enable EPAPER_SLD00200P in epaper module globals table.
|
2017-01-04 19:57:58 +01:00 |
|
Glenn Ruben Bakke
|
6300c6045a
|
nrf5/drivers: Adding missing file for epaper module / driver.
|
2017-01-04 19:56:53 +01:00 |
|
Glenn Ruben Bakke
|
5875013670
|
nrf5/modules: Moving python scripts to examples folder to free up some flash space on constrained targets as modules folder is used as frozen files folder.
|
2017-01-04 17:27:02 +01:00 |
|
Glenn Ruben Bakke
|
25947a1b00
|
nrf5/boards: Enable display module to be built in. Also adding one epaper display and one tft lcd to test display module when porting the corresponding drivers to micropython.
|
2017-01-04 17:22:58 +01:00 |
|
Glenn Ruben Bakke
|
87f250deec
|
nrf5/drivers: Removing external decleration of display module in header.
|
2017-01-04 17:20:51 +01:00 |
|
Glenn Ruben Bakke
|
2b92438d94
|
nrf5/drivers: Renaming display module to mp_module prefix as it is going to be inbuilt. ifdef'ing all submodules based on type of display configured through mpconfigport.h
|
2017-01-04 17:20:00 +01:00 |
|
Glenn Ruben Bakke
|
6b492cd8c4
|
nrf5/drivers: Adding ifdef sourrounding the implementation of module. Configurable with mpconfigport.h.
|
2017-01-04 17:18:47 +01:00 |
|
Glenn Ruben Bakke
|
bace74fba4
|
nrf5: Adding display module to port builtins.
|
2017-01-04 17:14:44 +01:00 |
|
Glenn Ruben Bakke
|
f97eded57e
|
nrf5/drivers: Adding driver files to makefile. Implicitly adding display module.
|
2017-01-04 17:13:19 +01:00 |
|
Glenn Ruben Bakke
|
bae425ca05
|
nrf5/drivers: Adding template for c-implementation of lcd, epaper and oled drivers as a display module.
|
2017-01-03 22:16:00 +01:00 |
|
Glenn Ruben Bakke
|
5265d70329
|
nrf5/modules: Updating to correct name of display in epaper driver.
|
2017-01-03 21:32:17 +01:00 |
|
Glenn Ruben Bakke
|
ef234503ef
|
nrf5/modules: Adding python epaper display driver. Currently colors have been reversed.
|
2017-01-03 21:25:06 +01:00 |
|
Glenn Ruben Bakke
|
c34127e754
|
nrf5/hal: Fixing bug in mp_hal_pin_read in mphalport.h which tried to read an OUT register. Corrected to read the IN register.
|
2017-01-03 21:17:37 +01:00 |
|
Glenn Ruben Bakke
|
7b6bdc4c2b
|
nrf5: Adding sleep_us to modutime.c and exposing mp_hal_delay_us in hal/hal_time.h
|
2017-01-03 21:15:53 +01:00 |
|
Glenn Ruben Bakke
|
70198b07a5
|
nrf5/lcd: Updating framebuffer with double buffer for epaper displays. Moving statics into instance struct. Adding new function to refresh using old buffer, such that epaper can get a cleaner image after update.
|
2017-01-03 21:12:49 +01:00 |
|
Glenn Ruben Bakke
|
11fc46ca6f
|
nrf5/boards: Adding initial microbit build files and board configurations.
|
2017-01-03 17:02:49 +01:00 |
|
Glenn Ruben Bakke
|
31569dc952
|
nrf5: Makefile option to set FLASHER when doing flash target. If defined in board .mk file, this will be used, else nrfjprog will be used by default (segger). This opens up for using pyocd flashtool and still run 'make flash'.
|
2017-01-03 17:00:06 +01:00 |
|
Glenn Ruben Bakke
|
4b6a12a251
|
nrf5/boards: Updating pca10028 board config to not define RTS/CTS pins when HWFC is set to 0.
|
2017-01-03 16:57:05 +01:00 |
|
Glenn Ruben Bakke
|
994b1689e3
|
nrf5/uart: Making compile time exclusion of RTS/CTS if not defined to use flow control by board configuration.
|
2017-01-03 16:54:33 +01:00 |
|
Glenn Ruben Bakke
|
04751defa0
|
nrf5/spi: Removing automatic chip select (NSS) in hal_spi.c. Also removing configuration of this pin as it is confusing to pass it if not used. User of SPI has to set the NSS/CS itself.
|
2017-01-02 12:51:56 +01:00 |
|
Glenn Ruben Bakke
|
bcb0c9d8cb
|
nrf5/modules: Updating PWM test python script to cope with new api.
|
2016-12-31 17:21:38 +01:00 |
|
Glenn Ruben Bakke
|
1bc50dbeb5
|
nrf5/hal: Fixing some issues in PWM stop function. Doing a proper stop and disable the peripheral.
|
2016-12-31 17:20:54 +01:00 |
|
Glenn Ruben Bakke
|
3d120ac103
|
nrf5/pwm: Implementing start and stop call to hal on init and deinit as hal_init does not longer start the PWM automatically.
|
2016-12-31 17:07:30 +01:00 |
|
Glenn Ruben Bakke
|
5e322ea078
|
nrf5/hal: Exposing two new PWM hal functions start() and stop().
|
2016-12-31 17:06:07 +01:00 |
|
Glenn Ruben Bakke
|
c5d77f0e7e
|
nrf5/hal: Moving enablement of PWM task from init to a start function. Also activating code in stop function to stop the PWM.
|
2016-12-31 17:05:32 +01:00 |
|
Glenn Ruben Bakke
|
38607ee445
|
nrf5/modules: Adding licence text on seeedstudio tft shield python modules.
|
2016-12-31 14:02:05 +01:00 |
|
Glenn Ruben Bakke
|
520105aaa7
|
nrf52/boards: Tuning linker script for nrf52832 when using iot softdevice. Need more heap for LCD framebuffer.
|
2016-12-29 17:08:16 +01:00 |
|
Glenn Ruben Bakke
|
64d2827233
|
nrf5/lcd: Adding lcd_mono_fb.c to source list in the makefile. Adding define in implementation to de-select the file from being included. Adding module to PORT BUILTIN in mpconfigport.h
|
2016-12-29 17:03:15 +01:00 |
|
Glenn Ruben Bakke
|
a7832a203f
|
nrf52/sdk: Correcting path to iot softdevice if SDK is enabled.
|
2016-12-29 16:48:47 +01:00 |
|
Glenn Ruben Bakke
|
387725ce60
|
nrf5: Adding help text for CTRL-D (soft reset) and and CTRL-E (paste mode) in help.c
|
2016-12-29 16:12:54 +01:00 |
|
Glenn Ruben Bakke
|
342ffadc59
|
nrf5: Adding handling of CTRL+D to reset chip in main.c. Call to NVIC System Reset is issued.
|
2016-12-29 16:11:59 +01:00 |
|
Glenn Ruben Bakke
|
82746d4549
|
nrf5/lcd: Correcting indention (tabs with space) in framebuffer module source and header.
|
2016-12-29 15:54:47 +01:00 |
|
Glenn Ruben Bakke
|
c8ff22ced0
|
nrf5/lcd: Changing framebuffer to use petme128 8x8 font. This is vertical font. Code modified to flip and mirror the font when rendering a character. Adding copy of the font from stmhal.
|
2016-12-29 15:35:24 +01:00 |
|
Glenn Ruben Bakke
|
af116d1d80
|
nrf5/modules: Adding new driver for seeedstudio tft shield v2, using new framebuffer module which handles faster update on single lines, callback driven write on each line which is touched in the framebuffer.
|
2016-12-29 14:39:41 +01:00 |
|
Glenn Ruben Bakke
|
0626371378
|
nrf5/lcd: Adding header file for lcd_mono_fb.
|
2016-12-29 14:31:56 +01:00 |
|
Glenn Ruben Bakke
|
6179abd6f7
|
nrf5/lcd: Updating brackets in framebuffer module.
|
2016-12-29 14:30:24 +01:00 |
|
Glenn Ruben Bakke
|
85c9db4bcd
|
nrf5/lcd: Renaming variable name from m_ to p_
|
2016-12-29 14:26:26 +01:00 |
|
Glenn Ruben Bakke
|
d14a72795c
|
nrf5/lcd: Cleaning up a bit in lcd framebuffer.
|
2016-12-29 14:25:30 +01:00 |
|
Glenn Ruben Bakke
|
88e45f85c3
|
nrf5/lcd: Adding work in progress monochrome lcd framebuffer driver which only updates modified (dirty) display lines.
|
2016-12-29 13:03:47 +01:00 |
|
Glenn Ruben Bakke
|
02203389c2
|
nrf5/modules: Updating pulse test to set output direction on the LED pin used in the test.
|
2016-12-29 08:53:38 +01:00 |
|
Glenn Ruben Bakke
|
cfbe91a709
|
nrf5/modules: Updating seeedstudio tft lcd driver to render using already existing framebuffer implementation.
|
2016-12-29 08:52:32 +01:00 |
|
Glenn Ruben Bakke
|
5f4cf7b908
|
nrf5/boards: Bouncing up heap to 32k on pca10040 to allow for application to allocate 9600bytes+ framebuffer when using LCD screen (240x320).
|
2016-12-29 08:49:20 +01:00 |
|
Glenn Ruben Bakke
|
d2969048ff
|
nrf5/modules: Adding a function to get access to the SD card flash drive on the seeedstudio tft shield.
|
2016-12-27 16:05:49 +01:00 |
|
Glenn Ruben Bakke
|
cceea0a504
|
nrf5/modules: Adding new python script to initialize and clear the display on Seeedstudio 2.8 TFT Touch Shield v2.
|
2016-12-27 15:47:55 +01:00 |
|
Glenn Ruben Bakke
|
db994e2ec0
|
nrf5/modules: Updating documentation on sdcard.py copy to use new params in the example description
|
2016-12-27 15:44:39 +01:00 |
|
Glenn Ruben Bakke
|
9197739cf4
|
nrf5/modules: Updating mountsd, SD card test script with new params.
|
2016-12-27 15:42:35 +01:00 |
|
Glenn Ruben Bakke
|
d6300a2e82
|
nrf5/pin: Merging input and output pin configuration to one comon function. Adding implementation in Pin class to be able to configure mode and pull. Updating drivers which uses gpio pin configuration to use new function parameters.
|
2016-12-27 15:40:20 +01:00 |
|
Glenn Ruben Bakke
|
4fee95c468
|
nrf5: Adding rtc.c which implements the machine rtc module to be included in build.
|
2016-12-26 16:53:24 +01:00 |
|
Glenn Ruben Bakke
|
46ddf2ed70
|
nrf5/boards: Enable MICROPY_PY_MACHINE_RTC in pca10028 (nrf51) and pca10040 (nrf52) targets.
|
2016-12-26 16:50:59 +01:00 |
|
Glenn Ruben Bakke
|
c2d2958205
|
nrf5/hal: Adding empty init function in hal_rtc.c
|
2016-12-26 16:49:27 +01:00 |
|
Glenn Ruben Bakke
|
22c62fb53f
|
nrf5/hal: Adding structures and init function prototype to hal_rtc.h.
|
2016-12-26 16:48:56 +01:00 |
|
Glenn Ruben Bakke
|
d78d717733
|
nrf5: Setting MICROPY_PY_MACHINE_RTC to disabled by default (during development) in mpconfigport.h. This can be overriden by board config.
|
2016-12-26 16:47:56 +01:00 |
|
Glenn Ruben Bakke
|
bab030d793
|
nrf5/rtc: Adding skeleton for machine rtc module for nrf51/52.
|
2016-12-26 16:46:23 +01:00 |
|
Glenn Ruben Bakke
|
d79588ddf4
|
nrf5: Adding timer.c which implements the machine timer module to be included in build.
|
2016-12-26 16:20:36 +01:00 |
|
Glenn Ruben Bakke
|
a3cc6abba6
|
nrf5: Setting MICROPY_PY_MACHINE_TIMER to disabled by default (during development) in mpconfigport.h. This can be overriden by board config.
|
2016-12-26 16:19:48 +01:00 |
|
Glenn Ruben Bakke
|
8e7f9d7c38
|
nrf5/boards: Enable MICROPY_PY_MACHINE_TIMER in pca10028 (nrf51) and pca10040 (nrf52) targets.
|
2016-12-26 16:18:16 +01:00 |
|
Glenn Ruben Bakke
|
e4365fcac4
|
nrf5: Adding initialization of timer module if enabled by MICROPY_PY_MACHINE_TIMER.
|
2016-12-26 16:15:26 +01:00 |
|
Glenn Ruben Bakke
|
9c828c7630
|
nrf5/timer: Adding initializaton of id field for Timer_HandleTypeDef's. Adding simple print function. Adding make_new function. Enabling the functions in machine_timer_type.
|
2016-12-26 16:13:09 +01:00 |
|
Glenn Ruben Bakke
|
53fdcf91d7
|
nrf5/hal: Adding empty init function in hal_timer.c
|
2016-12-26 16:08:59 +01:00 |
|
Glenn Ruben Bakke
|
9b084fc376
|
nrf5/hal: Adding structures and init function prototype to hal_timer.h.
|
2016-12-26 16:08:22 +01:00 |
|
Glenn Ruben Bakke
|
8cce985765
|
nrf5/timer: Adding skeleton for machine timer module for nrf51/52.
|
2016-12-26 14:03:50 +01:00 |
|
Glenn Ruben Bakke
|
5c327f2f2f
|
nrf/boards: Adding RTC and TIMER hal to be linked in when implemented. Enable one board for nrf51 and one for nrf52 for ease of debugging when implementing the hal.
|
2016-12-25 18:15:32 +01:00 |
|
Glenn Ruben Bakke
|
1e79ccf305
|
nrf5: Adding rtc and timer hal to Makefile.
|
2016-12-25 18:12:51 +01:00 |
|
Glenn Ruben Bakke
|
1264122e76
|
nrf5/hal: Adding skeleton files for rtc and timer driver.
|
2016-12-25 18:10:31 +01:00 |
|
Glenn Ruben Bakke
|
c1c78404b6
|
nrf5/modules: Updating pulse example to work with Pin object instead of hard coded pin number.
|
2016-12-24 01:16:23 +01:00 |
|
Glenn Ruben Bakke
|
d759123886
|
nrf5/pwm: Switching from hardcoded pin number to Pin object type as input to the new() function. Also changing the parameter from kw to arg.
|
2016-12-24 01:15:37 +01:00 |
|
Glenn Ruben Bakke
|
3191a31ce8
|
nrf5/modules: updating test python file with correct PWM frequency type.
|
2016-12-24 00:30:35 +01:00 |
|
Glenn Ruben Bakke
|
2db3f0deb7
|
nrf5/modules: Adding a python test file with function to dim a specific led (17).
|
2016-12-20 23:21:17 +01:00 |
|
Glenn Ruben Bakke
|
0999226103
|
nrf5/pwm: Updating pwm module with freq function which re-initilises the PWM instance such that new frequency will be applied.
|
2016-12-20 23:15:26 +01:00 |
|
Glenn Ruben Bakke
|
db1faf85f7
|
nrf5/pwm: Initializing pwm instances in main.c if enabled by MICROPY_PY_MACHINE_PWM.
|
2016-12-19 17:10:48 +01:00 |
|
Glenn Ruben Bakke
|
faa1b77844
|
nrf5/pwm: Adding api to initialize pwm instances.
|
2016-12-19 17:09:46 +01:00 |
|
Glenn Ruben Bakke
|
b4dc9254ac
|
nrf5: Updating mpconfigport.h to set a default for PWM machine module to be enabled by default, if not disabled in a board config. Refactoring order in the file.
|
2016-12-17 01:29:12 +01:00 |
|
Glenn Ruben Bakke
|
b350dc5198
|
nrf52: Set names to be used on PWM0-2 in board config. For nrf52840, the PWM3 is excluded as repo does not have latest headers to reflect this yet. Bump up to be done soon.
|
2016-12-17 01:27:58 +01:00 |
|
Glenn Ruben Bakke
|
dd9812e1e9
|
nrf52: Enable PWM HAL for both pca10040 (nrf52832) and pca10056 (nrf52840).
|
2016-12-17 01:21:32 +01:00 |
|
Glenn Ruben Bakke
|
275bf46831
|
nrf51: Disable MICROPY_PY_MACHINE_PWM for now in all nrf51 target boards as sw impl. is not yet included in the repo.
|
2016-12-17 01:19:44 +01:00 |
|
Glenn Ruben Bakke
|
18f528eceb
|
nrf5: Only enable hal_pwm.c if nrf52 target as nrf51 must have a sw implementation.
|
2016-12-17 01:16:38 +01:00 |
|
Glenn Ruben Bakke
|
3bf2ca05f1
|
nrf5/pwm: Adding pwm to modmachine.c
|
2016-12-17 01:14:50 +01:00 |
|
Glenn Ruben Bakke
|
abd945fde1
|
nrf5/hal: Updating PWM header file with init function prototype. Also added PWM_HandleTypeDef structure that can be used in the pwm python module.
|
2016-12-17 01:05:43 +01:00 |
|
Glenn Ruben Bakke
|
7bfe001d22
|
nrf5/pwm: Updating PWM dict table to have freq and duty function. Also added creation of default objects based on PWM name set in board config. Adding ifdef surrounding the import of hal_pwm.h as this module might be used by software implmentation of PWM later.
|
2016-12-17 01:03:39 +01:00 |
|
Glenn Ruben Bakke
|
a081bf2f91
|
nrf5/pwm: Removing include of hal_pwm.h as pwm.c might not use a hal, but sw implementation.
|
2016-12-17 00:39:24 +01:00 |
|
Glenn Ruben Bakke
|
eaece2734b
|
nrf5: Updating makefile to compile in pwm.c and hal_pwm.c
|
2016-12-16 19:56:12 +01:00 |
|
Glenn Ruben Bakke
|
36a232182a
|
nrf5/boards: Adding config flag for HAL_PWM in pca10040 and pca10056.
|
2016-12-16 19:56:00 +01:00 |
|
Glenn Ruben Bakke
|
930112753a
|
nrf5: Adding pwm work in progress machine PWM module.
|
2016-12-16 19:55:32 +01:00 |
|
Glenn Ruben Bakke
|
82f7fe88b0
|
nrf5/hal: Starting implementation of PWM hal to be used by PWM python module later.
|
2016-12-16 19:17:42 +01:00 |
|
Glenn Ruben Bakke
|
90730787f3
|
nrf5: Adding initial board files for pca10056. The files are not complete (only 32 pins are added for now). UART REPL, leds, and Pins (up to 31) are functional.
|
2016-12-13 21:38:39 +01:00 |
|
Glenn Ruben Bakke
|
bc1aa84cac
|
nrf5: Updating comment in linker script for nrf52832 and nrf52840 to distinguish between the two nrf52 variants.
|
2016-12-13 21:35:15 +01:00 |
|
Glenn Ruben Bakke
|
faa460ae88
|
nrf5: Adding new linker script for nrf52840.
|
2016-12-13 21:32:40 +01:00 |
|
Glenn Ruben Bakke
|
1a1f9b0c9d
|
nrf5: updating flash size comment in nrf52832 linker script.
|
2016-12-13 21:31:39 +01:00 |
|
Glenn Ruben Bakke
|
d7dc0b789d
|
nrf5: Updating port with new content. SPI, SDcard (trough sdcard.py), Pin, and machine module. Also adding some basic modules depending on SDK and bluetooth stack from nordic semiconductor. NUS is module copied from original port by tralamazza, and new basic module for 6lowpan over BLE which can be used by modnetwork and modusocket. Basic BLE module to enable bluetooth stack and start a eddystone advertisment is kept, and still works without SDK, even if in the SDK folder (its placed there as it needs bluetooth stack from an SDK).
|
2016-12-13 20:27:26 +01:00 |
|
Glenn Ruben Bakke
|
227998f9cd
|
Renaming softdevice folder to sdk.
|
2016-12-13 20:14:48 +01:00 |
|
Glenn Ruben Bakke
|
ea75d9919f
|
Removing unused 'NRF_SOFTDEVICE' compile variable from all board .mk softdevice targets.
|
2016-11-17 00:33:37 +01:00 |
|